Where might you find a cam actuated radial piston pump on a highway truck?

Where might you find a cam actuated radial piston pump on a highway truck?
by

1 Answer

Answer :

Fuel
by
selected by

Related questions

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Description : In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Last Answer : ANSWER : C

For the production of very high vacuum, a __________ pump is normally used. (A) Diffusion (B) Centrifugal (C) Jet ejector (D) Piston

Description : For the production of very high vacuum, a __________ pump is normally used. (A) Diffusion (B) Centrifugal (C) Jet ejector (D) Piston

Last Answer : (A) Diffusion

For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Description : For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Last Answer : (B) Volume swept by piston for one complete revolution and the pressure in the cylinder

Working of a __________ pump characterises mixed flow. (A) Turbine (B) Piston (C) Diaphragm (D) None of these

Description : Working of a __________ pump characterises mixed flow. (A) Turbine (B) Piston (C) Diaphragm (D) None of these

Last Answer : (A) Turbine

A mono pump is a __________ pump. (A) Centrifugal (B) Piston (C) Positive acting rotary (D) A group of vacuum

Description : A mono pump is a __________ pump. (A) Centrifugal (B) Piston (C) Positive acting rotary (D) A group of vacuum

Last Answer : (C) Positive acting rotary

Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Description : Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Last Answer : (A) Vane

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

__________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Description : __________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Last Answer : (C) Plunger

he pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Description : The pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Last Answer : Gear type

When you push down on the piston of a bicycle pump, the air is compressed into a smaller volume, which causes its temperature to: w) decrease x) increase y) stay the same

Description : When you push down on the piston of a bicycle pump, the air is compressed into a smaller volume, which causes its temperature to: w) decrease x) increase y) stay the same

Last Answer : ANSWER: X -- INCREASE

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

When the control handle is in the 'off' position, the solenoid actuated brake of the electric winch is _________. A. de-energized and the brake is released B. energized and the brake is released C. energized and the brake is set by a spring D. de-energized and the brake is set by a spring

Description : When the control handle is in the 'off' position, the solenoid actuated brake of the electric winch is _________. A. de-energized and the brake is released B. energized and the brake is released C. energized and the brake is set by a spring D. de-energized and the brake is set by a spring

Last Answer : Answer: D

The tie rod connects the front wheel spindle arms and is actuated by the steering shaft through a) chain link b) gear link c) tension link d) drag link

Description : The tie rod connects the front wheel spindle arms and is actuated by the steering shaft through a) chain link b) gear link c) tension link d) drag link

Last Answer : d) drag link

Describe the vacuum actuated grippers with example.

Description : Describe the vacuum actuated grippers with example.

Last Answer : Vacuum Grippers: The vacuum grippers also called vacuum cups or suction cups which uses vacuum as a gripping force. The lifting and holding is done by cups or vacuum surface driven by vacuum ... cup or Suction Cup, some vacuum grippers use a closedcell foam rubber layer for gripping application. 

What are grippers? Explain vacuum actuated gripper in brief.

Description : What are grippers? Explain vacuum actuated gripper in brief.

Last Answer : Grippers:- A gripper is a device which enables the holding of an object to be manipulated. a gripper enables holding, tightening, handling and releasing of an object. Vacuum Grippers:- The ... or Suction Cup, some vacuum grippers use a closed-cell foam rubber layer for gripping application. 

State the necessity of grippers. Explain vacuum actuated grippes in brief

Description : State the necessity of grippers. Explain vacuum actuated grippes in brief

Last Answer : Necessity [1] It enables holding of the object [2] It helps to release the object [3] It handles the object [4] Objects can be tightening Vacuum Actuated Grippes  The vacuum ... Vacuum cup or Suction Cup, some vacuum grippers use a closed-cell foam rubber layer for gripping application.

Explain pressure actuated switch with neat constructional diagram.

Description : Explain pressure actuated switch with neat constructional diagram.

Last Answer : Pressure actuated switch: A pressure actuated switch is a device designed to monitor a process pressure and provide an output when a set pressure (setpoint) is reached. A pressure actuated switch does this by ... range spring (e.g. if the nt is turned clockwise the trip pressure will be higher). 

