Discuss the factors affecting selection of type of roadside trees.

1 Answer

Answer :

Factors affecting selection of type of roadside trees are:

i) Trees selected should be such that it provides a large and dense crown with beautiful and uniform shape.

ii) Trees must be able to resist heavy wind blows and heavy storms.

iii) They must suit the soil and climatic conditions of the site.

iv) The trees which demand less amount of water should be preferred to those which require frequent irrigation.

v) They should be able to produce valuable small fruits, timber and other useful products.

vi) Trees should be able to withstand lopping and pruning.

vii) They are chosen on the basis of physical growth, shape and size, growth rate, branching pattern etc.

viii) Trees like Gulmohar, Ashoka can be planted for landscaping on highways.


Related questions

Description : Describe the factors affecting visibility of road at night time.

Last Answer : Factors affecting visibility of road at night time are: i)Amount and distribution of light: The distribution should be downwards so that high percentage of light is utilized for illuminating the pavement ... : To perceive an object, the physical and mental condition of driver plays a vital role.

Description : List out the factors affecting reaction time of driver. 

Last Answer : The factors affecting reaction time of driver are: a) Physical and Psychological characteristics of driver b) Type of the problem involved c) Environmental condition d) Temporary factors ( Eg: Motive of trip, Travel speed, Fatigue)

Description : Discuss the legislation and law enforcement education in road accident studies.

Last Answer : Various Legislative Measures have been adopted like 1. Age limit of drivers 2. Penalties of fine on License for careless driving. 3. Enable Police to check the drivers for the drunkenness. ... for children. 4. Posters exhibiting serious results due to carelessness of road users can be useful.

Description : Discuss the method of spot speed studies on a road section

Last Answer : i) The simplest method of finding spot speed is by using endoscope. ii) The observer is stationed on one side of the road and starts a stopwatch when a vehicle crosses that section iii) An endoscope is ... of vehicles in that group on Y axis. This graph is called Speed distribution curve.

Description : Explain with sketch: i) Rotary island ii) Channelizing island

Last Answer : a) Rotary Island: A traffic island constructed in the center of an intersection to force the movement of traffic in the clockwise direction is called Rotary Island. They are constructed ... shape of channelizing island will very much depend upon the layout and dimensions of the intersection.

Description : Describe the procedure of traffic volume count on any road intersection. Also write the method of representation of traffic volume count data.

Last Answer : The procedure of traffic volume count can be done by any of the methods below: a) Manual counting b) Automatic recorders c) Moving car method a) Manual counting: In this method, the ... Volume flow diagrams at intersection iii) Variation charts iv) Traffic flow map v) Traffic trend charts

Description : Explain the method of recording and reporting of an accident.

Last Answer : There are three steps involved: I) Collection of Accident data II) Accident Report III) Accident Records I) Collection of Accident data: a) General: Date, Time, Persons involved in ... are most useful to compare the Accident pattern before & after the Remedial Measures have been taken.

Description : Describe the points to be considered for road safety.

Last Answer : Points to be considered for road safety are: 1) The road should be designed to proper standards, built to the correct specifications & maintained adequately. 2) The safe speed at which the ... to about 30%. 8) Channelization Islands Reduces the number of Collision points & hence promotes safety.

Description : Suggest the preventive measures to prevent road accidents.

Last Answer : Following measure/remedies are suggested to prevent road accidents: - Engineering Aids/Measures 1. By checking and Redesigning the Road geometrics, if necessary (sight distance, width of ... safety should be displayed - This knowledge should also be given to children, schools, parents

Description : Write the objectives of road arboriculture.

Last Answer : The objectives of road arboriculture are: i) To provide attractive landscape on the roadside. ii) To provide shades to the road user. iii) To interrupt the annoying sound waves and fumes from road ... We get fruit bearing trees and timber. viii) To decrease the impact of air pollution and dust.

Description : Enumerate the advantages and disadvantages of grade separated intersections

Last Answer : Advantages: i) Grade separated intersections provide maximum facility to the crossing traffic and avoid accident while crossing. ii) They provide increased safety for turning traffic. By introducing ... They may cause undesirable crests and sags in vertical alignment in flat or plain areas. 

Description : Compare the fixed time signals with manually operated signals.

