Operating torques in analogue instruments are?

by

1 Answer

Answer :

Operating torques in analogue instruments are deflecting, control and damping.

by

Related questions

List different torques in synchronous motor.

Description : List different torques in synchronous motor. 

Last Answer : Different Torques in Synchronous Motor: 1) Starting torque 2) Running torque 3) Pull-in torque 4) Pull-out torque

Sampling of Analogue Signals

Description : Sampling of Analogue Signals

Last Answer : Sampling of Analogue Signals Sampling means splitting in regular interval to convert it in digital form. Sampling converts continuous signal to discrete signal. Actually the accuracy ... use. Using sampling we can store the analogue data in digital form.

Permanent magnet moving coil instruments are used for

Description : Permanent magnet moving coil instruments are used for

Last Answer : PMME are mostly used for measuring voltage and current.

The use of _____ instruments is merely confined within laboratories as standardising instruments.

Description : The use of _____ instruments is merely confined within laboratories as standardising instruments.

Last Answer : The use of absolute instruments is merely confined within laboratories as standardizing instruments.

Commonly used instruments in power system measurement are?

Last Answer : Commonly used instruments in power system measurement are induction.

The power factor of a single phase load can be calculated if the instruments available are?

Last Answer : The power factor of a single phase load can be calculated if the instruments available are three ammeters or three voltmeters.

The switch board instruments?

Last Answer : The switch board instruments should be mounted in vertical position.

In majority of instruments damping is provided by?

Last Answer : In the majority of instruments, damping is provided by eddy currents.

According to application, instruments are classified as?

Last Answer : According to application, instruments are classified as switch board, portable.

The use of which instruments is merely confined within laboratories as standardizing instruments?

Last Answer : The use of absolute instruments is merely confined within laboratories as standardizing instruments.

What do you mean by secondary instruments?

Description : What do you mean by secondary instruments?

Last Answer : The instruments which will give the direct readings are called secondary instruments

The operating voltage of a meggar is about?

Last Answer : The operating voltage of a meggar is about 100 V.

List of Scientific Instruments

Description : List of Scientific Instruments

Last Answer : Hydrometer measures humidity Barometer measures atmospheric pressure Purity of milk is measured by lactometer Fathometer measures the depth of oceans. Sextant is used for measuring ... regulate the temperature to a particular degree. Viscometer: is an instrument to measure viscosity.

Electrical Measuring Instruments

Description : Electrical Measuring Instruments

Last Answer : Electrical Measuring Instruments

Compare analog and digital instruments .

Description : Compare analog and digital instruments .

Last Answer : Parameter Analog Instrument Digital Instrument  1 Principle The instrument that displays analog signals is called as on analog instrument.  The instrument that displays ... , etc. Logical analyzer, signature analyzer, computers, microprocessor based instruments, etc. 

calibration and the need of calibration for measuring instruments.

Description : calibration and the need of calibration for measuring instruments.

Last Answer : Calibration - It is a process of estimating the value of a quantity by comparing that quantity with a standard quantity.    Need of calibration: - Calibration defines the accuracy and ... aim of calibration is to minimize any measurement uncertainty by ensuring the accuracy of test equipment.

Advantages of digital instruments

Description : Advantages of digital instruments

Last Answer : 1. They are having high input impedance, so there is no loading effect 2. They are having higher accuracy 3. An unambiguous reading is obtained 4. The output can be interfaced with external equipment 5. They are available in smaller size . 

State the effect of dead zone on instruments.

Description : State the effect of dead zone on instruments.

Last Answer : It is the largest change in input during which the output remains constant. So during dead zone, even if input changes, output remains the same.

Define: i) Range ii) Span of instruments

Description : Define: i) Range ii) Span of instruments

Last Answer : i) Range: It is defined as the difference between Greatest and Smallest value of the data or reading of the instrument.  ii) Span: It is defined as the algebraic difference between the upper and lower range values

Explain the essential toques in analog type measuring instruments.

Description : Explain the essential toques in analog type measuring instruments.

