What will a bad throttle positoning sensor do in a 95 jeep grand Cherokee?

What will a bad throttle positoning sensor do in a 95 jeep grand Cherokee?
by

1 Answer

Answer :

Feel Free to Answer
by

Related questions

What are some SUVs comparable to the Jeep Grand Cherokee but more affordable?

Description : What are some SUVs comparable to the Jeep Grand Cherokee but more affordable?

Last Answer : Here’s a link for some ideas. Welcome to fluther. It didn’t work, let me try again. www.syracuse.com/poststandard Best I could do. They have a good auto section. Go into it and search the used car guide. Sorry I couldn’t do better.

What is the required front brake thickness on a 1996 Jeep Grand Cherokee?

Description : What is the required front brake thickness on a 1996 Jeep Grand Cherokee?

Last Answer : Need answer

What is the transfer case fluid capacity on a 1996 Jeep Grand Cherokee?

Description : What is the transfer case fluid capacity on a 1996 Jeep Grand Cherokee?

Last Answer : The transfer case holds almost two quarts.

Where is the number 1 plug on a 2004 Jeep Grand Cherokee 6 cylinder?

Description : Where is the number 1 plug on a 2004 Jeep Grand Cherokee 6 cylinder?

Last Answer : Number one spark plug is closest to the radiator.

Where is the 2011 Jeep Grand Cherokee Cabin Filter?

Description : Where is the 2011 Jeep Grand Cherokee Cabin Filter?

Last Answer : The cabin filter is accessed by opening the glove box door,removing the owners manual storage shelf, and then opening thefilter access door.

Can a 2005 jeep grand Cherokee have a 4.0 v6?

Description : Can a 2005 jeep grand Cherokee have a 4.0 v6?

Last Answer : No. The V6 in a 2005 Jeep Grand Cherokee was a 3.7L.

How do i change the front side light on a jeep grand Cherokee 2003?

Description : How do i change the front side light on a jeep grand Cherokee 2003?

Last Answer : Feel Free to Answer

How do you remove the rear headrests on a 2001 Jeep Grand Cherokee Laredo?

Description : How do you remove the rear headrests on a 2001 Jeep Grand Cherokee Laredo?

Last Answer : Feel Free to Answer

What can I do to increase my mileage on a 2001 Jeep grand Cherokee 4.7L V8?

Description : What can I do to increase my mileage on a 2001 Jeep grand Cherokee 4.7L V8?

Last Answer : What is the answer ?

How do you replace a headlight bulb in a 2015 Jeep Grand Cherokee?

Description : How do you replace a headlight bulb in a 2015 Jeep Grand Cherokee?

Last Answer : Need answer

How much psi should the wheel of a 2009 Jeep Grand Cherokee have?

Description : How much psi should the wheel of a 2009 Jeep Grand Cherokee have?

Last Answer : Need answer

wrho can repair my window motor in my 2002 jeep grand cherokee for a affordable?

Description : wrho can repair my window motor in my 2002 jeep grand cherokee for a affordable?

Last Answer : I would try your local full auto repair shop that will offer you a set installation price if you purchase the part yourself.

Where is the cabin air filter located in a 1998 Jeep Grand Cherokee ltd?

Description : Where is the cabin air filter located in a 1998 Jeep Grand Cherokee ltd?

Last Answer : A 1998 Jeep Grand Cherokee does not have a cabin filter.

I need someone to tell me what is the name of a car part in a Jeep Cherokee.

Description : I need someone to tell me what is the name of a car part in a Jeep Cherokee.

Last Answer : Go to the dealer and get the right part !

Mechanics: What is so special about my Jeep Cherokee SUV that only the dealer has the equipment to service it?

Description : Mechanics: What is so special about my Jeep Cherokee SUV that only the dealer has the equipment to service it?

Last Answer : Both of my Ford products must have the all-wheel drive system repair work done at a limited number of Ford dealers, because of equipment and special training. IT maybe the Fiat/Chrysler doing the same thing. ... be back again for the same problem in three months and they don't want to deal with it.

