What is Signal Strength?

What is Signal Strength?
by

1 Answer

Answer :

For the signal to be passed from one neuron to the next it must have enough energy to break a point called the threshold. Once the threshold is broken the signal is transmitted. The neuron fires at the same strength every time. The strength of a signal is decided by how many different neurons are being fired and at what frequency they are being fired.
by

Related questions

What is The Transmission of the Signal?

Description : What is The Transmission of the Signal?

Last Answer : The transmission of the signal is basically the same in all cells, the signal is sent across the synapse by the axon and the dendrite of the next cell picks up the signal.

The advantage of the silicone in soft relining material over ….. rubber is, A. Retains high flow B. Prevents the colonization of Candida albicans C. Resilient in long run D. Better bond strength

Description : The advantage of the silicone in soft relining material over ….. rubber is, A. Retains high flow B. Prevents the colonization of Candida albicans C. Resilient in long run D. Better bond strength

Last Answer : C. Resilient in long run

The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Last Answer : B. Percent elongation

Which of the following is the most significant factor regarding filler in composite for increased strength: A. Particle size 1-3 micron B. Sub micron sized particles C. High concentration of the filler particles

Description : Which of the following is the most significant factor regarding filler in composite for increased strength: A. Particle size 1-3 micron B. Sub micron sized particles C. High concentration of the filler particles

Last Answer : C. High concentration of the filler particles

High copper amalgam lasts longer than low copper amalgam because of:** A. Increased compressive strength B. Increased corrosion resistance C. High creep D. Increased tensile strength E. Decreased setting expansion

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

To reduce the risk of side effects of local anaesthetic injections; you should follow all of the following EXCEPT: A. Aspirate before injection B. Use the smallest effective volume C. Use the weakest efficient percentage strength D. Inject rapidly

Description : To reduce the risk of side effects of local anaesthetic injections; you should follow all of the following EXCEPT: A. Aspirate before injection B. Use the smallest effective volume C. Use the weakest efficient percentage strength D. Inject rapidly

Last Answer : D. Inject rapidly

If amalgam gets contaminated with moisture, the most uncommon result is:** A. Blister formation B. Post operative pain C. Secondary caries D. Lower compressive strength

Description : If amalgam gets contaminated with moisture, the most uncommon result is:** A. Blister formation B. Post operative pain C. Secondary caries D. Lower compressive strength

Last Answer : C. Secondary caries

.The main advantage of amalgam with high content of Cu is: A. Better marginal sealing B. Less corrosion C. Better tensile strength D. Higher and immediate compressive strength

Description : .The main advantage of amalgam with high content of Cu is: A. Better marginal sealing B. Less corrosion C. Better tensile strength D. Higher and immediate compressive strength

Last Answer : B. Less corrosion

What is the function of gypsum-binder in the investment:** A. Setting and hydroscopic B. Strength and rigidity

Description : What is the function of gypsum-binder in the investment:** A. Setting and hydroscopic B. Strength and rigidity

Last Answer : B. Strength and rigidity

Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than the original impression C. The strength of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Description : Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than ... of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Last Answer : A. They lack accurate reproduction of surface details

.In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. A higher coefficient of thermal expansion and a lower crashing strength C. A lower coefficient of thermal expansion and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Description : .In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. ... and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Last Answer : B. A higher coefficient of thermal expansion and a lower crashing strength

Which of the following restoration material’s strength is not effected by pins: A. Amalgam B. Composite resin

Description : Which of the following restoration material’s strength is not effected by pins: A. Amalgam B. Composite resin

Last Answer : B. Composite resin

Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Last Answer : E. Elastic limit was exceeded

The term TUGback is related to ( “When used in connection with a master Gutta Percha cone in endodontics)” : A. Tensile strength of the gutta percha B. Consistency of gutta percha C. Size of the cone D. Fit of the cone in the apical 1 or 2 mm E. Length of the cone

Description : The term TUGback is related to ( “When used in connection with a master Gutta Percha cone in endodontics)” : A. Tensile strength of the gutta percha B. Consistency of gutta percha C. Size of the cone D. Fit of the cone in the apical 1 or 2 mm E. Length of the cone

Last Answer : D. Fit of the cone in the apical 1 or 2 mm

What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Description : What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Last Answer : C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Can anyone recommend a source for determining over the air TV signal strength in my neighborhood?

