In a refrigerator, the cooling system should always be (1) at the top (2) at the bottom (3) at the middle (4) can be anywhere

In a refrigerator, the cooling system should always be (1) at the top (2) at the bottom (3) at the middle (4) can be anywhere
by

1 Answer

Answer :

at the bottom
by

Related questions

In a refrigerator, the cooling system should always be – (1) at the top (2) at the bottom (3) at the middle (4) can be anywhere

Description : In a refrigerator, the cooling system should always be – (1) at the top (2) at the bottom (3) at the middle (4) can be anywhere

Last Answer : (2) at the bottom Explanation: The compressor is the motor (or engine) of the cooling system. It is normally at the bottom of the refrigerator in the back. The compressor runs whenever the refrigerator thermostat calls for cooling.

The freezer in a refrigerator is fitted near the top (a) to keep it away from the hot compressor which is near the bottom (b) because of convenience (c) so that it can cool the whole interior by setting up convection currents (d) without any specific purpose

Description : The freezer in a refrigerator is fitted near the top (a) to keep it away from the hot compressor which is near the bottom (b) because of convenience (c) so that it can cool the whole interior by setting up convection currents (d) without any specific purpose

Last Answer : Ans:(c)

The freezer in a refrigerator is fitted near the top – (1) to keep it away from hot compressor which is nearer to the bottom (2) because of convenience (3) it facilitates convection currents (4) to minimise power consumption

Description : The freezer in a refrigerator is fitted near the top – (1) to keep it away from hot compressor which is nearer to the bottom (2) because of convenience (3) it facilitates convection currents (4) to minimise power consumption

Last Answer : (3) it facilitates convection currents Explanation: The freezer in a refrigerator is fitted near the top so that it can cool the whole interior by setting up ... compartment temperature excessively causes difficulties in maintaining above-reezing temperature in the refrigerator compartment.

The freezer in a refrigerator is fitted near the top (1) to keep it away from hot compressor which is nearer to the bottom (2) because of convenience (3) it facilitates convection currents (4) to minimise power consumption

Description : The freezer in a refrigerator is fitted near the top (1) to keep it away from hot compressor which is nearer to the bottom (2) because of convenience (3) it facilitates convection currents (4) to minimise power consumption

Last Answer : it facilitates convection currents

In a refrigerator, by which is cooling is produced?

Description : In a refrigerator, by which is cooling is produced?

Last Answer : – By the evaporation of a volatile liquid

In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : (4) None of these Explanation: Basically, refrigeration system consists of devices that compress and expand refrigerant gas. When refrigerant gas is compressed it expels heat and when it is suddenly ... inside of the fridge is cooled to a temperature below the ambient temperature of the room.

In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Description : In a refrigerator what produces the cooling ? (1) The ice which deposits on the freezer (2) The sudden expansion of a compressed gas (3) The evaporation of a volatile liquid (4) None of these

Last Answer : None of these

In hyperboloid cooling towers the material is filled at 1. Tower’s bottom 2. Tower’s top 3. Near tower 4. None of above

Description : In hyperboloid cooling towers the material is filled at 1. Tower’s bottom 2. Tower’s top 3. Near tower 4. None of above

Last Answer : Tower’s top

The formation of frost on cooling coils in a refrigerator (a) increases heat transfer (b) improves C.O.P. of the system (c) increases power consumption (d) reduces power consumption

Description : The formation of frost on cooling coils in a refrigerator (a) increases heat transfer (b) improves C.O.P. of the system (c) increases power consumption (d) reduces power consumption

Last Answer : Ans: c

It is difficult to cook rice – (1) at the top of a mountain (2) at the sea level (3) under a mine (4) same anywhere

Description : It is difficult to cook rice – (1) at the top of a mountain (2) at the sea level (3) under a mine (4) same anywhere

Last Answer : (1) at the top of a mountain Explanation: On a mountain top the air pressure is a little lower. At higher elevations, water boils at a little lower temp than 100 degrees C. On a ... in mountainous areas is lower because of a decreased air pressure (compared to sea level) at higher altitudes.

It is difficult to cook rice (1) at the top of a mountain (2) at the sea level (3) under a mine (4) same anywhere

Description : It is difficult to cook rice (1) at the top of a mountain (2) at the sea level (3) under a mine (4) same anywhere

Last Answer : at the top of a mountain

I have holes on the top and bottom. I have holes on my left and on my right. And I have holes in the middle, yet I still hold water. What am I? -Riddles

Description : I have holes on the top and bottom. I have holes on my left and on my right. And I have holes in the middle, yet I still hold water. What am I? -Riddles

Last Answer : I'm a Sponge.

