What happens when heat is added to silicon ?

1 Answer

Answer :

happens when heat is added to silicon?

Related questions

Description : What happens when is heat is added to silicon?

Last Answer : happens when heat is added to silicon?

Description : What happens when a catalyst is added to a system at equilibrium? A The reaction follows an alternative pathway of lower activation energy. B The heat of reaction decreases. C The potential ... decreases. D The potential energy of the products decreases. E The rate of chemical reaction decreases.

Last Answer : A The reaction follows an alternative pathway of lower activation energy.

Description : __________ is added in low carbon steel to raise its yield point. (A) Sulphur (B) Phosphorous (C) Silicon (D) Manganese

Last Answer : (D) Manganese

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

Description : Impurity atoms to be added to pure silicon in order to make a p-type semiconductor belongs to (a) Phosphorous (b) Boron (c) Antimony (d) Aluminium 

Last Answer : Boron  , a  group  three  element.

Description : How is silicon carbide formed? OR What happens when silicon and coke are heated?

Last Answer : When a mixture of silicon and coke is heated in an electric furnace, silicon carbide is formed. It is an endothermic reaction. Si + C SiC

Description : What happens when silicon is burnt in air?

Last Answer : Silicon burns brilliantly in air and vigorously in oxygen to form silicon dioxide. It is an exothermic reaction. Si + O 2 SiO 2

Description : What happens when amorphous silicon is heated?

Last Answer : When amorphous silicon is heated in air, it oxidizes at the surface level & catches fire.

Description : Inside the ____ is a gas generator containing a mixture of NaN3 (Sodium Azide), KNO3 (Potassium Nitrate) and SiO2 (Silicon Dioxide). When the undesired event happens, an electric circuit is ... chemical reactions generate nitrogen gas that fills ____ in 20 to 30 milliseconds. Fill up the blank

Last Answer : Air-bags in automobiles.

Description : Which of the following types of insulation will begin to deteriorate FIRST as a result of the heat generated in the conductor it surrounds? A. Varnished cloth B. Rubber C. Silicon D. Asbestos

Last Answer : Answer: B

Description : Metalloids (A) Are good conductor of heat & electricity (B) Act as electron donors with metals & as electron acceptor with non metals (C) Are not necessarily solids at room temperature ... & non-metallic properties to some extent and are exemplified by elements like germanium, silicon & boron

Last Answer : D) Are compounds that exhibit both metallic & non-metallic properties to some extent and are exemplified by elements like germanium, silicon & boron

Description : Describe an activity to observe what happens when quick lime is added to water taken in a beaker. State two important observations and name the type of reaction taking place. -Chemistry

Last Answer : Answer. Aim: To observe what happens when quicklime is added to water taken in a beaker. Materials Required:- Quicklime (calcium oxide), water, beaker.Procedure: 1. Take 5 g of calcium oxide in a ... example for each of decomposion reaction carried out with help of (i) Electricity (ii) Heat (iii)

Description : (a) Write the essential condition for the following reaction to take place: 2AgBr--> 2Ag + Br2 Write one application of this reaction. (b) Complete the following chemical equation of a chemical ... science-5 (c) What happens when water is added to quick line. Write chemical equation. -Chemistry

Last Answer : Answer. This reaction is used in photography. (c) Slaked lime is formed with hissing sound and lot of heat is envolved.

Description : What happens when metal is added to a metal ? F and j are in the field.

Last Answer : answer is yes.

Description : What happens when lime is added to water ?

Last Answer : : Adding water to lime produces heat and calcium hydroxide

Description : What Happens When Information is Added , Processed and Stored ?

Last Answer : Information technology is associated with the distribution , processing and storage of information.

Last Answer : Adding ammonium chloride to water reduces water temperature.

Last Answer : Battery capacity decreases and plate can be damaged.

Description : What happens when `H_(2)SO_(4)` added to `CaF_(2)`

Last Answer : What happens when `H_(2)SO_(4)` added to `CaF_(2)` A. Gives `CaSO_(4)` B. Gives HF C. Gives 1 & 2 D. Gives `CaHF_(2)`

Description : What happens to the particles of a substance when energy is added to it?

Last Answer : Need answer

Description : When phenolphthalein is added to a basic solution what happens?

Last Answer : Phenolphthalein is added to a basic solution is colorless.

Description : What happens when caustic soda is added to vinegar?

Last Answer : Caustic soda is sodium hydroxide (NaOH), which is a strong base. Vinegar, a weak acid, is dilute acetic acid (CH3COOH). When combined, they undergo a neutralization reaction producing water and the salt sodium ... chemical equation is written below.NaOH(aq) + CH3COOH(aq) --> H2O(l) + NaCH3COO(aq)

Description : What happens to an electrical field around a single charge when another charge is added to the system?

