The advantage of serial transport compared with parallel transfer for data transmission is that

by

1 Answer

Answer :

The advantage of serial transport compared with parallel transfer for data transmission is that It needs only one wire

by

Related questions

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

Registers in which data is entered or taken out in serial form are referred as

Description : Registers in which data is entered or taken out in serial form are referred as   (A) left shift register (B) right shift register (C) shift registers (D) none of the above

Last Answer : Registers in which data is entered or taken out in serial form are referred as shift registers

________ is a high-speed real-time interface for serial bus and it has data transfer up to 400 Mbps. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : ________ is a high-speed real-time interface for serial bus and it has data transfer up to 400 Mbps. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : B. Fire wire

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Description : Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.

Last Answer : line speed

The advantage of self-correcting code is that

Last Answer : The advantage of self-correcting code is that It is easy to decode electronically.

A storage device or medium where the access time is dependent upon the location of the data is called ________ A. Parallel access B. Serial access C. Both (A) and (B) D. None of the above

Description : A storage device or medium where the access time is dependent upon the location of the data is called ________ A. Parallel access B. Serial access C. Both (A) and (B) D. None of the above

Last Answer : B. Serial access

__________ an external bus standard used for transferring data to and from digital devices. A. Serial Port B. Firewire C. Parallel Port D. USB

Description : __________ an external bus standard used for transferring data to and from digital devices. A. Serial Port B. Firewire C. Parallel Port D. USB

Last Answer : D. USB

__________ transmits one bit of data through a single wire. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : __________ transmits one bit of data through a single wire. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : A. Serial Port

__________ is an interface for connecting eight or more data wires. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : __________ is an interface for connecting eight or more data wires. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : C. Parallel Port

A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Description : A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Last Answer : B. DTE

The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Description : The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Last Answer : Ans: C The device which changes from serial data to parallel data is demultiplexer. (A demultiplexer takes in data from one line and directs it to any of its N outputs depending on the status of the select inputs.)

An interface that provides I/O transfer of data directly to and form the memory unit and peripheral is termed as________ A. DDA B. Serial interface C. Direct Memory Access (DMA) D. None of the Above

Description : An interface that provides I/O transfer of data directly to and form the memory unit and peripheral is termed as________ A. DDA B. Serial interface C. Direct Memory Access (DMA) D. None of the Above

Last Answer : C. Direct Memory Access (DMA)

Which operation is extremely useful in serial transfer of data: a. Logical micro operation b. Arithmetic micro operation c. Shift micro operation d. None of these

Description : Which operation is extremely useful in serial transfer of data: a. Logical micro operation b. Arithmetic micro operation c. Shift micro operation d. None of these

Last Answer : c. Shift micro operation

Which one of the following logic circuit has the highest speed as compared to the currently available logic

Description : Which one of the following logic circuit has the highest speed as compared to the currently available logic circuits? A) Resistance-transistor logic B) Emitter-coupled logic C) Integrated-injection logic D) Diode-transistor logic 

Last Answer : Which one of the following logic circuit has the highest speed as compared to the currently available logic circuits? A) Resistance-transistor logic B) Emitter-coupled logic C) Integrated-injection logic D) Diode-transistor logic 

Digital computers are more widely used as compared to analog computers, because they are

Last Answer : Digital computers are more widely used as compared to analog computers, because they are useful over wider ranges of problem types.

In counter flow compared to parallel flow, (A) LMTD is greater (B) Less surface area is required for a given heat transfer rate (C) Both (A) and (B) (D) More surface area is required for a given heat transfer rate

Description : In counter flow compared to parallel flow, (A) LMTD is greater (B) Less surface area is required for a given heat transfer rate (C) Both (A) and (B) (D) More surface area is required for a given heat transfer rate

Last Answer : (C) Both (A) and (B)

Above all, the advantage of competitive intelligence is that it allows you to: A. Measure your website data compared to your competitors B. Measure your website data in a vacuum C. See how much revenue your competitors are generating D. See how fast your company is growing

Description : Above all, the advantage of competitive intelligence is that it allows you to: A. Measure your website data compared to your competitors B. Measure your website data in a vacuum C. See how much revenue your competitors are generating D. See how fast your company is growing

Last Answer : A. Measure your website data compared to your competitors

Which of the following is an advantage to using fiber optics data transmission? a. resistance to data theft b. fast data transmission rate c. low noise level d. all of above

Description : Which of the following is an advantage to using fiber optics data transmission? a. resistance to data theft b. fast data transmission rate c. low noise level d. all of above

Last Answer : fast data transmission rate

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Description : The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Last Answer : C. data link

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

What are the disadvantage of serial transmission?

Description : What are the disadvantage of serial transmission?

Last Answer : Speed... a serial connection can only send one piece of data ata time. Parallel connections have multiple data 'channels' sendingdata simultaneously 0- which increases the data rateconsiderably.

What are examples of serial transmission?

Description : What are examples of serial transmission?

Last Answer : Feel Free to Answer

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

While there is (are) only _____ way(s) to send paralleldata, there is (are) three subclass(es) of serial transmission. A) one; two B) two; three C) one; three D) none of the above

Description : While there is (are) only _____ way(s) to send paralleldata, there is (are) three subclass(es) of serial transmission. A) one; two B) two; three C) one; three D) none of the above

Last Answer : one; three

Can a device designed to plug into a USB port also plug into a serial or parallel port?

