Are there any VCRs that have HDMI outputs?

Are there any VCRs that have HDMI outputs?
by

1 Answer

Answer :

The only one available is actually a Sony upscaling DVD/VCR combo.In real world terms an hdmi cable doesn't benefit you with a vcr as the signal is still going to be standard definition.
by

Related questions

What VCRs can record off of DVDs?

Description : What VCRs can record off of DVDs?

Last Answer : Any of the Sony dual VCR/DVD players can record from DVD.

Do they still make vcrs that have dvd and video combined?

Description : Do they still make vcrs that have dvd and video combined?

Last Answer : I am not sure who you are referring to when you ask if "they" still making VCR's with DVD and video combined, such as the brand. However, I do know that many stores are selling them. Bestbuy, Amazon.com, Overstock.com, and eBay.com are the major retailers that sell these products.

Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259

Description : Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259

Last Answer : B. F-type connector

What is a good vid card with 3 DVI outputs?

Description : What is a good vid card with 3 DVI outputs?

Last Answer : I have the Nvidea Quadro NVS 420 here at work. I have 3 monitors, but it supports 4. Haven’t had any problems with it.

How can I write a C++ program that outputs different colored characters?

Description : How can I write a C++ program that outputs different colored characters?

Last Answer : Usually you use ANSI codes for colors. This will assume that the console is an ANSI terminal or ANSI terminal emulator. ANSI codes usually look like escape sequences. e.g. [32m (set to green). If you ... 's getting away from your question. I may be wrong, but I believe the cmd window supports ANSI.

Python: how to write outputs from GridSearchCV() to a file -Web-Development

Description : Python: how to write outputs from GridSearchCV() to a file -Web-Development

Last Answer : answer:

How many inputs and how many outputs of NOT gate ?

Description : How many inputs and how many outputs of NOT gate ?

Last Answer : NOT Gate has one input and one output.

What set of all values that a function will return as outputs is called the of the function?

Description : What set of all values that a function will return as outputs is called the of the function?

Last Answer : Need answer

What are the inputs and outputs of a toaster?

Description : What are the inputs and outputs of a toaster?

Last Answer : Need answer

What is a mapping between a set of inputs and a set of outputs?

Description : What is a mapping between a set of inputs and a set of outputs?

Last Answer : It is simply a mapping. It could be a function but there areseveral conditions that need to be met before the mapping canbecome a function and there is no basis for assuming that thoseconditions are met.

Why are so many newer TVs without analog audio outputs or headphone jacks?

Description : Why are so many newer TVs without analog audio outputs or headphone jacks?

Last Answer : For the same reason that new TVs no longer use analog videosignals. Everything is switching to digital.

What are types of outputs?

Description : What are types of outputs?

Last Answer : pigs

What are 3 types of outputs?

Description : What are 3 types of outputs?

Last Answer : Feel Free to Answer

What should be the outputs of the hot neutral and ground wires respectively when tested with a multimeter?

Description : What should be the outputs of the hot neutral and ground wires respectively when tested with a multimeter?

Last Answer : Feel Free to Answer

What are types of outputs?

Description : What are types of outputs?

Last Answer : pigs

Transformation of physical inputs into physical outputs is termed as

Description : Transformation of physical inputs into physical outputs is termed as

Last Answer : Ans. Production

Gross National Product means - (1) gross value of finished goods (2) money values of the total national production for any given period (3) gross value of raw materials and semifinished products (4) money value of inputs and outputs

Description : Gross National Product means - (1) gross value of finished goods (2) money values of the total national production for any given period (3) gross value of raw materials and semifinished products (4) money value of inputs and outputs

Last Answer : (2) money values of the total national production for any given period Explanation: Gross national product (GNP) is the market/monetary value of all products and services produced in one year by labour and property supplied by the residents of a country.

Production Function relates to: (1) costs to outputs (2) costs to inputs (3) inputs to outputs (4) wage level to profits

Description : Production Function relates to: (1) costs to outputs (2) costs to inputs (3) inputs to outputs (4) wage level to profits

Last Answer : (3) inputs to outputs Explanation: In microeconomics and macroeconomics, a production function is a function that specifies the out-put of a firm, an industry, or an entire economy for all ... in the use of factor inputs in production and the resulting distribution of income to those factors.

One feature of the operational amplifier is that it can have ____________. A. up to ten outputs B. binary coded decimal inputs C. several hundred amps at the output D. inverting and non-inverting inputs

Description : One feature of the operational amplifier is that it can have ____________. A. up to ten outputs B. binary coded decimal inputs C. several hundred amps at the output D. inverting and non-inverting inputs

Last Answer : Answer: D

If the outputs marked 'Q' of 'FF-A', 'FF-B' and 'FF-C' in the circuit shown in the illustration are at logic levels 0, 1, and 1 respectively, what levels are present at the 'NOT Q' outputs? EL-0087 A. 1, 0, and 1 B. 1, 0, and 0 C. 0, 0, and 1 D. 0, 1, and 1

Description : If the outputs marked 'Q' of 'FF-A', 'FF-B' and 'FF-C' in the circuit shown in the illustration are at logic levels 0, 1, and 1 respectively, what levels are present at the 'NOT Q' outputs? EL-0087 A. 1, 0, and 1 B. 1, 0, and 0 C. 0, 0, and 1 D. 0, 1, and 1

Last Answer : Answer: B

Which one of the following statements best defines procd. The process by which products and services required for the project are acquired.urement? a. A technique to establish the best approach for obtaining the resources for the project. b. A group of interrelated resources and activities that transform inputs into outputs. c. The description of the purpose, form and components to support delivery of a product.

