The final product (B) is:

The final product (B) is:
by

1 Answer

Answer :

The final product (B) is: A. B. C. D.
by
selected by

Related questions

Can you say the items that were slated to be put together to save lives are not the final product, therefore it's ok to destruct them?

Description : Can you say the items that were slated to be put together to save lives are not the final product, therefore it's ok to destruct them?

Last Answer : Why do I have the feeling that this is somehow about abortion? (PS The word is “destroy” not “destruct.”)

The final product of the Calvin cycle used to produce glucose is?

Description : The final product of the Calvin cycle used to produce glucose is?

Last Answer : The final product of one turn of Calvin cycle is 2 molecules ofglyceraldehyde-3-phosphate (G3P) molecules. For each G3Psynthesized, the cycle spends nine molecules of ATP and sixmolecules of NADPH2. The light reactions sustain the Calvin cycleby regenerating the ATP and NADPH2.

Identify molecular weight of final product (Y).

Description : Identify molecular weight of final product (Y).

Last Answer : Identify molecular weight of final product (Y).

The structure of the final product (Y) formed in the following sequence is:

Description : The structure of the final product (Y) formed in the following sequence is:

Last Answer : The structure of the final product (Y) formed in the following sequence is: A. B. C. D.

How many N atom are present in final product `overset(Sn//HCl)rarr overset(NaNO_(2)//HCl)rarr overset(H_(3)PO_(2))rarr` Final product.

Description : How many N atom are present in final product `overset(Sn//HCl)rarr overset(NaNO_(2)//HCl)rarr overset(H_(3)PO_(2))rarr` Final product.

Last Answer : How many N atom are present in final product `overset(Sn//HCl)rarr overset(NaNO_(2)//HCl)rarr overset(H_(3)PO_(2))rarr` Final product.

Para toluidine is treated with `HNO_(2)` at ice cold conditions and then boiled with water. The final product obtained is :

Description : Para toluidine is treated with `HNO_(2)` at ice cold conditions and then boiled with water. The final product obtained is :

Last Answer : Para toluidine is treated with `HNO_(2)` at ice cold conditions and then boiled with water. The final ... acid B. p-cresol C. toluic acid D. phenol

The final product C, obtained in this reaction

Description : The final product C, obtained in this reaction

Last Answer : The final product C, obtained in this reaction A. B. C. D.

Identify the final product in the following sequence of reaction.

Description : Identify the final product in the following sequence of reaction.

Last Answer : Identify the final product in the following sequence of reaction. A. B. C. D.

In the following reaction final product is : `C_(6)H_(5)MgBr +CO_(2) overset("Ether")to overset(H^(o+))to` find product

Description : In the following reaction final product is : `C_(6)H_(5)MgBr +CO_(2) overset("Ether")to overset(H^(o+))to` find product

Last Answer : In the following reaction final product is : `C_(6)H_(5)MgBr +CO_(2) overset("Ether")to ... A. Benzoic acid B. Benzaldehyde C. Benzamide D. Benzene

The final product obtained on hydrolysis of `PCl_(5)` is

Description : The final product obtained on hydrolysis of `PCl_(5)` is

Last Answer : The final product obtained on hydrolysis of `PCl_(5)` is A. `H_(3)PO_(4)` B. `H_(3)PO_(3)` C. `POCl_(3)` D. `PH_(3)`

Identify the final product in the following sequence of reaction.

Description : Identify the final product in the following sequence of reaction.

Last Answer : Identify the final product in the following sequence of reaction. A. B. C. D.

In the following reaction final product is : `C_(6)H_(5)MgBr +CO_(2) overset("Ether")to overset(H^(o+))to` find product

Description : In the following reaction final product is : `C_(6)H_(5)MgBr +CO_(2) overset("Ether")to overset(H^(o+))to` find product

Last Answer : In the following reaction final product is : `C_(6)H_(5)MgBr +CO_(2) overset("Ether")to ... A. Benzoic acid B. Benzaldehyde C. Benzamide D. Benzene

The final product obtained on hydrolysis of `PCl_(5)` is

Description : The final product obtained on hydrolysis of `PCl_(5)` is

Last Answer : The final product obtained on hydrolysis of `PCl_(5)` is A. `H_(3)PO_(4)` B. `H_(3)PO_(3)` C. `POCl_(3)` D. `PH_(3)`

The oxidation state of chrominium in the final product formed in the reaction between `KI` and acidified potassium dichromate soluttion is

Description : The oxidation state of chrominium in the final product formed in the reaction between `KI` and acidified potassium dichromate soluttion is

Last Answer : The oxidation state of chrominium in the final product formed in the reaction between `KI` and acidified potassium dichromate ... `+6` C. `+2` D. `+3`

Frame the formula: final velocity (v) of a body in linear motion is equal to the sum of its initial velocity (u) and the product of acceleration (a) a

Description : Frame the formula: final velocity (v) of a body in linear motion is equal to the sum of its initial velocity (u) and the product of acceleration (a) a

Last Answer : Frame the formula: final velocity (v) of a body in linear motion is equal to the sum of its initial velocity (u) and ... v=u-at C. v=u+at D. v=-u-at

Identify final product of following sequence of reaction:

Description : Identify final product of following sequence of reaction:

Last Answer : Identify final product of following sequence of reaction: A. B. C. D.

