Silicone is a/an (A) Thermoplastic (B) Inorganic polymer (C) Monomer (D) None of these

Silicone is a/an
(A) Thermoplastic
(B) Inorganic polymer
(C) Monomer
(D) None of these
by

1 Answer

Answer :

(B) Inorganic polymer
by

Related questions

Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Description : Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Last Answer : (B) Inorganic polymer

The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Description : The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Last Answer : (C) Initial hydrolysis of silicone monomer

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Last Answer : (B) A synthetic polymer

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Last Answer : (C) Polytetrafluroethylene (PTFE)

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Last Answer : (C) Poly tetra-fluoro-ethylene (P.T.F.E.)

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Description : Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Last Answer : (C) Neoprene is a natural rubber

Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Description : Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Last Answer : (D) None of these

__________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Description : __________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Last Answer : (B) Melamine

Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Last Answer : (A) Epoxy polymer

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Description : Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Last Answer : (A) Polymers made of only one monomer is called homopolyme

What is Thermoplastic Polymer ?

Description : What is Thermoplastic Polymer ?

Last Answer : Polypropylene thermoplastic polymer.

The material which can be deformed permanently by heat and pressure is called a (1) thermoset (2) thermoplastic (3) chemical compound (4) polymer

Description : The material which can be deformed permanently by heat and pressure is called a (1) thermoset (2) thermoplastic (3) chemical compound (4) polymer

Last Answer : (1) thermoset Explanation: A thermosetting polymer, resin, or plastic, often called a thermoset, is a polymer that is irreversibly hardened by curing from a soft solid or viscous liquid prepolymer or resin.

The material which can be deformed permanently by heat and pressure is called a: (1) Thermoplastic (2) Thermoset (3) Chemical compound (4) Polymer

Description : The material which can be deformed permanently by heat and pressure is called a: (1) Thermoplastic (2) Thermoset (3) Chemical compound (4) Polymer

Last Answer : (2) Thermoset Explanation: Thermoset materials are those materials that are made by polymers joined together by chemical bonds, acquiring a highly cross linked polymer structure. They cannot melt.

Tubeless tyres are made of __________ rubber, which is a co-polymer of isoprene & isobutylene. (A) Nitrile (B) Silicone (C) Neoprene (D) Buty

Description : Tubeless tyres are made of __________ rubber, which is a co-polymer of isoprene & isobutylene. (A) Nitrile (B) Silicone (C) Neoprene (D) Buty

Last Answer : (D) Buty

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Last Answer : (C) A synthetic polymer

Teflon is a polymer, monomer of which is:

Description : Teflon is a polymer, monomer of which is:

Last Answer : Teflon is a polymer, monomer of which is: A. difluroethane B. monofluoroethane C. tetrafluoroethene D. tetrafluoroethane

Write the monomer of Glyptal polymer.

Description : Write the monomer of Glyptal polymer.

Last Answer : Ans: (a) Ethylene glycol (b) Phthalic acid 

Neoprene is a polymer of the following monomer (a) Chloroprene (b) Isoprene(c) Isobutane(d) Isopentene

Description : Neoprene is a polymer of the following monomer (a) Chloroprene (b) Isoprene (c) Isobutane (d) Isopentene

Last Answer : Chloroprene

Pick up the correct statement from the following: (A) The substance which consists of one primary chemical, is known as monomer (B) The polymer consists of thousands of monomers joined together (C) The polymer molecule is called macro-molecule (D) All the above

Description : Pick up the correct statement from the following: (A) The substance which consists of one primary chemical, is known as monomer (B) The polymer consists of thousands of monomers joined together (C) The polymer molecule is called macro-molecule (D) All the above

Last Answer : Answer: Option D

Silicone is a polymer of – (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Description : Silicone is a polymer of – (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Last Answer : (3) Dialkyl dichloro silane Explanation: In order to manufacture silicones, alkyl-substituted chlorosilanes are used as starting material. Since dimethylsilane contains -OH group at the end of ... increases. However, the hydrolysis of alkyl trichlorosilane gives very complex cross linked polymer.

Silicone is a polymer of (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Description : Silicone is a polymer of (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Last Answer : Dialkyl dichloro silane

Which of the following is an inorganic polymer? (A) Teflon (B) Perspex (C) Silicones (D) Bakelite

Description : Which of the following is an inorganic polymer? (A) Teflon (B) Perspex (C) Silicones (D) Bakelite

Last Answer : (C) Silicones

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermoset phenol formaldehyde

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermosetting phenol-formaldehyde

Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Last Answer : (A) Polyester

Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Description : Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Last Answer : (B) Thermosetting

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

The only natural thermoplastic resin, which is a product of animal life is (A) Rosin (B) Shellac (C) Amber (D) Copal

Description : The only natural thermoplastic resin, which is a product of animal life is (A) Rosin (B) Shellac (C) Amber (D) Copal

Last Answer : (B) Shellac

Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Description : Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Last Answer : (B) Thermoplastic

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets

Polystyrene is a light, transparent, thermoplastic material used for making (A) Toys and combs (B) Packaging bags (C) Non-sticking utensils (D) Electrical insulation

Description : Polystyrene is a light, transparent, thermoplastic material used for making (A) Toys and combs (B) Packaging bags (C) Non-sticking utensils (D) Electrical insulation

Last Answer : (A) Toys and combs

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Thermoplastic resins usually(A) Remain hard as long as they are hot(B) Cannot be reclaimed from waste(C) Permanent setting resins(D) Less brittle than thermosetting resins

Description : Thermoplastic resins usually (A) Remain hard as long as they are hot (B) Cannot be reclaimed from waste (C) Permanent setting resins (D) Less brittle than thermosetting resins

Last Answer : (D) Less brittle than thermosetting resins

Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Description : Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Last Answer : (C) Steel or iron

Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Description : Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Last Answer : (C) Easily deform under pressure at high temperature

__________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Last Answer : (C) Injection

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Description : Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Last Answer : (B) Thermoplastic

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Description : Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Last Answer : Option D

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation