An electric immersion heater of `1.08 kW` is immersed in water . After it has reaches a temperature of `100^(@)C` , how much time will be required to

An electric immersion heater of `1.08 kW` is immersed in water . After it has reaches a temperature of `100^(@)C` , how much time will be required to
by

1 Answer

Answer :

An electric immersion heater of `1.08 kW` is immersed in water . After it has reaches a temperature of `100^(@)C` ... 50 s B. 420 s C. 105 s D. 105 s
by
selected by

Related questions

Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater. (A) Electric immersion (B) Pipestill (C) Steam coil (D) None of these

Description : Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater. (A) Electric immersion (B) Pipestill (C) Steam coil (D) None of these

Last Answer : (B) Pipestill

An electric heater draws 5 kW of power for continuous hot water generation in an industry. How much quantity of water in litres per min can be heated from 30oC to 85oC ignoring losses?. a) 1.3 b) 78.18 c) 275 d) none of the above

Description : An electric heater draws 5 kW of power for continuous hot water generation in an industry. How much quantity of water in litres per min can be heated from 30oC to 85oC ignoring losses?. a) 1.3 b) 78.18 c) 275 d) none of the above

Last Answer : a) 1.3

Where can I purchase a immersion heater?

Description : Where can I purchase a immersion heater?

Last Answer : YOu can purchse an immersion heater by going to the following website http://www.chromalox.com/productcatalog/Industrial+Heaters/Immersion+Heaters/product-family-router.aspx?f=83

An immersion heater of 400 watts kept on for 5 hours will consume electrical power of a. 2KWh b. 20KWh c. 6KWh d. 12KWh

Description : An immersion heater of 400 watts kept on for 5 hours will consume electrical power of a. 2KWh b. 20KWh c. 6KWh d. 12KWh

Last Answer : a. 2KWh

A thin glass prism placed in air produces minimum deviation of `4^(@)` in a light ray. If the prism is immersed in water, what will be the minimum dev

Description : A thin glass prism placed in air produces minimum deviation of `4^(@)` in a light ray. If the prism is immersed in water, what will be the minimum dev

Last Answer : A thin glass prism placed in air produces minimum deviation of `4^(@)` in a light ray. If the prism is immersed in ... //2` and `.^(a)mu_(w) = 4//3`.

A heater is rated as 230 V, 10 kW, A.C. The value 230 V refers to?

Last Answer : A heater is rated as 230 V, 10 kW, A.C. The value 230 V refers to r.m.s. voltage.

A building intended to be used for commercial purpose will be required to follow Energy conservation building code under Energy Conservation Act, 2001 provided its a) connected load is 120 kW and above b) contract demand is 100 kVA and above c) connected load is100 kW and above or contract demand is 120 kVA and above

Description : A building intended to be used for commercial purpose will be required to follow Energy conservation building code under Energy Conservation Act, 2001 provided its a) connected load is 120 kW and above b) ... and above c) connected load is100 kW and above or contract demand is 120 kVA and above

Last Answer : c) connected load is100 kW and above or contract demand is 120 kVA and above

Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, work required decreases as the temperature of the refrigerator and the temperature at which heat is rejected increases (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Description : Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, ... (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Last Answer : (A) A refrigeration cycle violates the second law of thermodynamics

The following heat engine produces power of 100,000 kW. The heat engine operates between 800 K and 300 K. It has a thermal efficiency equal to 50% of that of the Carnot engine for the same temperature. The rate at which heat is absorbed from the hot reservoir is (A) 100,000 kW (B) 160,000 kW (C) 200,000 kW (D) 320,000 kW

Description : The following heat engine produces power of 100,000 kW. The heat engine operates between 800 K and 300 K. It has a thermal efficiency equal to 50% of that of the Carnot engine for the same temperature. The rate at which heat is ... is (A) 100,000 kW (B) 160,000 kW (C) 200,000 kW (D) 320,000 kW