Description : Can anyone recommend a source for determining over the air TV signal strength in my neighborhood?

Last Answer : Here

How to Split an Ethernet Cable Without Losing Signal Strength?

Description : How to Split an Ethernet Cable Without Losing Signal Strength?

Last Answer : answer:I don't think you can split an ethernet cable, honestly. You could try a switch, which would let you plug in both your DVD player and router to the modem without causing some kind of IP ... plug the DvD player directly into that. Might save you a headache and a couple of bucks to boot.

Will aiming a wireless router antenna at my computer help signal strength?

Description : Will aiming a wireless router antenna at my computer help signal strength?

Last Answer : this article seems to say that, yes, with a few tweaks, you could do it.

How come cellphone signal-strength bars are so often wrong?

Description : How come cellphone signal-strength bars are so often wrong?

Last Answer : answer:Sometimes what you're seeing is the cell phone switching from one cell tower to another. Tower A gets further away and the phone switches to tower B. If that process goes wrong, the phone can't hand ... , that's weird. Could be the other person's phone, or you phone / service could be weird.

Reduction of signal strength during transmission is called attenuation. -Technology

Description : Reduction of signal strength during transmission is called attenuation. -Technology

Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.

What is the signal strength of Bluetooth ?

Description : What is the signal strength of Bluetooth ?

Last Answer : The power of the signal transmitted by Bluetooth is milliwatts.

Do CAT6 cables provide better signal strength than CAT5?

Description : Do CAT6 cables provide better signal strength than CAT5?

Last Answer : CAT6 cables do provide better signal strength and bandwith than CAT5, but for most purposes CAT5e will work just as well and be cheaper.

In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to maintain constant engine speed with increased load B. send a kilowatt signal to the metering circuit C. shutting down the prime mover in the event of reverse power to protect from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Description : In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to ... from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Last Answer : Answer: A

Comparing the signal strength arriving at the driven element from the desired direction to the signal strength reaching the driver from the opposite direction. A. Directivity B. Sensitivity C. Beamwidth D. Front-to-back ratio

Description : Comparing the signal strength arriving at the driven element from the desired direction to the signal strength reaching the driver from the opposite direction. A. Directivity B. Sensitivity C. Beamwidth D. Front-to-back ratio

Last Answer : D. Front-to-back ratio

A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW. What is the gain in dB, obtained by the use if the reflector. (Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Description : A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW ... Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Last Answer : B. 2.6

Very low signal strength in antenna. A. Minor lobes B. Null C. Antenna patterns D. Major lobes

Description : Very low signal strength in antenna. A. Minor lobes B. Null C. Antenna patterns D. Major lobes

Last Answer : B. Null

The difference between signal strength at a given point and a reference level is________. A. power B. dBm C. level D. ratio

Description : The difference between signal strength at a given point and a reference level is________. A. power B. dBm C. level D. ratio

Last Answer : C. level

A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 kW. What is the gain in dB obtain by the use of the reflector ? ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Description : A dipole antenna requires to be feed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11 ... ( Gain referred to this particular dipole) A. 4.24 B. 1.81 C. 4.75 D. 2.6

Last Answer : D. 2.6

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Description : Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Last Answer : attenuation

________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Distortion

________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Attenuation

If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Description : If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Last Answer : Vertically polarized.

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Description : ..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Last Answer : (A) Attenuation

Explain the left hemisphere area related to language?

Description : Explain the left hemisphere area related to language?

Last Answer : The first language area within the left hemisphere to be discovered is Broca's area, named after Paul Broca, who discovered the area while studying patients with aphasia, a language disorder. Broca's area doesn't ... the difference between "The boy was hit by the girl" and "The girl hit the boy."

Define the treatment of Muscular Dystrophy ?