Description : Which one of the following statements best defines procurement? a. A technique to establish the best approach for obtaining the resources for the project. b. A group of interrelated resources and ... product. d. The process by which products and services required for the project are acquired.

Last Answer : d. The process by which products and services required for the project are acquired.

Which one of the following best describes users? a. Providers of both strategic and tactical direction to the project. b. Those intended to receive benefits or operate outputs. c. Facilitators of an appropriate issue resolution procedure. d. Those providing full-time commitment to the project.

Description : Which one of the following best describes users? a. Providers of both strategic and tactical direction to the project. b. Those intended to receive benefits or operate outputs. c. Facilitators of an appropriate issue resolution procedure. d. Those providing full-time commitment to the project.

Last Answer : b. Those intended to receive benefits or operate outputs.

____ and ____ refer to the mechanism applied to the inputs to create the desired outputs.

Description : ____ and ____ refer to the mechanism applied to the inputs to create the desired outputs.

Last Answer : Ans. Tools and techniques

A function point is a measure of program size based on the number and complexity of inputs, outputs, queries, files and program interfaces.

Description :  A function point is a measure of program size based on the number and complexity of  inputs, outputs, queries, files and program interfaces.

Last Answer : Ans: True

A(n) ____________ is a measure of program size based on the number and complexity of inputs, outputs, queries, files, and program interfaces. a. function point b. line of code c. project plan d. standard module e. workplan

Description : A(n) ____________ is a measure of program size based on the number and  complexity of inputs, outputs, queries, files, and program interfaces.  a. function point  b. line of code  c. project plan  d. standard module  e. workplan

Last Answer : a. function point

The outputs of the Close Project process include all of the following except for which one? A. Administrative closure procedure B. Formal acceptance C. Lessons learned D. Closed contracts

Description : The outputs of the Close Project process include all of the following except for which one?  A. Administrative closure procedure B. Formal acceptance C. Lessons learned D. Closed contracts

Last Answer : C. Lessons learned

Which one of the following statements best defines procurement? a. A technique to establish the best approach for obtaining the resources for the project. b. A group of interrelated resources and activities that transform inputs into outputs. c. The description of the purpose, form and components to support delivery of a product. d. The process by which products and services required for the project are acquired.

Description : Which one of the following statements best defines procurement?  a. A technique to establish the best approach for obtaining the resources for the project.  b. A group of interrelated resources and ... product.  d. The process by which products and services required for the project are acquired.

Last Answer : d. The process by which products and services required for the project are acquired.

Which one of the following best describes users? a. Providers of both strategic and tactical direction to the project. b. Those intended to receive benefits or operate outputs. c. Facilitators of an appropriate issue resolution procedure. d. Those providing full-time commitment to the project.

Description : Which one of the following best describes users?  a. Providers of both strategic and tactical direction to the project.  b. Those intended to receive benefits or operate outputs.  c. ... of an appropriate issue resolution procedure.  d. Those providing full-time commitment to the project.

Last Answer : b. Those intended to receive benefits or operate outputs.

Quality control in the final analysis is : 1. using the technical procedures of monitoring project results to decide if the outputs meet the requirements 2. a production system 3. an inspection system 4. fitness for purpose

Description : Quality control in the final analysis is : 1. using the technical procedures of monitoring project results to decide if the outputs meet  the requirements  2. a production system  3. an inspection system  4. fitness for purpose

Last Answer : 1. using the technical procedures of monitoring project results to decide if the outputs meet  the requirements

What is the name of the function in the following statement “A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0”? a) Step function b) Heaviside function c) Logistic function d) Perceptron function

Description : What is the name of the function in the following statement “A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0”? a) Step function b) Heaviside function c) Logistic function d) Perceptron function

Last Answer : b) Heaviside function

A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0. a) True b) False c) Sometimes – it can also output intermediate values as well d) Can’t say

Description : A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0. a) True b) False c) Sometimes – it can also output intermediate values as well d) Can’t say

Last Answer : a) True

. In an Unsupervised learning ____________ a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given

Description : . In an Unsupervised learning ____________ a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given

Last Answer : b) Specific output values are not given

Which were built in such a way that humans had to supply the inputs and interpret the outputs? a) Agents b) AI system c) Sensor d) Actuators

Description : Which were built in such a way that humans had to supply the inputs and interpret the outputs? a) Agents b) AI system c) Sensor d) Actuators

Last Answer : b) AI system

Outputs of instruction/data path in CU are. a. Reg R/W b. Load/Reg-Reg c. ALU function select d. Load control e. Read control f. IR Latch g. JUMP/Branch/Next PC h_ = All of these