Regarding the National Flag choose the correct options from the following statements i) It has a horizontal strip of three colours including deep saffron at the top, white in the middle, and dark green at the bottom. ii) The ratio of the flag width to its length is 2:3 -Science

Description : Regarding the National Flag choose the correct options from the following statements i) It has a horizontal strip of three colours including deep saffron at the top, white in the middle, and dark green at the bottom. ii) The ratio of the flag width to its length is 2:3 -Science

Last Answer : Both i and ii The National Flag of India has a horizontal strip of three colours including deep saffron (Kesaria) at the top, white in the middle, and dark green at the bottom. The ratio of the flag width to its length is 2:3.

The pressure on the top, the pressure on the bottom , the snake in the middle ?

Last Answer : pressure on the top, pressure on the bottom , snake in the middle of the chero- uh — tongue.

A boy on a bicycle is resting at the top of a hill. Then, he rides his bicycle down the hill. Describe how the boy’s potential and kinetic energy differ at the top, middle, and bottom of the hill.?

Description : A boy on a bicycle is resting at the top of a hill. Then, he rides his bicycle down the hill. Describe how the boy’s potential and kinetic energy differ at the top, middle, and bottom of the hill.?

Last Answer : idk

A lake starts freezing because of the cold atmosphere, It will first freeze A. At the bottom B. In the middle part C. At the top surface D. Uniformly throughout the water body

Description : A lake starts freezing because of the cold atmosphere, It will first freeze A. At the bottom B. In the middle part C. At the top surface D. Uniformly throughout the water body

Last Answer : ANSWER: C

A lake starts freezing because of the cold atmosphere. It will first freeze A. At the bottom B. ln the middle pan C. At the top surface (Answer) D. Uniformly throughout the water body

Description : A lake starts freezing because of the cold atmosphere. It will first freeze A. At the bottom B. ln the middle pan C. At the top surface (Answer) D. Uniformly throughout the water body

Last Answer : C. At the top surface (Answer)

Markers in subroutine cannot be accepted as limits whereas this markers stands for: a. Top of stack b. Bottom of stack c. Middle of stack d. Allof these

Description : Markers in subroutine cannot be accepted as limits whereas this markers stands for: a. Top of stack b. Bottom of stack c. Middle of stack d. Allof these

Last Answer : a. Top of stack

The news story is written in the inverted pyramid style. Inverted pyramid style implies- a) Writing the most significant facts at the top b) Writing the most significant facts at the bottom c) Writing the most significant facts at the middle d) None

Description : The news story is written in the inverted pyramid style. Inverted pyramid style implies- a) Writing the most significant facts at the top b) Writing the most significant facts at the bottom c) Writing the most significant facts at the middle d) None

Last Answer : a) Writing the most significant facts at the top

When a rectangular beam is loaded longitudinally, shear develops on (A) Bottom fibre (B) Top fibre (C) Middle fibre (D) Every-horizontal plane

Description : When a rectangular beam is loaded longitudinally, shear develops on (A) Bottom fibre (B) Top fibre (C) Middle fibre (D) Every-horizontal plane

Last Answer : (D) Every-horizontal plane

The reinforcement in a continuous slab is provided (a) At the top of the slab portion over the intermediate supports. (b) At the bottom of the slab portion over the intermediate supports. (c) All the middle of the slab portion over the intermediate supports (d) All the above

Description : The reinforcement in a continuous slab is provided (a) At the top of the slab portion over the intermediate supports. (b) At the bottom of the slab portion over the intermediate supports. (c) All the middle of the slab portion over the intermediate supports (d) All the above

Last Answer : (a) At the top of the slab portion over the intermediate supports.

In shallow type girders, the rail level shall be a) 25mm above the top flange of girder* b) near the bottom of the girder c) near the middle of the girder d) below the girder

Description : In shallow type girders, the rail level shall be a) 25mm above the top flange of girder* b) near the bottom of the girder c) near the middle of the girder d) below the girder

Last Answer : a) 25mm above the top flange of girder*

My refrigerator stops cooling, can you help me diagnose?

Description : My refrigerator stops cooling, can you help me diagnose?

Last Answer : answer:I appreciate your desire to repair your existing unit. However, it being 13 years old you will probably save money in the long run and be happier with performance if you replace it with a ... in many cases the energy savings alone will cover the replacement cost within around 5 years of use.