Last Answer : What is the answer ?

Description : What happens to the energy added during a phase change apex?

Last Answer : What is the answer ?

Description : What happens when iodine is added to cornstarch?

Last Answer : Need answer

Description : What happens when a drop of glycerol is added to crushed KMnO4 spread on a paper? (1) There is a crackling sound (2) There is a violent explosion (3) There is no reaction (4) The paper ignites

Last Answer : (2) There is a violent explosion Explanation: When solid Potassium Permanganate (KMnO4) is mixed with pure glycerol or other simple alcohols, it will result in a violent combustion ... Permanganate is an extremely powerful oxidizer which spontaneously ignites after coming in contact with glycerol.

Description : What happens when lime stone is not added during the extraction of iron?

Last Answer : If limestone is not added to charge during the extraction of iron, the blast furnace will get blocked.

Description : What happens when? a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. b) A pinch of mercuric oxide is kept in a test tube. c)A small crystal of silver nitrate is dissolved in distilled water and a drop of ammonium hydroxide & a pinch of glucose powder are added.

Last Answer : a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. After a few hours a coating of copper is seen on iron nail/plate. It is based on displacement reaction. ... on the inner walls of the test tube. Aldehyde group in glucose reduced silver nitrate to metallic silver.

Description : What happens to a gold sol if gelatin is added to it ?

Last Answer : Ans. It causes stabilisation of gold sol. 

Description : What happens when a drop of glycerol is added to crushed KMnO4 spread on a paper ? (1) There is a crackling sound. (2) There is a violent explosion. (3) There is no reaction. (4) The paper ignites.

Last Answer : There is a violent explosion.

Description : When heat is added to or removed from a substance it may change its state. What state will most likely result if heat is added to a liquid?

Last Answer : A gas.

Description : When you heat a pot of water over a flame what form of energy is added to the water why?

Last Answer : Need answer

Description : How A 500 g piece of iron changes 7 C when heat is added. How much heat energy in joules is produced due to this change in temperature?

Last Answer : Need answer

Description : What happen when heat is added to liquid?

Last Answer : When heated, the particles in a liquid move faster.They collide with one another and take up more space so the liquid as a whole expands.

Description : Can a heat pump be added to an above ground pool?

Last Answer : Although it is advisable to check your manufacturer specifications, there are heat pumps available for above ground pools. You should expect to pay about $2,000.00 (+/-) for the unit itself plus any installations costs.

Description : How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Last Answer : The amount of NO and SO3 would increased.

Description : In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer b. Diesel cycle

Description : In which of the following cycle heat is added at constant volume? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer a. Otto cycle

Description : When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Last Answer : (1) heat is liberated Explanation: When quick lime is added to water, then a chemical reaction takes places and slaked lime is formed, evolving heat in this process. It makes the water boil.

Description : Antioxidants are added to rubber to protect it from the attack of light, heat & atmospheric ozone. Which of the following is an antioxidant used in rubber? (A) Carbon (B) Alkylated diphenyl amine (C) Thiokol (D) Magnesium

Last Answer : (B) Alkylated diphenyl amine

Description : Which of the following is a correct observation when water is added to substance ̳X‘ (a) vigorous bubbling and a hissing sound (b) slow bubbling with no sound (c) vigorous bubbling with evolution of heat and a hissing sound (d) only hissing sound

Last Answer : (c) vigorous bubbling with evolution of heat and a hissing sound

Description : In a Rankine cycle, regeneration results in higher efficiency because (a) Pressure inside the boiler increases [GATE-2003] (b) Heat is added before steam enters the low pressure turbine (c) ... temperature of heat addition in the boiler increases (d) Total work delivered by the turbine increases 

Last Answer : (c) Average temperature of heat addition in the boiler increases  

Description : Heat is added at constant pressure in an ideal __________ cycle. (A) Stirling (B) Brayton (C) Rankine (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : Evaporative cooling process employs a combination of cooling and humidification in which the (A) Sensible heat is added (B) Sensible heat is removed and the latent heat is added (C) Latent heat is removed (D) Sensible heat is added and latent heat is removed

Last Answer : Option B

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

Description : Upto the critical radius of insulation, added insulation, will (A) Increase the heat loss (B) Decrease heat loss and will have no effect beyond that (C) Decrease heat flux (D) Reduce convection heat loss compared to conduction heat less

Last Answer : Option B

Description : Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Last Answer : Answer: Option D

Description : The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases

Last Answer : (B) Decreases

Description : Which is not true about Heat (Q):  a. Q is positive when heat is added to the body or system  b. Q is negative when heat is rejected by the body or system  c. Q is positive when heat is rejected by the body or system  d. None of the above

Last Answer : Q is positive when heat is rejected by the body or system

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