Where does the drafting stage comes after which to stages?

Question

Where does the drafting stage comes after which to stages?

asked Jan 16, 2022 by anonymous

1 Answer

Answer :

Need answer

answered Jan 16, 2022 by anonymous

Related questions

After the IF stages have been aligned, the next stage to align in FM receiver is. A. local oscillator B. limiter stage C. RF amplifier D. mixer stage

Description : After the IF stages have been aligned, the next stage to align in FM receiver is. A. local oscillator B. limiter stage C. RF amplifier D. mixer stage

Last Answer : A. local oscillator

List the stages in the evolution of the earth and explain each stage in brief. -Geography

Description : List the stages in the evolution of the earth and explain each stage in brief. -Geography

Last Answer : The earth was mostly in a volatile state during its primordial stage. Due to gradual increase in density the temperature inside has increased. As a result the material inside started getting separated ... years. It can be assumed that life began to evolve sometime 3,800 million years ago,

Name the four stages in the lifecycle of a silk moth. Explain each stage. -Science-7

Description : Name the four stages in the lifecycle of a silk moth. Explain each stage. -Science-7

Last Answer : Silk moth is a large white insect .The different stages in the life cycle of silk moth are- Egg- it is the first stage of the life cycle .The female moth lays its eggs during the summer.The egg ... changes into a moth which comes out of the cocoon. The female adults lay egg and the cycle continues.

erikson argued that each stage of the psychosocial stages of lifespan development is characterized by a?

Description : erikson argued that each stage of the psychosocial stages of lifespan development is characterized by a?

Last Answer : The idea of white supremacy and indeed the modern concept of race itself arose during the process of world conquest by Europeans. Carl von Linnaeus's four-fold classification of humans classifies Europeans ... and the psychology of more evolved humans. Psychologists take human behavior as a m

Given below is a schematic break-up of the phases/stages of cell cycle :- Which one of the following is the correct indication of the stage/phase in t

Description : Given below is a schematic break-up of the phases/stages of cell cycle :- Which one of the following is the correct indication of the stage/phase in t

Last Answer : Given below is a schematic break-up of the phases/stages of cell cycle :- Which one of the ... Metaphase C. C- Karyokinesis D. D- Synthesis phase

Bouquet-stage occur in which sub stages of prophase -I ?

Description : Bouquet-stage occur in which sub stages of prophase -I ?

Last Answer : Bouquet-stage occur in which sub stages of prophase -I ? A. Leptotene B. Zygotene C. Pachytene D. Diplotene

What are the stages of Mitosis and what occurs in each stage?

Description : What are the stages of Mitosis and what occurs in each stage?

Last Answer : What is the answer ?

For a multistage compressor, the polytropic efficiency is A. the efficiency of all stages combined together B. the efficiency of one stage C. Constant throughout for all the stages D. a direct consequence of the pressure ratio

Description : For a multistage compressor, the polytropic efficiency is A. the efficiency of all stages combined together B. the efficiency of one stage C. Constant throughout for all the stages D. a direct consequence of the pressure ratio

Last Answer : ANSWER : C

VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Description : VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Last Answer : (4) On all stages between production and sale Explanation: Value Added Tax (VAT) is imposed on the value added to each commodity by a firm during all stages of production and distribution. In ... introduced as an indirect value added tax (VAT) into the Indian taxation system from 1 April 2005.

(4) Liquid Hydrogen + Liquid Oxygen Explanation: LOX and liquid hydrogen, used in the Space Shuttle orbiter, the Centaur upper stage of the Atlas V, Saturn V upper stages, the newer Delta IV rocket, the H-IIA rocket, and most stages of the European Ariane rockets. Liquid fueled rocicets have higher specific impulse than solid rockets and are capable of being throttled, shut down, and restarted. Only the combustion chamber of a liquid fueled rocket needs to withstand high combustion pressures and temperatures and they can be regeneratively cooled by the liquid propellant.

Description : (4) Liquid Hydrogen + Liquid Oxygen Explanation: LOX and liquid hydrogen, used in the Space Shuttle orbiter, the Centaur upper stage of the Atlas V, Saturn V upper stages, the ... to withstand high combustion pressures and temperatures and they can be regeneratively cooled by the liquid propellant.

Last Answer : The BOD values of water indicate the (1) amount of organic debris (2) amount of oxygen used for biochemical oxidation (3) amount of oxygen used for biochemical reduction (4) amount of ozone used for biochemical oxidation

When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Last Answer : D. internal receiver noise.