Condensing temperature in a refrigerator is the temperature (a) of cooling medium (b) of freezing zone (c) of evaporator (d) at which refrigerant gas becomes liquid

Description : Condensing temperature in a refrigerator is the temperature (a) of cooling medium (b) of freezing zone (c) of evaporator (d) at which refrigerant gas becomes liquid

Last Answer : Ans: d

The bank of tubes at the back of domestic refrigerator are (a) condenser tubes (b) evaporator tubes (c) refrigerant cooling tubes (d) capillary tubes

Description : The bank of tubes at the back of domestic refrigerator are (a) condenser tubes (b) evaporator tubes (c) refrigerant cooling tubes (d) capillary tubes

Last Answer : Ans: a

Which chemical is used in a refrigerator for cooling purposes?

Description : Which chemical is used in a refrigerator for cooling purposes?

Last Answer : Freon

Which term is used to describe organisms which live on or in the bottom of an ocean or lake. Such organisms can be found anywhere from the shoreline to the greatest ocean depths? a) biota b) benthos c) nekton d) plankton

Description : Which term is used to describe organisms which live on or in the bottom of an ocean or lake. Such organisms can be found anywhere from the shoreline to the greatest ocean depths? a) biota b) benthos c) nekton d) plankton

Last Answer : ANSWER: B -- BENTHOS

A bottle of sodalime is grasped by the neck and swung briskly in a vertical circle, Near which portion of the bottle do the bubbles collect? (1) Near the bottom (2) In the middle of the bottom (3) Near the neck (4) Bubbles remain distributed uniformly

Description : A bottle of sodalime is grasped by the neck and swung briskly in a vertical circle, Near which portion of the bottle do the bubbles collect? (1) Near the bottom (2) In the middle of the bottom (3) Near the neck (4) Bubbles remain distributed uniformly

Last Answer : (3) Near the neck Explanation: When the bottle of soda water is grasped by the neck and swung briskly in a vertical circle, the bubbles collect at the top of the bottle which is ... beverage forms form bubbles when the dissolved carbon dioxide is depressurized to form emulsions at the top.

A bottle of sodalime is grasped by the neck and swung briskly in a vertical circle, Near which portion of the bottle do the bubbles collect? (1) Near the bottom (2) In the middle of the bottom (3) Near the neck (4) Bubbles remain distributed uniformly

Description : A bottle of sodalime is grasped by the neck and swung briskly in a vertical circle, Near which portion of the bottle do the bubbles collect? (1) Near the bottom (2) In the middle of the bottom (3) Near the neck (4) Bubbles remain distributed uniformly

Last Answer : Near the neck

Does GE or Maytag make a bottom freezer type refrigerator/freezer?

Description : Does GE or Maytag make a bottom freezer type refrigerator/freezer?

Last Answer : Maytag's MFI2266AE 21.8-cubic-foot bottom-freezer refrigerator is a Maytag product.

Is the Amana Easy Reach Plus 18.5 CuFt Bottom-Freezer Refrigerator a energy wise choice?

Description : Is the Amana Easy Reach Plus 18.5 CuFt Bottom-Freezer Refrigerator a energy wise choice?

Last Answer : This refrigerator is not Energy Star qualified.

Is it better to get a refrigerator with 2 crisper doors at the bottom, or just one drawer?

Description : Is it better to get a refrigerator with 2 crisper doors at the bottom, or just one drawer?

Last Answer : It depends on how much fruits and veggies your family usually eats. If you eat a lot then you may want to purchase a fridge with two crisper drawers. If you eat a very small amount you may want to save some space and go with just one drawer.

Why are ice cubes on the bottom tray always so much harder to get out than the top tray?

Description : Why are ice cubes on the bottom tray always so much harder to get out than the top tray?

Last Answer : It’s hotter at the top ? !

Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Description : Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Last Answer : (A) Driving force for the vapour flow is the pressure drop

What are the differences between top, bottom, strange, and charm quarks from the standard 'up' and 'down' quarks?

Description : What are the differences between top, bottom, strange, and charm quarks from the standard 'up' and 'down' quarks?

Last Answer : Standard disclaimer: I'm but a caveman Yes, they have different mass, but also other properties that make them different. It's a deep rabbit hole, but have you checked out Wikipedia ... properties (along with a good general article on quarks) https://en.wikipedia.org/wiki/Quark#Table_of_properties

Does time go faster at the top of a building compared to the bottom? -Physics

Description : Does time go faster at the top of a building compared to the bottom? -Physics

Last Answer : Yes, time goes faster the farther away you are from the earth's surface compared to the time on the surface of the earth. This effect is known as "gravitational time dilation". It is ... difference can be measured on the scale of meters using atomic clocks. Public Domain Image, source: NASA.

