Do I need any special certification to open a pipe inspection service?

Do I need any special certification to open a pipe inspection service?
by

1 Answer

Answer :

Yes, you do need a certification to open a pipe inspection service. This certification will also help you to show your clients that you are certified and are knowledgable in that area. http://nationalwelding.com/ is a site for the National Welding Inspection School that you can achieve your certification at.
by

Related questions

Why would visual inspection of the excess weld metal at the bottom of a cross country pipeline be important? a) It is the most difficult area to weld b) It is the dirtiest part of the pipe as it is near the ground c) Welders always forget to weld the bottom d) It is the most difficult area to radiograph

Description : Why would visual inspection of the excess weld metal at the bottom of a cross country pipeline be important? a) It is the most difficult area to weld b) It is the dirtiest part of the pipe as ... ground c) Welders always forget to weld the bottom d) It is the most difficult area to radiograph

Last Answer : a) It is the most difficult area to weld

Special inspection of distressed bridges Group II shall be carried out by Inspector (Concerned) is a) Once in three months* b) Once in two months c) Once in a month d) Once in six months

Description : Special inspection of distressed bridges Group II shall be carried out by Inspector (Concerned) is a) Once in three months* b) Once in two months c) Once in a month d) Once in six months

Last Answer : a) Once in three months*

Special inspection of distressed bridges shall be carried out by Asst. Engineer is a) Once in three months b) Once in two months* c) Once in a month d) Once in six months

Description : Special inspection of distressed bridges shall be carried out by Asst. Engineer is a) Once in three months b) Once in two months* c) Once in a month d) Once in six months

Last Answer : b) Once in two months*

What are your thoughts on the stuff going on in Tennessee and the mosque that is built, but won't be open for Ramadan because they are dragging their feet on the building inspection?

Description : What are your thoughts on the stuff going on in Tennessee and the mosque that is built, but won't be open for Ramadan because they are dragging their feet on the building inspection?

Last Answer : Since I don’t go to the mosque, I am indifferent. Hope they get it all figured out.

An open in the armature of a DC motor is suspected, but is not found by visual inspection of the commutator. The next step in troubleshooting this problem is to ________________. A. conduct a bar to bar test of the armature B. visually inspect the armature windings C. conduct an insulation resistance test of the armature D. test the commutator for a ground

Description : An open in the armature of a DC motor is suspected, but is not found by visual inspection of the commutator. The next step in troubleshooting this problem is to ________________. A. conduct a ... windings C. conduct an insulation resistance test of the armature D. test the commutator for a ground

Last Answer : Answer: A

Do you need special certification to be an expert witness?

Description : Do you need special certification to be an expert witness?

Last Answer : Being an expert witness may require special certification. It is usually based on trainign, skill, and experience. Expert witness are also known as professional witness.

What should I look out for when taking my car to an automotive inspection service?

Description : What should I look out for when taking my car to an automotive inspection service?

Last Answer : When taking a car to an inspection service, you should look for other happy customers that will provide a reference. Because you are relying on the input from the inspection service, it is very important that it is done right.

The cost of quality quality is a. An expression of expression of an organizatio organization’s performance in performance in quality in quality in financial terms financial terms b. The difference between customers’ expectations of a product or service and their perceptions of their experience of it. c. A proactive approach proactive approach towards quality towards quality management by management by seeking to seeking to prevent defects prevent defects ever being produced. d. The inspection and inspection and testing of testing of the outputs from outputs from a transformation process.

Description : The cost of quality quality is a. An expression of expression of an organizatio organization's performance in performance in quality in quality in financial terms financial terms b. The ... inspection and inspection and testing of testing of the outputs from outputs from a transformation process.

Last Answer : b. The difference between customers’ expectations of a product or service and their perceptions of their experience of it.

For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of the bolts to prevent leakage. c) Immediate replacement is recommended if the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Description : For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of ... the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Last Answer : b) Periodic tightening of the bolts to prevent leakage.

Where do I get special education certification?

Description : Where do I get special education certification?

Last Answer : I think that you have to take a training class first. There are several websites online and if you want to find a school near you I recommend to check the following URL: www.collegesurfing.com/content/special-education-certification/Cached - Similar

Do you have to have special training or certification to drive an 18 wheeler?

Description : Do you have to have special training or certification to drive an 18 wheeler?

Last Answer : You do not need special schooling, but you will have to pass the certification test for your license. You may need to attend a class which will teach you how to drive an 18-wheeler and help you pass the test that is required for the license.

What is a open MRI technician certification?

Description : What is a open MRI technician certification?