One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the high power output. The purpose of which is to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Description : One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the ... to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Last Answer : B. MOPA

Among the critical stages, the most critical stage of wheat crop for irrigation is—(A) CRI–Crown Root Initiation stage (B) Tillering stage (C) Jointing stage (D) Flowering stage

Description : Among the critical stages, the most critical stage of wheat crop for irrigation is—(A) CRI–Crown Root Initiation stage (B) Tillering stage (C) Jointing stage (D) Flowering stage

Last Answer : (A) CRI–Crown Root Initiation stage

Given below is a schematic break-up of the phases/stages of cell cycle. Which one of the following is the correct indication of the stage/phase in the cell cycle? (a) C - karyokinesis (b) D - synthetic phase (c) A - cytokinesis (d) B - metaphase

Description : Given below is a schematic break-up of the phases/stages of cell cycle. Which one of the following is the correct indication of the stage/phase in the cell cycle? (a) C - karyokinesis (b) D - synthetic phase (c) A - cytokinesis (d) B - metaphase

Last Answer : (b) D - synthetic phase

Phosphatic fertilisers (A) Are useful during early stage of the plant growth (B) Accelerate fruit formation in later stages of growth (C) Lessen the effect of excessive nitrogen application (D) None of these

Description : Phosphatic fertilisers (A) Are useful during early stage of the plant growth (B) Accelerate fruit formation in later stages of growth (C) Lessen the effect of excessive nitrogen application (D) None of these

Last Answer : (B) Accelerate fruit formation in later stages of growth

The stages such as awareness stage, conviction stage, liking stage, preference stage and actual purchase stage are all stages of the process called A. channeling stages B. buyer readiness stage C. channel designing stages D.strategic stages

Description : The stages such as awareness stage, conviction stage, liking stage, preference stage and actual purchase stage are all stages of the process called A. channeling stages B. buyer readiness stage C. channel designing stages D.strategic stages

Last Answer : B. buyer readiness stage

Stages such as conviction stage, liking stage, preference stage, and actual purchase stage are all of the process called A.channeling B.buyer readiness C.channel designing D.strategic Answer: B

Description : Stages such as conviction stage, liking stage, preference stage, and actual purchase stage are all of the process called A.channeling B.buyer readiness C.channel designing D.strategic Answer: B

Last Answer : B.buyer readiness

Of the following stages of grieving as described by Kubler-Ross, which is the initial? a) Denial The stages include: denial, anger, bargaining, depression, and acceptance. b) Anger Anger is the second stage of the process. c) Bargaining Bargaining is the third stage of the process. d) Depression Depression is the fourth stage of the process.

Description : Of the following stages of grieving as described by Kubler-Ross, which is the initial? a) Denial The stages include: denial, anger, bargaining, depression, and acceptance. b) Anger Anger is the second ... is the third stage of the process. d) Depression Depression is the fourth stage of the process.

Last Answer : a) Denial The stages include: denial, anger, bargaining, depression, and acceptance.

Which of the following methods cannot be used to increase the bandwidth for cascaded RF amplifier stages? A) Wave traps in each stage B) Stagger tuning C) A shunt damping resistor across each tuned circuit D) Doubled tuned transformers with tighter coupling

Description : Which of the following methods cannot be used to increase the bandwidth for cascaded RF amplifier stages? A) Wave traps in each stage B) Stagger tuning C) A shunt damping resistor across each tuned circuit D) Doubled tuned transformers with tighter coupling

Last Answer : A) Wave traps in each stage

Which of the following combinations has no phase inversion of the signal? A) Two CE stages B) CE and CC stages C) Three CE stages D) CE stage and emitter follower.

Description : Which of the following combinations has no phase inversion of the signal? A) Two CE stages B) CE and CC stages C) Three CE stages D) CE stage and emitter follower.

Last Answer : A) Two CE stages

Ti is the time taken for the ith stage and there are n stages in the: a. Throughput b. Assembly line c. Both A and B d. None of these

Description : Ti is the time taken for the ith stage and there are n stages in the: a. Throughput b. Assembly line c. Both A and B d. None of these

Last Answer : b. Assembly line

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

___ Stages of financial includes financing development, expansion, buyout etc.(a) Early stage financing, b) later stage financing c) none) ___ Stages of financial includes financing development, expansion, buyout etc.(a) Early stage financing, b) later stage financing c) none)

Description : ___ Stages of financial includes financing development, expansion, buyout etc.(a) Early stage financing, b) later stage financing c) none)

Last Answer : b) later stage financing

VAT is imposed A. Directly on Consumers B. On final Stage of production C. On all stages from Production to final sale D. None of the above

Description : VAT is imposed A. Directly on Consumers B. On final Stage of production C. On all stages from Production to final sale D. None of the above

Last Answer : B. On final Stage of production

The following antimalarial drug is more active against pre-and exoerythrocytic stages of the malarial parasite than against the erythrocytic stage: A. Proguanil B. Primaquine C. Pyrimethamine D. Halofantrine

Description : The following antimalarial drug is more active against pre-and exoerythrocytic stages of the malarial parasite than against the erythrocytic stage: A. Proguanil B. Primaquine C. Pyrimethamine D. Halofantrine

Last Answer : B. Primaquine

VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Description : VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Last Answer : On all stages between production and sale

Depression Comes In Stages?

Description : Depression Comes In Stages?

Last Answer : Yes, depression comes in stages. Just like in the world of finance and markets, the world doesn't immediately fall into depression, it first has a recession and then drops into a depression, so ... pessimism. Therefore, we should stop it when it starts. We should not reach that stage of depression.