Last Answer : (D) 320,000 kW

10.(a) An ore on treatment with dilute hydrochloric acid produces brisk effervesces. What type of ore is this? What steps will be required to obtain metal from the enriched ore. , (b) Copper coin is kept immersed in silver nitrate solution for some time. What change will take place in coin and colour of the solution ? Write balanced chemical equation of the reaction involved. -Chemistry

Description : 10.(a) An ore on treatment with dilute hydrochloric acid produces brisk effervesces. What type of ore is this? What steps will be required to obtain metal from the enriched ore. , (b) ... in coin and colour of the solution ? Write balanced chemical equation of the reaction involved. -Chemistry

Last Answer : (a) Carbonate ore: (i) Calcination: Carbonate ore is heated in limited supply of air and oxide is obtained, e.g. (b) Copper, being more reactive than silver will displace silver from silver nitrate ... and there will be deposition of silver on copper coin. The colour of solution will turn to blue.

In order to find the specific heat capacity of an unknown material a 50 g piece is heated to 80 degrees Celsius and fully immersed in a well insulated calorimeter filled with 100 g of water at 10 degr?

Description : In order to find the specific heat capacity of an unknown material a 50 g piece is heated to 80 degrees Celsius and fully immersed in a well insulated calorimeter filled with 100 g of water at 10 degr?

Last Answer : Assuming that the full question, which the questioner failed to post, is given in the Discussion, below.Taking the specific heat capacity of water as 4.2 Joules per gram per degree C, the metal has a specific heat capacity as approx 0.68 Joules/(g °C).

The starting current of an electric motor is ________ the current flowing after the motor reaches its normal running speed. (a) nearly equal to (b) exactly equal to (c) less than (d) much greater than

Description : The starting current of an electric motor is ________ the current flowing after the motor reaches its normal running speed. (a) nearly equal to (b) exactly equal to (c) less than (d) much greater than

Last Answer : Ans:(d)

The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Description : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Last Answer : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of ... `0^(@)C` is `1.7xx10^(-8) Omega` m.

A process electric heater is taking an hour to reach the desired temperature while operating at 440 V. It will take ------- hours to reach the same temperature if the supply voltage is reduced to 220 V. a) 2 b) 3 c) 4 d) 5

Description : A process electric heater is taking an hour to reach the desired temperature while operating at 440 V. It will take ------- hours to reach the same temperature if the supply voltage is reduced to 220 V. a) 2 b) 3 c) 4 d) 5

Last Answer : c) 4

How much is the required minimum power output of an international AM BC stations? A. 5 kW B. 30 kW C. 10 kW D. 50 kW

Description : How much is the required minimum power output of an international AM BC stations? A. 5 kW B. 30 kW C. 10 kW D. 50 kW

Last Answer : D. 50 kW

2. An electric oven of 2 kW power rating is operated in a domestic electric circuit (220 V) that has a current rating of 5 A. What result do you expect? Explain. -Physics-10

Description : 2. An electric oven of 2 kW power rating is operated in a domestic electric circuit (220 V) that has a current rating of 5 A. What result do you expect? Explain. -Physics-10

Last Answer : The current drawn by the electric oven can be calculated using the formula P = V × I I = P/V Substituting the values, we get I = 2000 W/220 V = 9.09 A The current drawn by the electric oven is 9.09 A which exceeds the safe limit of the circuit. This causes the fuse to melt and break the circuit.

Generators at a power station produce electric power at voltage A. 45 kW B. 50 kW C. 60 kW D. 25 kW

Description : Generators at a power station produce electric power at voltage A. 45 kW B. 50 kW C. 60 kW D. 25 kW

Last Answer : 25 kW

A 150 kW electric motor has an efficiency of 92 %, when it operates at full load. Calculate the losses in the...

