What is the signal strength of Bluetooth ?

What is the signal strength of Bluetooth ?
by

1 Answer

Answer :

The power of the signal transmitted by Bluetooth is milliwatts.
by

Related questions

Write the structure and procedure of Bluetooth ?

Description : Write the structure and procedure of Bluetooth ?

Last Answer : The structure and operation of Bluetooth Piconet is a basic component of Bluetooth system. The name of the network that can be formed through Bluetooth technology is Piconet, which can exchange ... assigns different time slots to different slave nodes and sends data to those matebak das nads.

Write the features of Bluetooth ?

Description : Write the features of Bluetooth ?

Last Answer : Features / Benefits of Bluetooth েন Open Wireless Protocol used over short distances. ল্প Short wave ( UHF-Ultra High Frequency) radio waves are used. It is PAN 's wireless based network i.e. ... there is a corner between the devices. পাস Passwords can be used for user control over the network.

What are the disadvantages of Bluetooth ?

Description : What are the disadvantages of Bluetooth ?

Last Answer : Answer : Disadvantages of Bluetooth: Bandwidth is relatively low. র The range of the network is so low that it is not possible to maintain communication over a distance of more than 100 meters. কম Less security in data transfer.

Write the use of Bluetooth ?

Description : Write the use of Bluetooth ?

Last Answer : Answer : Sound or voice data is transferred by connecting hands-free headset with the phone. This technology is used to transfer files from phone to computer. Other devices can be connected to the ... of health sensor data. Bluetooth is often used for control of areas where infrared is used.

What is Bluetooth ?

Description : What is Bluetooth ?

Last Answer : Bluetooth is a wireless communication system that creates communication between two or more devices.

What is Bluetooth ?

Description : What is Bluetooth ?

Last Answer : Bluetooth is an open wireless protocol for short-term data exchange.

Why does the company invent Bluetooth ?

Description : Why does the company invent Bluetooth ?

Last Answer : Swedish company was the first to invent Bluetooth.

In what year was Bluetooth invented ?

Description : In what year was Bluetooth invented ?

Last Answer : Bluetooth was invented in 1994.

What is Bluetooth Network ?

Description : What is Bluetooth Network ?

Last Answer : The network created by Bluetooth is called PAN .

Why is digital signal useful in computer case ? Explain ?

Description : Why is digital signal useful in computer case ? Explain ?

Last Answer : Binary number system is used in computer design. Digital devices operate in binary mode. There may be a switch off of the digital signal or the signal may be present or absent . These are similar to the binary number system. So digital signal is useful in computer case.

What is Cell Signal Encoding ?

Description : What is Cell Signal Encoding ?

Last Answer : The process of separating the signals sent from different transmitters with the help of encoding system is called cell signal encoding. FDMA (Frequency Division Multiple Access) and CDMA (Code Division ... or CDMA in different systems to provide multiple channels within a single cell coverage area .

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Answer : Analog systems use alternating analog electrical signals. An uninterrupted electrical signal is called an analog signal. Heat , pressure , flow are examples of some of the constantly changing ... electric waves. Radio , tape recorder , analog computer are some examples of analog methods.

What is a Signal Regenerating Repeater ?

Description : What is a Signal Regenerating Repeater ?

Last Answer : Signal Regenerating: It regenerates the signal after receiving it and eliminates noise or unneeded signals from it. This results in better network performance.

What is digital signal ?

Description : What is digital signal ?

Last Answer : Answer : Level-variable signals are used instead of sequentially analog signals in a numerical or digital manner. This signal is called digital or binary signal . Isolated electrical signals are called digital ... the non-magnetic state. The two levels of digital signal are specified by 0 and 1.

What is digital signal processor ?

Description : What is digital signal processor ?

Last Answer : The processor that converts analog signals into digital signals created by a high-powered instruction set is called a digital signal processor. The most popular DSP manufacturers are Texas Instrument ... 3 . Speech recognition 4 . Modem Function 5. Graphics Acceleration 6. Image Processing

Can anyone recommend a source for determining over the air TV signal strength in my neighborhood?

Description : Can anyone recommend a source for determining over the air TV signal strength in my neighborhood?

Last Answer : Here

How to Split an Ethernet Cable Without Losing Signal Strength?

Description : How to Split an Ethernet Cable Without Losing Signal Strength?

Last Answer : answer:I don't think you can split an ethernet cable, honestly. You could try a switch, which would let you plug in both your DVD player and router to the modem without causing some kind of IP ... plug the DvD player directly into that. Might save you a headache and a couple of bucks to boot.

Will aiming a wireless router antenna at my computer help signal strength?

Description : Will aiming a wireless router antenna at my computer help signal strength?

Last Answer : this article seems to say that, yes, with a few tweaks, you could do it.

How come cellphone signal-strength bars are so often wrong?

Description : How come cellphone signal-strength bars are so often wrong?

Last Answer : answer:Sometimes what you're seeing is the cell phone switching from one cell tower to another. Tower A gets further away and the phone switches to tower B. If that process goes wrong, the phone can't hand ... , that's weird. Could be the other person's phone, or you phone / service could be weird.

Reduction of signal strength during transmission is called attenuation. -Technology

Description : Reduction of signal strength during transmission is called attenuation. -Technology

Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.

Do CAT6 cables provide better signal strength than CAT5?

Description : Do CAT6 cables provide better signal strength than CAT5?

Last Answer : CAT6 cables do provide better signal strength and bandwith than CAT5, but for most purposes CAT5e will work just as well and be cheaper.

In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to maintain constant engine speed with increased load B. send a kilowatt signal to the metering circuit C. shutting down the prime mover in the event of reverse power to protect from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Description : In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to ... from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Last Answer : Answer: A

Comparing the signal strength arriving at the driven element from the desired direction to the signal strength reaching the driver from the opposite direction. A. Directivity B. Sensitivity C. Beamwidth D. Front-to-back ratio

Description : Comparing the signal strength arriving at the driven element from the desired direction to the signal strength reaching the driver from the opposite direction. A. Directivity B. Sensitivity C. Beamwidth D. Front-to-back ratio

Last Answer : D. Front-to-back ratio

A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW. What is the gain in dB, obtained by the use if the reflector. (Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Description : A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW ... Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Last Answer : B. 2.6

Very low signal strength in antenna. A. Minor lobes B. Null C. Antenna patterns D. Major lobes

Description : Very low signal strength in antenna. A. Minor lobes B. Null C. Antenna patterns D. Major lobes

Last Answer : B. Null

The difference between signal strength at a given point and a reference level is________. A. power B. dBm C. level D. ratio

Description : The difference between signal strength at a given point and a reference level is________. A. power B. dBm C. level D. ratio

Last Answer : C. level

A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 kW. What is the gain in dB obtain by the use of the reflector ? ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Description : A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 ... ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Last Answer : D. 2.6

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Description : Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Last Answer : attenuation

________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Distortion

________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Attenuation

What is Signal Strength?

Description : What is Signal Strength?

Last Answer : For the signal to be passed from one neuron to the next it must have enough energy to break a point called the threshold. Once the threshold is broken the signal is transmitted. The neuron fires ... is decided by how many different neurons are being fired and at what frequency they are being fired.

If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Description : If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Last Answer : Vertically polarized.

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Description : ..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Last Answer : (A) Attenuation