After Ling finished drafting a new project charter, she sent a copy of the charter to all key project parties including the project sponsor, senior management and key stakeholders, and scheduled a kick-off meeting with them. What will be the most important goal for Ling to complete the project charter? Select one: a. Make a professional looking project charter to impress the key project parties. b. Get confirmation from the key parties that they have read the charter. c. Invite the key parties for a nice lunch to establish a friendly relationship. d. Gather promises from the key project players. e. Obtain officially signed project charters from the key parties.

Description : After Ling finished drafting a new project charter, she sent a copy of the charter to all key project parties including the project sponsor, senior management and key stakeholders, and scheduled ... from the key project players. e. Obtain officially signed project charters from the key parties.

Last Answer : e. Obtain officially signed project charters from the key parties.

Pegging stage in groundnut comes after (a) 30 D.A.S. (b) 45 D.A.S. (c) 55 D.A.S. (d) 35 D.A.S.

Description : Pegging stage in groundnut comes after (a) 30 D.A.S. (b) 45 D.A.S. (c) 55 D.A.S. (d) 35 D.A.S.

Last Answer : (c) 55 D.A.S.

In Groundnut pegging stage comes after — DAS a. 35 b. 45 c. 55 d. 65

Description : In Groundnut pegging stage comes after — DAS a. 35 b. 45 c. 55 d. 65

Last Answer : c. 55

In Wheat Crown root initiation stage comes —- days after sowing a. 21 b. 11 c. 31 d. 41

Description : In Wheat Crown root initiation stage comes —- days after sowing a. 21 b. 11 c. 31 d. 41

Last Answer : a. 21

Does a canoe (in a canoe race) that is drafting off a lead canoe, create a drag on the lead canoe?

Description : Does a canoe (in a canoe race) that is drafting off a lead canoe, create a drag on the lead canoe?

Last Answer : Yes, the drafting of the lead canoe can significantly reduce the average energy expenditure required to maintain a certain speed & it slightly reduces the energy expenditure of the lead canoe. The amount of the drag is barely noticeable.

What does "UNC" stand for in a mechanical drawing / drafting context?

Description : What does "UNC" stand for in a mechanical drawing / drafting context?

Last Answer : It's a screw thread designation: Unified Coarse , which refers to the standard for thread sizes and shape used for machine screws in the US. The .250 is the nominal diameter of the screw that will fit ... , the hole is first drilled with a number 7 drill bit, then tapped using a 1/4-20 tap.

What is the best drawing/drafting table around?

Description : What is the best drawing/drafting table around?

Last Answer : answer:What sort of work are you doing? How large? Depending on what you're doing (architectural drafting, drawing comic books, charcoal sketching) the answer can be very different...

The term that is used for geometric modelling like solid modelling, wire frame modellingand drafting is known as a.software package b.operating system c.application software d.none of the mentioned

Description : The term that is used for geometric modelling like solid modelling, wire frame modellingand drafting is known as a.software package b.operating system c.application software d.none of the mentioned

Last Answer : a.software package

Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Description : Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Last Answer : b.CAD and CAM

In the following geometric modelling techniques which are not three-dimensionalmodelling? a.Wireframe modelling b.Drafting c.Surface modelling d.solid modelling

Description : In the following geometric modelling techniques which are not three-dimensionalmodelling? a.Wireframe modelling b.Drafting c.Surface modelling d.solid modelling

Last Answer : b.Drafting

A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Description : A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Last Answer : b.Computer Aided Design (CAD)

When was the drafting of Indian constitution completed and when it was implemented? -Civics 9th

Description : When was the drafting of Indian constitution completed and when it was implemented? -Civics 9th

Last Answer : The drafting of the Indian Constitution was completed on 26 November 1949, And It came in affect on 26 January 1950. Therefore we celebrate this day as Republic day {26 January}.

When was the drafting of Indian constitution completed and when it was implemented? -Civics 9th

Description : When was the drafting of Indian constitution completed and when it was implemented? -Civics 9th

Last Answer : The Constitution of India was adopted on 26 November, 1949 and the hon'ble members appended their signatures to it on 24 January, 1950.

Who was the Chairman of the Drafting Committee of the Indian Constitution? -General Knowledge

Description : Who was the Chairman of the Drafting Committee of the Indian Constitution? -General Knowledge

Last Answer : The answer is 'B. R.Ambedkar'

Who proposed the Preamble before the Drafting Committee of the Constitution ? -Do You Know?

Description : Who proposed the Preamble before the Drafting Committee of the Constitution ? -Do You Know?

Last Answer : The Preamble to the Indian Constitution is based on the Objectives Resolution', drafted and moved by Pandit Nehru before the Drafting Committee of the Constitution and adopted by the Constituent ... Constitutional Amendment Act (1976), which added three new words-socialist, secular and integrity.

What was the most profound influence on the drafting of the Indian Constitution? -Do You Know?

Description : What was the most profound influence on the drafting of the Indian Constitution? -Do You Know?

Last Answer : The Constitution of India has borrowed provisions from the Constitution of various other countries and most of the provisions had been taken from the Government of India Act, 1935. The provisions such as Federal scheme, Judiciary, Public Service Commissions etc were adopted from this Act.