Description : The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density
Last Answer : ANSWER: X -- HEAT OF VAPORIZATION
Description : Which of the following molecules would have the smallest molar enthalpy of vaporization? w) Water x) Formaldehyde y) Methane z) Ammonia
Last Answer : ANSWER: Y -- METHANE
Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree? A. Latent heat of fusion B. Molar heat C. Specific heat capacity D. Specific heat
Last Answer : Specific heat
Description : Which one of the following statements is TRUE regarding the molar heat capacity for the noble gases? w) heat capacity decreases from Helium to Xenon x) heat capacity increases from helium to argon y) heat ... Helium to Argon, then decreases to Xenon z) heat capacity is the same for all noble gases
Last Answer : ANSWER: Z -- HEAT CAPACITY IS THE SAME FOR ALL NOBLE GASES
Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion
Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.
Description : The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion
Last Answer : (2) It reflects most of the heat from the sum Explanation: Newly formed snow reflects about 90 per cent of the sunlight that falls upon it. This means that the sun is powerless to melt clean snow. And when ... on a spring day because of the sun's heat. It melts because of the warm air from the sea.
Description : What is a calorie? w) amount of heat required to raise one gram of water one degree Celsius. x) amount of work required to move one gram of water by one centimeter. y) amount of heat required to melt ice. z) amount of heat required to raise one gram of water one degree Fahrenheit
Last Answer : ANSWER: W -- AMOUNT OF HEAT REQUIRED TO RAISE ONE GRAM OF WATER ONE DEGREE CELSIUS
Description : What refers to the amount of energy absorbed or released during a phase-change process? A. Molar heat B. Latent heat C. Vaporization heat D. Condensation heat
Last Answer : Latent heat
Description : The process of a solid converting directly into a gas is called: w) fusion x) sublimation y) condensation z) distillation
Last Answer : ANSWER: X -- SUBLIMATION
Description : The snow on the mountains does not melt all at once when it is heated by the sun because _____ A. It becomes very hard It B. It reflects most of the heat from the sun C. It has a low specific heat capacity D. It has a high latent heat of fusion
Last Answer : ANSWER: B
Description : The snow on the mountains does NOT melt all at once when it is heated by the sun because: (1) it becomes very hard (2) it reflects most of the heat from the sun (3) it has a low specific heat capacity (4) it has a high latent heat of fusion
Last Answer : it reflects most of the heat from the sun
Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature. a. Latent Heat of Sublimation b. Latent Heat of Vaporization c. Latent Heat of Fusion d. Latent Heat Of Condensation
Last Answer : Latent Heat of Vaporization
Description : What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state? A. Heat of fusion B. Heat of vaporation C. Heat of condensation D. Heat of fission
Last Answer : Heat of fusion
Description : A cobalt chloride solution soaked into a piece of cotton can be used as an indicator for changes in humidity levels. Pink indicates a high-humidity environment and blue a low-humidity environment. What ... the cobalt's waters of hydration. z) This is an illustration of the Schrodinger principle.
Last Answer : ANSWER: Y -- THE LOSS AND READSORPTION OF THE COBALT'S WATERS OF HYDRATION.
Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree. A. Latent heat of fusion B. Molar heat C. Specific heat capacity D. Specific heat
Last Answer : Specific heat capacity
Description : Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100
Last Answer : (B) ∞
Description : What is the heat capacity of one mole of substance? A. Molecular heat B. Specific heat C. Latent heat D. Molar heat
Last Answer : Molar heat
Description : How is the h fusion used to calculate the mass of a solid that 1 kj of energy will melt?
Last Answer : What is the answer ?
Description : As one goes across a period in the periodic table, the ionization energy generally increases for one of the following reasons. Is it because of the increasing w) atomic radius x) melting point y) nuclear charge z) density
Last Answer : ANSWER: Y -- NUCLEAR CHARGE
Description : The change of a gas to a liquid is called: w) vaporization x) sublimation y) condensation z) freezing
Last Answer : ANSWER: Y -- CONDENSATION
Description : If the first ionization energy of magnesium is 176 kilocalories per mole, one would expect the second ionization energy t be approximately: w) 350 kilocalories per mole x) 1,760 kilocalories per mole y) 200 kilocalories per mole z) 20 kilocalories per mole
Last Answer : ANSWER: W -- 350 KILOCALORIES PER MOLE
Description : Which of the following energy technologies is not utilized for power generation today? w) Nuclear Fission x) Solar Ponds y) Geothermal Power z) Nuclear Fusion
Last Answer : ANSWER: Z -- NUCLEAR FUSION
Description : For a substance, density, solubility and melting point are examples of: w) physical properties x) amorphous properties y) chemical properties z) potential properties
Last Answer : ANSWER: W -- PHYSICAL PROPERTIES
Description : Diamond has each of the following properties except: w) extreme hardness x) ability to conduct electricity y) high melting point z) tendency to burn in air
Last Answer : ANSWER: X -- ABILITY TO CONDUCT ELECTRICITY
Description : The metallic element with the highest melting point is: w) Ta x) W y) Rh z) Mo
Last Answer : ANSWER: X -- W
Description : Which of the following substances would be expecte to have the highest melting point? w) Potassium Bromide x) Iodine y) Methane z) Hydrogen Chloride
Last Answer : ANSWER: W -- POTASSIUM BROMIDE
Description : Solids may be considered to be either crystalline noncrystalline. The basic difference between them is that a crystal, in contrast to a noncrystal: w) has a sharp melting point x) has an irregular array of atoms y) exhibits double refraction z) has a completely regular atomic or molecular structure
Last Answer : ANSWER: Z -- HAS A COMPLETELY REGULAR ATOMIC OR MOLECULAR STRUCTURE
Description : Which noble gas has the highest melting point ? w) argon x) krypton y) xenon z) radon
Last Answer : ANSWER: Z -- RADON
Description : Reaction between X and Y forms compound Z. X loses electron and Y gains electron. Which of the following properties is not shown by Z? A) Has high melting point B) Has low melting point C) Conducts electricity in molten state D) Occurs as solid
Last Answer : B) Has low melting point
Description : Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?
