What are the advantages and disadvantages of a wooden cutting board compared with plastic or glass?

1 Answer

Answer :

As with any cutting boards, you should definately replace any worn out or heavily scarred board as this could be harmful as it traps food and bacteria in the cracks and cuts. The advantage of a wooden board would be that if food bacteria does get caught into cuts of board they eventually die off. As for plastic it usually does not die off and you are more prone to bacteria. With glass you would not have this issue, as it most likely will not get trapped into the crevices as there wouldn't be one. Glass boards aren't very popular and are usually hard to find. The disadvantage of a wooden board would be that you easily scrape and cut the board up with a knife while cutting. With plastic it is always harder to cut through with the knife. Finally, for cleaning purposes you can't say whether one is better than the other, if you sanitize the product you will be okay. There are advantages and disadvantages to both, but overall it is just a matter of opinion.

Related questions

Description : Cleaning a wooden cutting board? Oiling it?

Last Answer : don't leave it to dry on formica. the sludge is full of bacteria. dry it each time you use it, or put it in a position where it'll get air on all sides.

Description : How do I clean my wooden cutting board?

Last Answer : Lemon and salt. Cut a lemon in half, put some coarse salt on the board, and scrub the board with the cut side down of the lemon. Then rinse it off.

Description : Why isn't a plastic cutting board good? Because it's better than wood?

Last Answer : Wood is much more hygienic. Easier to clean and non-slip. It can be cleaned at higher temperatures and does not stick to food residue. That's why they use it more. Or more fashionable, but it's secondary.

Description : Are wooden cutting boards more sanitary than plastic cutting boards?

Last Answer : Wooden cutting boards are more sanitary than plastic cutting boards. because plastic cutting boards have chemical issues which bad our health. On the other hand Wooden cutting boards do not have any ... are not harmful to our mother earth. It is safe for our environment from plastic pollution.

Description : What is the Advantages and Disadvantages of Textile Laser Cutting?

Last Answer : Advantages and Disadvantages of Textile Laser CuttingCutting textile into pieces is one of the crucial stages in the process of soft material production. It's only after the cutting of ... long list of upsides it offers. The advantages of laser cutting are flexibility, precision, repeatability, sp

Description : Describe Briefly The Advantages And Disadvantages Of Using Plastic And Timber Fenders?

Last Answer : Answer : The advantages and disadvantages of using plastic fenders are as follows: Plastic fenders are low in strength with a relatively high resistance to abrasion. Plastic fenders are resistant ... of contact. Also since they are made from recycled material they are environmental friendly.

Description : Write advantages and disadvantages of plastic as a material for container and state its type.

Last Answer : Advantages: 1. Light in weight and can be handled easily. 2. Poor conductor of heat. 3. Sufficient mechanical strength. 4. Transported easily. 5. Unbreakable. 6. Available in various shapes ... (PVC) Low-density polyethylene (LDPE) Polypropylene (PP) Polystyrene (PS) Polyester (PES) etc.

Description : Mention advantages and disadvantages of plastic containers.

Last Answer : Advantages:   1. Light in weight and can be handled easily. 2. Poor conductor of heat. 3. Sufficient mechanical strength. 4. Transported easily. 5. Unbreakable. 6. Available in various ... as preservatives. 5. Relatively expensive. 6. Special type of gum or adhesive required for labelling.

Description : What are the advantages and disadvantages of laser lipo surgery as compared to traditional liposuction?

Last Answer : Laser Liposuction is a very experimental treatment and most people are still avoiding it. It can be less painful but it is much more expensive.

Description : Slip ring induction motor advantages and disadvantages compared to squirrel cage motors?

Last Answer : Advantages: High starting torque with low starting current Smooth acceleration under heavy loads No abnormal heating during starting Good running characteristics after external rotor resistances are cut out ... cage motors The speed regulation is poor when run with resistance in the rotor circuit

Description : What are the advantages and disadvantages of using a silicon made bong instead of a standard glass bong?

Last Answer : So, glass is cheaper and more breakable than silicone, but it's also cleaner. While silicone is virtually indestructable and very flexible (and easy to hide in most places), sometimes the silicone ... would consider a bigger advantage or disadvantage based on what you are looking for in a bong.

Description : Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Last Answer : Economical. Available in variety of sizes and shapes.  Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flak formation

Description : Give advantages and disadvantages of glass as a material used for pharmaceutical container and state its types.

