In which part of the scale does the pointer indicate more accurately

by

1 Answer

Answer :

 In about middle of the scale

by

Related questions

A good choice of shunt resistance will place the indicating pointer near what part of the meter scale with a normal load?

Description : A good choice of shunt resistance will place the indicating pointer near what part of the meter scale with a normal load?

Last Answer : Midscale.

A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.

Which metrics would accurately indicate the success of the latest Facebook post? A. Likes and click-through B. Impressions and click-through C. Reach and engagement D. Sessions and pageview

Description : Which metrics would accurately indicate the success of the latest Facebook post? A. Likes and click-through B. Impressions and click-through C. Reach and engagement D. Sessions and pageview

Last Answer : C. Reach and engagement

Let’s say that a test accurately indicates participants’ scores on a future criterion (e.g., the PSAT is used to indicate high-school GPA scores). This test would clearly have which of the following? a. Face validity b. Concurrent validity c. Predictive validity d. Content validity

Description : Let’s say that a test accurately indicates participants’ scores on a future criterion (e.g., the PSAT is used to indicate high-school GPA scores). This test would clearly have which of the following? a. Face validity b. Concurrent validity c. Predictive validity d. Content validity

Last Answer : c. Predictive validity

The force required to move the pointer in an indicating instruments is

Description : The force required to move the pointer in an indicating instruments is

Last Answer : The force required to move the pointer in an indicating instruments is deflecting force

When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially...

Description : When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is ?

Last Answer : When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is all right.

The pointer of an indicating instrument should be?

Last Answer : The pointer of an indicating instrument should be very light.

The resistance can be measured most accurately by

Last Answer : The resistance can be measured most accurately by bridge method.

E.m.f. of a Weston cell is accurately measured by?

Last Answer : E.m.f. of a Weston cell is accurately measured by electrostatic voltmeter.

You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should _____________. A. replace the batteries in the instrument B. measure resistance by dividing the voltmeter indication by the ammeter indication C. set the pointer using a bridge D. change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

A capacitor is to be tested with a megohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value B. deflect to zero and remain at that position C. swing to a high reading and gradually decrease D. swing to zero then gradually increase with slight pointer movements down scale

Description : A capacitor is to be tested with a megohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value ... and gradually decrease D. swing to zero then gradually increase with slight pointer movements down scale

Last Answer : Answer: B

Before measuring an unknown resistance with an ohmmeter, you should _____________. A. adjust the meter's pointers to mid-scale B. change the meter's batteries C. center the meter's pointer at infinity D. short the test leads and calibrate the meter

Description : Before measuring an unknown resistance with an ohmmeter, you should _____________. A. adjust the meter's pointers to mid-scale B. change the meter's batteries C. center the meter's pointer at infinity D. short the test leads and calibrate the meter

Last Answer : Answer: D

Before measuring an unknown resistance with an ohmmeter, you should _____________. A. adjust the meter's pointer to mid-scale B. short the test leads and calibrate the meter reading to 'zero' C. change the meter's batteries D. center the meter's pointer at infinity

Description : Before measuring an unknown resistance with an ohmmeter, you should _____________. A. adjust the meter's pointer to mid-scale B. short the test leads and calibrate the meter reading to 'zero' C. change the meter's batteries D. center the meter's pointer at infinity

Last Answer : Answer: B

Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less than normal. B. The reading is practically zero and remains there. C. The capacitor shows no charging action, but indicates a very high resistance. D. The pointer moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Description : Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less ... moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Last Answer : Answer: B

When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter's pointer _____________. A. dipping toward zero then raising slowly B. continually rising as test voltage is applied C. kicking slightly down scale as voltage is applied D. fluctuating around a constant resistance reading

Description : When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter's pointer _____________. A. dipping toward ... kicking slightly down scale as voltage is applied D. fluctuating around a constant resistance reading

Last Answer : Answer: C

A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value for the capacitor B. first swing quickly to 'zero', then gradually move up the scale as the capacitor charges C. immediately deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Description : A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance ... deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Last Answer : Answer: C

When using a megohmmeter to test insulation, good insulation will be indicated by _____________. A. slight kicks of the needle down scale B. a downward dip followed by a gradual climb to the true resistance value C. a gradual rise in the pointer reading at the outset D. the initial dip of the pointer

Description : When using a megohmmeter to test insulation, good insulation will be indicated by _____________. A. slight kicks of the needle down scale B. a downward dip followed by a gradual climb to the true resistance ... C. a gradual rise in the pointer reading at the outset D. the initial dip of the pointer

Last Answer : Answer: B

How much can be measured accurately using meter scale ?

