What town is halfway between landing and traverse city?

What town is halfway between landing and traverse city?
by

1 Answer

Answer :

I'm going to assume you're in Michigan and you meant to typeLansing. The halfway point is Farwell.
by

Related questions

What town is halfway between landing and traverse city?

Description : What town is halfway between landing and traverse city?

Last Answer : I'm going to assume you're in Michigan and you meant to typeLansing. The halfway point is Farwell.

What town is halfway between Savannah Georgia and Charleston South Carolina?

Description : What town is halfway between Savannah Georgia and Charleston South Carolina?

Last Answer : Yemassee, SC

What town is halfway between York PA and Tannersville PA?

Description : What town is halfway between York PA and Tannersville PA?

Last Answer : What town is halway between York PA & Tannersville PA

What town is the halfway point from Wauconda Il to West Virginia?

Description : What town is the halfway point from Wauconda Il to West Virginia?

Last Answer : West Virginia is 130 miles across which means your halfway point could vary by as much as 65 miles depending on where in West Virginia you wish to go. You will probably end up somewhere in Ohio, likely around ... West Virginia from there, I would try to stop at Canton, OH, but I'm a football fan.

What city is halfway between Charleston South Carolina and Savannah Ga?

Description : What city is halfway between Charleston South Carolina and Savannah Ga?

Last Answer : Yemassee, SC

What towns are halfway between rapid city SD and Minot ND?

Description : What towns are halfway between rapid city SD and Minot ND?

Last Answer : New England, ND

What city is halfway between Riverview Mi and Rocky face Ga?

Description : What city is halfway between Riverview Mi and Rocky face Ga?

Last Answer : Need answer

What towns are halfway between rapid city SD and Minot ND?

Description : What towns are halfway between rapid city SD and Minot ND?

Last Answer : New England, ND

What city is halfway between Washington nc and key largo fl?

Description : What city is halfway between Washington nc and key largo fl?

Last Answer : Brunswick GA

What ancient device allows people to traverse through walls? -Riddles

Description : What ancient device allows people to traverse through walls? -Riddles

Last Answer : Doors.

Two charged particles traverse identical helical paths in a completely opposite sense in a uniform magnetic field `vec(B)=B_(0)hat(K)`

Description : Two charged particles traverse identical helical paths in a completely opposite sense in a uniform magnetic field `vec(B)=B_(0)hat(K)`

Last Answer : Two charged particles traverse identical helical paths in a completely opposite sense in a uniform magnetic field `vec(B)=B_ ... + ((e)/(m))_(2) = 0`

What is the cargo capacity of the Chevrolet Traverse?

Description : What is the cargo capacity of the Chevrolet Traverse?

Last Answer : A 2017 Chevrolet Traverse with all seats in place has 24.4 cubic feet of cargo space.

Is the Chevy Traverse a good vehicle for a long distance road trip?

Description : Is the Chevy Traverse a good vehicle for a long distance road trip?

Last Answer : Yes, it is a good vehicle for a long distance road trip, because it is a crossover. It also gets good gas mileage, and is very comfortable. This car would be perfect for you and your family!

Which operations are to be performed on a directory are: a. Search for a file b. Create a file c. Delete a file d. List a directory e. Rename a file f. Traverse the file system g. Allof these

Description : Which operations are to be performed on a directory are: a. Search for a file b. Create a file c. Delete a file d. List a directory e. Rename a file f. Traverse the file system g. Allof these

Last Answer : g. Allof these

A traverse deflection angle is (A) Less than 90° (B) More than 90° but less than 180° (C) The difference between the included angle and 180° (D) The difference between 360° and the included angle

Description : A traverse deflection angle is  (A) Less than 90°  (B) More than 90° but less than 180°  (C) The difference between the included angle and 180°  (D) The difference between 360° and the included angle 

Last Answer : (C) The difference between the included angle and 180° 

If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making repeated observations of angular and linear measurements (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Description : If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs,  the accuracy of the traverse may be improved by  (A) Taking short legs  (B) Making ... (C) Making a subsidiary traverse to determine the length of a long leg  (D) All the above 

Last Answer : (C) Making a subsidiary traverse to determine the length of a long leg 

If the angular measurements of a traverse are more precise than its linear measurements, balancing of the traverse, is done by (A) Bowditch's rule (B) Transit rule (C) Empirical rule (D) All of the above

Description : If the angular measurements of a traverse are more precise than its linear measurements,  balancing of the traverse, is done by  (A) Bowditch's rule  (B) Transit rule  (C) Empirical rule  (D) All of the above 

Last Answer : (B) Transit rule 

In a precision traverse, included angles are measured by setting the vernier (A) To read zero exactly on back station (B) To read 5° exactly on back station (C) Somewhere near zero and reading both verniers on back station (D) All the above

Description : In a precision traverse, included angles are measured by setting the vernier  (A) To read zero exactly on back station  (B) To read 5° exactly on back station  (C) Somewhere near zero and reading both verniers on back station  (D) All the above