Last Answer : An Open MRI technician is a technician that works in MRI's . He opens them and closes them after surgery. You don't need a certificate for this. You can easily apply for the job, you just need to have worked in a hospital and be a medical student.

Where can I find open MRI technician certification?

Description : Where can I find open MRI technician certification?

Last Answer : If you want to get certified for MRI technician you can find open MRI technician certification at: http://education-portal.com/articles/MRI_Technician_Training_Certificate_and_Certification_Program_Options.html More info ... http://www.innerbody.com/careers-in-health/guide-to-becoming-mri-tech.html

What do I need to pass a vehicle safety inspection?

Description : What do I need to pass a vehicle safety inspection?

Last Answer : The manual, which should have come with the car, has lists. Check mileage on the odometer and then cross-reference with manual. If there are safety issues, the auto mechanic will tell you and offer to fix them. Make sure you bring your charge card.

Would my car need to have an exhaust repair in order to pass a NY state inspection?

Description : Would my car need to have an exhaust repair in order to pass a NY state inspection?

Last Answer : If your car does not pass the New York state vehicle inspection and emissions tests that are required and the exhaust is the reason then you will need to have it repaired. After the repair is ... go through the inspection again. If your car passes the first time there is no need for repairs.

The need for insulation cleaning may be determined by _____. A. visual inspection for dirt accumulation B. high megger readings C. low operating temperature D. the time period since the last cleaning

Description : The need for insulation cleaning may be determined by _____. A. visual inspection for dirt accumulation B. high megger readings C. low operating temperature D. the time period since the last cleaning

Last Answer : Answer: A

Gathering information about customers or market is known as _____________ 1. Customer inspection 2. Checking market area 3. Need of a bank 4. Market Research 5. None of these

Description : Gathering information about customers or market is known as _____________ 1. Customer inspection 2. Checking market area 3. Need of a bank 4. Market Research 5. None of these

Last Answer : Market Research

An open pipe is suddenly closed at one end with the result that the frequency of third harmonic of he closed pipe is found to be higher by 100 Hx than

Description : An open pipe is suddenly closed at one end with the result that the frequency of third harmonic of he closed pipe is found to be higher by 100 Hx than

Last Answer : An open pipe is suddenly closed at one end with the result that the frequency of third harmonic of he closed pipe ... 300 Hz` C. `240 Hz` D. `480 Hz`

How many pipe welder jobs are currently open?

Description : How many pipe welder jobs are currently open?

Last Answer : That depends, are you wondering about pipe welder jobs at acertain company, in a certain city, a certain state, or all thejobs in the country? If you want to know about a certain company,contact the ... out. If it is one of the other choices,narrow down the demographic on monster to get an idea.

A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe closed at both ends (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Description : A resonant system has a fundamental frequency of 100 Hz. If the next higher frequency that gives a resonance are 300 Hz and 500 Hz, the system could be (a) A pip open at both ends (b) A pipe ... (c) A string vibrating between two fixed points (d) A pipe open at one end and closed at the other

Last Answer : Ans:(d)

Blowing Air with open pipe is an example of – (1) isothermal process (2) isochroric process (3) Isobaric process (4) Adiabatic process

Description : Blowing Air with open pipe is an example of – (1) isothermal process (2) isochroric process (3) Isobaric process (4) Adiabatic process

Last Answer : (3) Isobaric process Explanation: When air is suddenly exhaled out into a larger volume through the narrow opening, air undergo adiabatic expansion. So blowing air is an adiabatic process. But since it is open pipe, the pressure inside and pressure outside remains same.

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Description : Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Last Answer : (B) Pipe

In centrifugal pump installation, (A) Pump is properly primed before starting (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe (C) The motor may burn out if it is started with empty delivery pipe and with open gate valve (D) All the above

Description : In centrifugal pump installation,  (A) Pump is properly primed before starting  (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe  (C) The ... out if it is started with empty delivery pipe and with open gate valve  (D) All the above 

Last Answer : (D) All the above 

The continuity equation is connected with (A) Open channel/pipe flow (B) Compressibility of fluids (C) Conservation of mass (D) Steady/unsteady flow

Description : The continuity equation is connected with (A) Open channel/pipe flow (B) Compressibility of fluids (C) Conservation of mass (D) Steady/unsteady flow

Last Answer : Answer: Option C

An organ pipe which is open at both ends resonates at its fundamental frequency. Neglecting any end effects, what wavelength is formed by this pipe in this mode of vibration if the pipe is 2 meters long? w) 2 meters x) 4 meters y) 6 meters z) 8 meters.

