When you heat a pot of water over a flame what form of energy is added to the water why?

When you heat a pot of water over a flame what form of energy is added to the water why?
by

1 Answer

Answer :

Need answer
by

Related questions

Use of excess of combustion air in the combustion of fuels results in (A) Heat losses (B) Long flame (C) Condensation of water vapour from the fuel gas (D) None of these

Description : Use of excess of combustion air in the combustion of fuels results in (A) Heat losses (B) Long flame (C) Condensation of water vapour from the fuel gas (D) None of these

Last Answer : (A) Heat losses

Can you heat alcohol on an open flame?

Description : Can you heat alcohol on an open flame?

Last Answer : No, because ethanol is flammable.

A glass chimney stops an oil lamp from smoking because: A. It increases the supply of oxygen to the flame by convection B. The heat produced ensures complete C. Both to these (Answer) D. Neither of these

Description : A glass chimney stops an oil lamp from smoking because: A. It increases the supply of oxygen to the flame by convection B. The heat produced ensures complete C. Both to these (Answer) D. Neither of these

Last Answer : C. Both to these (Answer)

Oxygen enrichment of combustion air does not result in increase of the (A) Flame temperature (B) Oxygen in the flue gas (C) Stack loss (D) Heat transfer rate in the furnace

Description : Oxygen enrichment of combustion air does not result in increase of the (A) Flame temperature (B) Oxygen in the flue gas (C) Stack loss (D) Heat transfer rate in the furnace

Last Answer : (B) Oxygen in the flue gas

In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the (A) Rate of firing and emissivity of flame (B) Thermal conductivity of the charge & structural materials of furnace (C) Nature of process; whether batch, continuous or intermittent (D) All (A), (B) and (C)

Description : In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the (A) Rate of firing and emissivity of flame (B) Thermal conductivity of the charge & ... (C) Nature of process; whether batch, continuous or intermittent (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

Deficiency of combustion air during combustion of a gaseous fuel (A) Lengthens the flame (B) Causes heat loss of fuel by its partial combustion (C) Both (A) & (B) (D) Shortens the flame

Description : Deficiency of combustion air during combustion of a gaseous fuel (A) Lengthens the flame (B) Causes heat loss of fuel by its partial combustion (C) Both (A) & (B) (D) Shortens the flame

Last Answer : (C) Both (A) & (B)

Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Description : Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Last Answer : (C) Can be done with less excess ai

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Presence of nitrogen in combustion air does not reduce the (A) Amount of heat liberated (B) Flame temperature (C) Flue gas temperature (D) Any of the above

Description : Presence of nitrogen in combustion air does not reduce the (A) Amount of heat liberated (B) Flame temperature (C) Flue gas temperature (D) Any of the above

Last Answer : (A) Amount of heat liberated

Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat

Description : Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat

Last Answer : (D) Either (A) or (B) without gain or loss of heat

A fuel with high heat release rate will (A) Require smaller combustion chamber (B) Have high calorific value (C) Have high adiabatic flame temperature (D) None of these

Description : A fuel with high heat release rate will (A) Require smaller combustion chamber (B) Have high calorific value (C) Have high adiabatic flame temperature (D) None of these

Last Answer : (A) Require smaller combustion chamber

If the specific heat of gaseous products of combustion of a fuel is high, the abiabatic flame temperature will be (A) Low (B) High (C) Very high, if the fuel is of low calorific value (D) None of these

Description : If the specific heat of gaseous products of combustion of a fuel is high, the abiabatic flame temperature will be (A) Low (B) High (C) Very high, if the fuel is of low calorific value (D) None of these

Last Answer : (A) Low(A) Low

Which of the following is not increased by using preheated combustion air in place of ordinary air at room temperature? (A) Calorific value of the fuel (B) Flame temperature achieved (C) Speed of combustion of fuel (D) Heat transfer rate to the stock in the furnace

Description : Which of the following is not increased by using preheated combustion air in place of ordinary air at room temperature? (A) Calorific value of the fuel (B) Flame temperature achieved (C) Speed of combustion of fuel (D) Heat transfer rate to the stock in the furnace

Last Answer : (A) Calorific value of the fuel

The sterilisation of Gutta Percha is achieved by: a. Heat. b. Chemical sterilisation. c. Flame. d. Boiling. e. Autoclave.

Description : The sterilisation of Gutta Percha is achieved by: a. Heat. b. Chemical sterilisation. c. Flame. d. Boiling. e. Autoclave.

Last Answer : b. Chemical sterilisation.

The sterilisation of Gutta Percha is achieved by: A. Heat B. Chemical sterilisation C. Flame D. Boiling E. Autoclave

Description : The sterilisation of Gutta Percha is achieved by:  A. Heat  B. Chemical sterilisation  C. Flame  D. Boiling  E. Autoclave 

Last Answer : B. Chemical sterilisation 

How does cover a pot prevent heat loss?

Description : How does cover a pot prevent heat loss?

Last Answer : Need answer

If a burner on the stove heats the bottom of a pot what transfer of heat is ti?

Description : If a burner on the stove heats the bottom of a pot what transfer of heat is ti?

Last Answer : conduction

If a burner on the stove heats the bottom of a pot what transfer of heat is ti?

