The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall
by

1 Answer

Answer :

 increases with depth of the wall
by

Related questions

The wall of a dam is broader at the base (1) because streamlining is required (2) to withstand pressure that increases with depth (3) to withstand pressure that increases in a horizontal plane (4) to withstand pressure that is increased with atmospheric pressure

Description : The wall of a dam is broader at the base (1) because streamlining is required (2) to withstand pressure that increases with depth (3) to withstand pressure that increases in a horizontal plane (4) to withstand pressure that is increased with atmospheric pressure

Last Answer : (2) to withstand pressure that increases with depth Explanation: Darns are built broader at the base for two reasons. The first is because it needs to be stable enough to support the dam, and two, ... the structure the lower levels of water are at higher pressure than the upper levels of the water.

The wall of a dam is broader at the base (1) because streamlining is required (2) to withstand pressure that increases with depth (3) to withstand pressure that increases in a horizontal plane (4) to withstand pressure that is increased with atmospheric pressure

Description : The wall of a dam is broader at the base (1) because streamlining is required (2) to withstand pressure that increases with depth (3) to withstand pressure that increases in a horizontal plane (4) to withstand pressure that is increased with atmospheric pressure

Last Answer :  to withstand pressure that increases with depth

In a cantilever retaining wall without a heel slab (A) Thickness of the stem is kept same throughout (B) Base slab is made 10 cm thicker than the stem (C) Width of the base slab is kept 0.7 time the total height of the wall (D) All the above

Description : In a cantilever retaining wall without a heel slab (A) Thickness of the stem is kept same throughout (B) Base slab is made 10 cm thicker than the stem (C) Width of the base slab is kept 0.7 time the total height of the wall (D) All the above

Last Answer : Answer: Option D

The wall of a dam is broader at the base (1) because streamlining is required (2) to withstand pressure that increases with depth (3) to withstand pressure that increases in a horizontal plane (4) to withstand pressure that is increased with atmospheric pressure

Description : The wall of a dam is broader at the base (1) because streamlining is required (2) to withstand pressure that increases with depth (3) to withstand pressure that increases in a horizontal plane (4) to withstand pressure that is increased with atmospheric pressure

Last Answer : (2) to withstand pressure that increases with depth Explanation: Darns are built broader at the base for two reasons. The first is because it needs to be stable enough to support the dam, and two, ... the structure the lower levels of water are at higher pressure than the upper levels of the water.

A rectangle-shaped open-to-sky tank of water has a length of 2 m and a width of 1 m. If the atmospheric pressure is assumed to be 100 kPa and thickness of the tank walls is assumed to be negligible, the force exerted by the atmosphere on the surface of water is A. 20 kN B. 50 kN C. 100 kN D. 200 kN

Description : A rectangle-shaped open-to-sky tank of water has a length of 2 m and a width of 1 m. If the atmospheric pressure is assumed to be 100 kPa and thickness of the tank walls is assumed to be negligible, the force exerted by ... of water is A. 20 kN B. 50 kN C. 100 kN D. 200 kN

Last Answer : 200 kN

The cell wall of A.gram-positive bacteria are thicker than gram-negative bacteria B.gram-negative bacteria are thicker than gram-positive bacteria C.both have same thickness but composition is different D.none of these

Description : The cell wall of A.gram-positive bacteria are thicker than gram-negative bacteria B.gram-negative bacteria are thicker than gram-positive bacteria C.both have same thickness but composition is different D.none of these

Last Answer : A.gram-positive bacteria are thicker than gram-negative bacteria

The cell wall of A- gram-positive bacteria are thicker than gram-negative bacteria B- gram-negative bacteria are thicker than gram-positive bacteria C- both have same thickness but composition is different D- none of these

Description : The cell wall of A- gram-positive bacteria are thicker than gram-negative bacteria B- gram-negative bacteria are thicker than gram-positive bacteria C- both have same thickness but composition is different D- none of these

Last Answer : gram-positive bacteria are thicker than gram-negative bacteria

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

The film thickness for laminar film condensation on vertical surface __________ from top to bottom. (A) Cumulatively increases (B) Cumulatively decreases (C) Remain constant (D) And the surface conductance increase

Description : The film thickness for laminar film condensation on vertical surface __________ from top to bottom. (A) Cumulatively increases (B) Cumulatively decreases (C) Remain constant (D) And the surface conductance increase

