What are the steps in resetting security lock out mode and can effect fuel reaching the throttle body?

What are the steps in resetting security lock out mode and can effect fuel reaching the throttle body?
by

1 Answer

Answer :

Just like The problem with this system is that at times it decreases throttle. For example, ECM reset does not clear the historical faults records.Step 1 Open the fuse panel in the driver-side foot well, under the steering column, pattern The ECU just resets itself back into the learning mode, I make a point to reset the ECU
by
selected by

Related questions

Compare throttle body injection with port fuel injection systems.

Description : Compare throttle body injection with port fuel injection systems.

Last Answer : Sr. No. TBI system PFI System 1 Fuel is injected into the center of the throttle body. Fuel is injected into the port 2 TBI uses bottom feed ... the throttle body. Hither power output due to low resistance at intake manifold and higher volumetric efficiency.

Given below are four methods (A-D) and their modes of action (i-iv) in achieving contraception. Select their correct matching from the four options that follow. Method Mode of Action A. The pill (i) Prevents sperms reaching cervix B. Condom (ii) Prevents implantation C. Vasectomy (iii) Prevents ovulation D. Copper T (iv) Semen contains no sperms (a) A – (iii), B – (iv), C – (i), D – (ii) (b) A – (ii), B – (iii), C – (i), D – (iv) (c) A – (iii), B – (i), C – (iv), D – (ii) (d) A – (iv), B – (i), C – (ii), D – (iii)

Description : Given below are four methods (A-D) and their modes of action (i-iv) in achieving contraception. Select their correct matching from the four options that follow. Method Mode of Action A. The pill (i) Prevents sperms reaching cervix B. Condom ... D - (ii) (d) A - (iv), B - (i), C - (ii), D - (iii)

Last Answer : A – (iii), B – (i), C – (iv), D – (

Which of the following steps in the planning process should be completed before the others can be addressed? (a) Putting plans into action ; (b) Stating organizational objectives (c) Listing alternative ways of reaching objectives (d) Developing premises on which to base each alternative

Description : Which of the following steps in the planning process should be completed before the others can be addressed? (a) Putting plans into action ; (b) Stating organizational objectives (c) Listing alternative ways of reaching objectives (d) Developing premises on which to base each alternative

Last Answer : (b) Stating organizational objectives

Mark correct option a) The resetting of the credit meter of the franking machine will be done at the POb) Cut out labels with frank impression on them for prepayment of postage cannotbe used for insured articlesc) The 2nd class articles treated as 1st class mail in sorting are Greetins/ Regd Newspapers/ Wedding invitationsd) The duty of taxing postage on foreign articles rest entirely with the office of foreign exchange of the country of postinge) All the above

Description : Mark correct option a) The resetting of the credit meter of the franking machine will be done at the PO b) Cut out labels with frank impression on them for prepayment of postage cannot be used ... articles rest entirely with the office of foreign exchange of the country of posting e) All the above

Last Answer : e) All the above

What did people do with all their time before they had to spend hours resetting passwords?

Description : What did people do with all their time before they had to spend hours resetting passwords?

Last Answer : They played tiddly-winks.

Why does resetting a wireless router often result in improved wireless connectivity?

Description : Why does resetting a wireless router often result in improved wireless connectivity?

Last Answer : One thing you can do is download a simple wifi sniffer on your smartphone. It's the quickest way I know to see what wifi channels are in use. It's not uncommon for networks to be walking ... devices connecting through it try turning all of them off except for one and see if your connection improves.

Why does my Kubuntu keeps resetting display properties when I reboot?

Description : Why does my Kubuntu keeps resetting display properties when I reboot?

Last Answer : What graphics card is in that system? I have one with an Nvidia card that does similar - I had to put a script in ~/.kde/Autorun to run something like: nvidia-settings -config=~/.nvidia-settings-rc -load- ... helpful, please mark it as a Great Answer - I am trying for a couple of the awards ;-) )

Who's that peer that keeps resetting your connection?