Last Answer : List of torques in analog instruments:  1. Deflecting torque  2. Controlling / Restraining torque.  3. Damping torque.  1. Deflecting torque: To create deflection proportional to ... the speed higher will be the damping torque bringing the pointer to the equilibrium position quickly. 

State two purposes of calibration of measuring instruments.

Description : State two purposes of calibration of measuring instruments.

Last Answer : Purposes of calibration of measuring instruments: - The purpose of calibration is to ensure that readings of an instrument are consistent with other instruments. It is also important in determining the ... will need to be calibrated periodically to make sure it can function properly and safely. 

List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Description : List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Last Answer : Types of errors in measuring instruments:  A) Gross error: These are due to mistakes on the part of person using the instrument.  B) Systematic Error: i) Instrumental Error: These ... multiplying factor.  C) Random error: These persist even after gross and systematic errors are removed.

State the meaning of secondary instrument. Classify secondary instruments.

Description : State the meaning of secondary instrument. Classify secondary instruments.

Last Answer : Secondary instruments: - Gives reading directly of the quantity being measured. - Calibrated with respect to absolute instruments  Classification of Secondary instruments:  1. Depending on the ... on permissible error: i) Standard meters ii) Substandard meters iii) First grade instruments.

Define following terms related to measuring instruments: i) Sensitivity ii) Selectivity.

Description : Define following terms related to measuring instruments: i) Sensitivity ii) Selectivity.

Last Answer : i) Sensitivity: It is the ratio of the change in output signal to the change in input signal of quantity being measured.  ii) Selectivity: It is the term to describe fulfillment of the requirements of measurement by an instrument to be suitable for use in a given situation. 

List out any four effects of electric current used in measuring instruments & write name of meter working on it.

Description : List out any four effects of electric current used in measuring instruments & write name of meter working on it.

Last Answer : Effects of Electric Current used in measuring instruments:  1. Magnetic Effect: PMMC and Moving Iron type Ammeters, voltmeter and Dynamometer type wattmeters etc.  2. Electromagnetic induction ... . Electrostatic effect: Voltmeters.  5. Hall Effect: Flux meter, Poynting vector wattmeter.

Describe systematic errors in measuring instruments.

Description : Describe systematic errors in measuring instruments. 

Last Answer : Systematic errors: -  ➢ Instrumental Error: These errors are caused due to the mechanical structure of measuring instrument.  a) Inherent shortcomings of instruments: Instrument may read ... or electrostatic fields.  ➢ Observational Error: Parallax errors, incorrect multiplying factor. 

Compare primary and secondary instruments.

Description : Compare primary and secondary instruments.

Last Answer : Primary instruments  Secondary instruments  Gives magnitude of quantity in terms of physical constants of instrument  Gives reading directly of the quantity measured.  Need no calibration  ... .  e.g. magnetic meter, induction meter, hotwire meter and electrostatic meter 

State the material used for moving coil and former for PMMC instruments.

Description : State the material used for moving coil and former for PMMC instruments. 

Last Answer : Material Used for Moving Coil and Former for PMMC Instruments:  Material used for moving coil: Copper  Material used for Former: Aluminium

List any four effects employed in measuring instruments.

Description : List any four effects employed in measuring instruments.

Last Answer : Effects Employed in Measuring Instruments: 1. Magnetic Effect 2. Electromagnetic induction 3. Heating effect 4. Electrostatic effect 5. Hall Effect 

Standard Commands for Programmable Instruments (SCPI)

Description : Standard Commands for Programmable Instruments (SCPI)

Last Answer : Standard Commands for Programmable Instruments (SCPI) SCPI stands for Standard Commands for Programmable Instruments it is often pronounced as Skippy. SCPI is a instrument language that control the ... is for storing data in instrument. Display : for presentation.

How to Uninstall an Operating System ?

Description : How to Uninstall an Operating System ?

Last Answer : How to Uninstall an Operating System Even the most stable operating systems can crash, and suffer from irreparable damage that you may need to uninstall and reinstall them. Some users, though, may like to ... , you can easily remove the old, damaged operating system, and replace it with a new one.

operating principle of PUT.