Description : A 150 kW electric motor has an efficiency of 92 %, when it operates at full load. Calculate the losses in the machine.  (A) 92 kW (B) 150 kW (C) 163 kW (D) 13 kW 

Last Answer : efficiency  -output /input * 100 150/0.92----------163(input) losses-----(163--150)  ---------13kw.

Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Description : Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Last Answer : c. 6.81 KW

A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is (A) 3.53 kN (B) 33.3 kN (C) 35.3 kN (D) None of these

Description : A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is (A) 3.53 kN (B) 33.3 kN (C) 35.3 kN (D) None of these

Last Answer : Answer: Option C

A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Description : A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Last Answer : Answer: Option C

Which of the following liquids is not suitable for prolonged immersion of cobalt chrome partial dentures: A. Alkaline peroxidase B. Hypochlorite solutions C. Soap solutions D. Water

Description : Which of the following liquids is not suitable for prolonged immersion of cobalt chrome partial dentures: A. Alkaline peroxidase B. Hypochlorite solutions C. Soap solutions D. Water

Last Answer : B. Hypochlorite solutions

If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Description : If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Last Answer : Answer: B

Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Description : Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Last Answer : b. 163.5 KW

Which is a function of the voltage regulators used with AC generators? A. To cut out generators when they are no longer required. B. To cut in additional generators automatically as required. C. To divide the KW load equally between generators operating in parallel. D. To divide reactive current between generators operating in parallel.

Description : Which is a function of the voltage regulators used with AC generators? A. To cut out generators when they are no longer required. B. To cut in additional generators automatically as ... between generators operating in parallel. D. To divide reactive current between generators operating in parallel.

Last Answer : Answer: D

. Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Last Answer : (A) kW. sec/kg

The formula for tension difference or effective pull, required to transmit the load at.... (a) (Tt-Ts)=1000(kw/V) (b) Tt/Ts=c^ke (c) (Tt-Ts)= 1000(Hp/V) (d) None of the above

Description : The formula for tension difference or effective pull, required to transmit the load at.... (a) (Tt-Ts)=1000(kw/V) (b) Tt/Ts=c^ke (c) (Tt-Ts)= 1000(Hp/V) (d) None of the above

Last Answer : (a) (Tt-Ts)=1000(kw/V)

What cool things can I do with my new Chefman immersion blender?

Description : What cool things can I do with my new Chefman immersion blender?

Last Answer : answer:We have one. I like making creamy soups and sauces with it. Boil some chunks of squash. Once soft, drain the water. Add spices, butter, half & half. Then immersion blend the heck ... add half & half and grated Parmesan cheese. Blend thoroughly. Tomato cream sauce. Serve over cooked pasta.

Language immersion for children?

Description : Language immersion for children?

Last Answer : It isn't really immersion if they only meet for an hour a week? My daughter studied Indonesian in an immersion program and every class at school (except English) was studied in Indonesian until she ... were dedicated to studying. So it meant her peer group was very committed to their school work.

Having just received my first immersion blender, I am having problems. What have your experieces been?

Description : Having just received my first immersion blender, I am having problems. What have your experieces been?

Last Answer : I have had this same problem. You have to kinda angle it in, don’t hold it parallel with the bottom of the pot because it will pull down. (That is, the cutting surface should not be parallel, meaning the handle you are holding should not be quite perpendicular. Am I making sense?)

Do you own an immersion blender that you would recommend?

Description : Do you own an immersion blender that you would recommend?

Last Answer : I have a 200 watt Braun model that I bought 5 or 6 years ago- it's similar to this one but only came with a jar and no other attachments. I love it and use it all the time. it is a snap to ... at the press of a button and stops as soon as you stop pressing. I have never had a problem with it.

Spanish Immersion Programs?

Description : Spanish Immersion Programs?

Last Answer : I have not done an immersion program- but wouldn’t it be defeating the purpose to bring along an english speaking partner?

Any recommendations for a good Spanish-language immersion program?

Description : Any recommendations for a good Spanish-language immersion program?

Last Answer : montana linda in costa rica.

