Tertiary butyl amine is a-

Tertiary butyl amine is a-
by

1 Answer

Answer :

Tertiary butyl amine is a- A. `1^(@)` Amine B. `2^(@)` Amine C. `3^(@)` Amine D. Quaternary salt
by

Related questions

H2S is scrubbed from refinery gases by absorption using (A) Dilute H2SO4 (B) Ethanol amine (C) Chilled water (D) Tri-butyl phosphate

Description : H2S is scrubbed from refinery gases by absorption using (A) Dilute H2SO4 (B) Ethanol amine (C) Chilled water (D) Tri-butyl phosphate

Last Answer : (B) Ethanol amine

(A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl groups in tertiary butyl carbanion tends to mak

Description : (A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl groups in tertiary butyl carbanion tends to mak

Last Answer : (A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl ... IF (A) is incorrect but (R) is correct.

Tertiary butyl chloride preferably undergo hydrolysis by:

Description : Tertiary butyl chloride preferably undergo hydrolysis by:

Last Answer : Tertiary butyl chloride preferably undergo hydrolysis by: A. `S_(N^(1))` mechanism B. `S_(N^(2))` mechanism C. and of (a) and (b) D. none of these

When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is

Description : When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is

Last Answer : When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is A. oxidation B. reduction C. dehydration D. substitution

When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is

Description : When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is

Last Answer : When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is A. Ethylene B. Acetone C. Ether D. Acetaldehyde

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

Give 3 methods to distinguish primary amine from secondary and tertiary.

Description : Give 3 methods to distinguish primary amine from secondary and tertiary.

Last Answer : Give 3 methods to distinguish primary amine from secondary and tertiary.

The nitrogan atom in each of the following tertiary amines may be removed as trimethyl amine by repeated Hoffmann elimination. Which of the following

Description : The nitrogan atom in each of the following tertiary amines may be removed as trimethyl amine by repeated Hoffmann elimination. Which of the following

Last Answer : The nitrogan atom in each of the following tertiary amines may be removed as trimethyl amine by repeated Hoffmann ... to accomplish this? A. B. C. D.

Which type of amine produces N2 when treated with HONO? (a) Primary (b) Secondary (c) Tertiary (d) Quaternary

Description : Which type of amine produces N2 when treated with HONO? (a) Primary (b) Secondary (c) Tertiary (d) Quaternary

Last Answer : Primary

Assuming roughly equivalent molecular weights, which of the following would have the highest boiling point? (a) a tertiary amine (b) a quaternary ammonium salt (c) an alcohol (d) an ether

Description : Assuming roughly equivalent molecular weights, which of the following would have the highest boiling point? (a) a tertiary amine (b) a quaternary ammonium salt (c) an alcohol (d) an ether

Last Answer : a quaternary ammonium salt

Which of the following statements is False about acetamide? (a) reacts with Br2/NaOH to form tertiary amine (b) undergoes acid-hydrolysis to form acetic acid (c) undergoes dehydration with P2O5 to form a nitrile (d) is a white crystalline solid, soluble in water

Description : Which of the following statements is False about acetamide? (a) reacts with Br2/NaOH to form tertiary amine (b) undergoes acid-hydrolysis to form acetic acid (c) undergoes dehydration with P2O5 to form a nitrile (d) is a white crystalline solid, soluble in water

Last Answer : reacts with Br2/NaOH to form tertiary amine

Out of two anticholinesterases, drug ‘X’ is a tertiary amine while drug ‘Y’ is a quarternary ammonium compound. Then: A. Drug ‘X’ is likely to be more potent than ‘Y’ B. Drug ‘X’ will be more suitable to be used as a miotic C. Drug ‘Y’ will be completely metabolized in the body D. Drug ‘Y’ will produce CNS effects

Description : Out of two anticholinesterases, drug X' is a tertiary amine while drug Y' is a quarternary ammonium compound. Then: A. Drug X' is likely to be more potent than Y' B. Drug X' will be more ... a miotic C. Drug Y' will be completely metabolized in the body D. Drug Y' will produce CNS effects