Higher specific speed (200-500) of a centrifugal pump indicates that the pump is of __________ flow type. (A) Axial (B) Radial (C) Mixed (D) None of these

Description : Higher specific speed (200-500) of a centrifugal pump indicates that the pump is of __________ flow type. (A) Axial (B) Radial (C) Mixed (D) None of these

Last Answer : (A) Axial

A mixed flow centrifugal pump (A) Employs such an impeller, through which the flow is a combination of radial & axial flow (B) Mixes the two fluids before pumping them (C) Pumps the two fluids separately and then mixes them (D) Employs impellers in both the radial & axial directions

Description : A mixed flow centrifugal pump (A) Employs such an impeller, through which the flow is a combination of radial & axial flow (B) Mixes the two fluids before pumping them (C) Pumps the two fluids separately and then mixes them (D) Employs impellers in both the radial & axial directions

Last Answer : (A) Employs such an impeller, through which the flow is a combination of radial & axial flow

Pick up the correct statement from the following regarding radial flow centrifugal pumps: (A) These are provided with volute type or turbine type casings (B) In involute type of radial flow centrifugal pump, the impeller discharges into a gradually expanding spiral casing (C) The efficiency of turbine type of radial flow centrifugal pump, is always higher than that of volute type (D) All the above

Description : Pick up the correct statement from the following regarding radial flow centrifugal pumps:  (A) These are provided with volute type or turbine type casings  (B) In involute type of radial flow ... centrifugal pump, is always higher than that of  volute type  (D) All the above 

Last Answer : (D) All the above 

Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Description : Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Last Answer : (b) Difference in pressure between suction and delivery ends

At highway speeds do you feel safer with a transport truck in front of you, or behind you?

Description : At highway speeds do you feel safer with a transport truck in front of you, or behind you?

Last Answer : Behind me. If it is in front of me, the truck is blocking my view of what is ahead of me that I might miss such as a caution sign, or a road sign that I need to read. Also, he could lose ... other day there was a truck in front and beside me carrying machinery and a piece came off and hit my car.

Why do people slow down when their car is next to a truck on the highway?

Description : Why do people slow down when their car is next to a truck on the highway?

Last Answer : I think people freak out because when you’re driving next to a truck, it’s so large it feels like it is almost creeping into your lane. I think people become more cautious, slow down, and don’t drift to the right side of their lane.

What are truck weight stations for along the highway?

Description : What are truck weight stations for along the highway?

Last Answer : answer:Not an expert, but I believe that permits have to be issued for trucks moving across state lines (and maybe other things), and the permits are based on weight. Also, there is a maximum weight ... on the roads, the weigh stations are there to make sure that trucks do not go above the limit.

is an important machine used for farm machinisation. a) Tractor c) truck. b) Pump. d) Motor

Description : is an important machine used for farm machinisation. a) Tractor c) truck. b) Pump. d) Motor

Last Answer : Tractor 

The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Description : The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

___________ provide a convenient and effective method of selling small items to customers in remote areas that other wholesalers might find unprofitable to serve. A)Mail -order wholesalers B)Specialty -line wholesalers C)Cash -and -carry wholesalers D)Truck wholesalers E)Desk jobbers

Description : ___________ provide a convenient and effective method of selling small items to customers in remote areas that other wholesalers might find unprofitable to serve. A)Mail -order wholesalers B)Specialty -line wholesalers C)Cash -and -carry wholesalers D)Truck wholesalers E)Desk jobbers

Last Answer : A)Mail -order wholesalers

Mixed concrete cannot be shipped further than 25 miles because the concrete might harden in the truck. Antrim County Concrete Company is the only supplier of mixed concrete within a 30 mile radius. Antrim County Concrete Company is an example of which of the following competitive structures: A)Monopoly B)Oligopoly C)Monopolistic Competition D)Perfect Competition E)Monopsony

Description : Mixed concrete cannot be shipped further than 25 miles because the concrete might harden in the truck. Antrim County Concrete Company is the only supplier of mixed concrete within a 30 ... structures: A)Monopoly B)Oligopoly C)Monopolistic Competition D)Perfect Competition E)Monopsony

Last Answer : A)Monopoly

Engineering Piston Question?

Description : Engineering Piston Question?

Last Answer : I don’t believe you have enough information to figure this out. Normally those pistons provide damping that slows the action down. A gas charge by itself would make the piston move very rapidly so damping must be added. The damping properties need to be known.

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

What is the speed of the piston in the cylinder of a petrol engine ?

Description : What is the speed of the piston in the cylinder of a petrol engine ?

Last Answer : The speed of the piston in the cylinder of a petrol engine is also the speed of the alternator.

