Silicone is a polymer of – (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Silicone is a polymer of – (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane
by

1 Answer

Answer :

(3) Dialkyl dichloro silane Explanation: In order to manufacture silicones, alkyl-substituted chlorosilanes are used as starting material. Since dimethylsilane contains —OH group at the end of the chain, polymerization and chain length increases. However, the hydrolysis of alkyl trichlorosilane gives very complex cross linked polymer.
by
selected

Related questions

Silicone is a polymer of (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Description : Silicone is a polymer of (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Last Answer : Dialkyl dichloro silane

What are the chemical signals of silicon tetrachloride ?

Last Answer : : The chemical symbol of silicon tetachloride is SiCl4

Carbon tetrachloride can be stored in a storage vessel made of (A) High silicon iron (14% Si) (B) Tin (C) Stainless steel (D) All (A), (B) and (C)

Description : Carbon tetrachloride can be stored in a storage vessel made of (A) High silicon iron (14% Si) (B) Tin (C) Stainless steel (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Description : Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Last Answer : (B) Inorganic polymer

Tubeless tyres are made of __________ rubber, which is a co-polymer of isoprene & isobutylene. (A) Nitrile (B) Silicone (C) Neoprene (D) Buty

Description : Tubeless tyres are made of __________ rubber, which is a co-polymer of isoprene & isobutylene. (A) Nitrile (B) Silicone (C) Neoprene (D) Buty

Last Answer : (D) Buty

The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Description : The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Last Answer : (C) Initial hydrolysis of silicone monomer

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Last Answer : (C) A synthetic polymer

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Last Answer : (B) A synthetic polymer

Silicone is a/an (A) Thermoplastic (B) Inorganic polymer (C) Monomer (D) None of these

Description : Silicone is a/an (A) Thermoplastic (B) Inorganic polymer (C) Monomer (D) None of these

Last Answer : (B) Inorganic polymer

The Refrigerant 'FREON' is – (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Description : The Refrigerant 'FREON' is – (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Last Answer : (2) Difluoro Dichloro Methane Explanation: Dichlorodifluorornethane (R-12), is a colourless gas, and usually sold under the brand name Freon-12, is a chlorofluorocarbon halornethane (CFC), used as a ... 1994 clue to concerns about damage to the ozone layer. It is soluble in many organic solvents.

The Refrigerant ‘FREON' is (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Description : The Refrigerant ‘FREON' is (1) Calcium Tetra Fluoride (2) Difluoro Dichloro Methane (3) Fluorspar and Felspar (4) Hydrofluosilicic Acid

Last Answer : Difluoro Dichloro Methane

Which of the following rubbers has the widest service temperature range (-75 to 275°C)? (A) Butyl rubber (B) Silicon rubber (C) Nitrile rubber (D) Silicone rubber

Description : Which of the following rubbers has the widest service temperature range (-75 to 275°C)? (A) Butyl rubber (B) Silicon rubber (C) Nitrile rubber (D) Silicone rubber

Last Answer : (D) Silicone rubber

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

What is the equation of the thermal decomposition of silane?

Description : What is the equation of the thermal decomposition of silane?

Last Answer : The chemical equation is:SiH4 = Si + 2 H2

Dichloro diphenyl __________ is the full form of DDT (an insecticide).(A) Tetrachloroethane (B) Trichloroethane (C) Tetrachloromethane (D) Trichloromethane

Description : Dichloro diphenyl __________ is the full form of DDT (an insecticide). (A) Tetrachloroethane (B) Trichloroethane (C) Tetrachloromethane (D) Trichloromethane

Last Answer : (B) Trichloroethane

DDT stands for (A) Diethyl-diphenyl-trichloromethane (B) Dichloro-diphenyl-trichloromethane (C) diphenyl-dichloro-trichloromethane (D) Dichloro-diphenyl-trichloroethane

Description : DDT stands for (A) Diethyl-diphenyl-trichloromethane (B) Dichloro-diphenyl-trichloromethane (C) diphenyl-dichloro-trichloromethane (D) Dichloro-diphenyl-trichloroethane

Last Answer : (D) Dichloro-diphenyl-trichloroethane

Which among the following is a covalent compound? (1) Calcium chloride (2) Magnesium fluoride (3) Sodium chloride (4) Carbon tetrachloride

Description : Which among the following is a covalent compound? (1) Calcium chloride (2) Magnesium fluoride (3) Sodium chloride (4) Carbon tetrachloride

Last Answer : (4) Carbon tetrachloride Explanation: Ionic compounds are made up of a metal and non-metal, and covalent compounds are made up of two nonmetals

Vinegar is the trade name of - (1) acetic acid (2) chloroform (3) carbon tetrachloride (4) ethyl alcohol

Description : Vinegar is the trade name of - (1) acetic acid (2) chloroform (3) carbon tetrachloride (4) ethyl alcohol

Last Answer : (1) acetic acid Explanation: The trivial name acetic acid is the most commonly used and preferred IUPAC name. The systematic name ethanoic acid, a valid IUPAC name, is constructed according to the substitutive nomenclature.