Description : Who's that peer that keeps resetting your connection?

Last Answer : But you are the bob_ , you have no equals. :) How can you get that message?

Samsung GT-S5610 cannot be turned on after resetting

Description : Hi, I have a Samsung GT-S5610 business phone and I need to return it to the company, so I reset it and after the phone showed me that it needs to be restarted, it can't be turned on. When I turn it ... , flashes, etc. all the time. I can't handle it at all. Can anyone please advise me? Thank you.

Last Answer : It's best to go to the service and get advice

after resetting gmail password until you can successfully log in

Description : after resetting gmail password until you can successfully log in

Last Answer : You should be able to access your account right away.

Component F in the illustrated device is for _________. EL-0033 A. short circut protection B. latching the trip unit closed after resetting the breaker C. overload protection D. providing a flexible connection between the input terminal G and the tripping unit E

Description : Component F in the illustrated device is for _________. EL-0033 A. short circut protection B. latching the trip unit closed after resetting the breaker C. overload protection D. providing a flexible connection between the input terminal G and the tripping unit E

Last Answer : Answer: C

Low voltage releases as used in some shipboard motor starter and control equipment will have which of the following characteristics? A. They trip circuit contactors when the motor starts to overspeed. B. They require manual resetting upon restoration of normal voltage. C. They use a phase sensitive relay to trip contacts in series with the holding coil of the starter. D. They allow the motor to restart upon restoration of normal voltage.

Description : Low voltage releases as used in some shipboard motor starter and control equipment will have which of the following characteristics? A. They trip circuit contactors when the motor starts to overspeed. B. ... coil of the starter. D. They allow the motor to restart upon restoration of normal voltage.

Last Answer : Answer: D

A low-voltage protection circuit is used in electric motor starting equipment to _____________. A. trip circuit contactors when the motor overspeeds due to low voltage B. trip circuit contactors when the motor develops a short circuit due to low voltage C. allow the motor to restart automatically on restoration of voltage without manually resetting D. prevent the motor from restarting automatically on restoration of voltage

Description : A low-voltage protection circuit is used in electric motor starting equipment to _____________. A. trip circuit contactors when the motor overspeeds due to low voltage B. trip circuit ... voltage without manually resetting D. prevent the motor from restarting automatically on restoration of voltage

Last Answer : Answer: D

Define resetting time of a relay.

Description : Define resetting time of a relay.

Last Answer : It is defined as the time taken by the relay from the instant of isolating the fault to the moment when the fault is removed and the relay can be reset.

Resetting of cotton flowers and double seed formation in cotton bolls are symptoms of — a. Red cotton bug b. Spotted bollworm c. Pink bollworm d. None of these

Description : Resetting of cotton flowers and double seed formation in cotton bolls are symptoms of — a. Red cotton bug b. Spotted bollworm c. Pink bollworm d. None of these

Last Answer : c. Pink bollworm

What is phase lock mode?

Description : What is phase lock mode? 

Last Answer : The inverter continuously follows the frequency and phase angle of classIII bus supply. 

how to clean electronic throttle body on 2008 dodge caliber

Description : how to clean electronic throttle body on 2008 dodge caliber

Last Answer : Need Answer

Where is the throttle body spacer located?

Description : Where is the throttle body spacer located?

Last Answer : The throttle body spacer is a small piece of metal that is attached the back of a throttle body. It is suppose to change the airflow which can potentially give you more horsepower and better fuel economy.

where can I purchase a body throttle spacer?

Description : where can I purchase a body throttle spacer?

Last Answer : You can buy a body throttle spacer on the internet, at your dealership or in a garage, all depends on your preferences. To be sure you get one that you will be satisfied with, you could ... the internet before making your selection, that way, you'll make the most informed decisions when you buy.

D-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Description : D-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Last Answer : Answer: b Explanation: D-MPFI system uses direct injection and L-MPFI system uses port injection while multipoint fuel injection system uses port injection and throttle body injection.

