The resolution of a 12 bit D/A converter using a binary ladder is

by

1 Answer

Answer :

The resolution of a 12 bit D/A converter using a binary ladder is 0.02%.

by

Related questions

A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is

Last Answer : A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is 2.44mV.

The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is

Last Answer : The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is 12μs.

A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is

Last Answer : A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is 4096μs.

The percent resolution of an 8 -bit D/A converter is

Description : The percent resolution of an 8 -bit D/A converter is

Last Answer : The percent resolution of an 8 -bit D/A converter is 0.392

For a certain 4 bit successive approximation A/D converter, the maximum ...

Last Answer : For a certain 4 bit successive approximation A/D converter, the maximum ladder output is +8V. if a constant +6V is applied to the analog input the sequence of binary states for the SA register is 0110.

An 8 bit converter type A/D converter makes at least 8000conversions/sec. The clock frequency used is

Last Answer : An 8 bit converter type A/D converter makes at least 8000conversions/sec. The clock frequency used is 2MHz.

In an R-2R ladder D/A converter, the input resistance is

Description : In an R-2R ladder D/A converter, the input resistance is  1. Not same for all digital inputs 2. R for each input 3. 2R for each input 4. 3R for each input 

Last Answer : In an R-2R ladder D/A converter, the input resistance is 3R for each input 

What is the voltage resolution of an 8-stage ladder network?

Description : What is the voltage resolution of an 8-stage ladder network?  (1) Vref /128 (2) Vref /256 (3) Vref /512 (4) Vref /1024

Last Answer : Vref /256 is the voltage resolution of an 8-stage ladder network.

Define resolution of a data converter.

Description : Define resolution of a data converter.

Last Answer : The resolution of a converter is the smallest change in voltage which may be produced at the output or input of the converter. Resolution (in volts)= VFS/2n-1=1 LSB increment. The resolution of an ADC is defined as the smallest change in analog input for a one bit change at the output.

In D/A converter, the resolution required is 50mv and the total maximum input is 10v. The number of

Description : In D/A converter, the resolution required is 50mv and the total maximum input is 10v. The number of bits required is   (A) 7 (B) 8 (C) 9 (D) 200

Last Answer : In D/A converter, the resolution required is 50mv and the total maximum input is 10v. The number of  bits required is 8 

The number of comparators required in a 3-bit comparator type analog to digital converter is

Description : The number of comparators required in a 3-bit comparator type analog to digital converter is  A) 2 B) 3 C) 7 D) 8 

Last Answer : Number of comparators =2^n -1= 2^3 -1=7

In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB

Description : In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB?  (a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

Last Answer : In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB?  (a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the...

Description : A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the input code 1010:  (1) 0.3125 V (2) 3.125 V (3) 0.78125 V (4) –3.125 V

Last Answer : 3.125V

Not far off shore a ship stands with a rope ladder hanging over her side. The rope has 10 rungs. The distance between each rung is 12 inches. The lowest rung touches the water. The ocean is calm. Because of the incoming tide, the surface of the water rises 4 inches per hour. How soon will the water cover the third rung from the top rung of the rope ladder? -Riddles

Description : Not far off shore a ship stands with a rope ladder hanging over her side. The rope has 10 rungs. The distance between each rung is 12 inches. The lowest rung touches the water. The ocean is calm. ... hour. How soon will the water cover the third rung from the top rung of the rope ladder? -Riddles

Last Answer : When a problem deals with a physical phenonmenon, the phenonmenon should be considered as well as the numbers given. As the water rises, so does the rope ladder. The water will never cover the rung.

A boat has a ladder that has six rungs; each rung is one foot apart. The bottom rung is one foot from the water. The tide rises at 12 inches every 15 minutes. High tide peaks in one hour. When the tide is at its highest, how many rungs are under water?

Description : A boat has a ladder that has six rungs; each rung is one foot apart. The bottom rung is one foot from the water. The tide rises at 12 inches every 15 minutes. High tide peaks in one hour. When the tide is at its highest, how many rungs are under water?

Last Answer : None, the boat rises with the tide.

High-resolution, bit-mapped displays are useful for displaying _____________ a) clearer characters b) graphics c) more characters d) all of the mentioned

Description : High-resolution, bit-mapped displays are useful for displaying _____________ a) clearer characters b) graphics c) more characters d) all of the mentioned

Last Answer : c) more characters

A 10 bit resistive divider is constructed such that the current through...