Last Answer : B. Drug ‘X’ will be more suitable to be used as a miotic

Out of two anticholinesterases, drug ‘X’ is a tertiary amine while drug ‘Y’ is a quarternary ammonium compound. Then: A. Drug ‘X’ is likely to be more potent than ‘Y’ B. Drug ‘X’ will be more suitable to be used as a miotic C. Drug ‘Y’ will be completely metabolized in the body D. Drug ‘Y’ will produce CNS effects

Description : Out of two anticholinesterases, drug X' is a tertiary amine while drug Y' is a quarternary ammonium compound. Then: A. Drug X' is likely to be more potent than Y' B. Drug X' will be more ... a miotic C. Drug Y' will be completely metabolized in the body D. Drug Y' will produce CNS effects

Last Answer : B. Drug ‘X’ will be more suitable to be used as a miotic

What is the composition of zircon , monazite , butyl etc. ?

Description : What is the composition of zircon , monazite , butyl etc. ?

Last Answer : Black gold is made up of zircon , monazite , butyl etc.

The hyperconjugative stabilities of tert-butyl cation and `2`-butene, respectively, are due to

Description : The hyperconjugative stabilities of tert-butyl cation and `2`-butene, respectively, are due to

Last Answer : The hyperconjugative stabilities of tert-butyl cation and `2`-butene, respectively, are due to A ... and `sigma rarrpi^(**)` electron delocalizations

The major product obtained when tert- butyl bromide is heated with sodium ethoxide is

Description : The major product obtained when tert- butyl bromide is heated with sodium ethoxide is

Last Answer : The major product obtained when tert- butyl bromide is heated with sodium ethoxide is A. 2- ... Ehene C. tert- Buty1methy1ether D. Diethyl ether

Which of the following alkenes when passed through conc. `H_(2)SO_(4)` followed by hydrolysis with boiling water would give tert-butyl alcohol

Description : Which of the following alkenes when passed through conc. `H_(2)SO_(4)` followed by hydrolysis with boiling water would give tert-butyl alcohol

Last Answer : Which of the following alkenes when passed through conc. `H_(2)SO_(4)` followed by hydrolysis with ... B. Isobutylene C. Propylene D. But-1-ene

Wood spirit is – (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Description : Wood spirit is – (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Last Answer : (1) Methyl alcohol Explanation: Methanol is also known as methyl alcohol, wood alcohol, wood naphtha or wood spirits. It acquired the name "wood alcohol" because it was once produced ... is produced in a catalytic industrial process directly from carbon monoxide, carbon dioxide, and hydrogen.

lodex, a pain relief balm, has the smell of _______. (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Description : lodex, a pain relief balm, has the smell of _______. (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Last Answer : (1) Methyl salicylate Explanation: Iodex has the characteristic odour of Methyl salicylate, an organic ester naturally produced by many species of plants, particularly wintergreens. It is used in high ... as a rubefacient and analgesic in deep heating liniments to treat joint and muscular pain.

Which of the following rubbers has the widest service temperature range (-75 to 275°C)? (A) Butyl rubber (B) Silicon rubber (C) Nitrile rubber (D) Silicone rubber

Description : Which of the following rubbers has the widest service temperature range (-75 to 275°C)? (A) Butyl rubber (B) Silicon rubber (C) Nitrile rubber (D) Silicone rubber

Last Answer : (D) Silicone rubber

__________ is produced by polymerisation of chloroprene. (A) Thiokol (a polysulphide rubber) (B) Butyl rubber (C) Neoprene (D) Polyurethane rubber

Description : __________ is produced by polymerisation of chloroprene. (A) Thiokol (a polysulphide rubber) (B) Butyl rubber (C) Neoprene (D) Polyurethane rubber

Last Answer : (C) Neoprene

Buna-N is also called (A) Butyl rubber (B) Nitrile rubber (C) Neoprene (D) Thiokol

