Most commonly used crude heater before the fractionation tower in a refinery is the __________ heater. (A) Electric immersion (B) Pipestill (C) Steam coil (D) None of these

Most commonly used crude heater before the fractionation tower in a
refinery is the __________ heater.
(A) Electric immersion
(B) Pipestill
(C) Steam coil
(D) None of these
by

1 Answer

Answer :

(B) Pipestill
by

Related questions

An electric immersion heater of `1.08 kW` is immersed in water . After it has reaches a temperature of `100^(@)C` , how much time will be required to

Description : An electric immersion heater of `1.08 kW` is immersed in water . After it has reaches a temperature of `100^(@)C` , how much time will be required to

Last Answer : An electric immersion heater of `1.08 kW` is immersed in water . After it has reaches a temperature of `100^(@)C` ... 50 s B. 420 s C. 105 s D. 105 s

In a refinery petroleum crude is fractionated into gas fraction, light ends, intermediate distillates, heavy distillates, residues and by products. The group of products including gas oil, diesel oil and heavy fuel oil belongs to the fraction (A) Heavy distillates (B) Intermediate distillates (C) Light ends (D) Residues

Description : In a refinery petroleum crude is fractionated into gas fraction, light ends, intermediate distillates, heavy distillates, residues and by products. The group of products including gas oil, diesel oil and ... the fraction (A) Heavy distillates (B) Intermediate distillates (C) Light ends (D) Residues

Last Answer : (A) Heavy distillates

The first crude oil refinery of India is located at (A) Naharkatiya (B) Digboi (C) Kochi (D) Madras

Description : The first crude oil refinery of India is located at (A) Naharkatiya (B) Digboi (C) Kochi (D) Madras

Last Answer : (B) Digboi

Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Last Answer : (B) 3

Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Description : Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Last Answer : (B) 30-80

Where can I purchase a immersion heater?

Description : Where can I purchase a immersion heater?

Last Answer : YOu can purchse an immersion heater by going to the following website http://www.chromalox.com/productcatalog/Industrial+Heaters/Immersion+Heaters/product-family-router.aspx?f=83

An immersion heater of 400 watts kept on for 5 hours will consume electrical power of a. 2KWh b. 20KWh c. 6KWh d. 12KWh

Description : An immersion heater of 400 watts kept on for 5 hours will consume electrical power of a. 2KWh b. 20KWh c. 6KWh d. 12KWh

Last Answer : a. 2KWh

Oxygen is produced by fractionation of air using __________ process. (A) Linde's (B) Claude's (C) Either (A) or (B) (D) None of these

Description : Oxygen is produced by fractionation of air using __________ process. (A) Linde's (B) Claude's (C) Either (A) or (B) (D) None of these

Last Answer : (C) Either (A) or (B)

What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : (4) Nichrome Explanation: Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire. Patented in 1905, it is the oldest documented form of resistance heating ... is corrosion-resistant, and has a high melting point of about 1400 degree C (2552 degree F).

What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : Nichrome

Fertiliser plants get their N2 requirements (A) By fractionation of liquefied air (B) By dissociating oxides of nitrogen (C) From coal gas (coke oven gas) (D) From producer gas

Description : Fertiliser plants get their N2 requirements (A) By fractionation of liquefied air (B) By dissociating oxides of nitrogen (C) From coal gas (coke oven gas) (D) From producer gas

Last Answer : (A) By fractionation of liquefied air

The pollutants that are present depend on __________ building material, as well. • Cooling tower • Water tower • Steam tower • Fire tower

Description : The pollutants that are present depend on __________ building material, as well. • Cooling tower • Water tower • Steam tower • Fire tower

Last Answer : cooling water

A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Description : A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Last Answer : c. Steam boiler

. __________ is not an important refinery process for upgrading the quality of lubricating oil.(A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Description : . __________ is not an important refinery process for upgrading the quality of lubricating oil. (A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Last Answer : (A) Deoiling

Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Description : Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Last Answer : (B) 30 to 80

Tray spacing in a distillation column of dia 10-12 ft. used in petroleum refinery may be around __________ inches. (A) 5 (B) 30 (C) 60 (D) 100

Description : Tray spacing in a distillation column of dia 10-12 ft. used in petroleum refinery may be around __________ inches. (A) 5 (B) 30 (C) 60 (D) 100