Last Answer : Advantages:   Economical. Available in variety of sizes and shapes. Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... -lime glass or Alkali glass (Type-III). 4. General Purpose soda-lime glass (Type-IV).

Description : How do I fix a wooden floor board?

Last Answer : answer:Is there access to that part of the floor from beneath? If it were mine I would try to turn it over. no problems of fit, no problems of matching grain. Edit: I asked about getting to it from underneath because that way it will be easier to get it up without breaking it.

Description : I left a cutting board in the water in the sink at night and it completely bent. How to straighten it again?

Last Answer : A friend placed a bucket of water on a wet, twisted cutting board and let it dry like this. It 's just right.

Description : A wooden board 2 meters long, 30 centimeters wide and 4 centimeters thick floats in water with 1 centimeter of its thickness above the surface. The mass of the board is: w) 1.8 kilograms x) 18 kilograms y) 24 kilograms z) 176 kilograms

Last Answer : ANSWER: X -- 18 KILOGRAMS

Description : In the spring, I will replace our old front door again, but I haven’t decided yet whether it should be plastic or wood. Do you have experience? I wonder if it helps in the decision. .   

Last Answer : We recently replaced all the doors and windows and had the same dilemma. Wood or plastic. True, more expensive, but eventually it became wood. Because both are well-insulated, durable and aesthetic, ... multi-point lock with a simple screwdriver. This is much more difficult to do than wood.    

Description : Is it better to use a plastic pallet or a wooden one?

Last Answer : Plastic pallets are generally more expensive than wooden pallets but are more durable and easier to clean. If price is no object then plastic pallets are better.

Description : Will plastic blinds last as long as wooden blinds?

Last Answer : Although wooden blinds are more expensive, if you care for them properly by using a special finish, they will last much longer than vinyl.

Description : Are plastic tinker toys compatible with wooden tinker toys?

Last Answer : Tinker toys are very popular and a lot of people come across this dilemma. For the plastic and wooden tinker toys to become compatible with one another, it is best to look on the tinker toy site or go into a toy store that would know whether they are compatible with each other or not.

Description : Soil samples are collected to? a Plastic bags b Metal containers c Gunny bags d Wooden boxes

Last Answer : a Plastic bags

Description : Plastic or wooden windows: which ones to prefer?

Last Answer : Plastic or wooden windows: which ones to prefer? Over the past few years, the population of Russia has been actively replacing wooden window structures with plastic ones. At the same time, the ... one more advantage of a wooden glass unit: it can be repaired even several decades after installation.

Description : The type of flooring suitable for use in churches, theatres, public libraries and other places where noiseless floor covering is desired is (A) Cork flooring (B) Glass flooring (C) Wooden flooring (D) Linoleum flooring

Last Answer : Answer: Option A

Description : What are the advantages of modern wooden windows?

Last Answer : What are the advantages of modern wooden windows? Today, you can see how in multi-storey residential buildings, office premises, private houses, cottages instead of PVC windows, wooden ... serve for several decades, with practically no loss of their original physical and chemical properties.

Description : What material should I use a chopping board to avoid dulling knives? I don't use plastic, wood, bamboo, glass anymore. I use plastic the most. It is easy to wash and when it is more scratched, I buy new ones.

Last Answer : So that your legs do not dull? ... So you get a quality leg instead of a board .... you will sharpen a quality knife with an overview on the plate from the bottom .... or you will perceive it on the steel and you ... the garden to the grill I have ... marble own production .. .... ☢ ☠ ☣ ☠ ☣ ☠ ☣ ☠ ☢

Description : I have a big but really big cutting board for slicing, which is a shame not to use it. It's a little out of date. How to renovate it? It is wooden. It occurred to me to buy emery and osmirkonat it.

Last Answer : Carefully sand the fine sandpaper. Or better yet, at a carpenter or joiner, stretch the board with a planer. If you pull 1 mm from each side, it will be a little weaker, but it will be like new.

Description : I need to buy a new cutting board for vc. What sells it for? Is it numbered somehow? How do I know the right dimension?

Last Answer : Depending on the pitch of the screws and the length. It is best to either measure (draw) properly or disassemble and take it to the store.

Description : can I use marble slab for cutting board?

Last Answer : yes you may, its actually way healthier to use the marble than it is using a wood cutting board because of the germs and bacteria that can accumalate in the wood that will not and cannot on the marble

Description : How should I clean and disinfect a large cutting board?