Description : How much can be measured accurately using meter scale ?

Last Answer : Measurements up to millimeters can be accurately measured using the meter scale.

Why is it difficult to accurately show the size of the planets and the distances between them at the same scale on a model of the solar system?

Description : Why is it difficult to accurately show the size of the planets and the distances between them at the same scale on a model of the solar system?

Last Answer : Planets are so small compared to the distance between them that the scale is not workable 

A milliammeter, with a full scale deflection reading of 100 milliamps, is known to have an accuracy of + or - 2%. A meter reading of 10 milliamps would indicate a line current of between _____________. A. 9.8 and 10.0 milliamperes B. 9.8 and 10.2 milliamperes C. 8.0 and 12.0 milliamperes D. 8.0 and 10.0 milliamperes

Description : A milliammeter, with a full scale deflection reading of 100 milliamps, is known to have an accuracy of + or - 2%. A meter reading of 10 milliamps would indicate a line current of between _____________. A. 9.8 ... 9.8 and 10.2 milliamperes C. 8.0 and 12.0 milliamperes D. 8.0 and 10.0 milliamperes

Last Answer : Answer: B

A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading

Description : A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading 2.5 A will be (a) 1% (b) 2% (c) 4% (d) None of these 

Last Answer : A

A digital voltmeter has a read-out range from 0 to 9999 counts. When full scale reading is 9.999 V, the

Description : A digital voltmeter has a read-out range from 0 to 9999 counts. When full scale reading is 9.999 V, the resolution of the instrument will be (a) 100 mV (b) 99 mV (c) 9 mV (d) 1 mV 

Last Answer : d) 1mV 9.999v÷9999v

A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD)

Description : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

Last Answer : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is: 0.05mA

A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying

Description : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect • 10 W resistance in series • 10 W resistance in parallel • 10/1999 W resistance in series • 10/1999 W resistance in parallel

Last Answer : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect 10/1999 W resistance in parallel

The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. ...

Description : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. What is the value of series resistor to be used?

Last Answer : The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. This is to have full deflection when 100V is measured. 99.99 K ohms is the value of series resistor to be used.

The full-scale deflection current of an ammeter is 1 mA and its internal...

Description :  The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used?

Last Answer :  The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100Ohm. If this meter is to have full deflection at 5A, 1/49.99 ohms is the value of the shunt resistance to be used.

A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be

Last Answer : A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be Hyperbolic.

A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is

Last Answer : A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is 2.44mV.

A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale...

Description : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is

Last Answer : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is 4.85%.

PMMC instrument gives uniform scale because:

Description : PMMC instrument gives uniform scale because:

Last Answer : PMMC instrument gives uniform scale because: It uses spring control and The deflection torque is proportional to the instrument current.

If two meters X and Y requires 40mA and 50mA respectively, to give full scale deflection, then:

Last Answer : If two meters X and Y requires 40mA and 50mA respectively, to give full scale deflection, then: X is more sensitive

The gravity controlled instrument has crowded scale because current is proportional to?

Last Answer : The gravity controlled instrument has crowded scale because current is proportional to sine of deflection angle.

If an instrument has cramped scale for larger values, then it follows?

Last Answer : If an instrument has cramped scale for larger values, then it follows logarithmic law.

The ratio of maximum displacement deviation to full scale deviation of the instrument is called?

Description : The ratio of maximum displacement deviation to full scale deviation of the instrument is called?

Last Answer : The ratio of maximum displacement deviation to full scale deviation of the instrument is called linearity.

The scale of a rectifier instrument is?

Last Answer : The scale of a rectifier instrument is linear.

The voltage output of an AC generator is accurately controlled by _____________. A. changing the sensitivity of the prime mover to large changes in voltage B. varying the reluctance of the air gap C. varying the DC exciter voltage D. shorting out part of the armature windings

Description : The voltage output of an AC generator is accurately controlled by _____________. A. changing the sensitivity of the prime mover to large changes in voltage B. varying the reluctance of the air gap C. varying the DC exciter voltage D. shorting out part of the armature windings

Last Answer : Answer: C

What part of the female reproductive system does the arrow indicate?