Description : Buna-N is also called (A) Butyl rubber (B) Nitrile rubber (C) Neoprene (D) Thiokol

Last Answer : (B) Nitrile rubber

Due to its excellent permeability to air/gas and oxidation resistance, the tubes of automobile tyres is made of(A) Cold SBR(B) Butyl rubber(C) Bunai N(D) Buna S

Description : Due to its excellent permeability to air/gas and oxidation resistance, the tubes of automobile tyres is made of (A) Cold SBR (B) Butyl rubber (C) Bunai N (D) Buna S

Last Answer : (B) Butyl rubber

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Description : Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Last Answer : (D) None of these

__________ is used as an 'entrainer' for the separation of acetic acid￾water mixture by distillation. (A) Furfural (B) Benzol (C) Butyl acetate (D) Hexane

Description : __________ is used as an 'entrainer' for the separation of acetic acid￾water mixture by distillation. (A) Furfural (B) Benzol (C) Butyl acetate (D) Hexane

Last Answer : (C) Butyl acetate

Di-tert butyl ether cannot be made by Williamson’s synthesis. Explain why ?

Description : Di-tert butyl ether cannot be made by Williamson’s synthesis. Explain why ?

Last Answer : Ans. To prepare di tert-butyl ether by Williamson's synthesis, we need tert-butyl bromide and Sodium tertiary butoxide. Since tert-butyl bromide being 3°-alkyl halide prefers to ... rather than substitution, therefore the product obtained is isobutylene rather than ditertiary butyl ether.

What is the main product obtained when vapours of t-butyl alcohol are passed over copper at 300° ?

Description : What is the main product obtained when vapours of t-butyl alcohol are passed over copper at 300° ?

Last Answer : Ans. Isobutylene (2-Methyl propene) 

From where is Butyl obtained; for the treatment of AIDS?

Description : From where is Butyl obtained; for the  treatment of AIDS?

Last Answer : Black mulberry

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

Which of the following esters produces butyric acid and phenol on hydrolysis? (a) Phenyl butyrate (b) Butyl benzoate (c) Benzyl propionate (d) Phenyl propionate

Description : Which of the following esters produces butyric acid and phenol on hydrolysis? (a) Phenyl butyrate (b) Butyl benzoate (c) Benzyl propionate (d) Phenyl propionate

Last Answer : Phenyl butyrate

Which of the following describes the side chain of Leucine? (a) ethyl group (b) isopropyl group (c) sec-butyl group (d) isobutyl group

Description : Which of the following describes the side chain of Leucine? (a) ethyl group (b) isopropyl group (c) sec-butyl group (d) isobutyl group

Last Answer : isobutyl group

n-Butyl bromide reacts with NaSH to give (a) CH3CH2CH2SH (b) CH3SCH3 (c) CH3CH2CH2CH2SH (d) CH3CH2SCH2CH3

Description : n-Butyl bromide reacts with NaSH to give (a) CH3CH2CH2SH (b) CH3SCH3 (c) CH3CH2CH2CH2SH (d) CH3CH2SCH2CH3

Last Answer : CH3CH2CH2CH2SH

Which of the following is sec-butyl alcohol? (a) CH3CH2CH2CH2OH (b) CH3CH(OH)CH2CH3 (c) (CH3)2CHCH2OH (d) (CH3)2CHOH

Description : Which of the following is sec-butyl alcohol? (a) CH3CH2CH2CH2OH (b) CH3CH(OH)CH2CH3 (c) (CH3)2CHCH2OH (d) (CH3)2CHOH

Last Answer : CH3CH(OH)CH2CH3

Hydroboration-oxidation of propene gives : (a) Isopropyl alcohol (b) n-Propyl alcohol (c) Isobutyl alcohol (d) tert-Butyl alcohol

Description : Hydroboration-oxidation of propene gives : (a) Isopropyl alcohol (b) n-Propyl alcohol (c) Isobutyl alcohol (d) tert-Butyl alcohol