Last Answer : There are several ways. One natural remedy is to use vinegar and scrub with kosher salt as an abrasive. The other way would be to add a tablespoon of bleach to a gallon of water. Both are safe, but not everyone prefers the same method.

Description : Do I need a different cutting board for poultry, fish, and red meat?

Last Answer : No,but you need to keep your cutting board clean.As soon as you've finished using it you should wash it thoroughly and rinse it with scalding hot water.It's best not to have a board with a lot of crevices in it where stuff can collect and fester.

Description : Functions of mold board plough a. Cutting the furrow slice. c) body to yoke b. Increase the depth of operation. d) length of the beam

Last Answer : Cutting the furrow slice.

Description : is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board d) Knife Section

Last Answer :   <!-- [endif] -->Knife Section

Description : is the function of mold board plough. a) Cutting the furrow slice b) Lifting the soil c) Pulverizing the soil d) All of the above

Last Answer : All of the above

Description : In nursery production, a “liner” refers to __________. a. A plastic bag b. A rooted cutting or small seedling c. A type of garden tool d. A plastic mulch covering

Last Answer : A rooted cutting or small seedling

Description : Why are gift cards so popular when they have some major disadvantages compared to plain old cash or checks?

Last Answer : answer:They have some advantages, too. When I get straight money, I just put it into the pool for bills and food and such. I feel guilty not doing that, because I live chronically in debt. ... , real gift. Maybe they are becoming more popular because more and more folks are having money troubles?

Description : What are the disadvantages of RIA, when compared to ELISA?

Last Answer : 1. Since radio-isotopes are used, only approved laboratories could take up the assay. 2. The shelf life of the reagent is short.

Description : One of the disadvantages of user level threads compared to Kernel level threads is (1) If a user level thread of a process executes a system call, all threads in that process are ... privileges. (4) The library procedures invoked for thread management in user level threads are local procedures.

Last Answer : If a user level thread of a process executes a system call, all threads in that process are blocked.

Last Answer : A diamond pencil is usually used for cutting. This pencil is called glass cutter. With this pencil the glass is scratched and it is broken into two pieces by pressing. But I want to cut round glass things ... . You don't have to just cut the glass in hand. You also need to know some strategies.

Description : Is it really possible to cut glass underwater with scissors? I don't want to destroy my scissors. But I'm interested.

Last Answer : Yes, you can cut glass. Glass can be divided by a number of other methods. Of interest is, for example, the possibility of cutting thin glass with ordinary scissors. The glass must be cut in a container with ... blowing, water jet, etc. Source: Petr Z ******* RENESANCE - Art glassmaking M *****

Description : Can I really tell if a diamond is real by cutting glass?

Last Answer : To determine if your diamond is real, use a magnifying glass up and look at the diamond through the glass. Look for imperfections in the stone. If you're unable to find any, then the diamond is probably fake. the majority of real diamonds have imperfections also called inclusions.

Description : What material is used for cutting glass?

Last Answer : Diamond

Description : are the applications of cutting bar. a) Cutting metal sheets. b) Cutting glass type materials. c) Cutting grasses and forage. d) None of these

Last Answer : Cutting grasses and forage

Description : What's the name of that "classic" board game featuring plastic fruit?

Last Answer : hi ho cherrio?

Description : How many years of schooling and training does it take to become a board certified plastic surgeon?

Last Answer : To become a board certified plastic surgeon, you must complete a bachelor's degree which takes 4 years. You must also complete residency training which will take you 5-6 years.

Description : If a child is a back bencher and is unable to watch the black board clearly. As a result he stands, sees and sits repeatedly. What inference will you draw regarding the case? Options: A) The child is ... is under shining effect of light C) The child has defective-vision D) both (a) and (C)

Last Answer : D) both (a) and (C) 

Description : Write any three qualities of packaging material and any three disadvantages of glass as a material for packaging. 

Last Answer : Qualities of packaging material i. Neutral ii. No interaction. iii. Stability against environmental factor. iv. Withstand wear and tear during handling. v. Withstand changes in pressure and ... aqueous preparations, 4) Flaking and weathering of glass are two serious issues related to glass.

Description : Give disadvantages of glass.

Last Answer : Disadvantages: Fragile, easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flake formation

Description : The speed of light in plastic compared to the speed of light in air is a. Slower b. Faster c. The same d. Either lower or faster

Last Answer : a. Slower

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point

Description : The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero

Last Answer : A. less