Last Answer : Vapor phase oxidation.
Description : The difference in the osmotic pressures of one molar solutions of different compounds in a given solvent at a given temperature results from? w) Different values for R x) Different values for Avogadro's number y) Ionization or dissociation z) None of the above
Last Answer : ANSWER: Y -- IONIZATION OR DISSOCIATION
Description : The compound which would have the greatest molar effect on the colligative properties of a dilute solution would be: w) CaCl2 x) NaCl y) C6H12O6 z) Benzene
Last Answer : ANSWER: W -- CaCl2
Description : Calcium carbonate is most soluble in: w) 0.2 Molar Sodium carbonate x) 0.1 Molar Calcium chloride y) 0.1 Molar Sodium hydroxide z) 0.1 Molar Hydrochloric acid
Last Answer : ANSWER: Z -- 0.1 MOLAR HYDROCHLORIC ACID
Description : A sample of grapefruit juice at 25 degrees Celsius has a hydronium concentration of 1.78 X 10-3 molar. What is the pH of the solution? w) 2.22 x) 2.75 y) 3.25 z) 6.33
Last Answer : ANSWER: X -- 2.75
Description : The molar volume of which two elements is the same at standard temperature and pressure? w) fluorine and bromine x) fluorine and iodine y) fluorine and chlorine z) bromine and iodine
Last Answer : ANSWER: Y -- FLUORINE AND CHLORINE
Description : What is the pH of an aqueous solution of 0.1 molar HCl? w) 7 x) 13 y) 1 z) 3
Last Answer : ANSWER: Y -- 1
Description : 2.5 liters of a sodium chloride (NaCl) solution contain 5 moles of the solute. What is the molarity? w) 5 molar x) 2 molar y) 2.5 molar z) 12.5 molar
Last Answer : ANSWER: X -- 2 MOLAR
Description : Pure water is approximately what molar concentration: w) .55 Molar x) 5.5 Molar y) 55 Molar z) 550 Molar
Last Answer : ANSWER: Y -- 55 MOLAR
Description : Which of the following terms refer to the amount of heat needed to raise the temperature of a unit mass of a substance through one degree? w) Heat of fusion x) Liquification heat y) Internal heat z) Specific heat
Last Answer : ANSWER: Z -- SPECIFIC HEAT
Description : When the front of a glacier is stationary for a long time, the glacier will do which of the following? w) form many crevasses x) melt away y) not erode its bed z) build a large terminal moraine
Last Answer : ANSWER: Z -- BUILD A LARGE TERMINAL MORAINE
Description : One mole of electrons is known as: w) a Faraday x) a Henry y) a Coulomb z) an Ampere
Last Answer : ANSWER: W -- A FARADAY
Description : Moles of solute divided by kilograms of solvent is expression for: w) molarity x) solute-to-solution ratio y) mole percentage z) molality
Last Answer : ANSWER: Z -- MOLALITY
Description : The complete combustion of one mole of hydrogen produces: w) 1/2 mole H2O x) 1/2 mole H2O + 1/2 mole O3 y) 1 mole water z) 1 mole hydroxide ions
Last Answer : ANSWER: Y -- 1 MOLE WATER
Description : One equivalent of a triprotic acid is the same as: w) one mole of the acid x) one-third mole of the acid y) three moles of the acid z) three equivalents of a diprotic acid
Last Answer : ANSWER: X -- ONE-THIRD MOLE OF THE ACID
Description : What process produces most of the energy that is radiated by the Sun? w) gravitational contraction x) chemical combustion y) nuclear fusion z) nuclear fission
Last Answer : ANSWER: Y -- NUCLEAR FUSION
Description : What is the difference between water's high heat capacity and high heat of vaporization?
Last Answer : Water heat of vaporization at 100 oC: 2030 kJ/kg.Water specific heat at 15 oC: 4,187 kJ/kg.K.
Description : A definite amount of an ideal gas `(gamma = 1.5)` undergoes change of state in which heat exchange is equal to work done `(q=w)`. Molar heat capacity
Last Answer : A definite amount of an ideal gas `(gamma = 1.5)` undergoes change of state in which heat exchange is equal to work ... : A. 2R B. 3R C. R D. `3/2R`
Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity
Last Answer : ANSWER: Y -- HIGH MELTING POINT
Description : Ice skating is possible and practical because of a unique property of water. Is it because: w) The coefficient of kinetic friction of steel on frozen water decreases with decreasing temperature x ... sublimes y) The melting point decreases with increasing pressure z) Ice is a good thermal insulator
Last Answer : ANSWER: Y -- THE MELTING POINT DECREASES WITH INCREASING PRESSURE