A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

A catalyst loses its activity due to
(A) Loss in surface area of the active component
(B) Agglomeration of metal particles caused by thermal sintering of the solid
surface
(C) Covering of the catalytic active sites by a foreign substance
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)

Description : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)

Last Answer : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total ... B. `80` C. `20` D. `22`

The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration

Description : The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration

Last Answer : (C) Sintering

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Catalyst carriers (A) Have very high selectivity (B) Increase the activity of a catalyst (C) Provide large surface area with a small amount of active material (D) Inhibit catalyst poisoning

Description : Catalyst carriers (A) Have very high selectivity (B) Increase the activity of a catalyst (C) Provide large surface area with a small amount of active material (D) Inhibit catalyst poisoning

Last Answer : (C) Provide large surface area with a small amount of active material

A substance unrelated to substrate but capable of reversibly changing activity of enzyme by binding to a site other than active site is called (a) Competitive inhibitor (b) Non-competitive inhibitor (c) Catalytic inhibitor (d) Allosteric modulator/inhibitor

Description : A substance unrelated to substrate but capable of reversibly changing activity of enzyme by binding to a site other than active site is called (a) Competitive inhibitor (b) Non-competitive inhibitor (c) Catalytic inhibitor (d) Allosteric modulator/inhibitor

Last Answer : Ans. ((d))

What is the process that tends to build up the land surface by deposition of solid material in its lower areas, known as? a. Abrasion b. Agglomeration c. Aggradation d. Attrition

Description : What is the process that tends to build up the land surface by deposition of solid material in its lower areas, known as? a. Abrasion b. Agglomeration c. Aggradation d. Attrition

Last Answer : c. Aggradation

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil is the material in a relatively thin surface zone within which roots occur, and rest of the crust is termed as rock irrespective of hardness (C) To an engineer, soil is the unaggregated and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Description : Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil ... and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Last Answer : (D) All the above

Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced due to density difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Description : Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced ... difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Last Answer : (D) None of these

Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil(B) Sintering of porous catalyst(C) Hydrogen embrittlement(D) All (A), (B) and (C)

Description : Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil (B) Sintering of porous catalyst (C) Hydrogen embrittlement (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Description : Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Last Answer : b.Solid Object Ultraviolet-Laser Printer (SOUP)

Agglomeration of individual particles into clusters (flocs) is called flocculation. To prevent flocculation, the most commonly used dispersing agents are (A) Carbonates (B) Sulphates (C) Silicates & phosphates (D) Bi-carbonates

Description : Agglomeration of individual particles into clusters (flocs) is called flocculation. To prevent flocculation, the most commonly used dispersing agents are (A) Carbonates (B) Sulphates (C) Silicates & phosphates (D) Bi-carbonates

Last Answer : (C) Silicates & phosphates

The temperature at which the catalytic activity of the catalyst is maximum, is called (1) room temperature (2) critical temperature (3) absolute temperature (4) optimum temperature

Description : The temperature at which the catalytic activity of the catalyst is maximum, is called (1) room temperature (2) critical temperature (3) absolute temperature (4) optimum temperature

Last Answer : d) optimum temperature

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Description : The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Last Answer : (C) Remain unaffected

If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Description : If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Last Answer : (B) Porosity is of less importance

. B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Description : . B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Last Answer : (C) Surface area

Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Description : Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Last Answer : d.Stereolithography

Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Last Answer : c.Laminated-Object Manufacturing

Consider the following statements. (A) Coenzyme or metal ion that is tightly bound to enzyme protein is called prosthetic group. (B) A complete catalytic active enzyme with its bound prosthetic group is called apoenzyme. Select the correct option. (a) (A) is false but (B) is true. (b) Both (A) and (B) are true. (c) (A) is true but (B) is false. (d) Both (A) and (B) are false

Description : Consider the following statements. (A) Coenzyme or metal ion that is tightly bound to enzyme protein is called prosthetic group. (B) A complete catalytic active enzyme with its bound prosthetic group is called apoenzyme. Select the ... ) (A) is true but (B) is false. (d) Both (A) and (B) are false

Last Answer : (d) Both (A) and (B) are false.

Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these

Description : Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these

Last Answer : (D) None of these

Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction?(A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Description : Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction? (A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Last Answer : (A) Ash resistance

Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay(D) All (A), (B) & (C)

Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Last Answer : (A) Phosphoric acid on kieselguhr

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Catalyst used in catalytic polymerisation which produces polymergasoline is(A) H2SO4(B) H3PO4(C) Both (A) and (B)(D) AlCl3

Description : Catalyst used in catalytic polymerisation which produces polymergasoline is (A) H2SO4 (B) H3PO4 (C) Both (A) and (B) (D) AlCl3

Last Answer : (C) Both (A) and (B)

Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Catalytic (B) Autocatalytic (C) Photochemical

Description : A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Catalytic (B) Autocatalytic (C) Photochemical

Last Answer : (C) Photochemical

Catalytic action in a catalytic chemical reaction follows from the ability of catalyst to change the (A) Activation energy (B) Equilibrium constant (C) Heat of reaction (D) None of these

Description : Catalytic action in a catalytic chemical reaction follows from the ability of catalyst to change the (A) Activation energy (B) Equilibrium constant (C) Heat of reaction (D) None of these

Last Answer : (A) Activation energy

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of the reacting molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Description : Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of ... molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Last Answer : (C) A catalyst lowers the activation energy of the reacting molecules

The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic

Description : The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic

Last Answer : (D) Autocatalytic

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

The catalytic activity of enzymes is due to their capacity to lower the __________ energy. (A) Activation (B) Potential (C) Kinetic (D) None of these

Description : The catalytic activity of enzymes is due to their capacity to lower the __________ energy. (A) Activation (B) Potential (C) Kinetic (D) None of these

Last Answer : (A) Activation

The importance of diffusion in a catalyst are increased by (A) Large catalyst particle size (B) An active surface of the catalyst (C) Small pore diameter (D) All (A), (B) and (C)

Description : The importance of diffusion in a catalyst are increased by (A) Large catalyst particle size (B) An active surface of the catalyst (C) Small pore diameter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Promoter (A) Initiates a chemical reaction and is a catalyst by itself (B) Alters the position of equilibrium in a reversible reaction (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals(D) All (A), (B) and (C)

Description : Promoter (A) Initiates a chemical reaction and is a catalyst by itself (B) Alters the position of equilibrium in a reversible reaction (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals (D) All (A), (B) and (C)

Last Answer : (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals

Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Description : Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Last Answer : b.Thermoplastics, Metal powders

In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site (C) All the adsorption does not take place by the same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface

Description : In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of ... same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface

Last Answer : (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site

Which of the following compounds loses optical activity due to pyramidal inversion?

Description : Which of the following compounds loses optical activity due to pyramidal inversion?

Last Answer : Which of the following compounds loses optical activity due to pyramidal inversion? A. B. C. D.

Moderating material used in a thermal-reactor should be a (A) Good absorber of neutrons (B) Solid substance (C) Poor absorber of neutrons (D) None of these

Description : Moderating material used in a thermal-reactor should be a (A) Good absorber of neutrons (B) Solid substance (C) Poor absorber of neutrons (D) None of these

Last Answer : (C) Poor absorber of neutrons

With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Description : With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Last Answer : (B) Decreases

2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Description : 2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Last Answer : 2-Butene

Which of the following is not categorised as the ore agglomeration process? (A) Nodulising (B) Pelletising (C) Balling (D) Briquetting

Description : Which of the following is not categorised as the ore agglomeration process? (A) Nodulising (B) Pelletising (C) Balling (D) Briquetting

Last Answer : Option C