Name the technique used to separate water from carbon tetrachloride?

Description : Name the technique used to separate water from carbon tetrachloride?

Last Answer : Water and carbon tetrachloride could be separated using a separating funnel, since the two are immiscible and heavier carbon tetrachloride forms the lower layer.

DDT is prepared by the reaction of chlorobenzene with (in the presence of conc. H2SO4) (a) Chloral (b) Chlorine (c) Chloroform (d) Carbon tetrachloride

Description : DDT is prepared by the reaction of chlorobenzene with (in the presence of conc. H2SO4) (a) Chloral (b) Chlorine (c) Chloroform (d) Carbon tetrachloride

Last Answer : Chloral

Which of the following compounds has maximum dipole moment?(a) p-Dichlorobenzene (b) m-Dichlorobenzene (c) o-Dichlorobenzene (d) Carbon tetrachloride

Description : Which of the following compounds has maximum dipole moment? (a) p-Dichlorobenzene (b) m-Dichlorobenzene (c) o-Dichlorobenzene (d) Carbon tetrachloride

Last Answer : o-Dichlorobenzene

Which of the following molecules will decolorize bromine in carbon tetrachloride most readily? (a) 1,2-Dimethylcyclopropane (b) Cyclopentane (c) 1,2-Dimethylcyclobutane (d) Cyclohexane

Description : Which of the following molecules will decolorize bromine in carbon tetrachloride most readily? (a) 1,2-Dimethylcyclopropane (b) Cyclopentane (c) 1,2-Dimethylcyclobutane (d) Cyclohexane

Last Answer : 1,2-Dimethylcyclopropane

Which of the following will give a negative test when treated with bromine in carbon tetrachloride? (a) Butane (b) 2-Butene (c) 1,3-Butadiene (d) 2-Butyne

Description : Which of the following will give a negative test when treated with bromine in carbon tetrachloride? (a) Butane (b) 2-Butene (c) 1,3-Butadiene (d) 2-Butyne

Last Answer : Butane

. In which solvent are alkenes most soluble? (a) water (b) ethyl alcohol (c) ammonia (d) carbon tetrachloride

Description : . In which solvent are alkenes most soluble? (a) water (b) ethyl alcohol (c) ammonia (d) carbon tetrachloride

Last Answer : carbon tetrachloride

Which of the following compounds have highest dipole moment? (a) dichloromethane (b) chloroform (c) chloromethane (d) carbon tetrachloride

Description : Which of the following compounds have highest dipole moment? (a) dichloromethane (b) chloroform (c) chloromethane (d) carbon tetrachloride

Last Answer : dichloromethane

Which of the following compounds have lowest dipole moment? (a) carbon tetrachloride(b) chloromethane(c) dichloromethane(d) chloroform

Description : Which of the following compounds have lowest dipole moment? (a) carbon tetrachloride (b) chloromethane (c) dichloromethane (d) chloroform

Last Answer : carbon tetrachloride

Which of the following would you expect to have the highest boiling point? w) methane x) carbon tetrachloride y) chloroform z) chloromethane

Description : Which of the following would you expect to have the highest boiling point? w) methane x) carbon tetrachloride y) chloroform z) chloromethane

Last Answer : ANSWER: X -- CARBON TETRACHLORIDE

Which of the following would be least soluble in water? w) Carbon Tetrachloride x) Sodium Oxide y) Magnesium Bromide z) Potassium Phosphate

Description : Which of the following would be least soluble in water? w) Carbon Tetrachloride x) Sodium Oxide y) Magnesium Bromide z) Potassium Phosphate

Last Answer : ANSWER: W -- CARBON TETRACHLORIDE 

Which one of the following molecules exhibits resonance? w) Carbon Tetrachloride x) Carbonate ion y) Sulfur Dichloride z) Phosphorus Tribromide

Description : Which one of the following molecules exhibits resonance? w) Carbon Tetrachloride x) Carbonate ion y) Sulfur Dichloride z) Phosphorus Tribromide

Last Answer : ANSWER: X -- CARBONATE ION

This noncombustible liquid in its dry form is noncorrosive to common metals except aluminum. About 90% of all of this material which is manufactured goes into the production of chlorofluorocarbons. Is this substance: w) carbon tetrachloride x) methylene chloride y) hydrogen chloride z) methyl fluoride