Last Answer : (B) 30

A student coming out cell fractionation of a tissue and forgot to label his tubes. The contents of one tube when studied showed organelles bounded by

Description : A student coming out cell fractionation of a tissue and forgot to label his tubes. The contents of one tube when studied showed organelles bounded by

Last Answer : A student coming out cell fractionation of a tissue and forgot to label his tubes. The contents of ... . SER B. Chloroplast C. Lysosome D. Perosisome

The process by which the amount of DNA, RNA and protein can be known at a time is: (a) Cell fractionation (b) Autoradiography (c) Phase-contrast microscopy (d) Tissue culture

Description : The process by which the amount of DNA, RNA and protein can be known at a time is: (a) Cell fractionation (b) Autoradiography (c) Phase-contrast microscopy (d) Tissue culture

Last Answer : Ans. ((b))

How may cells be disrupted in order to obtain subcellular organelles by centrifugal fractionation?

Description : How may cells be disrupted in order to obtain subcellular organelles by centrifugal fractionation?

Last Answer : There are several ways of disrupting cells: 1. Osmotic lysis. The plasma membranes of cells are water-permeable but are impermeable to large molecules and some ions. Thus if cells are placed ... cause microcavitation in the sample, and this disrupts the cell membranes, usually in a few seconds.

The rupture and fractionation do not usually occur in the water column in vessel/tracheids during the ascent of sap because of (a) weak gravitational pull (b) transpiration pull (c) lignified thick walls (d) cohesion and adhesion

Description : The rupture and fractionation do not usually occur in the water column in vessel/tracheids during the ascent of sap because of (a) weak gravitational pull (b) transpiration pull (c) lignified thick walls (d) cohesion and adhesion

Last Answer : (d) cohesion and adhesion.

Isolation of cellular components to determine their chemical composition is called (A) Cell differentiation (B) Chromatography (C) Cell fractionation (D) All of these

Description : Isolation of cellular components to determine their chemical composition is called (A) Cell differentiation (B) Chromatography (C) Cell fractionation (D) All of these

Last Answer : (C) Cell fractionation

What is the best way to control an oversized, horizontally oriented shell and tube steam heater? What is the best way to control an oversized, horizontally oriented shell and tube steam heater?

Last Answer : A used shell and tube heat exchanger is to be used in steam heating duty. The heat exchanger is larger than necessary and the control scheme to be employed is being investigated. The steam to ... choked flow does not exceed what is needed. This is tricky and requires several trim size change outs.

A 1250 W heater operates at `115V`. What is the resistance of the heating coil?

Description : A 1250 W heater operates at `115V`. What is the resistance of the heating coil?

Last Answer : A 1250 W heater operates at `115V`. What is the resistance of the heating coil? A. `1.6Omega` B. `13.5Omega` C. `1250Omega` D. `10.6Omega`

Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Description : Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Last Answer : (3) Radiation and convection only Explanation: Conduction is the transfer of heat energy by direct contact, convection is the movement of heat by actual motion of matter; radiation is the transfer of energy with the help of electromagnetic waves.

The schematic diagram shown in the illustration uses symbol 'A' to represent a/an _________. EL-0011 A. non-renewable fuse link B. circuit breaker coil C. overload relay coil D. thermal overload heater

Description : The schematic diagram shown in the illustration uses symbol 'A' to represent a/an _________. EL-0011 A. non-renewable fuse link B. circuit breaker coil C. overload relay coil D. thermal overload heater

Last Answer : Answer: D

The 'safe switch' of the winch controller shown in the illustration is operated _______________. EL-0102 A. through the master switch handle B. when heater circuit current is high C. by contactor coil 'FR' D. manually by the winch operator

Description : The 'safe switch' of the winch controller shown in the illustration is operated _______________. EL-0102 A. through the master switch handle B. when heater circuit current is high C. by contactor coil 'FR' D. manually by the winch operator

Last Answer : Answer: D

A loud buzzing noise in an AC controller is probably caused by _____________. A. poor contact with the overload relay B. an incorrectly sized heater C. a broken shading coil D. abnormal starting current

Description : A loud buzzing noise in an AC controller is probably caused by _____________. A. poor contact with the overload relay B. an incorrectly sized heater C. a broken shading coil D. abnormal starting current

Last Answer : Answer: C

If the length of a heater coil is reduced by 10% of its original length, then Power consumed by heater will? A. Increase over 10% B. Decrease by 10% (Answer) C. Decrease by 0.5% D. Increase by 0.5%

Description : If the length of a heater coil is reduced by 10% of its original length, then Power consumed by heater will? A. Increase over 10% B. Decrease by 10% (Answer) C. Decrease by 0.5% D. Increase by 0.5%

Last Answer : B. Decrease by 10% (Answer)

A nichrome wire used as heater coil has the resistance of 1 ohm/m. For ...