Last Answer : Fixed time signals Manually operated signals 1. These are pre-time signals which are set to repeat regularly a cycle of red, yellow and green lights. 1. These signals are those in which timings ... routes changes during the day.  4. Initial cost is high.  4. Less expensive.

Description : Write the points to be considered while erecting road signs.

Last Answer : The points to be considered while erecting road signs are: i) The signs should be placed on the left hand side of the road. ii) Road sign should normally be placed at right angles to the pavement and ... of the sign adjacent to highway, should not be less than 60cm away from the edge of the kerb. 

Description : Explain the uses of various carriage way markings.

Last Answer : The uses of various carriage way markings are: i) Center line marking: They are provided on two way roads to separate the streams of traffic moving in opposite direction. ii) Traffic ... the form of monument within the carriageway so as to prevent vehicles from colliding with the obstruction.

Description : Describe the necessity of origin and destination study.

Last Answer : Necessities of origin and destination study are: i) To judge the adequacy of existing routes and to use in planning new network of roads. ii) To plan transportation system and mass transit ... transport. viii) To establish design standards for the roads, bridges and culverts along the route.

Description : Classify the traffic markings.

Last Answer : Traffic markings are follows: 1. Carriageway marking or pavement marking 2. Kerb marking 3. Object marking 4. Reflector marking or unit marking

Description : Write the types of signals to be provided on road.

Last Answer : The types of traffic signals to be provided are: i) Traffic Control Signals: a) Fixed time signal b) Manually operated signal c) Traffic actuated signal ii) Pedestrian signal iii) Special traffic signal

Description : List out the traffic controlling devices.

Last Answer : The types of traffic controlling devices are as follows: i) Traffic signs or Road signs ii) Traffic markings or Road markings iii) Traffic signals iv) Traffic Islands

Description : Give the purposes of traffic studies.

Last Answer : i) To collect the data about type and volume of traffic at present and to estimate the same that the road is expected to carry in near future. ii) To determine the existing facilities such as ... traffic survey relating to accidents. vii) To estimate the amount of road taxes that can be levied.

Description : Write the essential road characteristics to be considered in traffic engineering.

Last Answer : The essential road characteristics to be considered in traffic engineering are as follows: i) Gradient ii) Curve of road iii) Design speed iv) Friction between road and tyre surface

Description : Define Traffic engineering

Last Answer : The phase of highway engineering which deals with planning and geometrical design of Roads, streets, adjoining lands with traffic operations for safe convenient and economic transportation of persons and goods is called as Traffic Engineering.

Description : What are the factors affecting the selection of Maximum flux density?

Last Answer : 1. Net core weight: Higher the flux density lesser net weight of core. 2.Saving in copper:Higher the flux density lesser mean turn of windings. 3.Overall economy: Higher the flux ... High Flux density results in high losses and hence efficiency decreases 8.Hence high temperature rise and noise

Description : State the factors affecting selection of construction materials.

Last Answer : Following are the various factors being considered for selection of construction material. 1) Prescribed load: It is a design load which can be taken by the construction material. The ... the eco-system of environment and the required material should be eco-friendly or environmentally friendly.

Description : Enlist four factors affecting selection of cleaning process.

Last Answer : 1. Type of Contaminants 2. Composition of metal 3. Thickness of rust and scale 4. Degree of cleanliness required 5. Condition of metal 6. Surface finish tolerances 7. Allowable metal loss.

Description : Enlist the factors affecting on selection of survey station or survey line in chain survey.

Last Answer : Following are the factors affecting on selection of survey station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole ... level ground. 9) The survey lines should run as far as possible nearer to object.

Description : What are the important factors affecting selection of site for a new plant

Last Answer : Factors affecting selection of site for new industry/plant: 1. Availability of raw material: As far as possible the site selected should be near the source of raw materials so that cost of ... in such a way that a plenty of land other facilities must be available for future expansion.

Description : List any four factors affecting selection of surface finishing processes.

Last Answer : Following factors will affect the selection of surface finishing processes: 1. Material of component 2. Basic machining operation carried out on component 3. Dimensions of component 4. Final value (in µm) of machined surfaces 5. Application of machined surfaces 

Description : Discuss factors affecting evaporation.

Last Answer : Factors affecting evaporation: 1) Temperature: The rate of evaporation is directly proportional to temp of liquid. 2) Temperature and time of evaporation: It has been observed that exposure ... : The rate of evaporation is directly proportional to the vapour pressure of the evaporating liquid.