L-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Description : L-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Last Answer : Answer: a Explanation: L-MPFI system uses port injection while multi-point fuel injection system uses port injection and throttle body injection while D-MPFI system uses direct injection.

Explain the construction and working of throttle body injection (TBI) system.

Description : Explain the construction and working of throttle body injection (TBI) system. 

Last Answer : The throttle body injection (TBI) system uses one or two injector valves mounted in a throttle body assembly. The injectors spray fuel into the top of the throttle body air horn The TBI fuel ... are then used to calculate the triggering signals for the injectors and other system actuators.  

To what does the atmosphere's "greenhouse effect" refer to? w) the fact that ozone reflects ultraviolet radiation x) the fact that air prevents heat from leaving the earth y) the fact that clouds prevent sunlight from reaching the earth z) the fact that green plants use sunlight to produce food

Description : To what does the atmosphere's "greenhouse effect" refer to? w) the fact that ozone reflects ultraviolet radiation x) the fact that air prevents heat from leaving the earth y) the fact that clouds prevent sunlight from reaching the earth z) the fact that green plants use sunlight to produce food

Last Answer : ANSWER: X -- THE FACT THAT AIR PREVENTS HEAT FROM LEAVING THE EARTH 

Do you lock your car door when you get out to fuel up?

Description : Do you lock your car door when you get out to fuel up?

Last Answer : No. Why would I lock it? I’m standing right there.

Vapour lock is a. complete or partial stoppage of fuel supply due to vaporization of the fuel b. locking of carburetor due to high vapor pressure c. excess fuel supply to the engine d. supply of liquid fuel to the engine

Description : Vapour lock is a. complete or partial stoppage of fuel supply due to vaporization of the fuel b. locking of carburetor due to high vapor pressure c. excess fuel supply to the engine d. supply of liquid fuel to the engine

Last Answer : ANSWER a. complete or partial stoppage of fuel supply due to vaporization of the fuel

Did former National Security Adviser Michael Flynn choose to cooperate with Mueller because the last thing he wanted is to be ridiculed for yelling lock her up but instead he was the one who would have gotten locked-up?

Description : Did former National Security Adviser Michael Flynn choose to cooperate with Mueller because the last thing he wanted is to be ridiculed for yelling lock her up but instead he was the one who would have gotten locked-up?

Last Answer : I bet it was something else.

How to Enhance Your Security with a Computer Security Lock?

Description : How to Enhance Your Security with a Computer Security Lock?

Last Answer : It seems like everyone has a computer these days, and the computer has definitely revolutionized just about every single aspect of daily life. With this new advancement, people have begun to rely on their ... simply using a password, you are able to add an extra level of security to your device.

Benefits of a Kensington Security Lock?

Description : Benefits of a Kensington Security Lock?

Last Answer : For anyone that owns a computer, and uses it to pay bills or upload some personal information, keeping it safe is extremely important.ï ½ One accessory which needs to be purchased to help keep it safe ... , in turn, will ensure that nobody will be able to access the information on your computer.ï ½

Where can I buy a laptop security lock?

Description : Where can I buy a laptop security lock?

Last Answer : There are many retailers that offer laptop security locks. They are available online and at most major retailers such as Walmart and OfficeMax.

What is the most reliable PC Security lock device?

Description : What is the most reliable PC Security lock device?

Last Answer : I would suggest looking at www.secure-it.com/. They offer a wide range of computer security options. There are lock systems for desktop and laptop computers.

When I close the throttle on my car, and allow speed to bleed off, is this a Delta-V scalar?

Description : When I close the throttle on my car, and allow speed to bleed off, is this a Delta-V scalar?