Description : A 10 bit resistive divider is constructed such that the current through the LSB resistor is 100μA. The maximum current that will flow through the MSB resistor is 

Last Answer : A 10 bit resistive divider is constructed such that the current through the LSB resistor is 100μA. The maximum current that will flow through the MSB resistor is 51.2mA.

How should you access a roof using a articulated ladder?

Description : How should you access a roof using a articulated ladder?

Last Answer : rrr

How To Write The Program For Single Push Button By Using Ladder Diagram?

Description : How To Write The Program For Single Push Button By Using Ladder Diagram?

Last Answer : 1. Create a Push button 2. Connect a Counter series to PB 3. Create a compare button 4. Initialize 1 at one end 5. Counter output in another 6. Connect the Coil which has to be energized 7. Initialize 2 at one end 8. Counter output in another 9. Connect the Coil which has to be reenergized.

Which of the following is true? 1) Byte is a single digit in a binary number 2) Bit represents a grouping of digital numbers 3) Eight-digit binary number is called a byte 4) Eight-digit binary number is called a bit 5) None of these

Description : Which of the following is true? 1) Byte is a single digit in a binary number 2) Bit represents a grouping of digital numbers 3) Eight-digit binary number is called a byte 4) Eight-digit binary number is called a bit 5) None of these

Last Answer : Answer :3

The least significant bit of the binary number, which is equivalent to any odd decimal number, is: A) 0 B) 1 C) 1 or 0 D) 3

Description : The least significant bit of the binary number, which is equivalent to any odd decimal number, is: A) 0 B) 1 C) 1 or 0 D) 3

Last Answer : Answer : A

Which of the following is correct full form of BCD? A) Binary Coded Decimal B) Bit Coded Decimal C) Binary Coded Digit D) Bit Coded Digit

Description : Which of the following is correct full form of BCD? A) Binary Coded Decimal B) Bit Coded Decimal C) Binary Coded Digit D) Bit Coded Digit

Last Answer : Answer : A

Bit stands for A) Binary digits B) bit of system C) a part of byte D) All of above

Description : Bit stands for A) Binary digits B) bit of system C) a part of byte D) All of above

Last Answer : Answer : A

EBCDIC stands for A) Extended Binary Coded Decimal Interchange Code B) Extended Bit Code Decimal Interchange Code C) Extended Bit Case Decimal Interchange Code D) Extended Binary Case Decimal Interchange Code

Description : EBCDIC stands for A) Extended Binary Coded Decimal Interchange Code B) Extended Bit Code Decimal Interchange Code C) Extended Bit Case Decimal Interchange Code D) Extended Binary Case Decimal Interchange Code

Last Answer : Answer : A

Which number system is usually followed in a typical 32-bit computer? A) Binary B) Decimal C) Hexadecimal D) Octal

Description : Which number system is usually followed in a typical 32-bit computer? A) Binary B) Decimal C) Hexadecimal D) Octal

Last Answer : Answer : A

In a computer is capable to store single binary bit. A) Capacitor B) Flip flop C) Register D) Inductor

Description : In a computer is capable to store single binary bit. A) Capacitor B) Flip flop C) Register D) Inductor

Last Answer : Answer : B

BCD is A) Binary Coded Decimal B) Bit Coded Decimal C) Binary Coded Digit D) Bit Coded Digit

Description : BCD is A) Binary Coded Decimal B) Bit Coded Decimal C) Binary Coded Digit D) Bit Coded Digit

Last Answer : Answer : A

Instructions and memory address are represented by A) Character code B) Binary codes C) Binary word D) Parity bit

Description : Instructions and memory address are represented by A) Character code B) Binary codes C) Binary word D) Parity bit

Last Answer : Answer : B

ASCII and EBCDIC are the popular character coding systems. What does EBCDIC stand for? A) Extended Binary Coded Decimal Interchange Code B) Extended Bit Code Decimal Interchange Code C) Extended Bit Case Decimal Interchange Code D) Extended Binary Case Decimal Interchange Code

Description : ASCII and EBCDIC are the popular character coding systems. What does EBCDIC stand for? A) Extended Binary Coded Decimal Interchange Code B) Extended Bit Code Decimal Interchange Code C) Extended Bit Case Decimal Interchange Code D) Extended Binary Case Decimal Interchange Code

Last Answer : Answer : A

What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Description : What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Last Answer : B. Direct sequence

