Define (i) Permeability (ii) Reluctance.

Define (i) Permeability (ii) Reluctance.
by

1 Answer

Answer :

Permeability: The capability of the magnetic material to conduct the magnetic flux is known as permeability (OR) It is defined as ratio of magnetic flux density B in a medium to the magnetic flux intensity H at the same location in the medium. 

Reluctance: It is defined as the property of a material due to which it opposes the creation of magnetic flux in it.
by

Related questions

Define: (i) Efficiency (ii) Voltage regulation of transformer.

Description : Define: (i) Efficiency (ii) Voltage regulation of transformer.

Last Answer : i) Efficiency : It is the ratio of output power to the input power of the transformer.It is denoted by η. ii) Voltage Regulation of transformer: The ratio of the change in Secondary Terminal ... So where, VNL = No Load Secondary voltage VFL = Full load secondary voltage

Define: (i) Inductive reactance (ii) Impedance.

Description : Define: (i) Inductive reactance (ii) Impedance.

Last Answer : i) Inductive reactance: Inductive reactance is the opposition offered by an inductor to alternating current . It is denoted by XL and given by XL = 2πf LΩ = ωL Ω ii)Impedance: It is the total opposition offered to flow of AC current in an AC circuit. It is denoted by Z and the unit is ohm. 

Define: (i) Electromagnetism (ii) Magnetic flux.

Description : Define: (i) Electromagnetism (ii) Magnetic flux.

Last Answer : i)Electromagnetism : It is the magnetism generated by electricity. OR  It is defined as the phenomenon associated with electric and magnetic fields and their interactions with each other. ii) Magnetic flux : The total number of magnetic lines of force in a magnetic field is called magnetic flux.

Define filter and state it’s types.

Description : Define filter and state it’s types.

Last Answer : A filter circuit may be defined as a circuit, which removes (or minimizes)the unwanted a.c. component of the rectifier output and allows only the d.c. component to reach the load. Types of filters 1) ... 2) Choke input filter(series inductor filter) 3) LC filter 4) π Filter 5) RC filter

Define transformation ratio of a transformer.

Description : Define transformation ratio of a transformer.

Last Answer : Transformation Ratio (K) of a transformer: It is the ratio of secondary number of turns to primary number of turns. (OR) It is the ratio of secondary voltage to primary voltage. (OR ) It is the ratio of primary current to secondary current. OR

Define FHP motor and list various types.

Description : Define FHP motor and list various types.

Last Answer : Any motor rated less than one horse power may be called as fractional horse power motors(FHP) various types of FHP motors are: 1.Split phase induction motor 2. Capacitor start induction motor 3. Capacitor start capacitor run induction motor 4. Shaded pole induction motor. 

Define EMF and state its unit.

Description : Define EMF and state its unit.

Last Answer : Electromotive force(EMF): A potential difference generated by a source of electrical energy across its terminals which tends to produce an electric current in a circuit is called electromotive force. Unit of EMF is Volt

Define passive components and classify them.

Description : Define passive components and classify them.

Last Answer : Passive components: The components which by themselves are not capable of amplifying (or processing) electrical signals are known as passive components. They require external energy source for their functioning. These are bidirectional devices.  Classification: Resistors, Capacitors, Inductors etc.

Draw: (i) Input characteristics of transistor in CE mode. (ii) Output characteristics of transistor in CE mode and show different regions on it.

Description : Draw: (i) Input characteristics of transistor in CE mode. (ii) Output characteristics of transistor in CE mode and show different regions on it.

Last Answer : (i) Input characteristics of transistor in CE mode.   (ii) Output characteristics of transistor in CE mode and show different regions on it.  

Explain the operation of transistor as a switch and as an amplifier, with neat circuit diagrams.

Description : Explain the operation of transistor as a switch and as an amplifier, with neat circuit diagrams. 

Last Answer : Explanation of transistor as a switch: The transistor can be used for two types of application viz. amplification and switching. For the amplification, transistor is biased in its active region. ... results in a large output voltage, which shows that the transistor works as an amplifier.

Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Description : Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Last Answer : During positive half-cycle of input, the secondary voltage VAB is positive, so diodes D1 and D2 forward biased and D3 and D4 reverse biased. The load current flows from terminal A ... smooth DC voltage appears across the load. The input and output waveforms are shown in the figure.

List any 4 advantages and any 4 disadvantages of Integrated circuits.

Description : List any 4 advantages and any 4 disadvantages of Integrated circuits.

Last Answer : Advantages of Integrated circuits:- 1. Extremely small size. 2. Very small weight . 3. Very low cost . 4. More reliable . 5. Lower power consumption . 6. Easy replacement ... achieved.  9.Large value of saturation resistance of transistors. 10.Voltage dependence of resistor and capacitors.

Draw the output characteristics of BJT in CE configuration and label various regions on it.

Description : Draw the output characteristics of BJT in CE configuration and label various regions on it.

Last Answer :  output characteristics of BJT in CE configuration 

State the applications of BJT.

Description : State the applications of BJT.

Last Answer : Applications of BJT: 1. As a switch 2. As an amplifier 3. As a multivibrator 4. As a oscillator 5. As a timer circuit 6. As a Logic circuits 7. Delay circuits

Draw the block diagram of regulated power supply.

Description : Draw the block diagram of regulated power supply.

Last Answer : Block diagram of regulated power supply:

List different types of resistors and capacitors.

Description : List different types of resistors and capacitors.

Last Answer : Types of Resistors: 1. Carbon Composition resistor 2. Thin film resistor 3. Thick film resistor 4. Wire wound resistor 5. Thermistor 6. LDR 7. Photo resistor Types of capacitors: 1 ... capacitor 2. Variable capacitor 3. Air ganged capacitor 4. PVC ganged capacitor 5. Trimmer capacitor

Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Description : Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Last Answer : Statically Induced EMF:- When changing magnetic field links with a stationary coil an emf is induced. This emf is called statically induced emf. Statically induced EMF is of two types: Self-induced ... cuts the field and an emf is induced. This emf is called dynamically induced emf.    

Explain the working of auto-transformer and state any two advantages of it.

Description : Explain the working of auto-transformer and state any two advantages of it. 

Last Answer : Working of auto transformer :-It is a transformer with one winding only, part of this being common to both primary and secondary. In this transformer the primary and secondary are not electrically ... are less, so the efficiency of auto transformer is higher than that of two winding transformer.

Write the relation between RMS value and Average value.

Description : Write the relation between RMS value and Average value.

Last Answer : The ratio of RMS value to average value is called the form factor of an alternating quantity.

Draw and explain: bridge rectifier with shunt capacitor filter.

Description : Draw and explain: bridge rectifier with shunt capacitor filter.

Last Answer : Operation of bridge rectifier with capacitor filter is explained in different intervals with the help of the following wave form. Operation in interval at 0 to A: ... filter is very close to theideal dc voltage waveform as most of the ripple is removed from rectified output.

Explain ideal voltage source with suitable diagram.

Description : Explain ideal voltage source with suitable diagram.

Last Answer : A voltage source is a two terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. ... the terminal voltage remains constant equal to V volts without load (RL = ∞) or with load

State the need for filters and list the different types of filters.

Description : State the need for filters and list the different types of filters.

Last Answer : Need for filters 1) Output of all rectifiers is pulsating dc voltage and most of citcuits which work on dc requires pure dc voltage. 2) So in order to get pure dc waveform, filters are connected at the ... 2) Choke input filter(series inductor filter) 3) LC filter 4) π Filter 5) RC filter

List the different transistor configurations.

Description : List the different transistor configurations.

Last Answer : The three different transistor configurations are, 1. Common emitter configuration(CE) 2. Common base configuration(CB) 3. Common collector configuration(CC)

State why transistor is called as a bipolar device.

Description : State why transistor is called as a bipolar device.

Last Answer : In case of transistor (BJT), the current conduction takes place due to both electrons and holes, ie, due to both positive as well as negative polarity charge carriers. Therefore transistor is called a bipolar device. 