Last Answer : (A) Cumulatively increases

It is observed that the total pressure exerted by air on the man of average size is around 14.7 lb wt. per square inch. But the man feels quite comfortable,. It is because of-----? A. An equal and opposite pressure acts from inside (Answer) B. of the height of a man C. of gravity D. Earth pulls the man upward E. None of these

Description : It is observed that the total pressure exerted by air on the man of average size is around 14.7 lb wt. per square inch. But the man feels quite comfortable,. It is because of-----? A. An equal and ... B. of the height of a man C. of gravity D. Earth pulls the man upward E. None of these

Last Answer : A. An equal and opposite pressure acts from inside (Answer)

The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2(B) wH (C) wH2 /2 (D) wH2 /4

Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4

Last Answer : Answer: Option C

How do you calculate the pressure exerted by the water on the bottom of a 2.75m deep swimming pool.(Gravitational field strength=9.8N/kg?

Description : How do you calculate the pressure exerted by the water on the bottom of a 2.75m deep swimming pool.(Gravitational field strength=9.8N/kg?

Last Answer : 1,000×2.75×9.8=26,950

In a T-beam, the vertical distance between the bottom of the flange and the centre of the tensile reinforcement is (a) Breadth of flange (b) Thickness of flange (c) Breadth of slab (d) Depth of rib

Description : In a T-beam, the vertical distance between the bottom of the flange and the centre of the tensile reinforcement is (a) Breadth of flange (b) Thickness of flange (c) Breadth of slab (d) Depth of rib

Last Answer : (d) Depth of rib

For a body floating in a liquid the normal pressure exerted by the liquid acts at A) Bottom surface of the body (B) C.G. of the body (C) Metacentre (D) All points on the surface of the body

Description : For a body floating in a liquid the normal pressure exerted by the liquid acts at A) Bottom surface of the body (B) C.G. of the body (C) Metacentre (D) All points on the surface of the body

Last Answer : Answer: Option D

The partial pressure of each constituent present in an alloy is __________ the total vapor pressure exerted by the alloy. (A) Less than (B) Equal to (C) More than (D) Either (B) or (C); depends on the type of alloy

Description : The partial pressure of each constituent present in an alloy is __________ the total vapor pressure exerted by the alloy. (A) Less than (B) Equal to (C) More than (D) Either (B) or (C); depends on the type of alloy

Last Answer : (A) Less than

. If Prandtl number is greater than the Schmidt number, then the (A) Thermal boundary layer lies inside the concentration boundary layer (B) Concentration boundary layer lies inside the thermal boundary layer (C) Thermal & concentration boundary layers are of equal thickness (D) Hydrodynamic (i.e., momentum) boundary layer is thicker than the other two

Description : . If Prandtl number is greater than the Schmidt number, then the (A) Thermal boundary layer lies inside the concentration boundary layer (B) Concentration boundary layer lies inside the thermal boundary ... (D) Hydrodynamic (i.e., momentum) boundary layer is thicker than the other two

Last Answer : (A) Thermal boundary layer lies inside the concentration boundary layer

Why supporting wall of a dam is built very broad at the bottom?

Description : Why supporting wall of a dam is built very broad at the bottom?

Last Answer : The supporting wall of a dam is built very broad at the bottom because at bottom the water pressure is very large as compared to the surface of water.

The wall of the left ventricle is much thicker than that of right ventricle because (a) it accommodates more blood (b) it receives oxygenated blood with tremendous force from various parts of the body (c) it pumps oxygenated blood with tremendous force to various parts of the body (d) it is engineered to carry blood with a high quantum of oxygen and nutrients Questions

Description : The wall of the left ventricle is much thicker than that of right ventricle because (a) it accommodates more blood (b) it receives oxygenated blood with tremendous force from various parts of the ... body (d) it is engineered to carry blood with a high quantum of oxygen and nutrients Questions

Last Answer : Ans:(c)

The vapour pressure exerted by the moisture contained in a wet solid depends upon the (A) Nature of the moisture (B) Temperature (C) Nature of the solid (D) All (A), (B) and (C)

Description : The vapour pressure exerted by the moisture contained in a wet solid depends upon the (A) Nature of the moisture (B) Temperature (C) Nature of the solid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pressure exerted by a liquid depends upon its (A) Surface tension (B) Density (C) Viscosity

Description : Pressure exerted by a liquid depends upon its (A) Surface tension (B) Density (C) Viscosity

Last Answer : Option B

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity. Static fluid pressure does not depend on the shape, total mass, or surface area of the liquid.

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity.

