Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, ...

Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, the number of characters that 1200 BPS communication line can transmit is

by

1 Answer

Answer :

Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, the number of characters that 1200 BPS communication line can transmit is 12CPS.

by

Related questions

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

How many characters per sec (7 bits + 1 parity ) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start and 1 stop bit)?

Description : How many characters per sec (7 bits + 1 parity ) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start and 1 stop bit)?

Last Answer : 1. 300 2. 240 3. 250 4. 275 Ans- 2400/(7+1+2) 240

Parity bit check is used to

Description : Parity bit check is used to

Last Answer : Parity bit check is used to Detect 1 bit error

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Each check bit is grouped with the information bits as specified by a__ a. Parity check code b. Parity check matrix c. Parity check bit d. All of these

Description : Each check bit is grouped with the information bits as specified by a__ a. Parity check code b. Parity check matrix c. Parity check bit d. All of these

Last Answer : b. Parity check matrix

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

A parity check usually can detect

Last Answer : A parity check usually can detect One-bit error.

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Simple parity check

What is used to identify whether a data word has an odd or even number of 1’s ? (1) Carry bit (2) Sign bit (3) Zero bit (4) Parity bit

Description : What is used to identify whether a data word has an odd or even number of 1’s ? (1) Carry bit (2) Sign bit (3) Zero bit (4) Parity bit

Last Answer : Parity bit

Which method is used to detect double errors and pinpoint erroneous bits. a. Even parity method b. Odd parity method c. Check sum method. d. All of these

Description : Which method is used to detect double errors and pinpoint erroneous bits. a. Even parity method b. Odd parity method c. Check sum method. d. All of these

Last Answer : c. Check sum method.

__is divided into a number of fields and is represented as a sequence of bits: a. instruction b. — instruction set c. instruction code d. parity code

Description : __is divided into a number of fields and is represented as a sequence of bits: a. instruction b. — instruction set c. instruction code d. parity code

Last Answer : a. instruction

How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is ...

Description : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  A) 300 B) 240 C) 250 D) 275

Last Answer : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  300

Classification of protocol that interprets a frame of data as a group of successive bit combined into predetermined pattern of fixed length, usually 8 bits each.

Description : Classification of protocol that interprets a frame of data as a group of successive bit combined into predetermined pattern of fixed length, usually 8 bits each.

Last Answer : Character and Byte-oriented protocols

For the 8-bit word 00111001, the check bits stored with it would be 0111. Suppose when the word is read from memory, the check bits are calculated to be 1101. What is the data word that was read from memory? (A) 10011001 (B) 00011001 (C) 00111000 (D) 11000110

Description : For the 8-bit word 00111001, the check bits stored with it would be 0111. Suppose when the word is read from memory, the check bits are calculated to be 1101. What is the data word that was read from memory? (A) 10011001 (B) 00011001 (C) 00111000 (D) 11000110

Last Answer : (B) 00011001

Which of the following is associated with error detector? A) Odd parity bit B) Even parity bit C) Both of the above D) None of above

Description : Which of the following is associated with error detector? A) Odd parity bit B) Even parity bit C) Both of the above D) None of above

Last Answer : Answer : C

Instructions and memory address are represented by A) Character code B) Binary codes C) Binary word D) Parity bit

Description : Instructions and memory address are represented by A) Character code B) Binary codes C) Binary word D) Parity bit

Last Answer : Answer : B

Which flag indicates the number of 1 bit that results from an operation? a) Zero b) Parity c) Auxiliary d) Carry

Description : Which flag indicates the number of 1 bit that results from an operation? a) Zero b) Parity c) Auxiliary d) Carry

Last Answer : Answer: b Explanation: The parity flag indicates the number of 1 bits in any operation. The resultant bit is called the parity bit. The main aim of the parity bit is to check for errors

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : Binary codes

Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Last Answer : Both of the above

How is the parity bit in each storage location used?

