Description : (i) Debtors A/c shows ____________ balance.
Last Answer : Fill in the blanks : (i) Debtors A/c shows ____________ balance. (ii) ____________ is ... /d (brought down) balance indicates ______\_____ balance.
Description : Has anyone else noticed how increasingly difficult it is to find quality parts, fixtures, tools or anything else at places like Home Depot?
Last Answer : answer:Yes. Supply and demand, and we seem to be in an era where the upfront cheapest price wins. I'm disgusted with how manufacturers with a reputation for quality products, like John Deere, create a cheap ... in the big box stores. I wonder if the practice will bite them in the butt in long run.
Description : What gauge wire to use in rewiring antique light fixtures?
Last Answer : Don’t forget that you are limited by the structure of the fixture as to how large a gauge you can use. I would use the absolute largest gauge that will work with any particular fixture to reduce the chances of resistance-built heat.
Description : Just how do those dead bugs always find their way into my sealed light fixtures?
Last Answer : answer:Be careful, AC. Sometimes they are not dead. One time we were renting a house that had a miniature version of the house in the backyard as a playhouse. My husband noticed that the ... of spiders, it was rather horrifying seeing them sticking their legs out of the dirt and standing up!
Description : A decorative framework to conceal curtain fixtures at the top of a window casing. -Do You Know?
Last Answer : The cornice juts away from the building enough that the rainwater flows away from the building. Not just for buildings, the word cornice can also describe raised decorative molding right under the ceiling in a room or a similar decorative topping that crowns some windows to hide curtain rods.
Description : What type of light fixtures creates compromises in the heated envelope of the house?
Last Answer : Exterior light fixtures can be a big problem because they maypenetrate the air barrier, which compromises the heated envelope ofthe light house. However, the worst fixture is a recessed lightthat penetrates an attic.
Description : What is the difference between traditional and modern bathroom fixtures?
Last Answer : I think that the shapes and colors used is one of the major differences between the two eras. Traditional has a lot of earth tones and rounded shpes found in nature while modern tends to be more crome/black in color with sharp edges.
Description : Shower Fixtures ?
Last Answer : form_title= Shower Fixtures form_header= Install new fixtures in your home What finish do you want on your fixtures?*= _ [50] Do you need to remove existing fixtures?*= () Yes () No What type of shower do you have?*= _ [50]
Description : Where can I buy fluorescent light fixtures?
Last Answer : Fluorescent light fixtures can be purchases at a wide variety of outlets, including your local office supply, electronics stores, and numerous venues online. Amazon offers very competitive prices for office lighting fixtures.
Description : Saving with Used Plumbing Fixtures?
Last Answer : Plumbing fixtures can be one of the most expensive parts of renovating a home plumbing system. One excellent way to save on plumbing fixture costs is by purchasing used plumbing fixtures. Plumbing ... plumbing fixtures with used commercial fixtures is a unique and cost effective way to save money.
Description : What kind of light fixtures should I have for my home office?
Last Answer : It would really depend on what type of work you are doing. You need enough light to illuminate your work. A desk lamp would probably not provide enough light by itself.
Description : Can I use fluorescent light fixtures outdoors?
Last Answer : You can use compact fluorescent lights indoors or outdoors. The only problem is if the connection between bulb and light socket gets wet, but this is the case with any bulb and fixture so outdoor lights are designed to keep it dry.
Description : Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse
Last Answer : Answer: A
Description : Which from the following is NOT a tangible element? (A) Fixtures (B) Trademarks (C) Monetary assets (D) Stockholder equity
Last Answer : (B) Trademarks
Description : . Presence of iron and manganese in water causes (A) Reduction in its dissolved oxygen content (B) Discoloration of bathroom fixtures (C) Temporary hardness (D) None of these
Last Answer : (B) Discoloration of bathroom fixtures
Description : “Composite sleeper index” is employed to determine a) sleeper density requirement b) number of fixtures required for a particular type of sleeper c) durability of sleeper d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*
Last Answer : d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*
Description : Enlist and draw various fixtures and fastenings for doors and windows.