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : Surface area of the bottom of the vessel

Normal force exerted per unit area by gas on walls of container is A. temperature B. energy C. pressure D. friction

Description : Normal force exerted per unit area by gas on walls of container is A. temperature B. energy C. pressure D. friction

Last Answer : pressure

In a dam a hole is formed through which water flows. why will it be more difficult to plug the leak if the hole is located at the bottom of the dam than if it is at the top?

Description : In a dam a hole is formed through which water flows. why will it be more difficult to plug the leak if the hole is located at the bottom of the dam than if it is at the top?

Last Answer : Because the pressure of the water is a lot stronger at thebottom of the water and a lot less strong closer to the surface ofthe water

To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than (A) b/3 (B) b/4 (C) b/5 (D) b/6

Description : To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than (A) b/3 (B) b/4 (C) b/5 (D) b/6

Last Answer : Answer: Option D

The effective span of a simply supported slab, is (A) Distance between the centres of the bearings (B) Clear distance between the inner faces of the walls plus twice the thickness of the wall (C) Clear span plus effective depth of the slab (D) None of these

Description : The effective span of a simply supported slab, is (A) Distance between the centres of the bearings (B) Clear distance between the inner faces of the walls plus twice the thickness of the wall (C) Clear span plus effective depth of the slab (D) None of these

Last Answer : Answer: Option B

The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Description : The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Last Answer : Answer: Option D

The pressure exerted by wall of the cell on the protoplast is

Description : The pressure exerted by wall of the cell on the protoplast is

Last Answer : The pressure exerted by wall of the cell on the protoplast is A. W.P. B. T.P. C. D. P. D. O.P.

__________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge(C) Pitot tube(D) Orificemeter

Description : __________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge (C) Pitot tube (D) Orificemeter

Last Answer : (C) Pitot tube

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

Oncotic pressure refers to a) the osmotic pressure exerted by proteins. Oncotic pressure is a pulling pressure exerted by proteins, such as albumin. b) the number of dissolved particles contained in a unit of fluid. Osmolality refers to the number of dissolved particles contained in a unit of fluid. c) the excretion of substances such as glucose through increased urine output. Osmotic diuresis occurs when the urine output increases due to excretion of substances such as glucose. d) the amount of pressure needed to stop flow of water by osmosis. Osmotic pressure is the amount of pressure needed to stop the flow of water by osmosis.

Description : Oncotic pressure refers to a) the osmotic pressure exerted by proteins. Oncotic pressure is a pulling pressure exerted by proteins, such as albumin. b) the number of dissolved particles contained in a ... . Osmotic pressure is the amount of pressure needed to stop the flow of water by osmosis.

Last Answer : a) the osmotic pressure exerted by proteins. Oncotic pressure is a pulling pressure exerted by proteins, such as albumin.

weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Description : weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Last Answer : ANS: A

Depth of lean concrete bed placed at the bottom of a wall footing, is kept (A) 10 cm (B) 15 cm (C) Equal to its projection beyond wall base (D) Less than its projection beyond wall base

Description : Depth of lean concrete bed placed at the bottom of a wall footing, is kept (A) 10 cm (B) 15 cm (C) Equal to its projection beyond wall base (D) Less than its projection beyond wall base

Last Answer : Answer: Option C

A reinforced concrete cantilever porch has thickness t. The main reinforcing steel will be placed (a) At mid-thickness (b) At t/3 from the top (c) Close to the bottom surface (d) Close to the top surface

Description : A reinforced concrete cantilever porch has thickness t. The main reinforcing steel will be placed (a) At mid-thickness (b) At t/3 from the top (c) Close to the bottom surface (d) Close to the top surface

Last Answer : (d) Close to the top surface

If a beam fails in bond, then its bond strength can be increased most economically by (A) Increasing the depth of beam (B) Using thinner bars but more in number (C) Using thicker bars but less in number (D) Providing vertical stirrups

Description : If a beam fails in bond, then its bond strength can be increased most economically by (A) Increasing the depth of beam (B) Using thinner bars but more in number (C) Using thicker bars but less in number (D) Providing vertical stirrups

Last Answer : Answer: Option B

Pressure in fluid depends upon A. depth below the surface B. density of fluid C. the value of gD. all of above

Description :  Pressure in fluid depends upon A. depth below the surface B. density of fluid C. the value of g D. all of above

Last Answer : all of above

What is the area of a trapezium when the top is 7.4 cm the bottom is 8.6 cm and the height is 5.6 cm?

