The _____________ sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration. a) throttle position b) manifold pressure c) camshaft position d) knock

The _____________ sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration. a) throttle position b) manifold pressure c) camshaft position d) knock
by

1 Answer

Answer :

Answer: a Explanation: The throttle position sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration while the manifold pressure sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load and the camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection.
by
selected by

Related questions

The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: c Explanation: The camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection whereas the throttle position sensor, senses the movement of the throttle ... engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

The ___________ sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The ___________ sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: b Explanation: The manifold pressure sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load and the camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection.

The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: d Explanation: The knock sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded while the camshaft position sensor, senses ... the engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

The _____________ sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : The _____________ sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: a Explanation: The engine temperature sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting while the ... gas senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio.

The _____________ sensor, monitors mass or volume of air flowing into the intake manifold for adjusting the quantity of fuel. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : The _____________ sensor, monitors mass or volume of air flowing into the intake manifold for adjusting the quantity of fuel. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: c Explanation: The air flow sensor, monitors mass or volume of air flowing into the intake manifold for adjusting the quantity of fuel while exhaust gas senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio.

The _____________ sensor, checks the temperature of the ambient air entering the engine for fine tuning the mixture strength. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : The _____________ sensor, checks the temperature of the ambient air entering the engine for fine tuning the mixture strength. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: d Explanation: The air inlet temperature sensor, checks the temperature of the ambient air entering the engine for fine tuning the mixture strength whereas the engine temperature sensor senses the ... gas senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio.

D-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Description : D-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Last Answer : Answer: b Explanation: D-MPFI system uses direct injection and L-MPFI system uses port injection while multipoint fuel injection system uses port injection and throttle body injection.

L-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Description : L-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Last Answer : Answer: a Explanation: L-MPFI system uses port injection while multi-point fuel injection system uses port injection and throttle body injection while D-MPFI system uses direct injection.

_____________ senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio. a) Engine temperature b) Exhaust gas c) Air flow d) Air inlet temperature

Description : _____________ senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio. a) Engine temperature b) Exhaust gas c) Air flow d) Air inlet temperature

Last Answer : Answer: b Explanation: Exhaust gas senor senses the amount of oxygen in the engine exhaust and calculates airfuel ratio while engine temperature sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting.

In _____________ sensor, output voltage changes in proportion to air-fuel ratio. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : In _____________ sensor, output voltage changes in proportion to air-fuel ratio. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: b Explanation: Only in exhaust gas sensor, output voltage changes in proportion to air-fuel ratio.

The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Description : The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Last Answer : Ans: d

The tendency of a diesel engine to knock increases if a. engine speed is increased b. engine power is increased c. cetane number of the fuel is increased d. compression ratio is increased

Description : The tendency of a diesel engine to knock increases if a. engine speed is increased b. engine power is increased c. cetane number of the fuel is increased d. compression ratio is increased

Last Answer : ANSWER d. compression ratio is increased

Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Description : Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Last Answer : ANSWER c. engine cylinder

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

The knock in diesel engine occurs due to A. instantaneous and rapid burning of the first part of the charge B. instantaneous auto ignition of the last part of the charge C. delayed burning of the last part of the charge D. reduction of delay period

Description : The knock in diesel engine occurs due to A. instantaneous and rapid burning of the first part of the charge B. instantaneous auto ignition of the last part of the charge C. delayed burning of the last part of the charge D. reduction of delay period

Last Answer : ANSWER : A

Reference fuels for knock rating of SI engine fuels would include (a) Iso octane alpha methyl naphthalene (b) Normal octance and aniline (c) Isooctance and n octane (d) N heptane and iso octane

Description : Reference fuels for knock rating of SI engine fuels would include (a) Iso octane alpha methyl naphthalene (b) Normal octance and aniline (c) Isooctance and n octane (d) N heptane and iso octane

Last Answer : Ans : d

The tendency of a petrol engine to knock increases by a. supercharging b. scavenging c. increasing the engine horse power d. reducing the spark advance