List any two applications of LED.

Description : List any two applications of LED.

Last Answer : 1) LEDs are used in 7 segment display and dot matrix display. 2) They are used in opto couplers. 3) They are used for indicating power ON/OFF conditions. 4) They are used in infrared remote controls. 5) They are used as indicators in various electronic circuits.

Compare analog and digital ICs.

Description : Compare analog and digital ICs.

Last Answer : Sr. No. Analog ICs Digital ICs  1 Analog ICs accept and output analog data through its pins. Digital ICs deal with only logic data inputs and outputs.  2 Almost every ... IC for dedicated application. Works with TTL logic level and works in voltage range of 0-5V only.

Compare autotransformer with two winding transformer.

Description : Compare autotransformer with two winding transformer.

Last Answer : Two winding transformer Auto transformer 1.It has two separate windings : a) primary, b)secondary.  1. An auto transformer has single winding which acts both as primary and secondary ... varied. 3. They find application as boosters in AC feeders to increase the voltage levels.

State Faraday's first and second law of electromagnetic induction.

Description : State Faraday's first and second law of electromagnetic induction.

Last Answer : i)Faraday's First Law: Whenever a conductor cuts the magnetic lines of force or is cut by the magnetic lines of force or flux linking with conductor changes, an emf is induced in the conductor.  ... Law: The magnitude of induced emf is directly proportional to the rate of change of flux.

Write emf equation of a transformer.

Description : Write emf equation of a transformer.

Last Answer : E.M.F equation of transformer is given by where Фm= Maximum value of ac flux linking with primary and secondary winding. f = frequency of applied ac signal N= number of turns on primary or ... in primary = E1=4.44 Фm f N1volts  Voltage induced in primary = E2=4.44 Фm f N2volts

State the types of single phase induction motors.

Description : State the types of single phase induction motors.

Last Answer : The types of single phase induction motors are: i) Resistance split phase induction motor. ii) Capacitor split phase inductor motor. a. Capacitor start induction run motor b. permanent capacitor motor c. capacitor start capacitor run induction motor iii) Shaded pole induction motor.

State the working principle of I ø transformer.

Description : State the working principle of I ø transformer.

Last Answer : Working principle of transformer : Transformer works on the principle of mutual electromagnetic induction. When AC voltage is applied to the primary winding of a transformer it causes ac current to flow ... in the secondary winding. The current flows in the secondary circuit if load is connected.

With the help of waveforms and phasor diagrams, show the phase relationship between voltage and current in pure inductive circuit.

Description : With the help of waveforms and phasor diagrams, show the phase relationship between voltage and current in pure inductive circuit.

Last Answer : Phasor Diagram:  

List the types of induced emf.

Description : List the types of induced emf.

Last Answer : The types of induced emf are : i) Statically induced emf , ii) Dynamically induced emf

Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Description : Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Last Answer : (i) Magnetic flux density (B): It is the magnetic flux per unit area measured at right angles to the flux path. (Its unit is weber/m2 or tesla).  (ii) Reluctance: It is the ... flux to set up through it and it is reciprocal of reluctance. Permeance = 1/ Reluctance. Unit: weber/ampere.

Define : i) MMF ii) Reluctance iii) Fringing iv) Leakage flux

Description : Define : i) MMF ii) Reluctance iii) Fringing iv) Leakage flux

Last Answer : i) MMF:  It is the force that drives magnetic flux through magnetic circuit. It is measured in amp-turns.  ii) Reluctance (s) :-  Reluctance is the property of the substance ... through the magnetic circuit, leaks through the air surrounding the core. This flux is called as leakage flux.

Define reluctance and permeance with respect to magnetic circuit.

Description : Define reluctance and permeance with respect to magnetic circuit.

Last Answer : Reluctance: The opposition offered by magnetic circuit to establish magnetic flux in it, is called as “Reluctance”.  Permeance: It is the reciprocal of reluctance and implies the magnetic core’s readiness with which magnetic flux is developed. 