Description : Discuss the factors considered for selection of pump

Last Answer : 1) Pressure: Pump is ued to pressurize the fluid in system according to need of pressure we can select pump as below 2) Speed of pump: if the speed of pump is increased beyond its ... according to application we can choose it by economical aspect cost of pump & its spares should be less.

Description : Commuters: Do you feel that road work and roadside tree trimming should be done after 10:00 a.m., when possible, in order to help reduce traffic jams?

Last Answer : Not necessarily. I think that commuting should be done at other hours than it is.

Description : Do you have a memorable roadside attraction story to share?

Last Answer : answer:I went to the home of the jackalopes. Also, the Sinclair dinosaur.

Description : Does anyone remember the name of that roadside restaurant they had in the 60's and 70's that sold the most amazing chocolate sundaes?

Last Answer : Sounds like Howard Johnson’s. Does this ring a bell?

Description : What is your opinion on roadside memorials ?

Last Answer : This is new to me, there really is no reason to get upset at this. Maybe they are really huge environmentalists lol….?

Description : What uniquely odd roadside attraction would you recommend visiting?

Last Answer : The Grandfather Tree in Humboldt County, California is pretty cool. It really is quite large. I know I've visited that on road trips before. Also, the Trees of Mystery in Del Norte County ... and signs and that we've stopped before. Most of those types of things are usually pretty good.

Description : If you could create some roadside attraction (like the worlds largest ball of yarn) what would it be?

Last Answer : I would want something like in the very beginning of House of 1000 Corpses. I think it’d be cool to have one of those creepy attractions that attracts the geeks and lovers of the occult in throngs. Especially at Halloween!

Description : looking to identify tall purple weed along roadside

Last Answer : Need Answer

Description : What serves as the most effective roadside IED observation point?

Last Answer : High rise building

Description : What serves as the most effective roadside IED observation point?

Last Answer : High rise building

Description : What are some driver membership plans that offer roadside assistance?

Last Answer : I use This one MCA motor clubofamerica.co m/mrchim75

Description : Surviving Road Trip Breakdowns With Roadside Assistance?

Last Answer : Experiencing a road trip breakdown can be stressful, overwhelming, and discouraging on one's vacation or business trip. To avoid allowing a road trip breakdown to ruin one's trip, there are some preventative ... arrive to your vehicle. You can always take a cab back to the scene of the accident.

Description : Sunita a village woman sells mud pots on the roadside. So Sunita is a …………………….. a. Hawker b. Peddler c. Cheap Jack d. Pavement Traders

Last Answer : d. Pavement Traders

Description : Crop factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder types c) Cylinder speed, feed rate d) Cylinder type, feed rate

Last Answer : Variety of crop, Moisture in crop material

Description : Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Cylinder speed, feed rate

Description : Machine factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Feeding chute angle, cylinder type

Description : State the purpose of providing tunnel lining and state the factors affecting type of lining.

Last Answer : Purpose of tunnel lining: 1. To provide the correct desired shape to the tunnel. 2. To support the loosened rock pieces during blasting. 3. To increase the structural strength of soft places ... 2. Purpose for which the tunnel is constructed 3. Funds available 4. Aesthetic consideration. 

Description : ................ is used in game trees to reduce the number of branches of the search tree to be traversed without affecting the solution. (A) Best first search (B) Goal stack planning (C) Alpha-beta pruning procedure (D) Min-max search

Last Answer : (C) Alpha-beta pruning procedure

Description : Explain two factors affecting the development of the cotton textile in India. -Geography

Last Answer : Two factors affecting the development of the cotton textile in India are : 1. Competition with synthetic textile. 2. Obsolete Machinery.

Description : Explain any five factors affecting the location of an industry. -SST 10th

Last Answer : Five factors that affect the location of an industry: 1. Raw material: Availability of raw material is very important for the location as it is one of the basic inputs required. 2. ... Market: A nearby market place makes it much easier to sell goods produced and reduces transportation cost.

Description : State any two factors affecting the economic viability of mineral reserves. -SST 10th

Last Answer : (i) The mineral content of the ore must be in sufficient concentration to make its extraction commercially viable. (ii) The type of formation or structure in which minerals are found determines the relative ease with which mineral ores may be mined. This also determines the cost of extraction.