Mention advantages and disadvantages of plastic containers.

Mention advantages and disadvantages of plastic containers.
by

1 Answer

Answer :

Advantages:  

1. Light in weight and can be handled easily.

2. Poor conductor of heat.

3. Sufficient mechanical strength.

4. Transported easily.

5. Unbreakable.

6. Available in various shapes and sizes.

7. Good protection power.

8. No formation of flakes.

Disadvantages: 

1. Permeable to water vapour and atmospheric gases.

2. Cannot withstand heat without softening or distortion.

3. May interact with certain chemical to cause softening or distortion.

4. May absorb chemicals such as preservatives.

5. Relatively expensive.

6. Special type of gum or adhesive required for labelling.
by

Related questions

Write advantages and disadvantages of plastic as a material for container and state its type.

Description : Write advantages and disadvantages of plastic as a material for container and state its type.

Last Answer : Advantages: 1. Light in weight and can be handled easily. 2. Poor conductor of heat. 3. Sufficient mechanical strength. 4. Transported easily. 5. Unbreakable. 6. Available in various shapes ... (PVC) Low-density polyethylene (LDPE) Polypropylene (PP) Polystyrene (PS) Polyester (PES) etc.

Why plastic containers are more commonly used now a days? Write its demerits.

Description : Why plastic containers are more commonly used now a days? Write its demerits.

Last Answer : Plastic containers are more commonly used now a days for following advantages: 1.They are light in weight and can be handled easily 2.They are poor conductor of heat . 3.They have sufficient ... solution. 5.They are relatively expensive. 6.Special type of gum or adhesive required for labelling.

Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Description : Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Last Answer : Diagram of aerosol container Advantages:   1. Medicament can be delivered directly to affected areas. 2. Absence of air prevents oxidation. 3. Hydrolysis of medicament prevented ... on injured skin. 4. Difficulties occurred during formulation when drug not soluble in propellants.

Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Description : Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Last Answer : Economical. Available in variety of sizes and shapes.  Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flak formation

Define tablet as a dosage form along with advantages and disadvantages.

Description : Define tablet as a dosage form along with advantages and disadvantages.

Last Answer : Definition:  Tablets are solid unit dosage form containing medicament or medicaments usually circular in shape and may be flat or biconvex. Advantages:   1. Easy to administered. 2. Easy to ... . 4. Bioavailability is low. 5. Bitter- tasting drugs, moisture sensetive drugs requires coating.

Define capsule as a dosage form along with its advantages and disadvantages.

Description : Define capsule as a dosage form along with its advantages and disadvantages. 

Last Answer : Definition: Capsule: Capsules are a solid unit dosage form in which the drug substances are enclosed in a water soluble shell or an envelope. Advantages of capsules:  1. Drugs ... 2. Concentrated preparation which needs dilution before administration cannot be given in form of capsule.

Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Description : Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Last Answer : which of the following mill works on the principle of combined impact and attrition

Define Aerosols. What are advantages and disadvantages of Aerosols?

Description : Define Aerosols. What are advantages and disadvantages of Aerosols?

Last Answer : Aerosols may be defined as disperse phase system in which very fine solid particles or liquid droplet gets dispersed in the gases which act as continuous phase. These are pressured packages. ... to injured skin. 4. Difficulties occurred during formulation when drug not soluble in propellants. 

Write the advantages & disadvantages of an evaporating pan

Description : Write the advantages & disadvantages of an evaporating pan

Last Answer : Advantages:   It is simple and cheap to construction.   Easy to clean and maintain.   Economical.  Disadvantages:   Poor coefficient of heat transfer.   Heating surface is ... concentration of thermolabile material.   Evaporating pan is open so vapour cause discomfort to the worker.

Write advantages and disadvantages of tablets.

Description : Write advantages and disadvantages of tablets.

Last Answer : Advantages of tablets: 1. Easy to administered. 2. Easy to dispense. 3. More stable. 4. Accuracy in dose. 5. Bitter and nauseous substance can be easily dispensed. 6. ... remove bitter and unpleasant taste. v) Swallowing is difficult especially for children and ill (unconscious) patients.

Write the advantages and disadvantages of fluidised bed dryer.

Description : Write the advantages and disadvantages of fluidised bed dryer. 

Last Answer : Advantages: i. It give high drying rate. ii. Suitable for thermolabile material. iii. Drying takes place of individual particles. iv. Temperature can be controlled. v. Prevent the ... : i. Turbulence produces cause attrition of particles. ii. Movement can generate electrical charges. 