Define reluctance and give its unit.

Description : Define reluctance and give its unit.

Last Answer : Reluctance is the resistance offered the material to the passage of magnetic flux through it and corresponds to resistance in the electric circuit it is denoted by (s) And it's unit is amper per weber (A/Wb)

What is reluctance in electronics?

Description : What is reluctance in electronics?

Last Answer : Need answer

What is the verb of reluctance?

Description : What is the verb of reluctance?

Last Answer : reluctant

The voltage output of an AC generator is accurately controlled by _____________. A. changing the sensitivity of the prime mover to large changes in voltage B. varying the reluctance of the air gap C. varying the DC exciter voltage D. shorting out part of the armature windings

Description : The voltage output of an AC generator is accurately controlled by _____________. A. changing the sensitivity of the prime mover to large changes in voltage B. varying the reluctance of the air gap C. varying the DC exciter voltage D. shorting out part of the armature windings

Last Answer : Answer: C

The function of the commutator in a DC motor is to ________. A. reverse the flow of current through the armature B. reverse the flow of current in the field poles C. reduce the reluctance of the magnetic path through the motor D. shift the neutral running plane of the brushes to prevent sparking

Description : The function of the commutator in a DC motor is to ________. A. reverse the flow of current through the armature B. reverse the flow of current in the field poles C. reduce the reluctance of the magnetic path through the motor D. shift the neutral running plane of the brushes to prevent sparking

Last Answer : Answer: A

The opposition to the establishment of magnetic lines of force in a magnetic circuit is called the circuit's _______. A. resistance B. reluctance C. impedance D. inductance

Description : The opposition to the establishment of magnetic lines of force in a magnetic circuit is called the circuit's _______. A. resistance B. reluctance C. impedance D. inductance

Last Answer : Answer: B

What is reluctance?

Description : What is reluctance? 

Last Answer : It is the property of a magnetic material, which opposes the establishment of magnetic flux in it, as in the case resistance in an electric circuit. 

Calculate the reluctance of a material with length 2π x 10 -4 in air with area 0.5. a) 1 b) 10 c) 100 d) 1000

Description : Calculate the reluctance of a material with length 2π x 10 -4 in air with area 0.5. a) 1 b) 10 c) 100 d) 1000

Last Answer : d) 1000

Calculate the reluctance of the material with a mmf of 3.5 units and flux of 7units. a) 32.5 b) 10.5 c) 0.5 d) 2

Description : Calculate the reluctance of the material with a mmf of 3.5 units and flux of 7units. a) 32.5 b) 10.5 c) 0.5 d) 2

Last Answer : b) 10.5

The resistance in a magnetic material is called as a) Capacitance b) Inductance c) Reluctance d) Magnetic resistance

Description : The resistance in a magnetic material is called as a) Capacitance b) Inductance c) Reluctance d) Magnetic resistance

Last Answer : c) Reluctance

The magnetism left in the iron after exciting field has been removed is known as (a) permeance (b) residual magnetism (c) susceptance (d) reluctance

Description : The magnetism left in the iron after exciting field has been removed is known as (a) permeance (b) residual magnetism (c) susceptance (d) reluctance

Last Answer : (b) residual magnetism

The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance

Description : The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance

Last Answer : A. spectral response

68 The path of a magnetic flux in a transformer should have A. High resistance B. High reluctance C. Low resistance D. Low reluctance

Description : 68 The path of a magnetic flux in a transformer should have A. High resistance B. High reluctance C. Low resistance D. Low reluctance

Last Answer : D. Low reluctance

43 The purpose of providing an iron core in a transformer is to A.Provide support to windings B. Reduce hysteresis loss C. decrease the reluctance of the magnetic path D. reduce eddy current losses

Description : 43 The purpose of providing an iron core in a transformer is to A.Provide support to windings B. Reduce hysteresis loss C. decrease the reluctance of the magnetic path D. reduce eddy current losses

Last Answer : C. Decrease the reluctance of the magnetic path