Last Answer : n-Propyl alcohol

Which of the following has the highest boiling point? (a) diethyl ether (b) n-Butyraldehyde (c) n-propyl chloride (d) n-Butyl alcohol

Description : Which of the following has the highest boiling point? (a) diethyl ether (b) n-Butyraldehyde (c) n-propyl chloride (d) n-Butyl alcohol

Last Answer : n-Butyl alcohol

Which of the following compounds will react with methylmagnesium bromide to give tert-butyl alcohol? (a) Acetyl chloride (b) Acetone (c) Isopropyl alcohol (d) Acetaldehyde

Description : Which of the following compounds will react with methylmagnesium bromide to give tert-butyl alcohol? (a) Acetyl chloride (b) Acetone (c) Isopropyl alcohol (d) Acetaldehyde

Last Answer : Acetone

Which compound reacts most rapidly by an SN1 mechanism? (a) Methyl chloride(b) Isopropyl chloride(c) Ethyl chloride(d) tert-Butyl chloride

Description : Which compound reacts most rapidly by an SN1 mechanism? (a) Methyl chloride (b) Isopropyl chloride (c) Ethyl chloride (d) tert-Butyl chloride

Last Answer : tert-Butyl chloride

. In industrial nomenclature, alcohol means (A) Butyl alcohol (B) Propyl alcoho(C) Ethanol(D) Methyl alcohol

Description : . In industrial nomenclature, alcohol means (A) Butyl alcohol (B) Propyl alcoho (C) Ethanol (D) Methyl alcohol

Last Answer : (C) Ethanol

2-Methylpropene reacts with HBr to give (a) tert-Butyl bromide (b) Isobutane (c) n-Butyl bromide (d) None of these

Description : 2-Methylpropene reacts with HBr to give (a) tert-Butyl bromide (b) Isobutane (c) n-Butyl bromide (d) None of these

Last Answer : tert-Butyl bromide

Optical isomerism is shown by (a) n-Butyl chloride (b) sec-Butyl chloride (c) tert-Butyl chloride(d) Isobutyl chloride

Description : Optical isomerism is shown by (a) n-Butyl chloride (b) sec-Butyl chloride (c) tert-Butyl chloride (d) Isobutyl chloride

Last Answer : sec-Butyl chloride

Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Description : Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Last Answer : (A) Extraction with amyl or butyl acetate

The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Description : The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Last Answer : Answer: Option C

From site of uptake to site of action, fluazi fop-butyl move in a). water conducting stream b). sap conducting stream c). Both d). None

Description : From site of uptake to site of action, fluazi fop-butyl move in a). water conducting stream b). sap conducting stream c). Both d). None

Last Answer : c). Both

Which of the herbicide (ai) requiring higher amount for a unit area to be sprayed a). Bispyribac-sodium b). Butachlor c). Cyhalofop-butyl d). Pyrazosulfuron-ethyl

Description : Which of the herbicide (ai) requiring higher amount for a unit area to be sprayed a). Bispyribac-sodium b). Butachlor c). Cyhalofop-butyl d). Pyrazosulfuron-ethyl

Last Answer : b). Butachlor

Symptoms where shoots/leaves are bleached white are caused due to a). Atrazine b). Glufosinate c). Tembotrione d). Fluazifop-p-butyl

Description : Symptoms where shoots/leaves are bleached white are caused due to a). Atrazine b). Glufosinate c). Tembotrione d). Fluazifop-p-butyl

Last Answer : c). Tembotrione

Iodex, a pain relief balm, has the smell of __________ . (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Description : Iodex, a pain relief balm, has the smell of __________ . (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Last Answer : Methyl salicylate

Wood spirit is (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Description : Wood spirit is (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Last Answer : Methyl alcohol

What is carbil amine reaction ?

Description : What is carbil amine reaction ?

Last Answer : The primary or 1 degree amine ( CH3-NH2 and aniline) reacts with chloroform and alcoholic caustic potash ( KOH) to produce methyl carbil amine ( CH3-NC) . This reaction is called carbil amine reaction.