Last Answer : answer:So long as you travel in a straight line. As you probably know, turning is a change in velocity ( ΔV ) even if speed remains constant. However, if direction does not change then any ΔV ... and direction; a scalar and a vector, and we've alread declared the vector component to be constant.

the throttle stops working while driving

Description : audi A3 8l 1.8 t 110kw Hello, I started to have an unpleasant anomaly on the car. When driving, it happens to me (completely irregularly sometimes in 15 minutes of driving, sometimes in 4 hours) ... never happened to me that the car always wants the same scenario is repeated . Thank you in advance

Last Answer : look here you could have the same https://www.club-opel.cz/viewtopic.php?f=150&t=276

assemble the throttle for a mercury optimax

Description : assemble the throttle for a mercury optimax

Last Answer : Need Answer

What will a bad throttle positoning sensor do in a 95 jeep grand Cherokee?

Description : What will a bad throttle positoning sensor do in a 95 jeep grand Cherokee?

Last Answer : Feel Free to Answer

Is the throttle on the right side or the left side of the motorcycle?

Description : Is the throttle on the right side or the left side of the motorcycle?

Last Answer : The throttle is on the right handlebar grip. Your brakes are the levers on each handlebar, the front brake is on the right and the rear brake is on the left.

The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Description : The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Last Answer : Ans: d

In vapour compression cycle the condition of refrigerant is superheated vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) beforeentering the expansion valve

Description : In vapour compression cycle the condition of refrigerant is superheated vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) beforeentering the expansion valve

Last Answer : Ans: b

In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Last Answer : Ans: d

In vapour compression cycle, the condition of refrigerant is very wet vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is very wet vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Last Answer : Ans: c

In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Last Answer : Ans: a

In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Description : In spark ignition engines, the knocking tendency can be decreased by a) decreasing compression ratio b) controlling intake throttle c) controlling ignition timing d) adding dopes like tetraethyl lead and ethylene dibromide

Last Answer : Answer: d Explanation: None.

The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: d Explanation: The knock sensor,is a microphone type sensor that detects ping or pre-ignition noise so that the ignition timing can be retarded while the camshaft position sensor, senses ... the engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: c Explanation: The camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection whereas the throttle position sensor, senses the movement of the throttle ... engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

The ___________ sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The ___________ sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: b Explanation: The manifold pressure sensor, monitors vacuum in the engine intake manifold so that the mixture strength can be adjusted with changes in engine load and the camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection.

The _____________ sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: a Explanation: The throttle position sensor, senses the movement of the throttle plate so that the mixture flow can be adjusted for engine speed and acceleration while the manifold ... the camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection.

Under which of the listed conditions can the engine room retake the throttle control from the bridge? A. Any time it is deemed necessary. B. Only with the master's permission. C. After a 10 minute delay to the input command. D. Only after the throttle has been placed in stop.

Description : Under which of the listed conditions can the engine room retake the throttle control from the bridge? A. Any time it is deemed necessary. B. Only with the master's permission. C. After a 10 minute delay to the input command. D. Only after the throttle has been placed in stop.

Last Answer : Answer: A

The conversion of the throttle command voltage to the signal necessary to achieve the desired shaft RPM is accomplished by the _____________. A. ahead or astern function generator of the throttle control circuit B. feedback resistor of the summing amplifier circuit C. operational amplifiers in the autorotation circuit D. long time constant amplifier circuit

Description : The conversion of the throttle command voltage to the signal necessary to achieve the desired shaft RPM is accomplished by the _____________. A. ahead or astern function generator of the ... circuit C. operational amplifiers in the autorotation circuit D. long time constant amplifier circuit

Last Answer : Answer: A

On an engine throttle control system, the auxiliary control circuits are provided with devices to prevent excessive overtravel of the pilot valve by the synchronous motor. These devices are called _________________. A. overlap sensors B. limit switches C. overtravel relays D. proximity switches

Description : On an engine throttle control system, the auxiliary control circuits are provided with devices to prevent excessive overtravel of the pilot valve by the synchronous motor. These devices are called _________________. A. overlap sensors B. limit switches C. overtravel relays D. proximity switches

Last Answer : Answer: B

6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Description : 6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (C) Merely compressing it beyond critical pressure