What is cross culture immersion?

Description : What is cross culture immersion?

Last Answer : The experience of being a member of a cultural minority while surrounded by a majority culture

What is immersion theory and submersion theory?

Description : What is immersion theory and submersion theory?

Last Answer : Need answer

How do Bamix immersion blenders compare to other blenders?

Description : How do Bamix immersion blenders compare to other blenders?

Last Answer : Bamix is a highly respected company in Switzerland. The immersion blender is a small, hand-held appliance which can do the job of a large blender. It can mix a tiny amount or a large amount with equal success.

Does the Bamix Immersion Blender come with a warranty.?

Description : Does the Bamix Immersion Blender come with a warranty.?

Last Answer : The Bamix products have a ten year warranty. To recieve the warranty you must have proof of purchase, send a letter stating what is wrong with the product, it must not have been misused and you have to pre-pay for all postage, sending and returning.

Which of the-following opportunities does cross-cultural immersion present?

Description : Which of the-following opportunities does cross-cultural immersion present?

Last Answer : All of the above

The buoyant force acting on a floating body is dependent on the (A) Viscosity of the liquid (B) Weight of the liquid displaced (C) Depth of immersion of the body (D) Surface tension of the liquid

Description : The buoyant force acting on a floating body is dependent on the (A) Viscosity of the liquid (B) Weight of the liquid displaced (C) Depth of immersion of the body (D) Surface tension of the liquid

Last Answer : (B) Weight of the liquid displaced

Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option C

Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option B

Mach number is significant in (A) Supersonics, as with projectiles and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity force, and wave making effects, as with ship's hulls (D) All of the above

Description : Mach number is significant in (A) Supersonics, as with projectiles and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through ... gravity force, and wave making effects, as with ship's hulls (D) All of the above

Last Answer : Answer: Option A

Intimate contact occurs between the food or package and the refrigerant with ____ freezing. a. blast c. cold b. pressure d. immersion

Description : Intimate contact occurs between the food or package and the refrigerant with ____ freezing. a. blast c. cold b. pressure d. immersion

Last Answer : d. immersion

A vessel is equipped with two ship's service generators. Generator #1 is rated at 900 kw and generator #2 is rated at 600 kw. During parallel operation, with a hotel load of 1,000 kw, what should be the kw load on generator #2? A. 100 kw B. 400 kw C. 500 kw D. 600 kw

Description : A vessel is equipped with two ship's service generators. Generator #1 is rated at 900 kw and generator #2 is rated at 600 kw. During parallel operation, with a hotel load of 1,000 kw, what should be the kw load on generator #2? A. 100 kw B. 400 kw C. 500 kw D. 600 kw

Last Answer : Answer: B

If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Description : If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Last Answer : C. 100 μV/m

A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of rigidity is 80 GPa. The outside diameter (in mm) of the shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100

Description : A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of ... shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100

Last Answer : (a) 43 to 45

A 3-phase, 400 votts, 50 Hz, 100 KW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Description : A 3-phase, 400 votts, 50 Hz, 100 KW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Last Answer : Ans: B N = NS (1-S) and NS =120 f / p =120 x 50 /4 = 1500 rpm ∴N= 1500 (1-0.02) =1470 rpm

The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase....

Description : The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase. The disruptive critical voltage is (A) 40 kV (B) 43.6 kV (C) 49.6 kV (D) 50 kV

Last Answer : The corona loss of a 3-phase transmission line is 100 kW at 60 kV/phase and 25 kW at 50 kV/phase. The disruptive critical voltage is 40 kV

A 3 phase, 400 volts, 50 Hz, 100 kW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a...

Description : A 3 phase, 400 volts, 50 Hz, 100 kW, 4 pole squirrel cage induction motor with a rated slip of 2% will have a rotor speed of: (A) 1500 rpm (B) 1470 rpm (C) 1530 rpm (D) 1570 rpm

Last Answer : 1470rpm