Description : What is the area of a trapezium when the top is 7.4 cm the bottom is 8.6 cm and the height is 5.6 cm?

Last Answer : *This refers to a trapezoid (US) or trapezium(UK)*A = h x [(b1+b2) /2 ]The area is 44.8 square centimeters (average width x height)Finding the average width : (7.4 + 8.6) / 2 = 8Multiply width by height : 8 x 5.6 = 44.8

The strength of wave action depends on all these EXCEPT: A. Currents in the sea (Answer) B. Wind strength C. Depth of coastal water D. Height of waves

Description : The strength of wave action depends on all these EXCEPT: A. Currents in the sea (Answer) B. Wind strength C. Depth of coastal water D. Height of waves

Last Answer : A. Currents in the sea (Answer)

A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

Description : A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

Last Answer : A concrete dam 15 m deep and 2 m wide containing water to a depth of 10 m .Find total hydrostatic pressure per meter run and centre of pressure on upstream face.

It has been suggested that enterocyte-specific fuels be utilized for all patients receiving parenteral nutrition. Theoretically, the benefits of such fuels include: A. Glutamine increases gut mucosal protein content and wall thickness. B. Butyrate increases jejunal mucosal protein content and wall thickness. C. The short-chain fatty acids—butyrate, propionate, and acetate—are useful in supporting ileal mucosal protein content and thickness. D. The use of glutamine-enriched solutions for parenteral nutrition for patients with chemotherapy toxicity or radiation enteritis is without hazards.

Description : It has been suggested that enterocyte-specific fuels be utilized for all patients receiving parenteral nutrition. Theoretically, the benefits of such fuels include: A. Glutamine increases ... parenteral nutrition for patients with chemotherapy toxicity or radiation enteritis is without hazards.

Last Answer : Answer: NONE IS ENTIRELY TRUE DISCUSSION: The use of enterocyte-specific fuels is part of a new and potentially exciting phase of nutritional pharmacology in parenteral nutrition; ... the maintenance of colonocyte-specific nutrition and, in the case of butyrate, ileal enterocyte nutrition

With increase in the schedule number of a pipe of a particular nominal size, the (A) Wall thickness also increases (B) I.D. of the pipe decreases (C) O.D. of the pipe remains constant (D) All (A), (B) and (C)

Description : With increase in the schedule number of a pipe of a particular nominal size, the (A) Wall thickness also increases (B) I.D. of the pipe decreases (C) O.D. of the pipe remains constant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

When the greatest pressure exerted on the ground by a man?

Description : When the greatest pressure exerted on the ground by a man?

Last Answer : – When he stands on the toes of one foot

Which of the following is true about cell wall of gram-positive bacteria? A- It consists of multiple layers B- It is thicker than that associated with gram-negative bacteria C- It contains teichoic acids D- D.All of these

Description : Which of the following is true about cell wall of gram-positive bacteria? A- It consists of multiple layers B- It is thicker than that associated with gram-negative bacteria C- It contains teichoic acids D- D.All of these

Last Answer : D.All of these

Which of the following is true about cell wall of gram-positive bacteria? A-It consists of multiple layers B- It is thicker than that associated with gram-negative bacteria C- It contains teichoic acids D- All of these

Description : Which of the following is true about cell wall of gram-positive bacteria? A-It consists of multiple layers B- It is thicker than that associated with gram-negative bacteria C- It contains teichoic acids D- All of these

Last Answer : All of these

Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Description : Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Last Answer : (A) Driving force for the vapour flow is the pressure drop

A hydrogen filled balloon rises in air because (a) The atmospheric pressure decreases with altitude (b) The acceleration due to gravity decreases with altitude (c) The density of air decreases with altitude (d) The buoyant force exerted by the air on the balloon is greater than the weight of the balloon

Description : A hydrogen filled balloon rises in air because (a) The atmospheric pressure decreases with altitude (b) The acceleration due to gravity decreases with altitude (c) The density of air decreases with ... The buoyant force exerted by the air on the balloon is greater than the weight of the balloon

Last Answer : Ans:(d)

If water in a lake were to behave like other liquids, then in extremely cold weather it would freeze (a) from top to bottom (b) from bottom to top (c) simultaneously throughout the depth (d) first on the surface, bottom and sides and then in the interior

Description : If water in a lake were to behave like other liquids, then in extremely cold weather it would freeze (a) from top to bottom (b) from bottom to top (c) simultaneously throughout the depth (d) first on the surface, bottom and sides and then in the interior

Last Answer : Ans:(b)