Last Answer : (C) Somewhere near zero and reading both verniers on back station 

If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

Description : If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

Last Answer : (D) 360°

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

The included angles of a theodolite traverse, are generally measured (A) Clockwise from the forward station (B) Anti-clockwise from the back station (C) Anti-clockwise from the forward station (D) Clockwise from the back station

Description : The included angles of a theodolite traverse, are generally measured (A) Clockwise from the forward station (B) Anti-clockwise from the back station (C) Anti-clockwise from the forward station (D) Clockwise from the back station

Last Answer : (D) Clockwise from the back station

The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Description : The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Last Answer : (D) 18° 15' L

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Description : The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Last Answer : (B) Latitude to the leg

The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Description : The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Last Answer : (B) By independent co-ordinates of each station

In a closed traverse, sum of south latitudes exceeds the sum of north latitudes and the sum of east departures exceeds the sum of west departures, then, the closing line will lie in (A) North-west quadrant (B) North-east quadrant (C) South-east quadrant (D) South-west quadrant

Description : In a closed traverse, sum of south latitudes exceeds the sum of north latitudes and the sum of east departures exceeds the sum of west departures, then, the closing line will lie in (A) North-west quadrant (B) North-east quadrant (C) South-east quadrant (D) South-west quadrant

Last Answer : (A) North-west quadrant

The distance between terminal points computed from a subsidiary traverse run between them, is generally known, as (A) Traverse leg (B) A base (C) Traverse base (D) All the above

Description : The distance between terminal points computed from a subsidiary traverse run between them, is generally known, as (A) Traverse leg (B) A base (C) Traverse base (D) All the above

Last Answer : (C) Traverse base

Pick up the correct statement from the following (A) 1 second of arc corresponds to a displacement ratio of 1:206, 300 (B) 1 degree of arc corresponds to a displacement ratio of 1:57(C) The angular errors tend to propagate themselves along a traverse as the square root of the number of stations (D) All the above

Description : Pick up the correct statement from the following (A) 1 second of arc corresponds to a displacement ratio of 1:206, 300 (B) 1 degree of arc corresponds to a displacement ratio of 1:57 (C) ... to propagate themselves along a traverse as the square root of the number of stations (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse (B) The system of a series of lines which forms a circuit which ends at the starting point, is called a closed traverse (C) The traverse that starts from a point already fixed in some survey system and ends on another such point, is called a controlled traverse (D) All the above

Description : Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse ... system and ends on another such point, is called a controlled traverse (D) All the above

Last Answer : (D) All the above

The operation of making the algebraic sum of latitudes and departures of a closed traverse, each equal to zero, is known (A) Balancing the sights (B) Balancing the departures (C) Balancing the latitudes (D) Balancing the traverse

Description : The operation of making the algebraic sum of latitudes and departures of a closed traverse, each equal to zero, is known (A) Balancing the sights (B) Balancing the departures (C) Balancing the latitudes (D) Balancing the traverse

Last Answer : (D) Balancing the traverse

The angle between the prolongation of the preceding line and the forward line of a traverse is called (A) Deflection angle (B) Included angle (C) Direct angle (D) None of the above

Description : The angle between the prolongation of the preceding line and the forward line of a traverse is called (A) Deflection angle (B) Included angle (C) Direct angle (D) None of the above

Last Answer : (A) Deflection angle

For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Description : For a closed traverse the omitted measurements may be calculated (A) Length of one side only (B) Bearing of one side only (C) Both length and bearing of one side (D) All the above

Last Answer : (D) All the above

If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures than the sum of the east departures, the bearing of the closing line is in the (A) NE quadrant (B) SE quadrant (C) NW quadrant(D) SW quadrant

Description : If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures than the sum of the east departures, the bearing of the closing line is in the (A) NE quadrant (B) SE quadrant (C) NW quadrant (D) SW quadrant

Last Answer : (B) SE quadrant

Under ordinary conditions, the precision of a theodolite traverse is affected by (A) Systematic angular errors (B) Accidental linear errors (C) Systematic linear errors (D) Accidental angular errors

Description : Under ordinary conditions, the precision of a theodolite traverse is affected by (A) Systematic angular errors (B) Accidental linear errors (C) Systematic linear errors (D) Accidental angular errors

Last Answer : (C) Systematic linear errors

Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate than linear measurements (C) Linear measurements are more accurate than angular measurements (D) All of the above

Description : Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate ... (C) Linear measurements are more accurate than angular measurements (D) All of the above

Last Answer : (B) Angular measurements are more accurate than linear measurements

If is the perimete D is the closing error in departure, the correction for the departure of a traverse side of length , according to Bowditch rule, is (A) D × L/l (B) D × l²/L (C) L × l D (D) D × l/L

Description : If is the perimete D is the closing error in departure, the correction for the departure of a traverse side of length , according to Bowditch rule, is (A) D × L/l (B) D × l²/L (C) L × l D (D) D × l/L