Gutless low power Jeep Cherokee Sport with fuel injected straight 6 what is up with that?

Description : Gutless low power Jeep Cherokee Sport with fuel injected straight 6 what is up with that?

Last Answer : You need to take it to a garage with diagnostic equipment. It may the the black box for the fuel system, it may be the O2 sensor, it may be the timing….... You can throw many dollars at it without fixing it. Find what is wrong/broken and replace it. Get it to a garage.

What are your thoughts about spending $1200 on repairs to a 1994 Jeep Cherokee with 158000 miles?

Description : What are your thoughts about spending $1200 on repairs to a 1994 Jeep Cherokee with 158000 miles?

Last Answer : answer:From my experience, $1200 isn't that much. I would say that if you think it's going to give you a few more years, do the repairs. You definitely won't find a quality used vehicle for that price ... look at it: you're buying a fixed up 1994 Jeep Cherokee for $1200. That's a pretty decent deal.

What are your thoughts on a 1993 Jeep Cherokee, 160,000 miles?

Description : What are your thoughts on a 1993 Jeep Cherokee, 160,000 miles?

Last Answer : I love jeeps. I’ve always wanted one. But I hear they’re a pain to own and are always breaking down. But for that price I don’t think you’re gonna get a car that is absolutely perfect, and 160,000 miles isn’t bad for how old the car is. I vote yay.

What is the life expectancy of my 1998 Jeep Cherokee?

Description : What is the life expectancy of my 1998 Jeep Cherokee?

Last Answer : If it ain’t broke don’t fix it. That’s a lot of miles, but it sounds like you take good care of it. I wouldn’t go new car shopping just yet.

Where can I find a .PDF manual to a 1996 Jeep Cherokee?

Description : Where can I find a .PDF manual to a 1996 Jeep Cherokee?

Last Answer : That's gonna be a hard one to do. It's not a sports or collectors car so you won't have any luck with a fan website probably. Your best bet imo would be to e-mail someone at jeep. OR, you ... those 3rd party manuals (but again you'd probably have to get that offline as it's not a very common car).

2001 Jeep Cherokee running rough and ticking after top end rebuild

Description : 2001 Jeep Cherokee running rough and ticking after top end rebuild

Last Answer : Need Answer

replacing door locks on a 89 jeep cherokee

Description : replacing door locks on a 89 jeep cherokee

Last Answer : Need Answer

Can you show a diagram of how a heater works 2000 jeep Cherokee?

Description : Can you show a diagram of how a heater works 2000 jeep Cherokee?

Last Answer : Need answer

How do you flushing a heater core on a 2000 jeep Cherokee?

Description : How do you flushing a heater core on a 2000 jeep Cherokee?

Last Answer : Need answer

How many coils does a jeep Cherokee have?

Description : How many coils does a jeep Cherokee have?

Last Answer : Need answer

What is fan belt routing Jeep Cherokee?

Description : What is fan belt routing Jeep Cherokee?

Last Answer : First we will need the model year, what size engine and if ithas AC or not.

Where can I find used tires in Las Vegas for a jeep cherokee?

Description : Where can I find used tires in Las Vegas for a jeep cherokee?

Last Answer : I would check with A+ Tires and batteries off of 6th and Central st. According to Google they have the best prices.

The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: d Explanation: The knock sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded while the camshaft position sensor, senses ... the engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: c Explanation: The camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection whereas the throttle position sensor, senses the movement of the throttle ... engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

The ___________ sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The ___________ sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: b Explanation: The manifold pressure sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load and the camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection.

The _____________ sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: a Explanation: The throttle position sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration while the manifold ... the camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection.

How much for new HVAC on a Grand Cherokee?

Description : How much for new HVAC on a Grand Cherokee?

Last Answer : Compressor replacement and labor could run $1500 to $2000. Not really a DIY project because it needs test equipment.