A hiker stands at the bottom of steep hill. The hiker may follow a straight line path to the top of the hill, a distance of 300 feet, or she may follow a zig-zag path to the top of the hill and walk a distance of 600 feet. The work done by the force of gravity along the zig-zag path is how many times the work going along the straight path? Is it: w) equal x) twice y) 4 times z) 8 times?

Description : A hiker stands at the bottom of steep hill. The hiker may follow a straight line path to the top of the hill, a distance of 300 feet, or she may follow a zig-zag path to the top of the hill and walk a ... times the work going along the straight path? Is it: w) equal x) twice y) 4 times z) 8 times?

Last Answer : ANSWER: W -- EQUAL 

A block of wood initially at rest slides down an inclined plane. Neglecting friction, the kinetic energy of the block at the bottom of the plane is: w) all converted into heat x) equal to its potential energy (with respect to the bottom of the plane) when it was at the top of the plane y) less than its kinetic energy at the top of the plane z) dependant on the materials of which the block is made

Description : A block of wood initially at rest slides down an inclined plane. Neglecting friction, the kinetic energy of the block at the bottom of the plane is: w) all converted into heat x) equal to its ... kinetic energy at the top of the plane z) dependant on the materials of which the block is made 

Last Answer : ANSWER: X -- EQUAL TO ITS POTENTIAL ENERGY (WITH RESPECT TO THE BOTTOM OF PLANE) WHEN IT WAS AT THE TOP OF THE PLANE.

The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Description : The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Last Answer :  increases with depth of the wall

On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Description : On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Last Answer : Mercury

The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom of the pond becomes cool and rises to the surface due to convection Which of the above statements is/are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Description : The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom ... /are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Last Answer : Ans:(a)

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Description : The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Last Answer : (A) Avoid mechanical weakening of fibre

Dampers are located (A) Before the I.D fan (B) After the I.D. fan (C) Near the top of the chimney (D) Anywhere after the I.D. fan

Description : Dampers are located (A) Before the I.D fan (B) After the I.D. fan (C) Near the top of the chimney (D) Anywhere after the I.D. fan

Last Answer : (A) Before the I.D fan

Why do online library catalog searches always default to "Key Words Anywhere"?

Description : Why do online library catalog searches always default to "Key Words Anywhere"?

Last Answer : Because library websites are often designed by people to whom the idea of computers and the internet is still relatively foreign? People who use phrases like Web 2.0 ? People who are entirely flummoxed by ... anyone under the age of 30 again? Or maybe this is just the libraries I'm familiar with

You will find me with four legs, but no hair. People ride me for hours, but I don't go anywhere. Without needing to be tugged, jerked or turned on, I always manage to be ready for work. What am I? -Riddles

Description : You will find me with four legs, but no hair. People ride me for hours, but I don't go anywhere. Without needing to be tugged, jerked or turned on, I always manage to be ready for work. What am I? -Riddles

Last Answer : A desk.

What is TRUE in regard to oral lesions of reticular lichen planus: A. Never accompanied with skin lesions B. Always accompanied with skin lesions C. Lesions may present anywhere D. Lesions may present on legs E. Lesions may present on arms

Description : What is TRUE in regard to oral lesions of reticular lichen planus: A. Never accompanied with skin lesions B. Always accompanied with skin lesions C. Lesions may present anywhere D. Lesions may present on legs E. Lesions may present on arms

Last Answer : D. Lesions may present on legs E. Lesions may present on arms

What about a flat screen tv on top of the refrigerator? Will electromagnetic rays screw it up?

Description : What about a flat screen tv on top of the refrigerator? Will electromagnetic rays screw it up?

Last Answer : A LCD TV will be fine. You can put a huge speaker next to a CRT TV and it will do the same. The condenser in the fridge is acting like a big magnet. A LCD TV should not be bothered by it.

What is the smallest size of a top-freezer refrigerator I can buy?

Description : What is the smallest size of a top-freezer refrigerator I can buy?

Last Answer : Gorenje makes a small top-freezer refrigerator. The weight is W60 × H165 × D64 cm and weighing 69 kg.

can I keep Bosch 800 Series HMB8060 1.5 CuFt Built-in Microwave Oven - Black, on top of my refrigerator?

Description : can I keep Bosch 800 Series HMB8060 1.5 CuFt Built-in Microwave Oven - Black, on top of my refrigerator?

Last Answer : Bosch-800-Series-HMB8060-15-CuFt-Builtin-Microwave-Oven-Black, does not get hot externally even after long continuous use and does not affect any other equipment , so there should be no problem in keeping it on top of refrigerator.