Description : This noncombustible liquid in its dry form is noncorrosive to common metals except aluminum. About 90% of all of this material which is manufactured goes into the production of chlorofluorocarbons. ... substance: w) carbon tetrachloride x) methylene chloride y) hydrogen chloride z) methyl fluoride

Last Answer : ANSWER: W -- CARBON TETRACHLORIDE

Which among the following is a covalent compound ? (1) Calcium chloride (2) Magnesium fluoride (3) Sodium chloride (4) Carbon tetrachloride

Description : Which among the following is a covalent compound ? (1) Calcium chloride (2) Magnesium fluoride (3) Sodium chloride (4) Carbon tetrachloride

Last Answer : Carbon tetrachloride

What is the physical condition of silicone ?

Description : What is the physical condition of silicone ?

Last Answer : The physical state of silicon is a dark gray solid.

What is the compatibility of silicone ?

Description : What is the compatibility of silicone ?

Last Answer : Silicon valence 4 .

What is the symbol of silicone ?

Description : What is the symbol of silicone ?

Last Answer : Si is the symbol of silicon .

Is carbon tetrachloride a molecular or ionic?

Description : Is carbon tetrachloride a molecular or ionic?

Last Answer : Carbon tetrachloride is a covalent compound.

Is carbon tetrachloride element?

Description : Is carbon tetrachloride element?

Last Answer : Carbon tetrachloride is a chemical compound.

Is sulphur soluble in carbon tetrachloride?

Description : Is sulphur soluble in carbon tetrachloride?

Last Answer : Sulfur is soluble in carbon tetrachloride.

The Green House Effect is caused by an excess of _____ A. Carbon dioxide B. Carbon monoxide C. Carbon tetrachloride D. None of the above

Description : The Green House Effect is caused by an excess of _____ A. Carbon dioxide B. Carbon monoxide C. Carbon tetrachloride D. None of the above

Last Answer : ANSWER: A

Consider the following chemicals: 1. Benzene 2. Carbon tetrachloride 3. Sodium carbonate 4. Trichloroethylene The chemicals used as dry cleaning agent(s) is/are (a) 1 only (b) 2 only (c) 1, 2 and 4 only (d) 1, 2, 3 and 4

Description : Consider the following chemicals: 1. Benzene 2. Carbon tetrachloride 3. Sodium carbonate 4. Trichloroethylene The chemicals used as dry cleaning agent(s) is/are (a) 1 only (b) 2 only (c) 1, 2 and 4 only (d) 1, 2, 3 and 4

Last Answer : Ans:(c)

If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry in an oven C. soak it in a bucket of commercial solvent and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Description : If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry ... and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Last Answer : Answer: B

To repair a small electrical motor that has been submerged in saltwater, you should _____________. A. wash it with fresh water and apply an external source of heat B. renew the windings C. send it ashore to an approved service facility D. rinse all electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air

Description : To repair a small electrical motor that has been submerged in saltwater, you should _____________. A. wash it with fresh water and apply an external source of heat B. renew the windings ... electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air

Last Answer : Answer: A

Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components with a soft cotton rag. B. Blowing a high velocity stream of compressed air rapidly across the components. C. Using a vacuum cleaner to remove debris from the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Description : Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components ... the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Last Answer : Answer: C

What is the commercial name of acety- lene tetrachloride?

Description : What is the commercial name of acety- lene tetrachloride?

Last Answer : Westrol

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Description : The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Last Answer : (D) Carbon dioxide

Centrilobular necrosis is associated with C A. Halothane B. Thorazine C. Carbon tetrachloride D. None of these

Description : Centrilobular necrosis is associated with C A. Halothane B. Thorazine C. Carbon tetrachloride D. None of these

Last Answer : Carbon tetrachloride

The liquid used for the washing of coal in an industrial coal washery is a mixture of water and (A) Carbon tetrachloride (B) Sand (40%) (C) Mineral oil of high viscosity & specific gravity (1.6) (D) None of these

Description : The liquid used for the washing of coal in an industrial coal washery is a mixture of water and (A) Carbon tetrachloride (B) Sand (40%) (C) Mineral oil of high viscosity & specific gravity (1.6) (D) None of these

Last Answer : (B) Sand (40%)

A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then for the same flow rate of water the new manometer reading will be __________ cms. (A) 17 (B) 42(C) 84 (D) 1.8

Description : A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then ... new manometer reading will be __________ cms. (A) 17 (B) 42 (C) 84 (D) 1.8

Last Answer : __________ cms. (A) 17