City 100 Of Ring , piston, Timing Chain Change To do How much? Money Need it ?

Last Answer : How much ? Money It takes That Specified By To say Possible No. Of parts Quality And Displacement Different Price To be Can However Yours Talk According to All in all Approx Max 2,000 - 3,000 _ _ _ _ Money To take Can

Where to buy an electrically operated piston?

Description : Hello, where can I buy an electric piston?

Last Answer : Wouldn't you like to get a little divorced? Few people will understand what you're doing ...

Can I replace the piston rings?

Description : Is it very difficult to replace the piston rings at the roof? Mustang 50.

Last Answer : I also changed them for the first time and I did it. The worst was the loosening of the screws on his head.

New piston rings for java 50.

Description : I replaced the piston 50 Mustang piston rings and now the head is overheating terribly. I just drive for 2 minutes and it's overheated that I'm smoking and the bike can't start. After cooling, it ... and rides again for 2 minutes before overheating. He's been doing it since I put new piston rings.

Last Answer : How much have you driven since the exchange? And - you just changed the rings - or the whole set (+ cut)? Anyway - now you are running the engine, so you should lubricate more (approx. 1:20), do ... anti-knock gap, the tightness of the cylinder head ... And don't forget to clean the exhaust. ;-)

buick 2005 lacross / how to compress rear calliper piston when changing brakes

Description : buick 2005 lacross / how to compress rear calliper piston when changing brakes

Last Answer : Need Answer

A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single stage irreversible process. If the

Description : A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single stage irreversible process. If the

Last Answer : A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single ... (0)` D. `DeltaU = -3P_(0)V_(0)`

The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing pressure P is variable, is given b

Description : The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing pressure P is variable, is given b

Last Answer : The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing ... 0 C. `W = -P Delta V` D. None

A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Description : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Last Answer : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37. ... J` D. `q= +208 J, w=+208 J`

Show digramatically the changes in the position of piston, if a. Pressure is increased from 1.0 bar to 2.0 bar at constant temperature. 

Description : Show digramatically the changes in the position of piston, if a. Pressure is increased from 1.0 bar to 2.0 bar at constant temperature. 

Last Answer : Consider a sample of a gas in a cylinder with a movable piston. Show digramatically the changes in ... pressure is decreased from 4 bar to 3 bar.

If the output piston is a car hoist was replaced by a piston of twice the area what would happen to the output force?

Description : If the output piston is a car hoist was replaced by a piston of twice the area what would happen to the output force?

Last Answer : What is the answer ?

If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?

Description : If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?

Last Answer : -1

The domestic refrigerator uses following type of compressor (a) centrifugal (b) axial (c) miniature sealed unit (d) piston type reciprocating

Description : The domestic refrigerator uses following type of compressor (a) centrifugal (b) axial (c) miniature sealed unit (d) piston type reciprocating

Last Answer : Ans: d

The energy of expanding gas is transferred by piston to connecting rod through a. Crank pin b. Gudgeon pin c. Bearing d. Crankcase (Ans:b)

Description : The energy of expanding gas is transferred by piston to connecting rod through a. Crank pin b. Gudgeon pin c. Bearing d. Crankcase (Ans:b)

Last Answer : Which of the following is not used in four stroke compression-ignition (CI) engines? a. Fuel pump b. Spark plug c. Fuel injector d. Inlet and outlet Valves (Ans:b)

Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm

Description : Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm

Last Answer : ANSWER c. 2 x stroke x rpm

Linear motion of the piston in a heat engine is converted into circular motion by

Description : Linear motion of the piston in a heat engine is converted into circular motion by

Last Answer : Crankshaft.

Forward movement of a piston in a steam engine is called

Description : Forward movement of a piston in a steam engine is called

Last Answer : expansion stroke.

In the expansion stroke of a petrol engine, the piston is pushed with a great stroke. Why?

Description : In the expansion stroke of a petrol engine, the piston is pushed with a great stroke. Why?

Last Answer : When the petrol-air mixture is ignited, carbon dioxide, carbon monoxide and water vapour expands suddenly. This exerts a great force on the piston.

Give reason: Steam exerts great pressure on the walls of the piston during expansion stroke.

Description : Give reason: Steam exerts great pressure on the walls of the piston during expansion stroke.

Last Answer : As steam occupies much larger volume than the same amount of water, it exerts great pressure on the walls of the piston.