Last Answer : (D) D × l/L

Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and not the linear measurements (B) Linear measurements are correct and not the angular measurements (C) Angular and linear measurements are correct and not the plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Description : Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and ... plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Last Answer : (D) Angular and linear measurements and also plotting of the traverse are correct

Bowditch rule is applied to (A) An open traverse for graphical adjustment (B) A closed traverse for adjustment of closing error (C) Determine the effect of local attraction (D) None of the above

Description : Bowditch rule is applied to (A) An open traverse for graphical adjustment (B) A closed traverse for adjustment of closing error (C) Determine the effect of local attraction (D) None of the above

Last Answer : (B) A closed traverse for adjustment of closing error

The length of a traverse leg may be obtained by multiplying the latitude and (A) Secant of its reduced bearing (B) Sine of its reduced bearing (C) Cosine of its reduced bearing (D) Tangent of its reduced bearing

Description : The length of a traverse leg may be obtained by multiplying the latitude and (A) Secant of its reduced bearing (B) Sine of its reduced bearing (C) Cosine of its reduced bearing (D) Tangent of its reduced bearing

Last Answer : (A) Secant of its reduced bearing

Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) Measuring angles to the point from at least two stations (C) Measuring angle at one station and distance from other (D) Measuring distance from two points on traverse line

Description : Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) ... at one station and distance from other (D) Measuring distance from two points on traverse line

Last Answer : (B) Measuring angles to the point from at least two stations

From which of the following is basic robotic motion. (A) Vertical traverse (B) Radial traverse (C) Rotational traverse (D) All of the above

Description : From which of the following is basic robotic motion. (A) Vertical traverse (B) Radial traverse (C) Rotational traverse (D) All of the above

Last Answer : D

Which of the following statement is true? i) Using singly linked lists and circular list, it is not possible to traverse the list backwards. ii) To find the predecessor, it is required to traverse the list from the first node in case of singly linked list. A) i-only B) ii-only C) Both i and ii D) None of both

Description : Which of the following statement is true? i) Using singly linked lists and circular list, it is not possible to traverse the list backwards. ii) To find the predecessor, it is required to traverse the list from the first ... linked list. A) i-only B) ii-only C) Both i and ii D) None of both

Last Answer : C) Both i and ii

List any four methods of plotting a compass traverse survey & explain any one in brief. Also state the meaning of adjustment of closing error of traverse.

Description : List any four methods of plotting a compass traverse survey & explain any one in brief. Also state the meaning of adjustment of closing error of traverse.

Last Answer : Methods of plotting compass traverse are: 1. By parallel meridian through each station. 2. By included angle. 3. By paper protractor. 4. By rectangular co-ordinates. 5. ... . 5. Finally join new points to get corrected traverse ABCDEA after graphical adjustment of closing error. 

Define the terms i) Fore Bearing, ii) Open traverse, iii) Closing error, iv) Reduced bearing

Description : Define the terms i) Fore Bearing, ii) Open traverse, iii) Closing error, iv) Reduced bearing

Last Answer : i) Fore bearing : The bearing observed in the direction of progress of survey in clockwise manner is called fore bearing  ii) Open traverse : When the first and last survey lines does ... north or south direction in clockwise or anticlockwise manner is known as reduced or quadrantal bearing. 

What is open traverse and closed traverse?

Description : What is open traverse and closed traverse?

Last Answer : a) Open traverse - 1. When starting point of survey does not coincide with last point of the survey, it is known as open traverse. 2. It is used for the survey roads, rivers coastal line railways ... traverse. 2. It is suitable for the survey of boundaries of ponds, forests, estate, etc.

State different methods of plotting compass traverse.

Description : State different methods of plotting compass traverse. 

Last Answer : Methods of plotting compass traverse are: 1. By parallel meridian through each station. 2. By included angle. 3. By paper protractor. 4. By rectangular co-ordinates. 5. Plotting by tangents. 6. Plotting by chords.

Define: i) Open Traverse ii) Closed Traverse.

Description : Define: i) Open Traverse ii) Closed Traverse. 

Last Answer : i) Open traverse: When the first and last survey lines does not meets at common point and hence does not form a closed polygon, then it is said to be open traverse.  ii) Closed Traverse: When last and first survey stations meet at common point, traverse is called as closed traverse.

Explain Graphical adjustment of closing error in a closed traverse.

Description : Explain Graphical adjustment of closing error in a closed traverse.  

Last Answer : Step: 1) Draw a horizontal line AA1 equal to the length of perimeter of the traverse to a suitable scale. 2) Mark the distances AB,BC,CD, etc on the line as per their lengths. 3) Draw a perpendicular ... errors 7) Join the the new points which gives the closed traversed. A, B, C, D and A.

State the different point to be considered in selection of survey station for a closed traverse

Description : State the different point to be considered in selection of survey station for a closed traverse 

Last Answer : 1) Main survey stations should be inter visible. 2) The main survey lines should form well-conditioned triangles. 3) Each triangle or portion of skeleton must be provided with sufficient check lines. ... ) Survey line must be as few as possible so that the frame work can be plotted conveniently.