Description : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 

Last Answer : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 40 m.

When current flows through heater coil it glows but supply wiring does not glow because?

Description : When current flows through heater coil it glows but supply wiring does not glow because?

Last Answer : When current flows through heater coil it glows but supply wiring does not glow because resistance of heater coil is more than the supply wires.

The buoyant force acting on a floating body is dependent on the (A) Viscosity of the liquid (B) Weight of the liquid displaced (C) Depth of immersion of the body (D) Surface tension of the liquid

Description : The buoyant force acting on a floating body is dependent on the (A) Viscosity of the liquid (B) Weight of the liquid displaced (C) Depth of immersion of the body (D) Surface tension of the liquid

Last Answer : (B) Weight of the liquid displaced

Most of the centrifugal pumps used in chemical plants are usually __________ driven. (A) Steam (B) Diesel engine (C) Electric motor (D) Gas turbine

Description : Most of the centrifugal pumps used in chemical plants are usually __________ driven. (A) Steam (B) Diesel engine (C) Electric motor (D) Gas turbine

Last Answer : (C) Electric motor

State necessity of super heater in steam boilers. State advantages of economizer.

Description : State necessity of super heater in steam boilers. State advantages of economizer. 

Last Answer : Necessity of super heater in steam boilers: 1. The efficiency of the boiler is increase with the use of superheated steam. 2. It eliminates the erosion of the turbine blades. 3. It reduces ... water. 5. This unit improves the overall efficiency of the boiler by reducing the fuel consumption. 

Write the functions of re-heater in steam plant.

Description : Write the functions of re-heater in steam plant.

Last Answer : Functions of re-heater:- In Re-heater temperature of exhausted steam from HP turbine is increased by passing exhausted steam again to boiler.

The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Last Answer : (B) 1-1.5

Crude oils containing more than __________ kg of total salts (expressed in terms of NaCl) per thousand barrel is called a 'salty crude'. (A) 1 (B) 5 (C) 15 (D) 25

Description : Crude oils containing more than __________ kg of total salts (expressed in terms of NaCl) per thousand barrel is called a 'salty crude'. (A) 1 (B) 5 (C) 15 (D) 25

Last Answer : (B) 5

Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Description : Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Last Answer : (C) Asphaltic

Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed

Description : Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed

Last Answer : (C) Paraffin

Crude petroleum oil is a __________ fuel. (A) Primary (B) Fossil (C) Both (A) & (B) (D) Secondary

Description : Crude petroleum oil is a __________ fuel. (A) Primary (B) Fossil (C) Both (A) & (B) (D) Secondary

Last Answer : (C) Both (A) & (B)

In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Description : In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Last Answer : (A) Sulphur increases

Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Description : Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Last Answer : (B) Centrifugal

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Description : Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Last Answer : (B) Naphthenic

Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Description : Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Last Answer : (D) 25

__________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Description : __________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Last Answer : (B) Naphthenic

A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Description : A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Last Answer : (A) 8

Crude topping column operates at __________ pressure. (A) Atmospheric (B) 10 atm

Description : Crude topping column operates at __________ pressure. (A) Atmospheric (B) 10 atm

Last Answer : (A) Atmospheric

__________ chloride present in crude petroleum as impurity is the most prolific producer of HCl during distillation. (A) Magnesium (B) Potassium (C) Calcium (D) Sodium

Description : __________ chloride present in crude petroleum as impurity is the most prolific producer of HCl during distillation. (A) Magnesium (B) Potassium (C) Calcium (D) Sodium

Last Answer : (A) Magnesium

Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) Oleophobic

Sour crude means the __________ bearing crude. (A) Asphalt (B) Sulphur compounds (C) Wax (D) Nitrogen compounds

Description : Sour crude means the __________ bearing crude. (A) Asphalt (B) Sulphur compounds (C) Wax (D) Nitrogen compounds

Last Answer : (B) Sulphur compounds