Description : The tendency of a petrol engine to knock increases by a. supercharging b. scavenging c. increasing the engine horse power d. reducing the spark advance

Last Answer : ANSWER a. supercharging

Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Description : Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Last Answer : ans c

In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Last Answer : Ans: d

A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is the partial pressure of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Last Answer : 84.6

In vapour compression cycle the condition of refrigerant is superheated vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) beforeentering the expansion valve

Description : In vapour compression cycle the condition of refrigerant is superheated vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) beforeentering the expansion valve

Last Answer : Ans: b

In vapour compression cycle, the condition of refrigerant is very wet vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is very wet vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Last Answer : Ans: c

In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Last Answer : Ans: a

In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Description : In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Last Answer : Answer: d Explanation: None.

Name the sensors which are placed at intake manifold ,throttle valve, water jacket and exhaust manifold.

Description : Name the sensors which are placed at intake manifold ,throttle valve, water jacket and exhaust manifold. 

Last Answer : Sensors: Intake manifolds:- Mass air flow sensor (MAF), Manifold absolute pressure sensor (MAP) Throttle valve:- Throttle position sensor (TPS) Water jacket:- Engine temperature sensor or coolant temperature sensor Exhaust manifolds: - Exhaust gas temperature sensor, Oxygen sensor (O2)

Surging basically implies A. Unsteady, periodic and reversed flow B. Forward motion of air at a speed above sonic velocity C. The surging action due to the blast of air produced in a compressor D. Forward movement of aircraft

Description : Surging basically implies A. Unsteady, periodic and reversed flow B. Forward motion of air at a speed above sonic velocity C. The surging action due to the blast of air produced in a compressor D. Forward movement of aircraft

Last Answer : ANSWER : A

In _____________ injection system only one pump is sufficient for multi-cylinder engine. a) air b) mechanical c) compression fuel d) common rail

Description : In _____________ injection system only one pump is sufficient for multi-cylinder engine. a) air b) mechanical c) compression fuel d) common rail

Last Answer : Answer: d Explanation: None.

Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat energy of gasoline/litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Description : Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat ... /litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Last Answer : Answer: a Explanation: Anti-knock characteristics of alcohol is good.

Anti-knock for compression ignition engines is a) napthene b) tetra ethyl lead c) amyl nitrate d) hexadecane

Description : Anti-knock for compression ignition engines is a) napthene b) tetra ethyl lead c) amyl nitrate d) hexadecane

Last Answer : Answer: c Explanation: Amyl nitrate is the anti-knock for compression ignition engines.

Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Description : Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Last Answer : ANSWER : B

Velocity of flame propagation in SI engine is maximum for a fuel air mixture which is (a) 10% richer than stoichiometric (b) Equal to stoichiometric (c) More than 10% richer than stoichiometric (d) 10% leaner than stoichiometric

Description : Velocity of flame propagation in SI engine is maximum for a fuel air mixture which is (a) 10% richer than stoichiometric (b) Equal to stoichiometric (c) More than 10% richer than stoichiometric (d) 10% leaner than stoichiometric

Last Answer : Ans :a

A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc

Description : A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc

Last Answer : Ans : c

Thermal efficiency of an internal combustion engine on weak mixture is a. higher b. lower c. unaffected d. unpredictable

Description : Thermal efficiency of an internal combustion engine on weak mixture is a. higher b. lower c. unaffected d. unpredictable

Last Answer : ANSWER a. higher

Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Description : Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Last Answer : ANSWER b. compression ignition engine

For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Description : For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Last Answer : ANSWER (B) for both idling and peak power conditions

An engine indicator is used to determine the following a. Speed. b. Temperature. c. Volume of cylinder. d. Mean effective pressure and Indicated horse power.

Description : An engine indicator is used to determine the following a. Speed. b. Temperature. c. Volume of cylinder. d. Mean effective pressure and Indicated horse power.

Last Answer : ANSWER d. Mean effective pressure and Indicated horse power.

Will a bad camshaft sensor keep fuel pump from coming on?

Description : Will a bad camshaft sensor keep fuel pump from coming on?