Description : Outputs of instruction/data path in CU are. a. Reg R/W b. Load/Reg-Reg c. ALU function select d. Load control e. Read control f. IR Latch g. JUMP/Branch/Next PC h_ = All of these

Last Answer : h_ = All of these

Value added is: a) the cost saving through production and marketing efforts within the firm. b) the value that a firm adds through the development of dynamic capabilities. c) the value that a firm adds to bought-in materials and services through outsourcing. d) the difference between the cost of inputs and the market value of outputs

Description : Value added is: a) the cost saving through production and marketing efforts within the firm. b) the value that a firm adds through the development of dynamic capabilities. c) the value that a ... through outsourcing. d) the difference between the cost of inputs and the market value of outputs

Last Answer : the difference between the cost of inputs and the market value of outputs

Various Organizational routines & processes that determines how efficiently and effectively the Organization transforms it’s inputs into outputs is called: A. Strength B. Core Competencies C. Capabilities D. Customer Value

Description : Various Organizational routines & processes that determines how efficiently and effectively the Organization transforms it’s inputs into outputs is called: A. Strength B. Core Competencies C. Capabilities D. Customer Value

Last Answer : Core Competencies

What is a firm? a. A president, some vice presidents, and some employees b. Any organization that wants to make a profit. c. Any accumulation of productive assets. d. Any organization that turns inputs into outputs

Description : What is a firm? a. A president, some vice presidents, and some employees b. Any organization that wants to make a profit. c. Any accumulation of productive assets. d. Any organization that turns inputs into outputs

Last Answer : d. Any organization that turns inputs into outputs

An advantage of a distributed word processing network is 1) increased number of reports handled 2) less delay in inter-office communications 3) greater corporate control over outputs 4) All of these

Description : An advantage of a distributed word processing network is 1) increased number of reports handled 2) less delay in inter-office communications 3) greater corporate control over outputs 4) All of these

Last Answer : 2) less delay in inter-office communications

An I/O device which provides photographic outputs for printing galleys, is the 1) Camera printer 2) Automatic typesetter 3) Radix printer 4) All of these

Description : An I/O device which provides photographic outputs for printing galleys, is the 1) Camera printer 2) Automatic typesetter 3) Radix printer 4) All of these

Last Answer : 4) All of these

Point out the wrong statement. a) The Mapper outputs are sorted and then partitioned per Reducer b) The total number of partitions is the same as the number of reduce tasks for the job c) The intermediate, sorted outputs are always stored in a simple (key-len, key, value-len, value) format d) None of the mentioned

Description : Point out the wrong statement. a) The Mapper outputs are sorted and then partitioned per Reducer b) The total number of partitions is the same as the number of reduce tasks for the job c) The intermediate, ... always stored in a simple (key-len, key, value-len, value) format d) None of the mentioned

Last Answer : None of the mentioned

A waste heat recovery unit (WHRU) is an_________ that transfers heat from process outputs at high temperature to another part of the process for some purpose, usually increased efficiency. a) Energy recovery heat exchanger b) Energy recovery heat diffuser c) Both ‘a’ and ‘b’ d) None of the above

Description : A waste heat recovery unit (WHRU) is an_________ that transfers heat from process outputs at high temperature to another part of the process for some purpose, usually increased efficiency. a) Energy recovery heat exchanger b) Energy recovery heat diffuser c) Both ‘a’ and ‘b’ d) None of the above

Last Answer : Energy recovery heat exchanger

A waste heat recovery unit is an energy recovery heat exchanger that transfers heat from process outputs at ........ a) High temperature b) Medium temperature c) Low temperature d) Both a & b

Description : A waste heat recovery unit is an energy recovery heat exchanger that transfers heat from process outputs at ........ a) High temperature b) Medium temperature c) Low temperature d) Both a & b

Last Answer : High temperature

If the differential amplifier is configured with a single input and differential outputs, what will the output signals be?

Description : If the differential amplifier is configured with a single input and differential outputs, what will the output signals be?

Last Answer : Each output will be a sine wave with a peak-to-peak amplitude of 100 millivolts. The output signals will be 180 degrees out of phase with each other.

How many inputs and outputs are possible with a differential amplifier?

Description : How many inputs and outputs are possible with a differential amplifier?

Last Answer : Two inputs, two outputs.

Circuits which maintain constant voltage or current outputs are called dc voltage or dc current ___.

Description : Circuits which maintain constant voltage or current outputs are called dc voltage or dc current ___.

Last Answer : Regulators.

A receive tty set provides outputs in what formats?

Description : A receive tty set provides outputs in what formats?

Last Answer : Page-size copy paper and perforated tape.

What are the two methods of connecting the outputs from a three-phase alternator to the load?

Description : What are the two methods of connecting the outputs from a three-phase alternator to the load?

Last Answer : Wye and Delta.

How many voltage outputs are available from a two-phase three-wire alternator?

Description : How many voltage outputs are available from a two-phase three-wire alternator?

Last Answer : Three.

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii