A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single stage irreversible process. If the

A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single stage irreversible process. If the
by

1 Answer

Answer :

A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single ... (0)` D. `DeltaU = -3P_(0)V_(0)`
by

Related questions

Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Description : Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Last Answer : (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion)

When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Description : When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Last Answer : (A) Reversible

PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Description : PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Last Answer : C) Reversible and adiabatic

Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Description : Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Last Answer : (B) An isometric process is a constant pressure process

Pick out the wrong statement. (A) The net change in entropy in any reversible cycle is always zero (B) The entropy of the system as a whole in an irreversible process increases (C) The entropy of the universe tends to a maximum (D) The entropy of a substance does not remain constant during a reversible adiabatic change

Description : Pick out the wrong statement. (A) The net change in entropy in any reversible cycle is always zero (B) The entropy of the system as a whole in an irreversible process increases (C) The ... to a maximum (D) The entropy of a substance does not remain constant during a reversible adiabatic change

Last Answer : (D) The entropy of a substance does not remain constant during a reversible adiabatic change

The term “isentropic process” used in thermodynamics implies what?  A. Reversible adiabatic process  B. Externally reversible, adiabatic process  C. Internally reversible, adiabatic process  D. Irreversible adiabatic process

Description : The term “isentropic process” used in thermodynamics implies what?  A. Reversible adiabatic process  B. Externally reversible, adiabatic process  C. Internally reversible, adiabatic process  D. Irreversible adiabatic process

Last Answer : Internally reversible, adiabatic process

How does an adiabatic process compare to an isentropic process?  A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero  B. Both heat transfer = 0; isentropic: reversible  C. Adiabatic heat transfer = 0; isentropic: heat transfer is not equal to zero  D. Both heat transfer is not equal to zero; isentropic: irreversible

Description : How does an adiabatic process compare to an isentropic process?  A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero  B. Both heat transfer = 0; isentropic: reversible  ... is not equal to zero  D. Both heat transfer is not equal to zero; isentropic: irreversible

Last Answer : Both heat transfer = 0; isentropic: reversible

Which of the following processes is irreversible process  (a) isothermal  (b) adiabatic  (c) throttling  (d) all of the above  (e) none of the above.

Description : Which of the following processes is irreversible process  (a) isothermal  (b) adiabatic  (c) throttling  (d) all of the above  (e) none of the above.

Last Answer : Answer : c

The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Description : The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Last Answer : Answer : b

6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Description : 6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (C) Merely compressing it beyond critical pressure

In a single stage reciprocating air compressor, the work done on air to compressor is from suction pressure to delivery pressure will be minimum when the compression is A. Isothermal process B. Adiabatic process C. Polytropic process D. Constant pressure process.

Description : In a single stage reciprocating air compressor, the work done on air to compressor is from suction pressure to delivery pressure will be minimum when the compression is A. Isothermal process B. Adiabatic process C. Polytropic process D. Constant pressure process.

Last Answer : ANSWER : A

An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum along the length of the reactor (C) Goes through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Description : An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum ... through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Last Answer : (A) Is maximum at the inlet of the reactor

Entropy of a substance remains constant during a/an __________ change. (A) Reversible isothermal (B) Irreversible isothermal (C) Reversible adiabatic (D) None of these

Description : Entropy of a substance remains constant during a/an __________ change. (A) Reversible isothermal (B) Irreversible isothermal (C) Reversible adiabatic (D) None of these

Last Answer : (C) Reversible adiabatic

Generation of heat by friction is an example of a/an __________ change. (A) Isothermal (B) Irreversible (C) Adiabatic (D) Reversible

Description : Generation of heat by friction is an example of a/an __________ change. (A) Isothermal (B) Irreversible (C) Adiabatic (D) Reversible

Last Answer : (B) Irreversible

Stirling and Ericsson cycles are  (a) reversible cycles  (b) irreversible cycles  (c) quasi-static cycles  (d) semi-reversible cycles  (e) adiabatic irreversible cycles.

Description : Stirling and Ericsson cycles are  (a) reversible cycles  (b) irreversible cycles  (c) quasi-static cycles  (d) semi-reversible cycles  (e) adiabatic irreversible cycles.

Last Answer : Answer : a

Carnot cycle is  (a) a reversible cycle (ft) an irreversible cycle  (c) a semi-reversible cycle  (d) a quasi static cycle  (e) an adiabatic irreversible cycle.

Description : Carnot cycle is  (a) a reversible cycle (ft) an irreversible cycle  (c) a semi-reversible cycle  (d) a quasi static cycle  (e) an adiabatic irreversible cycle.

Last Answer : Answer : a

You are driving down the interstate at 75 mph and the steering wheel suddently falls in your lap. whats your next move?

Description : You are driving down the interstate at 75 mph and the steering wheel suddently falls in your lap. whats your next move?

Last Answer : Put on the brakes.

What can I do if my yahoo email account has suddently stopped working?

Description : What can I do if my yahoo email account has suddently stopped working?

Last Answer : If you don't want to speak to someone about the account then the best thing to do would just be to make a new email address/account and just email all your friends telling them your new address.

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Which stage of shock is best described as that stage when the mechanisms that regulate blood pressure fail to sustain a systolic pressure above 90 mm Hg? a) Progressive In the progressive stage of shock, the mechanisms that regulate blood pressure can no longer compensate, and the mean arterial pressure falls below normal limits. b) Refractory The refractory or irreversible stage of shock represents the point at which organ damage is so severe that the patient does not respond to treatment and cannot survive.

Description : Which stage of shock is best described as that stage when the mechanisms that regulate blood pressure fail to sustain a systolic pressure above 90 mm Hg? a) Progressive In the progressive stage of ... which organ damage is so severe that the patient does not respond to treatment and cannot survive.

Last Answer : a) Progressive In the progressive stage of shock, the mechanisms that regulate blood pressure can no longer compensate, and the mean arterial pressure falls below normal limits.

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

__________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Description : __________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Last Answer : (C) Plunger

In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Description : In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Last Answer : ans 1

Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the vapor pressure of "X" be when the volume above the liquid is 100 ml and the temperature 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Last Answer : ANSWER: Y -- 120 TORR

The pressure inside a piston cylinder is a variable of a) Radius b) Plane angle c) Z plane distance d) Constant, not a variable

Description : The pressure inside a piston cylinder is a variable of a) Radius b) Plane angle c) Z plane distance d) Constant, not a variable

Last Answer : c) Z plane distance

In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Description : In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Last Answer : no-transition

Which of the following statements are correct concerning delocalized electrons? (a) Electrons do not belong to a single atom. (b) Electrons are not confined to a bond between two atoms (c) Electrons are shared by three or more atoms.(d) (a), (b) and (c)

Description : Which of the following statements are correct concerning delocalized electrons? (a) Electrons do not belong to a single atom. (b) Electrons are not confined to a bond between two atoms (c) Electrons are shared by three or more atoms. (d) (a), (b) and (c)

Last Answer : (d) (a), (b) and (c)

Which one of the following is correct? A. In a multistage compressor adiabatic efficiency is less than stage efficiency B. In a multistage turbine adiabatic efficiency is less than the stage efficiency C. Preheat factor for a multistage compressor is greater than one D. Preheat factor does not affect the multistage compressor performance

Description : Which one of the following is correct? A. In a multistage compressor adiabatic efficiency is less than stage efficiency B. In a multistage turbine adiabatic efficiency is less than the stage ... compressor is greater than one D. Preheat factor does not affect the multistage compressor performance

Last Answer : ANSWER : A

Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Description : Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Last Answer : (B) Wet-bulb

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

A liquid decomposes by irreversible first order kinetics and the half life period of this reaction is 8 minutes. The time required for 75% conversion of the liquid will be __________ minutes. (A) 4 (B) 8 (C) 12 (D) 16