Description :  operating principle of PUT.

Last Answer : Constructional diagram & Operating principle of PUT:  The PUT is a PNPN device similar to SCR, but its operation is similar to the UJT. The PUT behave like a UJT whose trigger voltage VP can be set ... low resistance and VAK ≈ 1V). The PUT is also referred to as a complementary SCR (CSCR). 

Transistor operating configurations

Description : Transistor operating configurations

Last Answer : Transistor operating configurations

Draw construction of Megger and write operating principle of it.

Description : Draw construction of Megger and write operating principle of it.

Last Answer : Megger:  Working: Two coils the current coil and pressure coil are mounted at an angle on the same spindle and form the part of the moving system. These coils are connected to a small hand driven ... . When the instrument is not working the pointer may rest at any position on the dial.

Explain the operating principle of LASER and list applications of LASER diode.

Description : Explain the operating principle of LASER and list applications of LASER diode.

Last Answer : A basic construction of Laser diode is as shown . A PN junction is formed by two layers of doped gallium arsenide. There is highly reflective surface at one end of PN junction and ... 6. laser scanning and light beam illumination. 7. Military applications 8. Medical surgery 9.Diamond cutting

The command line interpreter that enables the users to interact with operating system is called the

Description : The command line interpreter that enables the users to interact with operating system is called the A) Window B) Shell C) Process D) Kernel 

Last Answer : The command line interpreter that enables the users to interact with operating system is called the Shell 

The operating point of a protective current transformer is near the

Description : The operating point of a protective current transformer is near the

Last Answer : The operating point of a protective current transformer is near the Ankle point

The operating time of instantaneous relay is

Description : The operating time of instantaneous relay is

Last Answer : The operating time of instantaneous relay is 0.1 sec

A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Last Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

In a single-phase induction motor, the operating direction is determined by the ________

Description : In a single-phase induction motor, the operating direction is determined by the ________ A) Rotor B) Stator C) Starting circuit D) None of these

Last Answer : In a single-phase induction motor, the operating direction is determined by the Starting circuit

What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016

Description : What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

Last Answer : What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a

Description : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) ... proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α

Last Answer : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ directly proportional to α and inversely proportional to Φ

In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load,

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

Two synchronous generators operating in parallel supply a common load of 2.5 MW. The frequency-power

Description : Two synchronous generators operating in parallel supply a common load of 2.5 MW. The frequency-power characteristics have a common slope of 1 MW/Hz and the no-load frequencies of the generators are 51.5 Hz and 51.0 Hz, ... system frequency is (A) 50 Hz (B) 51 Hz (C) 51.25 Hz (D) 51.5 Hz

Last Answer : Two synchronous generators operating in parallel supply a common load of 2.5 MW. The frequency-power characteristics have a common slope of 1 MW/Hz and the no-load frequencies of the generators are 51.5 Hz and 51.0 Hz, respectively. Then the system frequency is 50 Hz

A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred

Description : A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred resistance of 0.2 Ω and reactance of 0.5 Ω. The approximate primary induced emf is (A) 216 V (B) 226 V (C) 234 V (D) 236 V

Last Answer : A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred resistance of 0.2 Ω and reactance of 0.5 Ω. The approximate primary induced emf is 226 V

To limit the operating temperature an electrical machine should have proper?

Last Answer : To limit the operating temperature an electrical machine should have proper current rating.

The operating speed of a synchronous motor can be changed to new fixed value by?

Last Answer : The operating speed of a synchronous motor can be changed to new fixed value by changing frequency.

Annual operating expenditure of a power plant consists of?

Last Answer : Annual operating expenditure of a power plant consists of fixed charges, semi-fixed charges, running charges.

The relay operating speed depends upon?

Last Answer : The relay operating speed depends upon the spring tension, the rate of flux built up, armature core air gap.

The secondary of a current transformer is always short-circuited under operating conditions because it?

Description : The secondary of a current transformer is always short-circuited under operating conditions because it?

Last Answer : The secondary of a current transformer is always short-circuited under operating conditions because it avoids core saturation and high voltage induction.