What transfer cases work in a 1987-95 Jeep Wrangler?

Description : What transfer cases work in a 1987-95 Jeep Wrangler?

Last Answer : answer:Kind of a crumby site but there is a lot of good info if you are willing to look around a bit and figure out the navigation... http://www.jeeptech.com/ Should be able to start getting some answers there!

Is there a mass air flow sensor on a 2002 Jeep Wrangler and if so where is it?

Description : Is there a mass air flow sensor on a 2002 Jeep Wrangler and if so where is it?

Last Answer : A 2002 Jeep Wrangler does not have a mass airflow sensor.

Where is 02 sensor located 2006 jeep liberty 3.7?

Description : Where is 02 sensor located 2006 jeep liberty 3.7?

Last Answer : The 2006 Liberty with a 3.7L has four oxygen sensors. One beforeand one after each catalytic converter.

When I close the throttle on my car, and allow speed to bleed off, is this a Delta-V scalar?

Description : When I close the throttle on my car, and allow speed to bleed off, is this a Delta-V scalar?

Last Answer : answer:So long as you travel in a straight line. As you probably know, turning is a change in velocity ( ΔV ) even if speed remains constant. However, if direction does not change then any ΔV ... and direction; a scalar and a vector, and we've alread declared the vector component to be constant.

the throttle stops working while driving

Description : audi A3 8l 1.8 t 110kw Hello, I started to have an unpleasant anomaly on the car. When driving, it happens to me (completely irregularly sometimes in 15 minutes of driving, sometimes in 4 hours) ... never happened to me that the car always wants the same scenario is repeated . Thank you in advance

Last Answer : look here you could have the same https://www.club-opel.cz/viewtopic.php?f=150&t=276

how to clean electronic throttle body on 2008 dodge caliber

Description : how to clean electronic throttle body on 2008 dodge caliber

Last Answer : Need Answer

assemble the throttle for a mercury optimax

Description : assemble the throttle for a mercury optimax

Last Answer : Need Answer

Is the throttle on the right side or the left side of the motorcycle?

Description : Is the throttle on the right side or the left side of the motorcycle?

Last Answer : The throttle is on the right handlebar grip. Your brakes are the levers on each handlebar, the front brake is on the right and the rear brake is on the left.

Where is the throttle body spacer located?

Description : Where is the throttle body spacer located?

Last Answer : The throttle body spacer is a small piece of metal that is attached the back of a throttle body. It is suppose to change the airflow which can potentially give you more horsepower and better fuel economy.

where can I purchase a body throttle spacer?

Description : where can I purchase a body throttle spacer?

Last Answer : You can buy a body throttle spacer on the internet, at your dealership or in a garage, all depends on your preferences. To be sure you get one that you will be satisfied with, you could ... the internet before making your selection, that way, you'll make the most informed decisions when you buy.

What are the steps in resetting security lock out mode and can effect fuel reaching the throttle body?

Description : What are the steps in resetting security lock out mode and can effect fuel reaching the throttle body?

Last Answer : Just like The problem with this system is that at times it decreases throttle. For example, ECM reset does not clear the historical faults records.Step 1 Open the fuse panel in the driver-side foot well ... The ECU just resets itself back into the learning mode, I make a point to reset the ECU

The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Description : The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Last Answer : Ans: d

In vapour compression cycle the condition of refrigerant is superheated vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) beforeentering the expansion valve

Description : In vapour compression cycle the condition of refrigerant is superheated vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) beforeentering the expansion valve

Last Answer : Ans: b

In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Last Answer : Ans: d

In vapour compression cycle, the condition of refrigerant is very wet vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is very wet vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Last Answer : Ans: c

In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Last Answer : Ans: a

In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Description : In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Last Answer : Answer: d Explanation: None.

D-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Description : D-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Last Answer : Answer: b Explanation: D-MPFI system uses direct injection and L-MPFI system uses port injection while multipoint fuel injection system uses port injection and throttle body injection.