Give advantages and disadvantages of glass as a material used for pharmaceutical container and state its types.

Description : Give advantages and disadvantages of glass as a material used for pharmaceutical container and state its types.

Last Answer : Advantages:   Economical. Available in variety of sizes and shapes. Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... -lime glass or Alkali glass (Type-III). 4. General Purpose soda-lime glass (Type-IV).

Give advantages, disadvantages and applications of sterilization by ionising radiation.

Description : Give advantages, disadvantages and applications of sterilization by ionising radiation.

Last Answer : Advantages: The method is reliable and can be accurately controlled No degradation of media during sterilization, thus it can be used for thermally labile media Gamma rays have ... Bones and tissue transplant, plastic tubing, catheters and sutures. Sterilization of thermolabile medicaments. 

Why injectables should not be stored in soda lime glass containers?

Description : Why injectables should not be stored in soda lime glass containers?

Last Answer : Soda lime glass container is not used for the storage of parenterals because: i. It yields an appreciable quantity of alkali to water. ii. Flakes separate comparatively easily. iii. On ... 's relatively high coefficient of expansion makes it liable to fracture with sudden changes of temperature. 

Why glass containers are not used these days?

Description : Why glass containers are not used these days? 

Last Answer : Due to following disadvantages glass containers are not used these days: 1) Glass is fragile, 2) Glass is heavy, that can increase transportation charges, 3) Glass containers may release alkali to aqueous preparations, 4) Flaking and weathering of glass are two serious issues related to glass.

Define ‘Containers’. What are the basic materials used in making of container?

Description : Define ‘Containers’. What are the basic materials used in making of container?

Last Answer : Containers: A device that holds the drug and it may or may not be in direct contact with the pharmaceutical dosage form or preparations. Basic materials used in making of container: i)Glass ii) Plastic iii) Metal iv) Paper and board

Draw a well labelled diagram of filter candle. Give its working and disadvantages.

Description : Draw a well labelled diagram of filter candle. Give its working and disadvantages.

Last Answer : Diagram : Working  : The filter candle is placed in a vessel containing the liquid to be filtered. When vacuum is applied, the pressure inside the candle is decreased. Due to ... Disadvantages   1. Chance of clogging/blocking. 2. Traces of material may come in the solution.

Explain in detail evaporating still with its advantage and disadvantages.

Description : Explain in detail evaporating still with its advantage and disadvantages.

Last Answer : It consist of a hemispherical pan made from copper or stainless steel. It is surrounded by a steam jacket. Still is covered from top and connected to condenser. Hemispherical shape ... heat transfer is poor. Heating surface is limited. Not suitable for thermolabile material.

Write construction and disadvantages of short tube evaporator.

Description : Write construction and disadvantages of short tube evaporator.

Last Answer : Construction:   It consists of number of tubes which are from 1 to 2 meters in length and from 40- 80 mm in diameter. About 1000 tubes are fitted in a vessel upto 2.5 meter or ... It is quite complicated and expensive in construction. 2. Difficult to clean. 3. Maintenance is costly.

Write the disadvantages of formaldehyde gas when used for sterilization.

Description : Write the disadvantages of formaldehyde gas when used for sterilization.

Last Answer : i. Weak penetration power. ii. Difficult to maintain high conc. iii. Require high humidity for effectiveness. iv. Readily inactivated. v. Irritant to respiratory tract. vi. Difficult to remove adsorbed gas. 

Write any three qualities of packaging material and any three disadvantages of glass as a material for packaging.

Description : Write any three qualities of packaging material and any three disadvantages of glass as a material for packaging. 

Last Answer : Qualities of packaging material i. Neutral ii. No interaction. iii. Stability against environmental factor. iv. Withstand wear and tear during handling. v. Withstand changes in pressure and ... aqueous preparations, 4) Flaking and weathering of glass are two serious issues related to glass.

Give disadvantages of glass.

Description : Give disadvantages of glass.

Last Answer : Disadvantages: Fragile, easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flake formation

Mention official and unofficial evaluation test for tablets. Describe weight variation test.

Description : Mention official and unofficial evaluation test for tablets. Describe weight variation test. 

Last Answer : Official test list: 1. Size and shape of tablet. 2. Appearance. 3. Content of active ingredient. 4. Uniformity of weight/weight variation test 5. Uniformity of content 6. ... the percentage deviation given in the table and none should deviate by more than twice that percentage.

Mention the application of liposomes in pharmacy.

