Do CAT6 cables provide better signal strength than CAT5?

Do CAT6 cables provide better signal strength than CAT5?
by

1 Answer

Answer :

CAT6 cables do provide better signal strength and bandwith than CAT5, but for most purposes CAT5e will work just as well and be cheaper.
by

Related questions

Is there a difference between CAT5 cable and CAT6 cables?

Description : Is there a difference between CAT5 cable and CAT6 cables?

Last Answer : Cat6 is 250 MHz and cat5 is just 100.

What is the Ethernet/LAN cable used in RPi? A.Cat5 B.at5e C. cat6 D . RJ45

Description : What is the Ethernet/LAN cable used in RPi? A.Cat5 B.at5e C. cat6 D . RJ45

Last Answer : D . RJ45 

In the cables, sheaths are used to (a) prevent the moisture from entering the cable (b) provide enough strength (e) provide proper insulation (d) none of the above

Description : In the cables, sheaths are used to (a) prevent the moisture from entering the cable (b) provide enough strength (e) provide proper insulation (d) none of the above

Last Answer : (a) prevent the moisture from entering the cable

Can you extend USB over CAT5?

Description : Can you extend USB over CAT5?

Last Answer : Yes, USB cables can be extended using CAT5 networking cables. You don't need to cut the wires and combine them yourself though, as there are many cables and hardware solutions available for purchase now.

What is the difference between CAT5e and CAT6?

Description : What is the difference between CAT5e and CAT6?

Last Answer : CAT6 doubles the bandwidth of CAT5 and CAT5e to 250 mhz. It is backwards compatible with CAT5, so is a good choice of cable if you aren't sure what to choose.

Do flat Ethernet cables degrade the signal more than their round cousins?

Description : Do flat Ethernet cables degrade the signal more than their round cousins?

Last Answer : I don’t know but we have round ones here…

The physical layer provides __________a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Last Answer : d. all of the mentioned

The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal levelC. specification for IR over optical fiber D. all of the mentioned

Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Last Answer : d) all of the mentioned

Emulsifier protection is associated with: a) Grounding protection b) Dielectric strength protection of cables and conductors c) Lightning protection d) Fire protection

Description : Emulsifier protection is associated with: a) Grounding protection b) Dielectric strength protection of cables and conductors c) Lightning protection d) Fire protection

Last Answer : Ans: D

Do these computer desks provide a place for the cables to run through?

Description : Do these computer desks provide a place for the cables to run through?

Last Answer : Many computer desks have openings built into it in which to thread cables and wires through and thus making the work space tidy. Desks without these openings, especially older desk, can be drilled to have openings in the appropriate size and location to use for the same purpose.

A low power, short range wireless technology designed to provide a replacement for serial cables is called ______. A. WAP B. GPRS C. Bluetooth D. EDGE

Description : A low power, short range wireless technology designed to provide a replacement for serial cables is called ______. A. WAP B. GPRS C. Bluetooth D. EDGE

Last Answer : C. Bluetooth

The intersheaths in the cables are used to (a) minimize the stress (b) avoid the requirement of good insulation (c) provide proper stress distribution (d) none of the above

Description : The intersheaths in the cables are used to (a) minimize the stress (b) avoid the requirement of good insulation (c) provide proper stress distribution (d) none of the above

Last Answer : (c) provide proper stress distribution

Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Description : Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Last Answer : (D) Welding takes more time than riveting

In the UK wholesaling is not as important in consumer markets. This is MAINLY because: A)manufacturers prefer to deal direct with retailers B)of the strength of large national retailers C)wholesaling costs are higher in the UK than elsewhere D)UK wholesalers provide a more limited range of services than in other European markets.

Description : In the UK wholesaling is not as important in consumer markets. This is MAINLY because: A)manufacturers prefer to deal direct with retailers B)of the strength of large national retailers C) ... elsewhere D)UK wholesalers provide a more limited range of services than in other European markets.

Last Answer : B)of the strength of large national retailers

Can anyone recommend a source for determining over the air TV signal strength in my neighborhood?

Description : Can anyone recommend a source for determining over the air TV signal strength in my neighborhood?

Last Answer : Here

How to Split an Ethernet Cable Without Losing Signal Strength?

Description : How to Split an Ethernet Cable Without Losing Signal Strength?

Last Answer : answer:I don't think you can split an ethernet cable, honestly. You could try a switch, which would let you plug in both your DVD player and router to the modem without causing some kind of IP ... plug the DvD player directly into that. Might save you a headache and a couple of bucks to boot.

Will aiming a wireless router antenna at my computer help signal strength?

Description : Will aiming a wireless router antenna at my computer help signal strength?

Last Answer : this article seems to say that, yes, with a few tweaks, you could do it.

How come cellphone signal-strength bars are so often wrong?

Description : How come cellphone signal-strength bars are so often wrong?

Last Answer : answer:Sometimes what you're seeing is the cell phone switching from one cell tower to another. Tower A gets further away and the phone switches to tower B. If that process goes wrong, the phone can't hand ... , that's weird. Could be the other person's phone, or you phone / service could be weird.

Reduction of signal strength during transmission is called attenuation. -Technology

Description : Reduction of signal strength during transmission is called attenuation. -Technology

Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.

What is the signal strength of Bluetooth ?

Description : What is the signal strength of Bluetooth ?

Last Answer : The power of the signal transmitted by Bluetooth is milliwatts.