Last Answer : Types of Fixtures and Fastenings for Doors and Windows Hinges Hinge is fixture which helps the door to rotate freely along its axis. There are so many types of hinges are there which are as ... them are padlock, mortise lock, rim lock, cupboard lock and lever handle lock etc.
Description : What is ejector? Explain role and necessity of ejector in the design of jigs and fixtures.
Last Answer : Ejector: Ejector is used to remove the work piece from close fitted locators and is present behind the work piece. Ejector speed up the operation by reducing unloading time. This increases the ... [6] The combined mechanism used in Ejectors can be powered hydraulically or by compressed air.
Description : What are the different types of Fixtures? Explain any one with sketch.
Last Answer : Types of Fixtures: Following are the types of Fixtures according to the type of machine operations for which they are used. [1] Lathe (Turning) Fixture [2] Milling fixtures [3] Grinding ... relative to the tool of the machine table and guide the broaching tool in relation to the job.
Description : What is ejector? State its necessity in the design of jigs and fixtures.
Last Answer : Concept of ejector: A device, which is used to remove the work piece from the machine after completion of operation, is known as ejector. Necessity: In the design of jigs and fixture , ... been machined. Ejector speeds up the unloading of the work piece and thus increases the production rate.
Description : What is fool proofing of jigs and fixtures? State its importance.
Last Answer : Fool Proofing of Jigs and Fixtures: It can be defined as the incorporation of design feature in the jig or fixture that will make it possible to lead the work into jig and fixture, in an ... increases [3] Wrong positioning of the work piece is avoided [4] Loading and Unloading time reduces
Description : State different components of Jigs and Fixtures.
Last Answer : Different components of Jigs and Fixtures: 1. Body: It is a plate, box or frame type structure in which the components to be machined are loaded. It should be quite sturdy and rigid. ... in order to perform machining operations at different locations. In such case indexing elements are to be used.
Description : Differentiate between jigs and fixtures
Last Answer : Differentiate between jigs and fixtures
Description : Enlist general principles of jigs and fixtures
Last Answer : Principles of Jigs and Fixtures:- [1] Location Principle [2] Clamping and guiding Principle [3] Loading and unloading Principle [4] Motion Economy [5] Fool proofing [6] Rigidity [7] Clearance ... safety [14] Ejectors [15] Truninos [16] Inserts [17] Provision of coolant [18] Economy
Description : What were the most difficult parts of the CSET Test (Subtests II & III)?
Last Answer : answer:I found an article on a site that may be of interest. Even if this article doesn’t do it there are many more on this site! I tried… :) http://ezinearticles.com/?How-I-Passed-the-CSET....Little-Tips-and-Pointers-That-Made-the-Difference-Between-Pass-and-Failure&id=81315
Description : Which of the following combination of axial & equitorial bonds show Cis or Trans orientation in Dimethyl cyclohexane. (i) 1e, 2e (ii) 1e, 3e (iii) 1e,
Last Answer : Which of the following combination of axial & equitorial bonds show Cis or Trans orientation in Dimethyl cyclohexane. ... 3a (vi) 1e, 4a (vii) 1a, 3a
Description : . Which of the following is empirical estimation technique? (i) expert judgement (ii) Delphi estimation (iii) COCOMO (iv) Critical path Method A. only i, ii & iii B. only i & ii C. only i, iii & iv D. All of the above
Last Answer : B. only i & ii
Description : Choose the option that lists the set of statements that are NOT TRUE according to the poem. I. The tiger is in quiet rage because he has been imprisoned. II. A tiger is caged and kept in the zoo. III. He criticises the brilliant stars ... edge. (a) II & V (b) I, IV & V (c) I, II & III (d) III & V
Last Answer : (d) III & V
Description : E-marketing using online mass customisation is best describes as- a. customer co-relationships b. customer co-production c. customer co-ceating d. both (ii) & (iii)
Last Answer : d. both (ii) & (iii)
Description : Medicine technology have applications in the fields of i) Pharmacy ii) Prosthetics iii) Both A & B iv) None of these
Last Answer : iii) Both A & B
Description : ICT is used extensively in i) Wider access to learning and participation ii) Antisocial activities involving harassment of individuals iii) Flexibility to study where, when and how best suits individual needs and preferences iv) Both A & C
Last Answer : iv) Both A & C
Description : Teleconferencing can be helpful in i) Business Domain ii) Health Sector iii) Both A & B iv) None of these
Description : Bibliography given in a research report (i) Helps those interested in further research and studying the problem (ii) Makes the report authentic (iii) Both (i) & (ii) (iv) None of the above
Last Answer : (iii) Both (i) & (ii)
Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X ... . Which of the following is correct for neighbors? a) X, W b) R, X c) S, W d) P, S
Last Answer : Ans: option (d)
Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and ... R & Y are neighbors. Who is the only female in between X & R? a) Z b) P c) Y d) Q
Last Answer : Ans: option (c)
Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. ... a) S, Q, R, W b) P, Q, Y, W c) P, Q, R, W d) P, Q, R, S
Last Answer : b) P, Q, Y, W
Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X ... as well R & Y are neighbors. 10. Who is exactly opposite to X? a) Z b) P c) S d) W
Last Answer : Ans: option (a)
Description : Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a ... math computations. a) i & iii b) ii & iii c) iii only. d) i only.