Description : Mention the application of liposomes in pharmacy.

Last Answer : i)Used in disease caused by intracellular parasites e.g. malaria, tuberculosis and amoebiasis. ii)Liposomes entrapped insulin active orally and can be replaced by intramuscular administration if ... vi)Liposome entrapped actinomycin-D and nitrogen mustard are more effective than parent drug.

Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process.

Description : Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process. 

Last Answer : Limitation: 1. Physical character of the drug: If the drug would block the soxhlet apparatus then this process cannot be used for extraction. Eg opium. Gum, resin, ... for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc. 

Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Description : Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Last Answer : Diagram: Limitations: process cannot be used in following conditions.  Physical character of the drug: Drugs which may block the apparatus such as opium, gums, resins, etc cannot ... process. Chemical constituents: Unsuitable for thermolabile drugs, such as enzymes, alkaloids, etc

Mention all Q.C. tests to be performed on tablets. Explain any one in detail.

Description : Mention all Q.C. tests to be performed on tablets. Explain any one in detail. 

Last Answer : Q.C. Tests:  1. Size and shape of tablet. 2. Appearance. 3. Content of active ingredient. 4. Uniformity of weight/weight variation test 5. Uniformity of content 6. Disintegration. 7. ... are considered to be of good quality if the loss in weight is less than 1%.  Diagram:

Mention different types of closures. Comment on materials used for making closures.

Description : Mention different types of closures. Comment on materials used for making closures.

Last Answer : Types of closures with examples:  1. Plug type. 2. Crown cap. 3. Push-fit cap. 4. Screw closures. Materials used in pharmaceutical closures:   1) Rubber Cork is obtained ... the construction of closure meant for vials, transfusion fluid bottles. Rubber, two types natural or synthetic, 

Mention different methods of size separation and explain any one.

Description : Mention different methods of size separation and explain any one.

Last Answer : Different methods of size separation are: 1. Sieving 2. Cyclone separator. 3. Air separator. 4. Elutriation. SIEVING: Diagram: Construction: In this method fine ... Elutriating tank is used to separate the coarse and fine particles of powder after levigation Diagram:

Mention different mechanisms for size reduction.

Description : Mention different mechanisms for size reduction.

Last Answer : i. Cutting ii. Compression iii. Impact iv. Attrition v. Combined impact and attrition 

Mention precautions to be taken while using of eye drop.

Description : Mention precautions to be taken while using of eye drop. 

Last Answer : Do not touch the tip of the dropper. Never rinse the dropper. Never use eye drop that have changed colour. After instillation of drop, do not close eyes tightly or blink more than usual. Discard the content after one month of use.  

Explain principle of freeze drying. Give its advantages.

Description : Explain principle of freeze drying. Give its advantages.

Last Answer : Principle:  i. The material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water is reduced to less than that of material being dried. ii. ... it is properly sealed in an inert atmosphere. vii. The sterility of the product can be maintained. 

What are advantages of liquid dosage form?

Description : What are advantages of liquid dosage form? 

Last Answer : i) Usually faster acting than the solid dosage forms ii) Maybe easier to take than an oral solid dosage form for patients having difficulty in swallowing tablets or capsules. iii) More ... practical to administer than solid dosage forms for specific patient cases. v) Good patient compliance.

Define microencapsulation.What are its advantages and different techniques involved in it?

Description : Define microencapsulation.What are its advantages and different techniques involved in it?

Last Answer : Microencapsulation : it is the technique in which a thin coating is applied on the particles of solids, liquids, resulting in the formation of micro-capsules ranging from micron to ... 4) Electrostatic Deposition 5) Vacuum deposition 6) Polymerization 7) Multiorific Centrifugal Process.

What are advantages of evaporating still?

Description : What are advantages of evaporating still?

Last Answer : It is simple to construct. Easy to clean and maintain. The vapors are condensed in it. It increases the speed of evaporation and the costly solvent can be recovered. E.g. ethyl alcohol ... to the operator. A vacuum pump can be fitted to the condenser for operation under reduced pressure.

What are advantages of water as menstruum for extraction?

Description : What are advantages of water as menstruum for extraction? 

Last Answer : • It is cheap & easily available. • Non –toxic • Non inflammable. • It has wide solvent action.

Write the advantages of microencapsulation and list different methods of microencapsulation.

Description : Write the advantages of microencapsulation and list different methods of microencapsulation.