Description : An organ pipe which is open at both ends resonates at its fundamental frequency. Neglecting any end effects, what wavelength is formed by this pipe in this mode of vibration if the pipe is 2 meters long? w) 2 meters x) 4 meters y) 6 meters z) 8 meters.

Last Answer : ANSWER: X -- 4 METERS

Blowing Air with open pipe is an example of : (1) Isothermal process (2) Isochroric process (3) Isobaric process (4) Adiabatic process

Description : Blowing Air with open pipe is an example of : (1) Isothermal process (2) Isochroric process (3) Isobaric process (4) Adiabatic process

Last Answer : Isobaric process 

Two pumps P & Q can fill a tank in 12 mins and 15 mins respectively while a third pipe R can empty the full tank in 6 mins. P & Q kept open for 5 mins in the beginning and then R is also opened. In what time is tank emptied? A) 30mins B) 35mins C) 40mins D) 45 mins

Description : Two pumps P & Q can fill a tank in 12 mins and 15 mins respectively while a third pipe R can empty the full tank in 6 mins. P & Q kept open for 5 mins in the beginning and then R is also opened. In what time is tank emptied? A) 30mins B) 35mins C) 40mins D) 45 mins

Last Answer : D Part filled in 5 min = 5(1/12 +1/15) = 5*9/60 = ¾ Part emptied in 1 min when all the pumps are opened, = 1/6 – (1/12 + 1/15) = 1/6 – 3/20 = 1/60 Now 1/60 is part emptied in 1 min Therefore ¾ part will be emptied in 60 * ¾ = 45 mins

Two pipes X and Y can fill a bunker in 24 hours. If only pipe X is open then it would take 12 hours longer to fill the bunker. Find how much longer would it take if only pipe Y is open. A) 46hrs B) 32hrs C) 48hrs D) 34hrs

Description : Two pipes X and Y can fill a bunker in 24 hours. If only pipe X is open then it would take 12 hours longer to fill the bunker. Find how much longer would it take if only pipe Y is open. A) 46hrs B) 32hrs C) 48hrs D) 34hrs

Last Answer : C  X= 24+12 = 36 X+Y= 1/24 Y= 1/24 – 1/36 = 3-2/72 = 1/72 Y= 72 X alone= 72-24 = 48 HRS

Two pipe P & Q fill a tab in 5 hrs and 20 hrs respectively. If both the pipes are open then due to the leakage, it took 30mins more to fill the tab. If the tab is full, how long will it take for the leakage alone to empty the tank? A) 28 B) 24 C) 36 D) 12

Description : Two pipe P & Q fill a tab in 5 hrs and 20 hrs respectively. If both the pipes are open then due to the leakage, it took 30mins more to fill the tab. If the tab is full, how long will it take for the leakage alone to empty the tank? A) 28 B) 24 C) 36 D) 12

Last Answer : C Part filled by(P+Q) in 1 hr = 1/5 + 1/20 = ¼ So P & Q together can fill the tank in 4 hrs. Work done by the leak in 1 hr = 1 / 4 - 2/9 Leak will empty the tank in 36 hrs.

Two filling tap can fill a dumper in 14 and 28 min. respectively and when the waste tap is open, they can together fill it in 35 min. The waste pipe can empty the full dumper in – A) 152/9 hrs. B) 137/7 hrs. C) 60/9 hrs. D) 140/11 hrs.

Description : Two filling tap can fill a dumper in 14 and 28 min. respectively and when the waste tap is open, they can together fill it in 35 min. The waste pipe can empty the full dumper in – A) 152/9 hrs. B) 137/7 hrs. C) 60/9 hrs. D) 140/11 hrs.

Last Answer :  D 1/14 + 1/28 – 1/35 =>10 + 5 – 4/140 =>11/140 =>140/11 => hence answer is 140/11 hours.

Is there any service provider for ISO 14001 Certification in Online?

Description : Is there any service provider for ISO 14001 Certification in Online?

Last Answer : Want to build an effective environmental management system? Looking for a shoulder to support you in all the steps of ISO 14001 Certification process? Here is IAS France. Call us now to get certified!9962590571Integrated Assessment Services

What size pipe for a 150 amp service panel?

Description : What size pipe for a 150 amp service panel?