Last Answer : c) iii only.
Description : Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the ... RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii
Last Answer : d) iii
Description : Spurious tuples may occur due to i. Bad normalization ii. Theta joins iii. Updating tables from join a) i& ii b) ii & iii c) i& iii d) ii & iii
Last Answer : a) i& ii b) ii & iii
Description : Regression testing should be performed: i. every week ii. after the software has changed iii. as often as possible iv. when the environment has changed v. when the project manager says a) i & ii are true, iii, iv & v are ... iv are true, i, iii & v are false d) ii is true, i, iii, iv & v are false
Last Answer : c) ii & iv are true, i, iii & v are false
Description : Consider the following statements: i. 100% statement coverage guarantees 100% branch coverage. ii. 100% branch coverage guarantees 100% statement coverage. iii. 100% branch coverage guarantees 100% decision coverage. iv. 100% decision ... & v are False d) ii, iii & iv are True; i & v are False
Last Answer : d) ii, iii & iv are True; i & v are False
Description : Which of the following(s) is/are found in Genetic Algorithms? (i) evolution (ii) selection (iii) reproduction (iv) mutation (a) i & ii only (b) i, ii & iii only (c) ii, iii & iv only
Last Answer : (a) i & ii only
Description : Which of the following functions is typically supported by a software quality information system? I. Record keeping II. System design III. Evaluation scheduling IV. Error reporting A.I, II&III B.II, III &IV C.I, III &IV D.I, II & IV
Last Answer : C.I, III &IV
Description : Which of the following two statements are true regarding application of Kaizen for energy conservation? i) Kaizen events are structured for reduction of only energywastes ii) Kaizen events engage workers in such a way so that they get ... energy use a) ii & iv b) i & iii c) iii & iv d) i & iv
Last Answer : a) ii & iv
Description : Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is ... upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii
Last Answer : d) i & ii
Description : Which of the following statements are true? i) reactive current is necessary to build up the flux for the magnetic field of inductive devices ii) some portion of reactive current is converted into work iii) the cosine of angle ... called power factor a) i & iv b) ii & iii c) i & iii d) iii & iv
Last Answer : a) i & iv
Description : Java Servlet i) is key component of server side java development ii) is a small pluggable extension to a server that enhances functionality iii) runs only in Windows Operating System iv) allows developers to customize any java ... & iv are true C) ii, iii & iv are true D) i, ii & iv are true
Last Answer : D) i, ii & iv are true
Description : break statement is used to i) get out of method ii) end aprogram iii) get out of a loop iv) get out of the system A) 1 & 2 B) 1,2 & 3 C) 1 & 3 D) 3
Last Answer : D) 3
Description : OOP features are i) Increasing productivity ii) Reusability iii) Decreasing maintenance cost iv) High vulnerability A) 1,2 & 4 B) 1,2 & 3
Last Answer : B) 1,2 & 3