Last Answer : Advantages of microencapsulation:  1. To mask the bitter taste of drugs like Paracetamol, Nitrofurantoin etc. 2. To reduce gastric and other gastro intestinal (G.I) tract irritations, ... 4) Electrostatic Deposition 5) Vacuum deposition 6) Polymerization 7) Multiorific Centrifugal Process.

Define Menstrum and Marc. Write the advantages of alcohol as menstrum.

Description : Define Menstrum and Marc. Write the advantages of alcohol as menstrum.

Last Answer : Menstrum :-Solvent used to extract the drug. Marc:-The drug residue which remains behind after extraction. Advantages of alcohol as menstrum   i) The mould and bacteria cannot grow ... is required to concentrate the alcoholic preparations. v) It dissolves selective active ingredients of drugs.

Explain the working of ball mill with a well labeled diagram and give any two advantages

Description : Explain the working of ball mill with a well labeled diagram and give any two advantages

Last Answer : Working:   The drug to be ground is put into the cylinder of the mill and is rotated. The speed of the rotation is very different. At low speed, the mass of balls will slide or roll over each other ... for batch as well as continuous grinding vi)can be used for dry as well as wet grinding.

Write advantages of water as solvent for extraction

Description : Write advantages of water as solvent for extraction

Last Answer : • It is cheap & easily available. • Non –toxic • Non inflammable. • It has wide solvent action 

What are the advantages and disadvantages of a wooden cutting board compared with plastic or glass?

Description : What are the advantages and disadvantages of a wooden cutting board compared with plastic or glass?

Last Answer : As with any cutting boards, you should definately replace any worn out or heavily scarred board as this could be harmful as it traps food and bacteria in the cracks and cuts. The advantage of a ... okay. There are advantages and disadvantages to both, but overall it is just a matter of opinion.

Describe Briefly The Advantages And Disadvantages Of Using Plastic And Timber Fenders?

Description : Describe Briefly The Advantages And Disadvantages Of Using Plastic And Timber Fenders?

Last Answer : Answer : The advantages and disadvantages of using plastic fenders are as follows: Plastic fenders are low in strength with a relatively high resistance to abrasion. Plastic fenders are resistant ... of contact. Also since they are made from recycled material they are environmental friendly.

What are cachets? Mention its advantages and disadvantages.

Description : What are cachets? Mention its advantages and disadvantages.

Last Answer : Definition: - Cachets are the solid Unit dosage form of drugs. These are moulded from rice paper, used to enclose nauseous or disagreeable Powders and are available in different sizes to hold drugs from ... light and moisture 4) The shell is very fragile 5) They cannot be manufactured on large scale

How to get a strong odor out of plastic storage containers?

Description : How to get a strong odor out of plastic storage containers?

Last Answer : answer:Here’s a website that tells you some different ways. I’ve used the soaking and the baking soda method. Both work great.

Can one of the plastic Gladware disposible containers go in the microwave?

Description : Can one of the plastic Gladware disposible containers go in the microwave?

Last Answer : They can, though some people and science will tell you they can’t, due to the leaching of plastic chemicals into your food (yuck). But I do, and I’m not dead. Then again, I’m a starving grad student. I’d eat pretty much anything that was dead.

I have planted tomato plants and a lemon tree in plastic containers and the leaves are yellowing on both. Why?

Description : I have planted tomato plants and a lemon tree in plastic containers and the leaves are yellowing on both. Why?

Last Answer : You don't mention where you are, the variety of the tomato plants or the lemon tree. Are there holes for drainage in the containers? Was it a brand new bag of soil? How are you watering the ... times a day or have a saucer under the plant that is kept full of water all the time. Did you

small,plastic,food,containers,the,stack,kind

Description : small,plastic,food,containers,the,stack,kind

Last Answer : Need Answer

What are the dangers of eating or drinking with plastic containers?

Description : What are the dangers of eating or drinking with plastic containers?

Last Answer : Its is only said that there is low risk of using plastic on food and drinks. In supermarkets, they still use this plastics with BPA for packaging. There are two type of plastics that concerned ... market today.In other part of the world, eliminating of usage of plastics are being practiced already.

Why are LPG tanks and oxygen tanks usually sealed and contained in thick steel containers rather than in plastic or wood?

Description : Why are LPG tanks and oxygen tanks usually sealed and contained in thick steel containers rather than in plastic or wood?

Last Answer : These tanks must be resistant to low temperature, corrosion,they must be tight and resist to pressure if it is needed.

Why have plastic containers replaced glass containers?

Description : Why have plastic containers replaced glass containers?

Last Answer : Plastic containers do not break.