What would be the final product of reaction?

Description : What would be the final product of reaction?

Last Answer : What would be the final product of reaction? A. B. C. D.

Consider the following sequence of reaction: The final product is:

Description : Consider the following sequence of reaction: The final product is:

Last Answer : Consider the following sequence of reaction: The final product is: A. B. C. D.

Identify the final product of following reaction:

Description : Identify the final product of following reaction:

Last Answer : Identify the final product of following reaction: A. B. C. D.

The final product B obtained in the reaction is:

Description : The final product B obtained in the reaction is:

Last Answer : The final product B obtained in the reaction is: A. B. `(H_(2)C = CH)_(2)` C. `H_(3)C-CH=CH-CH_(2)` D.

The final product is:

Description : The final product is:

Last Answer : The final product is: A. B. C. D.

The final major product of the reaction is: `Ph-overset(OH)overset(|)underset(Ph)underset(|)(C)-underset(" "NH_(2))underset(|)(CH)-CH_(3)overset(NaNO_

Description : The final major product of the reaction is: `Ph-overset(OH)overset(|)underset(Ph)underset(|)(C)-underset(" "NH_(2))underset(|)(CH)-CH_(3)overset(NaNO_

Last Answer : The final major product of the reaction is: `Ph-overset(OH)overset(|)underset(Ph)underset(|)(C)-underset(" " ... (" "CH_(3))underset(|)(C)-CH_(3)`

The final product (B) is:

Description : The final product (B) is:

Last Answer : The final product (B) is: A. B. C. D.

The final product (Y) is:

Description : The final product (Y) is:

Last Answer : The final product (Y) is: A. B. C. D.

final product B is:

Description : final product B is:

Last Answer : final product B is: A. B. C. D.

What is the final product obtained when chlorine reacts with ethyl alcohol in KOH ?

Description : What is the final product obtained when chlorine reacts with ethyl alcohol in KOH ?

Last Answer : What is the final product obtained when chlorine reacts with ethyl alcohol in KOH ? A. `CHCl_(3)` B. `C Cl_(3) CHO` C. `CH_(3)Cl` D. none

Is the sum of a partial product equal to the final answer?

Description : Is the sum of a partial product equal to the final answer?

Last Answer : No, it could be a partial sum.

Final product of Glycolysis

Description : Final product of Glycolysis

Last Answer : Ans. Pyruvate

Final product of C3 pathway is

Description : Final product of C3 pathway is

Last Answer : Ans. 3 PGA

Gross National Product is the money measure of - (1) all tangible goods produced in a country (2) final goods and services produced in the economy (3) services generated annually in the economy (4) all tangible goods available in the economy

Description : Gross National Product is the money measure of - (1) all tangible goods produced in a country (2) final goods and services produced in the economy (3) services generated annually in the economy (4) all tangible goods available in the economy

Last Answer : (2) final goods and services produced in the economy Explanation: Gross national product (GNP) is the market value of all products and services produced in one year by labour and property supplied ... (including income of those located abroad), minus income of non-residents located in that country.

In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Low final boiling point product

Final product of uranium extraction plant at Jadugoda (Bihar) is (A) Uranium (B) Uranium oxide (C) Uranium carbide (D) Magnesium diuranate

Description : Final product of uranium extraction plant at Jadugoda (Bihar) is (A) Uranium (B) Uranium oxide (C) Uranium carbide (D) Magnesium diuranate

Last Answer : (D) Magnesium diuranate

In case of a hammer crusher, the final product size depends on the (A) Feed rate (B) Rotor speed(C) Clearance between hammer & grinding plates(D) All (A), (B) and (C

Description : In case of a hammer crusher, the final product size depends on the (A) Feed rate (B) Rotor speed (C) Clearance between hammer & grinding plates (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

The main differentiation factor between tube mill and ball mill is the (A) Length to diameter ratio (B) Size of the grinding media (C) Final product size (D) Operating speed

Description : The main differentiation factor between tube mill and ball mill is the (A) Length to diameter ratio (B) Size of the grinding media (C) Final product size (D) Operating speed

Last Answer : (A) Length to diameter ratio

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

Project closure involves releasing the final product to the customer, handing over the project documentation, manuals, source code, and network layouts. (True/False)

Description : Project closure involves releasing the final product to the customer, handing over the  project documentation, manuals, source code, and network layouts. (True/False)

Last Answer : Ans. True

Problems with using Lines of Code to measure the size of a product include(s) a) The creation of source code is only part of the development effort b) The Lines of Code (LOC) will differ between languages and cannot bemeasured for some languages c) Should comments, data definitions etc (i.e. non-executable LOC) be includedas well? D) The final size (kLOC) can only be determined once the product is delivered e) All of the above.