Last Answer : Need answer

A _____ is a TCP name for a transport service access point. a. port b. pipe c. node d. protocol

Description : A _____ is a TCP name for a transport service access point. a. port b. pipe c. node d. protocol

Last Answer : a. port

A _____ is a TCP name for a transport service access point. a. port b. pipe c. node d. protocol

Description : A _____ is a TCP name for a transport service access point. a. port b. pipe c. node d. protocol

Last Answer : a. port

Service connections to consumers houses, are generally provided with (A) Copper pipes (B) Hume pipes (C) Galvanised iron pipes (D) P.V.C. pipe

Description : Service connections to consumers houses, are generally provided with (A) Copper pipes (B) Hume pipes (C) Galvanised iron pipes (D) P.V.C. pipe

Last Answer : (C) Galvanised iron pipes

Air valves are generally provided in pressure pipes of water supply (A) At pipe junctions (B) At summits (C) At low points (D) Near service pipes

Description : Air valves are generally provided in pressure pipes of water supply  (A) At pipe junctions  (B) At summits  (C) At low points  (D) Near service pipes 

Last Answer : (B) At summits 

From the distribution main of 40 mm size, number of service pipe of 20 mm size can be taken off are ------- a)3 B) 6* c) 10 d) 12

Description : From the distribution main of 40 mm size, number of service pipe of 20 mm size can be taken off are ------- a)3 B) 6* c) 10 d) 12

Last Answer : B) 6*

From distribution main of 40 mm size , number of service pipe of 15 mm size can be taken off are--------- a) 3 b) 6 c) 10 d) 12*

Description : From distribution main of 40 mm size , number of service pipe of 15 mm size can be taken off are--------- a) 3 b) 6 c) 10 d) 12*

Last Answer : d) 12*

Do I need special insurance or licenses to open a bed and breakfast?

Description : Do I need special insurance or licenses to open a bed and breakfast?

Last Answer : No, you don't need a special insurance or licenses to open a bed and breakfast. You can read about how to start one at www.fabjob.com/BedAndBreakfast.asp

Do you need a special license to open a Hair salon in Miami,Ohio?

Description : Do you need a special license to open a Hair salon in Miami,Ohio?

Last Answer : You do need a business license to open a Hair salon. Salon owners must apply for and receive licensing before they can operate their business.

In the state of NC does the 3rd brake have to work in order to pass inspection?

Description : In the state of NC does the 3rd brake have to work in order to pass inspection?

Last Answer : Yes, according to this question and answer. Welcome to Fluther!

There is a big BOOM in your home, upon inspection you find 1/3 of your home is gone, your first thoughts are?

Description : There is a big BOOM in your home, upon inspection you find 1/3 of your home is gone, your first thoughts are?

Last Answer : Tornado’s.

When buying a house, who should make sure you get a Home Inspection?

Description : When buying a house, who should make sure you get a Home Inspection?

Last Answer : answer:The buyer is responsible. On our mortgages, the lender did require a home inspection as part of the paperwork, but we had to pay for it. If the home had failed the inspection in some major ... inspection and take a camera and paper with you so you can take pictures and notes along the way.

Can a car pass inspection in the state of Texas with a missing outside mirror ?

Description : Can a car pass inspection in the state of Texas with a missing outside mirror ?

Last Answer : I’m in Texas, Goldielocks6138, and I doubt you’d pass. May depend on how lenient a particular inspection station is, but those sound like deal-breaking issues.

Did I get ripped off in a car inspection scam?

Description : Did I get ripped off in a car inspection scam?

Last Answer : I'm not following. Did you have them replace the wipers but not the blades? If your blades are ripped and won't work, they have to fail the car. A good inspection place will let you go ... not already out of inspection. If your cars inspection is already expired, they will fail the car for wipers.

Any tips for my new-home inspection tomorrow?

Description : Any tips for my new-home inspection tomorrow?

Last Answer : Is your home being inspected or are you have someone inspect a home youre buying? Either way, a home inspector will tell you if they find anything. Everything from small problems to gigantic ones. And if there is something specific you want them to look at, let them know.

Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Last Answer : b.Automatic product sorting

A man was shot to death while in his car. There were no powder marks on his clothing, which indicated that the gunman was outside the car. However, all the windows were up and the doors locked. After a close inspection was made, the only bullet-holes discovered were on the man's body. How was he murdered? -Riddles

Description : A man was shot to death while in his car. There were no powder marks on his clothing, which indicated that the gunman was outside the car. However, all the windows were up and the doors locked. ... was made, the only bullet-holes discovered were on the man's body. How was he murdered? -Riddles

Last Answer : The victim was in a convertible. He was shot when the top was down.

attribute inspection measures -General Knowledge

Description : attribute inspection measures -General Knowledge

Last Answer : A. if the product is good or bad.