Description : What part of the female reproductive system does the arrow indicate?

Last Answer : What is the answer ?

Which prefix indicate the smallest part of a unit?

Description : Which prefix indicate the smallest part of a unit?

Last Answer : kilo

A part of an mrna has the base sequence gca. which change to this sequence would indicate a missense mutation?

Description : A part of an mrna has the base sequence gca. which change to this sequence would indicate a missense mutation?

Last Answer : A missense mutation is the change in a single nucleotide that results in a different amino acid being coded for. GCA codes for the amino acid Alanine. Therefore any of the following changes would be missense ... acid GUA -> Valine GGA -> Glycine CCA -> Proline UCA -> Serine ACA -> Threonine

Can a DNA results from a saliva test be used to more accurately identify ancestry?

Description : Can a DNA results from a saliva test be used to more accurately identify ancestry?

Last Answer : answer:I've used 23andMe - well, more accurately, my brother has. I'm not really sure what you mean by narrow down ancestral origins . That 40% German/French thing is the narrowing down ... searched for other people with the T2a1a haplotype I've found everything from Ireland to Sweden to Poland.

If flyers are subjected to even more inconvenience as a direct result, can we accurately call the latest airline terror attack "failed"?

Description : If flyers are subjected to even more inconvenience as a direct result, can we accurately call the latest airline terror attack "failed"?

Last Answer : He wasn’t trying to “inconvenience” us. He was trying to blow us the F### up. So yeah, he failed.

Which inset map shows the size of Alaska more accurately?

Description : Which inset map shows the size of Alaska more accurately?

Last Answer : North America inset map

Potentiometer measures the potential difference more accurately than a voltmeter, because

Description : Potentiometer measures the potential difference more accurately than a voltmeter, because

Last Answer : Potentiometer measures the potential difference more accurately than a voltmeter, because A. it does not ... resistance D. it has a low resistance

What might be one reason scientist have been able to predict the weather more accurately as computers have grown more powerful?

Description : What might be one reason scientist have been able to predict the weather more accurately as computers have grown more powerful?

Last Answer : More Powerful computer are never wrong

Lipoprotiens may be identified more accurately by means of (A) Electrophoresis (B) Ultra centrifugation (C) Centrifugation (D) Immunoelectrophoresis

Description : Lipoprotiens may be identified more accurately by means of (A) Electrophoresis (B) Ultra centrifugation (C) Centrifugation (D) Immunoelectrophoresis

Last Answer : Answer : D

The age of a tree can be determined more or less accurately by - (1) counting the number of branches (2) measuring the height of the tree (3) measuring the diameter of the trunk (4) counting the number of rings in the trunk

Description : The age of a tree can be determined more or less accurately by - (1) counting the number of branches (2) measuring the height of the tree (3) measuring the diameter of the trunk (4) counting the number of rings in the trunk

Last Answer : (4) counting the number of rings in the trunk Explanation: When a tree has been cut down or felled, then it is relatively easy to work out its age by counting the growth or annual rings that can be ... a tree is a special tissue (called the cambium) which forms new cells so that the tree can grow.

Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a physical layer device, and a switch is a data link layer device. C. A hub causes larger collision domains. D. Hubs are more sophisticated versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Last Answer : b. A,B,C

Which of the following statements accurately describes cancer of the esophagus? a) Chronic irritation of the esophagus is a known risk factor. In the United States, cancer of the esophagus has been associated with the ingestion of alcohol and the use of tobacco. b) It is three times more common in women in the U.S. than men. In the United States, carcinoma of the esophagus occurs more than three times as often in men as in women. c) It is seen more frequently in Caucasians than in African Americans. It is seen more frequently in African Americans than in Caucasians. d) It usually occurs in the fourth decade of life. It usually occurs in the fifth decade of life.

Description : Which of the following statements accurately describes cancer of the esophagus? a) Chronic irritation of the esophagus is a known risk factor. In the United States, cancer of the esophagus has been associated ... occurs in the fourth decade of life. It usually occurs in the fifth decade of life.

Last Answer : a) Chronic irritation of the esophagus is a known risk factor. In the United States, cancer of the esophagus has been associated with the ingestion of alcohol and the use of tobacco.

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.