Description : Define the treatment of Muscular Dystrophy ?

Last Answer : There is no specific treatment to stop or reverse any form of MD. Treatment may include physical therapy, respiratory therapy, speech therapy, orthopedic appliances used for support, and ... may need assisted ventilation to treat respiratory muscle weakness and a pacemaker for cardiac abnormalities.

Which area of the brain is related to language?

Description : Which area of the brain is related to language?

Last Answer : The two hemispheres are thought to contribute to the processing and understanding of language: the left hemisphere processes the linguistic meaning of prosody (or, the rhythm, stress, and intonation ... brains are capable of adapting to difficult circumstances, if the df.mage occurs early enough.

What are the Effects of brain damage?

Description : What are the Effects of brain damage?

Last Answer : A key source of information about the function of brain regions is the effects of damage to them. In humans, strokes have long provided a "natural laboratory" for studying the effects of brain ... often crosses into multiple regions of the brain, not along clear-cut borders, making it difficult to

Write a brief note on MEG?

Description : Write a brief note on MEG?

Last Answer : Apart from measuring the electric field around the skull it is possible to measure the magnetic field directly in a technique known asmagnetoencephalography (MEG). This technique has the same temporal ... dendrites oriented in a way that gives rise to detectable magnetic fields outside the skull.

Write a brief note on EEG?

Description : Write a brief note on EEG?

Last Answer : By placing electrodes on the scalp it is possible to record the summed electrical activity of the cortex, in a technique known aselectroencephalography (FEG). EEG measures mass changes in ... thousandths of a second. EEG recordings have good temporal resolution, but poor spatial resolution.

Explain the Functional divisions of cortex?

Description : Explain the Functional divisions of cortex?

Last Answer : Researchers who study the functions of the cortex divide it into three functional categories of regions, or areas. One consists of the primary sensory areas, which receive signals from the sensory ... and are involved in the complex process that we call perception, thought, and decision making.

Explain the structure of cerebral cortex?

Description : Explain the structure of cerebral cortex?

Last Answer : The cerebral cortex is essentially a sheet of neural tissue, folded in a way that allows a large surface area to fit within the confines of the skull. Each cerebral hemisphere, in fact, has a ... .3 square feet. Anatomists call each cortical fold asulcus, and the smooth area between folds a gyrus.

What is the dominant feature of human brain?

Description : What is the dominant feature of human brain?

Last Answer : The dominant feature of the human brain is corticalization. The cerebral cortex in humans is so large that it overshadows every other part of the brain. A few subcortical structures show alterations reflecting this ... the rat and the cat, to more complex ones, such as the chimpanzee and the human.

Write a short note on the damage and diseases of the brain?

Description : Write a short note on the damage and diseases of the brain?

Last Answer : The human brain is inclined to many types of damage and disease. The most common forms of physical damage are closed head injuries such as a blow to the head, a stroke, or poisoning by ... at least partially by brain dysfunctions, although the nature of such brain anomalies is not well understood.

What are the major tasks of brain?

Description : What are the major tasks of brain?

Last Answer : The brain performs an incredible number of tasks: It controls body temperature, blood pressure, heart rate and breathing. It accepts a flood of information about the world around you from ... skull, suspended in cerebrospinal fluid, and isolated from the bloodstream by the blood-brain barrier.

Write the names of Cerebral Cortex Lobes?

Description : Write the names of Cerebral Cortex Lobes?

Last Answer : •Frontal Lobes • Occipital Lobes •Parietal Lobes • Temporal Lobes

What is Cerebral Cortex?

Description : What is Cerebral Cortex?

Last Answer : •Outer portion (1.5mm to 5mm) of the cerebrum •Receives and processes sensory information •Divided into cerebral cortex lobes

What is Cerebellum?

Description : What is Cerebellum?

Last Answer : •Controls movement coordination •Maintains balance and equilibrium

What is Central Sulcus (Fissure of Rolando)?

Description : What is Central Sulcus (Fissure of Rolando)?

Last Answer : Central sulcus is a Deep grove that separates the parietal and frontal lobes