Last Answer : Feel Free to Answer

Where is the camshaft sensor on a 97 Mitsubishi diamante at?

Description : Where is the camshaft sensor on a 97 Mitsubishi diamante at?

Last Answer : What is the answer ?

In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Description : In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Last Answer : ANSWER : C

In a centrifugal compressor, an increase in speed at a given pressure ratio causes A. Increase in flow B. Decrease in flow C. Increase in efficiency D. Increase in flow and decrease in efficiency

Description : In a centrifugal compressor, an increase in speed at a given pressure ratio causes A. Increase in flow B. Decrease in flow C. Increase in efficiency D. Increase in flow and decrease in efficiency

Last Answer : ANSWER : D

In a centrifugal compressor an increase in speed at a given pressure ratio causes A. Increase in flow and increase in efficiency B. Increase in flow and decrease in efficiency C. Decrease in flow and increase in efficiency D. Decrease in flow and decrease in efficiency

Description : In a centrifugal compressor an increase in speed at a given pressure ratio causes A. Increase in flow and increase in efficiency B. Increase in flow and decrease in efficiency C. Decrease in flow and increase in efficiency D. Decrease in flow and decrease in efficiency

Last Answer : ANSWER : B

Supercharging of an IC engine is done so that the A. thermal efficiency increases B. power output increases C. speed of the engine increases D. power output decreases

Description : Supercharging of an IC engine is done so that the A. thermal efficiency increases B. power output increases C. speed of the engine increases D. power output decreases

Last Answer : ANSWER : B

Compressor mostly used for supercharging of IC engine is A. Radial flow compressor B. Axial flow compressor C. Root blower compressor D. Reciprocating compressor

Description : Compressor mostly used for supercharging of IC engine is A. Radial flow compressor B. Axial flow compressor C. Root blower compressor D. Reciprocating compressor

Last Answer : ANSWER : A

Which one of the following type of compressor is mostly used for supercharging of I.C engine A. Radial flow compressor B. Axial flow compressor C. Root blower D. Reciprocating compressor.

Description : Which one of the following type of compressor is mostly used for supercharging of I.C engine A. Radial flow compressor B. Axial flow compressor C. Root blower D. Reciprocating compressor.

Last Answer : ANSWER : C

In electronic fuel injection, there is improvement in the _____________ efficiency due to comparatively less resistance in the intake manifolds which will cause less pressure losses. a) mechanical b) volumetric c) overall d) none of the mentioned

Description : In electronic fuel injection, there is improvement in the _____________ efficiency due to comparatively less resistance in the intake manifolds which will cause less pressure losses. a) mechanical b) volumetric c) overall d) none of the mentioned

Last Answer : Answer: b Explanation: In electronic fuel injection, there is improvement only in the volumetric efficiency due to comparatively less resistance in the intake manifolds which will cause less pressure losses and no other efficiencies are hindered.

The ratio of partial pressure of water vapour in a mixture to the saturation pressure of water at the same temperature of the mixture is called as A. humidity B. partial humidity C. specific humidity D. relative humidity

Description : The ratio of partial pressure of water vapour in a mixture to the saturation pressure of water at the same temperature of the mixture is called as A. humidity B. partial humidity C. specific humidity D. relative humidity

Last Answer : ANSWER : D

Air fuel ratio for idling speed of a petrol engine is approximately A. 1:1 B. 5:1 C. 20:1 D. 10:1

Description : Air fuel ratio for idling speed of a petrol engine is approximately A. 1:1 B. 5:1 C. 20:1 D. 10:1

Last Answer : ANSWER : D

Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Description : Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Last Answer : ANSWER : A

In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Description : In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Last Answer : ANSWER : C

The output of a diesel engine can be increased without increasing the engine speed or size in the following way A. feeding more fuel B. increasing the flywheel size C. heating intake air D. supercharging

Description : The output of a diesel engine can be increased without increasing the engine speed or size in the following way A. feeding more fuel B. increasing the flywheel size C. heating intake air D. supercharging

Last Answer : ANSWER : D