Description : A liquid decomposes by irreversible first order kinetics and the half life period of this reaction is 8 minutes. The time required for 75% conversion of the liquid will be __________ minutes. (A) 4 (B) 8 (C) 12 (D) 16

Last Answer : (D) 16

Half life period of decomposition of a liquid 'A' by irreversible first order reaction is 12 minutes. The time required for 75% conversion of 'A' is __________ minutes. (A) 18 (B) 24 (C) 6 (D) 12

Description : Half life period of decomposition of a liquid 'A' by irreversible first order reaction is 12 minutes. The time required for 75% conversion of 'A' is __________ minutes. (A) 18 (B) 24 (C) 6 (D) 12

Last Answer : (B) 24

An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Description : An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Last Answer : (B) Be more in PFR than in CSTR

A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b

The exclusive function of iron in the body is confined to the process of (A) Muscular contraction (B) Nerve excitation (C) Cellular respiration (D) Blood coagulation

Description : The exclusive function of iron in the body is confined to the process of (A) Muscular contraction (B) Nerve excitation (C) Cellular respiration (D) Blood coagulation

Last Answer : Answer : C

The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Description : The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Last Answer : (C) Spray chamber

A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the irreversible and reversible processes respectively) (A) Δ S1is always < Δ SR (B) Δ S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR

Description : A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the ... S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR

Last Answer : (C) Δ S1is always > Δ SR

State the materials used for piston with justification.

Description : State the materials used for piston with justification.

Last Answer : Material used for Piston: Cast Iron, Cast Steel, Forged Steel, Cast Aluminum Alloys and Forged Aluminum Alloy. Cast Aluminum Alloys is the most commonly used material for piston because; 1. Cast ... . 4. It allows to utilize more of the force produced by combustion to power the application.

State the functions and materials of following engine components: (i) Piston (ii) Connecting rod (iii)Crank shaft (iv)Exhaust manifold

Description : State the functions and materials of following engine components: (i) Piston (ii) Connecting rod (iii)Crank shaft (iv)Exhaust manifold

Last Answer : Engine components Material Functions Piston Cat aluminum alloy To transmit the force of explosion to the crankshaft. To form seal so that the high pressure gases in ... atmosphere through the exhaust pipe after combustion stroke is completed. To keep back pressure minimum.

Assertion :- `Q_("Surr")` is zero for adiabatic process Reason :- Final state of the system remains unchanged in adiabatic process.

Description : Assertion :- `Q_("Surr")` is zero for adiabatic process Reason :- Final state of the system remains unchanged in adiabatic process.

Last Answer : Assertion :- `Q_("Surr")` is zero for adiabatic process Reason :- Final state of the system ... False. D. If both Assertion & Reason are false.

Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric

Description : Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric

Last Answer : (A) Isothermal

Work done in an adiabatic process between two states depends on the (A) Rate of heat transmission (B) Initial state only (C) End states only (D) None of these

Description : Work done in an adiabatic process between two states depends on the (A) Rate of heat transmission (B) Initial state only (C) End states only (D) None of these

Last Answer : C) End states only

What is the irreversible process ?

Description : What is the irreversible process ?

Last Answer : The process that cannot be reversed, that is, the results of heat and work are not equal and opposite in each step of reversal and reversal , is called irreversible process.

In a spontaneous irreversible process the total entropy of the system and surroundings

Description : In a spontaneous irreversible process the total entropy of the system and surroundings

Last Answer : In a spontaneous irreversible process the total entropy of the system and surroundings A. Remains constant B. Increases C. Decreases D. Zero

Transamination is a (A) Irreversible process(B) Reversible process (C) Both (A) and (B) (D) None of these

Description : Transamination is a (A) Irreversible process(B) Reversible process (C) Both (A) and (B) (D) None of these

Last Answer : Answer : B

Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Description : Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Last Answer : (B) Exothermic