In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to maintain constant engine speed with increased load B. send a kilowatt signal to the metering circuit C. shutting down the prime mover in the event of reverse power to protect from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Description : In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to ... from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Last Answer : Answer: A

Comparing the signal strength arriving at the driven element from the desired direction to the signal strength reaching the driver from the opposite direction. A. Directivity B. Sensitivity C. Beamwidth D. Front-to-back ratio

Description : Comparing the signal strength arriving at the driven element from the desired direction to the signal strength reaching the driver from the opposite direction. A. Directivity B. Sensitivity C. Beamwidth D. Front-to-back ratio

Last Answer : D. Front-to-back ratio

A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW. What is the gain in dB, obtained by the use if the reflector. (Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Description : A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW ... Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Last Answer : B. 2.6

Very low signal strength in antenna. A. Minor lobes B. Null C. Antenna patterns D. Major lobes

Description : Very low signal strength in antenna. A. Minor lobes B. Null C. Antenna patterns D. Major lobes

Last Answer : B. Null

The difference between signal strength at a given point and a reference level is________. A. power B. dBm C. level D. ratio

Description : The difference between signal strength at a given point and a reference level is________. A. power B. dBm C. level D. ratio

Last Answer : C. level

A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 kW. What is the gain in dB obtain by the use of the reflector ? ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Description : A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 ... ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Last Answer : D. 2.6

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Description : Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Last Answer : attenuation

________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Distortion

________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Attenuation

What is Signal Strength?

Description : What is Signal Strength?

Last Answer : For the signal to be passed from one neuron to the next it must have enough energy to break a point called the threshold. Once the threshold is broken the signal is transmitted. The neuron fires ... is decided by how many different neurons are being fired and at what frequency they are being fired.

If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Description : If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Last Answer : Vertically polarized.

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Description : ..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Last Answer : (A) Attenuation

Which components provide the regenerative feedback signal in the phase-shift oscillator?

Description : Which components provide the regenerative feedback signal in the phase-shift oscillator?

Last Answer : Resistor-capacitor networks.

Communication satellites are used to: (1) To transmit communication signals (2) To receive and redirect communication signals (3) To only receive communication signal (4) To provide information of national sources only

Description : Communication satellites are used to: (1) To transmit communication signals (2) To receive and redirect communication signals (3) To only receive communication signal (4) To provide information of national sources only

Last Answer : To receive and redirect communication signals

High strength concrete is used in pre-stressed member (A) To overcome high bearing stresses developed at the ends (B) To overcome bursting stresses at the ends (C) To provide high bond stresses (D) All the above

Description : High strength concrete is used in pre-stressed member (A) To overcome high bearing stresses developed at the ends (B) To overcome bursting stresses at the ends (C) To provide high bond stresses (D) All the above

Last Answer : Answer: Option D

In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Description : In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Last Answer : (d) Iron oxide

Multiple universal joint are preferred over single joint because they : A. provide higher strength B. minimize speed fluctuation C. are lighter in weight D. are more flexible

Description : Multiple universal joint are preferred over single joint because they : A. provide higher strength B. minimize speed fluctuation C. are lighter in weight D. are more flexible

Last Answer : B. minimize speed fluctuation

The ‘sheath’ is used in cable to (A) provide strength to the cable. (B) provide proper insulation. (C) prevent the moisture from entering the cable. (D) avoid chances of rust on strands.

Description : The ‘sheath’ is used in cable to (A) provide strength to the cable. (B) provide proper insulation. (C) prevent the moisture from entering the cable. (D) avoid chances of rust on strands.

Last Answer : Ans: A The sheath in underground cable is provided to give mechanical strength.

1. If the current in the core decreases, what will the strength of the magnetic field be? 2. What is the commonly used unit for measuring the speed of data transmission? 3. The Govt. of India does not provide any direct financial assistance to which scheme? 4. Why is fog common around Newfoundland coast? 5. When Raja Wodeyar founded the kingdom of Mysore, who was the ruler of the Vijayanagar Empire?

Description : 1. If the current in the core decreases, what will the strength of the magnetic field be? 2. What is the commonly used unit for measuring the speed of data transmission? 3. The Govt. of ... flows between the Vindhya and Satpura ranges? 20. Which was a journal brought out by Abul Kalam Azad ?

Last Answer : Answer : 1. Decreases 2. Bits per second 3. Jeevan Sathi Yojana 4. Because warm and cold currents meet 5. Ranga II 6. Fatty tissue 7. Uttar Pradesh 8. Oil gas 9. Silvassa 10. Hunter 11. Sports ... 16. Speaker 17. Because of inadequate supply of air 18. Growth of GNP 19. Narmada 20. Al -Hilal

Why fuses with fusing factor more than 1.5 is not allowed in PVC cables?

Description : Why fuses with fusing factor more than 1.5 is not allowed in PVC cables? 

Last Answer : Because PVC cables have low thermal capacity than paper cables. Full loading of PVC only possible if it has close excess current protection (i.e.) Fusing Factor = 1.5 

Optical fibers or cables should never be bent at a radius of curvature smaller than a certain value. Identify this radius of curvature Optical fibers or cables should never be bent at a radius of curvature smaller than a certain value. Identify this radius of curvature

Description : Optical fibers or cables should never be bent at a radius of curvature smaller than a certain value. Identify this radius of curvature

Last Answer : Minimum bend radius.

State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) Minimum clearance between cable and water pipe line when running in parallel. (iii) If cable is laid through pipe what should be diameter of pipe. (iv) When more than one cable is to be laid in the same trench, what should be minimum spacing between two cables ?

Description : State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) ... is to be laid in the same trench, what should be minimum spacing between two cables ?  

Last Answer : (i) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr. (ii) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr ... should be minimum spacing between two cables :- Then minimum 30 cm spacing is provided between 2 cables