Description : Can a device designed to plug into a USB port also plug into a serial or parallel port?

Last Answer : Generally, not easily. You can buy adaptors, but they don’t alwas work right.

A register capable of shifting its binary information either to the right or the left is called a_________ A. parallel register. B. serial register. C. shift register. D. storage register.

Description : A register capable of shifting its binary information either to the right or the left is called a_________ A. parallel register. B. serial register. C. shift register. D. storage register.

Last Answer : C. shift register.

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : (a) and (b)

In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Last Answer : Parallel

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Last Answer : b. ARP (Address Resolution Protocol)

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Last Answer : B. ARP Address Resolution Protocol

Printer attached on: a) Interface Port b) Serial Port c) Parallel Port d) SCSI e) None of These

Description : Printer attached on: a) Interface Port b) Serial Port c) Parallel Port d) SCSI e) None of These

Last Answer : c) Parallel Port

The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Description : The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Last Answer : (C) synchronous

Serial-to-parallel and parallel-to-serial conversions are accomplished by what type of circuit?

Description : Serial-to-parallel and parallel-to-serial conversions are accomplished by what type of circuit?

Last Answer : Shift register.

A shunt-type voltage regulator is connected in serial/parallel (which one) with the load resistance.

Description : A shunt-type voltage regulator is connected in serial/parallel (which one) with the load resistance.

Last Answer : In parallel.

An IC that contains A/D and D/A converters, companders, and parallel-to-serial converters is called

Description : An IC that contains A/D and D/A converters, companders, and parallel-to-serial converters is called

Last Answer : . Codec

Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a system, rather than serving as a main processor itself. iii) Because main Microprocessor handles the general program execution and the 8087 handles specialized math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Description : Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a ... math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Last Answer : c) iii only.

The conversation speed of an analog to digital converter is maximum with the following technique. (A) Dual slope AD converter. (B) Serial comparator AD converter. (C) Successive approximation AD converter. (D) Parallel comparator AD converter.

Description : The conversation speed of an analog to digital converter is maximum with the following technique. (A) Dual slope AD converter. (B) Serial comparator AD converter. (C) Successive approximation AD converter. (D) Parallel comparator AD converter.

Last Answer : (D) Parallel comparator AD converter.

Transmission of computerized data from one location to another is called A. data transfer B. data flow C. data communication D. data management E. None of the above

Description : Transmission of computerized data from one location to another is called A. data transfer B. data flow C. data communication D. data management E. None of the above

Last Answer : data communication

Find out number of data lines required to interface 16 LEDs arrange in the 4 x 4 matrix form.

Description : Find out number of data lines required to interface 16 LEDs arrange in the 4 x 4 matrix form.

Last Answer : 4+4=8, eight lines are required for 4x4 matrix of 16 LEDs

Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, ...

Description : Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, the number of characters that 1200 BPS communication line can transmit is

Last Answer : Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, the number of characters that 1200 BPS communication line can transmit is 12CPS.

Mention one advantage and one disadvantage of air transport. -Geography

Description : Mention one advantage and one disadvantage of air transport. -Geography

Last Answer : Advantage of air transport: It is very essential for a vast country like India where distances are large, and the terrain and the climatic conditions are so diverse. It is the fastest mode of ... Disadvantage of air transport: It is the costliest mode of transport which many people cannot afford.

(i) Mention three factors that affect water transport. (ii) Give one advantage and one disadvantage of water transport. -Geography

Description : (i) Mention three factors that affect water transport. (ii) Give one advantage and one disadvantage of water transport. -Geography

Last Answer : (i) The rivers and canals should have a regular flow of sufficient water. Diversion of water for irrigation purposes reduces the quantity of water. The presence of waterfalls or cataracts and ... cost. Disadvantage : Water transport cannot compete with the speed of road and rail transport.

(a) Draw a schematic representation of transport and exchange of oxygen and carbon dioxide during transportation of blood in human beings and label on it: Lung capillaries, Pulmonary artery to lungs, Aorta to body, Pulmonary veins from lungs. (b) What is the advantage of separate channels in mammals and birds for oxygenated and deoxygenated blood? -Biology

Description : (a) Draw a schematic representation of transport and exchange of oxygen and carbon dioxide during transportation of blood in human beings and label on it: Lung capillaries, Pulmonary artery to ... the advantage of separate channels in mammals and birds for oxygenated and deoxygenated blood? -Biology

Last Answer : (a) A schematic representation of transportation and exchange of oxygen and carbon dioxide during transportation of blood in human beings (b) It is necessary to separate oxygenated and deoxygenated ... . The separation of oxygenated and deoxygenated blood provides high oxygen supply to the organs.

What The human cerebrum is disproportionately large compared to the cerebrum of the other animals. What advantage does this give to humans?

Description : What The human cerebrum is disproportionately large compared to the cerebrum of the other animals. What advantage does this give to humans?

Last Answer : Need answer

What is the advantage of Hunter Douglas blinds compared to other brands?

Description : What is the advantage of Hunter Douglas blinds compared to other brands?

Last Answer : Hunter Douglas blinds offers a much more extensive selection of blinds to choose from. The blinds are also a higher quality blind, so even though they are more expensive, they last longer and will save you money in the long run.