Description : How is the parity bit in each storage location used?

Last Answer : To detect errors in the circuitry.

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : b. Binary codes

Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Last Answer : c. Both of the above

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : b. Binary codes

Given code word 1110001010 is to be transmitted with even parity check bit. The encoded word to be transmitted for this code is (A) 11100010101 (B) 11100010100 (C) 1110001010 (D) 111000101

Description : Given code word 1110001010 is to be transmitted with even parity check bit. The encoded word to be transmitted for this code is (A) 11100010101 (B) 11100010100 (C) 1110001010 (D) 111000101

Last Answer : (A) 11100010101 

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Last Answer : 10,000 B frame

A computer or device that uses 8-bit ASCII or EBCDIC will use how many bits to store each character?

Description : A computer or device that uses 8-bit ASCII or EBCDIC will use how many bits to store each character?

Last Answer : Nine.

For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined

Description : For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined

Last Answer : d. Cannot be determined

The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Description : The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Last Answer : c. 7

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Last Answer : C. 1.9 bit

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Last Answer : c. 1.9 bit

The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Description : The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Last Answer : c. 7

What is the bit rate for transmitting uncompressed 800x600 pixel colour frames with 8 bits/pixel at 40 frames/second ? (A) 2.4 Mbps (B) 15.36 Mbps (C) 153.6 Mbps (D) 1536 Mbps

Description : What is the bit rate for transmitting uncompressed 800x600 pixel colour frames with 8 bits/pixel at 40 frames/second ? (A) 2.4 Mbps (B) 15.36 Mbps (C) 153.6 Mbps (D) 1536 Mbps 

Last Answer : (C) 153.6 Mbps Explanation: The number of bits/sec is just 800x600x40x8 or 153.6 Mbps.

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ................ (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Description : Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ... ...... (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Last Answer : Answer: Marks given to all

The number of comparators required in a 3-bit comparator type analog to digital converter is

Description : The number of comparators required in a 3-bit comparator type analog to digital converter is  A) 2 B) 3 C) 7 D) 8 

Last Answer : Number of comparators =2^n -1= 2^3 -1=7

The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B.

Description : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is  (A) 4 (B) 6 (C) 8 (D) 10

Last Answer : The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B. The number of combinations for which the output is logic 1, is 6

A 4 bit counter is used to count from 0,1,2...n. Value of “n” is

Description : A 4 bit counter is used to count from 0,1,2...n. Value of “n” is

Last Answer : A 4 bit counter is used to count from 0,1,2...n. Value of “n” is 15

In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor

Description : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be (A) 0.4 kΩ (B) 3 kΩ (C) 2.8 kΩ (D) 2.5 kΩ

Last Answer : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be 2.5 kΩ 

The number of comparators required in a 4 bit comparator type ADC is

Description : The number of comparators required in a 4 bit comparator type ADC is (A) 16 (B) 15 (C) 17 (D) 12

Last Answer : The number of comparators required in a 4 bit comparator type ADC is 15

Consider the representation of six-bit numbers by two’s complement,...

Description : Consider the representation of six-bit numbers by two’s complement, one’s complement, or by sign and magnitude: In which representation is there overflow from the addition of the integers 011000 and 011000?

Last Answer : Two’s complement, Sign and magnitude and one’s complement, Two’s complement and one’s complement

A six-bit alpha-numeric code is able to code?

Last Answer : A six-bit alpha-numeric code is able to code 64 characters.

A four bit number is given as 0110. Its 2’s complement is

Last Answer : A four bit number is given as 0110. Its 2’s complement is 1010.

The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Last Answer : DTE/DCE interface

The start and stop bits are used in serial communication for (A) error detection (B) error correction (C) synchronization (D) slowing down the communication

Description : The start and stop bits are used in serial communication for (A) error detection (B) error correction (C) synchronization (D) slowing down the communication

Last Answer : (C) synchronization