Description : Problems with using Lines of Code to measure the size of a product include(s) a) The creation of source code is only part of the development effort b) The Lines of Code (LOC) will differ between ... The final size (kLOC) can only be determined once the product is delivered e) All of the above.

Last Answer : e) All of the above.

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

___________ is the process of recreating a design by analyzing a final product. a. Forward Engineering b. Reverse Engineering c Backward Engineering d. None of the above.

Description : ___________ is the process of recreating a design by analyzing a final product. a. Forward Engineering b. Reverse Engineering c Backward Engineering d. None of the above.

Last Answer : a. Forward Engineering

...................... is the process of recreating a design by analyzing a final product. A) Forward Engineering B) Reverse Engineering C) Backward Engineering D) None of the above

Description : ...................... is the process of recreating a design by analyzing a final product. A) Forward Engineering B) Reverse Engineering C) Backward Engineering D) None of the above

Last Answer : B) Reverse Engineering

Which of the following statements is a wrong statement under Value Chains ? A. Technology development is a support activity B. Marketing & Sales is a support activity C. Operations are primary activities that transforms Inputs into Final Product or Service D. Procurement is a support activity which deals with Vendors

Description : Which of the following statements is a wrong statement under Value Chains ? A. Technology development is a support activity B. Marketing & Sales is a support activity C. Operations are ... Inputs into Final Product or Service D. Procurement is a support activity which deals with Vendors

Last Answer : Marketing & Sales is a support activity

Items that are purchased routinely, do not become part of the final physical product, and are treated like expense items rather than capital goods are called 1. raw materials 2. major equipment 3. accessory equipment 4. component part 5. process materials

Description : Items that are purchased routinely, do not become part of the final physical product, and are treated like expense items rather than capital goods are called 1. raw materials 2. major equipment 3. accessory equipment 4. component part 5. process materials

Last Answer : accessory equipment

In fermentation, the conversion of pyruvate into a final end product is critical for the production of a. CO2. b. glucosec. NAD. d. 02.

Description : In fermentation, the conversion of pyruvate into a final end product is critical for the production of a. CO2. b. glucose c. NAD. d. 02.

Last Answer : a. CO2.

Which device can produce the final product of machine processing into a form usable by humans: a) Storage b) Input Device c) Output Device d) None of The Above

Description : Which device can produce the final product of machine processing into a form usable by humans: a) Storage b) Input Device c) Output Device d) None of The Above

Last Answer : c) Output Device

The output of problem definition stage is …………….. A) Master Development Plan B) Terms of reference C) Feasibility report D) Final product

Description : The output of problem definition stage is …………….. A) Master Development Plan B) Terms of reference C) Feasibility report D) Final product

Last Answer : B) Terms of reference

Pricing policies and methods A)help direct and structure the selection of a final price. B)are the last decisions made for a new product. C)are the same for all of a company's products. D)are the most important decisions made for a product.

Description : Pricing policies and methods A)help direct and structure the selection of a final price. B)are the last decisions made for a new product. C)are the same for all of a company's products. D)are the most important decisions made for a product.

Last Answer : A)help direct and structure the selection of a final price.

The last people to adopt a new product and who tend to be suspicious of new products are called: A)late adopters B)laggards C)late majority D)final targets

Description : The last people to adopt a new product and who tend to be suspicious of new products are called: A)late adopters B)laggards C)late majority D)final targets

Last Answer : B)laggards

The major functions of SHS Wholesale include all of the following EXCEPT A)selling to the final consumer. B)warehousing, shipping, and product handling. C)financing and budgeting. D)marketing research and information systems. E)inventory control and data processing.

Description : The major functions of SHS Wholesale include all of the following EXCEPT A)selling to the final consumer. B)warehousing, shipping, and product handling. C)financing and budgeting. D)marketing research and information systems. E)inventory control and data processing.

Last Answer : A)selling to the final consumer.

Products that are used directly in the production of a final product but are not easily identifiable are categorised as A)accessory products. B)component parts. C)consumable supplies. D)assembly components. E)process materials

Description : Products that are used directly in the production of a final product but are not easily identifiable are categorised as A)accessory products. B)component parts. C)consumable supplies. D)assembly components. E)process materials

Last Answer : E)process materials

Items that are purchased routinely, do not become part of the final physical product, and are treated like expense items rather than capital goods are called A)raw materials. B)major equipment. C)accessory equipment. D)component parts. E)process materials.

Description : Items that are purchased routinely, do not become part of the final physical product, and are treated like expense items rather than capital goods are called A)raw materials. B)major equipment. C)accessory equipment. D)component parts. E)process materials.

Last Answer : C)accessory equipment.