A coherent binary phase shift keyed BPSK transmitter operates at a bit rate of 20 Mbps with a carrier to noise ratio C/N of 8.8dB. Find Eb/No. A. 73 dB B. 62.4 dB C. 81.8 dB D. 8.8 dB

Description : A coherent binary phase shift keyed BPSK transmitter operates at a bit rate of 20 Mbps with a carrier to noise ratio C/N of 8.8dB. Find Eb/No. A. 73 dB B. 62.4 dB C. 81.8 dB D. 8.8 dB

Last Answer : D. 8.8 dB

: Each digit in a binary number is known as a A. bit B. byte C. number D. digit

Description : : Each digit in a binary number is known as a A. bit B. byte C. number D. digit

Last Answer : bit

3 bit binary numbers can be represented by a. Binary number b. Decimal number Cc. Hexadecimal number d. Octal number

Description : 3 bit binary numbers can be represented by a. Binary number b. Decimal number Cc. Hexadecimal number d. Octal number

Last Answer : d. Octal number

Which number is formed from a binary number by grouping bits in groups of 4-bit each starting at the binary point: a. Binary b. Octal c. Decimal d. Hexadecimal

Description : Which number is formed from a binary number by grouping bits in groups of 4-bit each starting at the binary point: a. Binary b. Octal c. Decimal d. Hexadecimal

Last Answer : d. Hexadecimal

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : Binary codes

BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit

Description : BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit

Last Answer : Binary Coded Decimal

EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code

Description : EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code

Last Answer : Extended Binary Coded Decimal Interchange Code

EBCDIC stands for a) Extended Binary Coded Decimal Interchange Code b) Extended Bit Code Decimal Interchange Code c) Extended Bit Case Decimal Interchange Code d) Extended Binary Case Decimal Interchange Code

Description : EBCDIC stands for a) Extended Binary Coded Decimal Interchange Code b) Extended Bit Code Decimal Interchange Code c) Extended Bit Case Decimal Interchange Code d) Extended Binary Case Decimal Interchange Code

Last Answer : a) Extended Binary Coded Decimal Interchange Code

In a Computer_________ is capable to store single binary bit. 1) Capacitor 2) Flip Flop 3) Register 4) Inductor

Description : In a Computer_________ is capable to store single binary bit. 1) Capacitor 2) Flip Flop 3) Register 4) Inductor

Last Answer : 2) Flip Flop

In a Computer_________ is capable to store single binary bit. 1 Capacitor 2 Flip Flop 3 Register 4 Inductor

Description : In a Computer_________ is capable to store single binary bit. 1 Capacitor 2 Flip Flop 3 Register 4 Inductor

Last Answer : 2 Flip Flop

In Manchester encoding, does a low-to-high light level transition occurring in the middle of the bit duration represent a binary 1 or a binary 0?

Description : In Manchester encoding, does a low-to-high light level transition occurring in the middle of the bit duration represent a binary 1 or a binary 0?

Last Answer : Binary 0.

In NRZ code, does the presence of a high-light level in the bit duration represent a binary 1 or a binary 0?

Description : In NRZ code, does the presence of a high-light level in the bit duration represent a binary 1 or a binary 0?

Last Answer : Binary 1.

Category of data transmission if the binary pulse is maintained for the entire bit time?

Description : Category of data transmission if the binary pulse is maintained for the entire bit time?

Last Answer : Return to zero

When configuring the subnet mask for an IP address, which formats can be used? * dotted-decimal. * Hexadecimal * Bit-count * Octal * Binary

Description : When configuring the subnet mask for an IP address, which formats can be used? * dotted-decimal. * Hexadecimal * Bit-count * Octal * Binary

Last Answer : Correct answer: A, B &C

The least significant bit of the binary number, which is equivalent to any odd decimal number, is: a. 0 b. 1 c. 1 or 0 d. 3

Description : The least significant bit of the binary number, which is equivalent to any odd decimal number, is: a. 0 b. 1 c. 1 or 0 d. 3

Last Answer : a. 0

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : b. Binary codes

BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit

Description : BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit

Last Answer : a. Binary Coded Decimal

EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code

Description : EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code

Last Answer : a. Extended Binary Coded Decimal Interchange Code

The least significant bit of the binary number, which is equivalent to any odd decimal number, is: a. 0 b. 1 c. 1 or 0 d. 3

Description : The least significant bit of the binary number, which is equivalent to any odd decimal number, is: a. 0 b. 1 c. 1 or 0 d. 3

Last Answer : a. 0

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : b. Binary codes