Description : If a burner on the stove heats the bottom of a pot what transfer of heat is ti?

Last Answer : conduction

How A 500 g piece of iron changes 7 C when heat is added. How much heat energy in joules is produced due to this change in temperature?

Description : How A 500 g piece of iron changes 7 C when heat is added. How much heat energy in joules is produced due to this change in temperature?

Last Answer : Need answer

The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Last Answer : latent heat

What happens when a catalyst is added to a system at equilibrium? A The reaction follows an alternative pathway of lower activation energy. B The heat of reaction decreases. C The potential energy of the reactants decreases. D The potential energy of the products decreases. E The rate of chemical reaction decreases.

Description : What happens when a catalyst is added to a system at equilibrium? A The reaction follows an alternative pathway of lower activation energy. B The heat of reaction decreases. C The potential ... decreases. D The potential energy of the products decreases. E The rate of chemical reaction decreases.

Last Answer : A The reaction follows an alternative pathway of lower activation energy.

On placing an inverted tumbler over a burning candle, the flame extinguishes after some – time . This is because of non –availability of a) oxygen b)water vapour c)carbon dioxide d)wax

Description : On placing an inverted tumbler over a burning candle, the flame extinguishes after some – time . This is because of non –availability of a) oxygen b)water vapour c)carbon dioxide d)wax

Last Answer : a) oxygen

When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy state, they emit light, which we can observe in - (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Description : When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy state, they emit light, which we can observe in - (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Last Answer : (3) Emission spectra Explanation: When a metal atom is strongly heated, its electrons absorb the heat energy and jump to a higher energy level. When the electron returns to its original position it ... to the energy the electron has released at each stage °fits fall back to its original state.

When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy siate, they emit light, which we can observe in (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Description : When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy siate, they emit light, which we can observe in (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Last Answer : Emission spectra

Is it healthy to cook meats over an open flame fire?

Description : Is it healthy to cook meats over an open flame fire?

Last Answer : It is healthy and safe to cook meats over an open flame fire but you need to make sure that the meat is cooked thorougly as so no one gets sick .

Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Description : When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Last Answer : (1) heat is liberated Explanation: When quick lime is added to water, then a chemical reaction takes places and slaked lime is formed, evolving heat in this process. It makes the water boil.

Which of the following is a correct observation when water is added to substance ̳X‘ (a) vigorous bubbling and a hissing sound (b) slow bubbling with no sound (c) vigorous bubbling with evolution of heat and a hissing sound (d) only hissing sound

Description : Which of the following is a correct observation when water is added to substance ̳X‘ (a) vigorous bubbling and a hissing sound (b) slow bubbling with no sound (c) vigorous bubbling with evolution of heat and a hissing sound (d) only hissing sound

Last Answer : (c) vigorous bubbling with evolution of heat and a hissing sound

Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Description : Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Last Answer : Answer: Option D

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

Ten calories of heat are added to 2 grams of water. The temperature of the water rises to a total of how many degrees? Is it: w) 2 degrees Celsius x) 5 degrees Celsius y) 10 degrees Celsius z) 20 degrees Celsius

Description : Ten calories of heat are added to 2 grams of water. The temperature of the water rises to a total of how many degrees? Is it: w) 2 degrees Celsius x) 5 degrees Celsius y) 10 degrees Celsius z) 20 degrees Celsius

Last Answer : ANSWER: X -- 5 DEGREES CELSIUS

In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Description : In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Last Answer : Heat supplied Q = m (h2-h1) …….(Steady flow energy equation for boiler) ; h2=3200 KJ/kg h1=2000 KJ/kg m = 10 Tons /hour = (10 x 1000)/3600 kg/sec = 2.77 Kg/sec Q = 2.77(3200-2000) = 3324 KJ/sec heat supplied for 10 Tons/hr steam generation

When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Description : When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Last Answer :  heat is liberated

What type of energy dose a coffee pot use?

Description : What type of energy dose a coffee pot use?

Last Answer : Electrical to mechanical and thermal energy

Is the reason why pot isn’t viewed the same as other medicine is because it is over prescribed?

Description : Is the reason why pot isn’t viewed the same as other medicine is because it is over prescribed?

Last Answer : Vicodin is overprescribed, and I don’t think anyone is discrediting that as a medication. Perhaps that plays a part, but I think there is a much bigger picture surrounding this debate.

Pasta pot boils over...

Description : Pasta pot boils over...

Last Answer : the froth is starch.

Can a papyrus be over watered in a pot?

Description : Can a papyrus be over watered in a pot?

Last Answer : Need Answer

Can I keep Lovage outside in a pot in NC over the winter?

Description : Can I keep Lovage outside in a pot in NC over the winter?

Last Answer : Need Answer

can you keep peonies in a pot over winter

Description : can you keep peonies in a pot over winter

Last Answer : You can plant them right now in the ground. This is the time to do it....

A candle flame 2 cm high is palced at distance of 2 metere from a wall. How far from the wall must a concave mirror to placed in order to form an imag

Description : A candle flame 2 cm high is palced at distance of 2 metere from a wall. How far from the wall must a concave mirror to placed in order to form an imag

Last Answer : A candle flame 2 cm high is palced at distance of 2 metere from a wall. How far from the wall must ... an images of the flame 6 cm high on the wall ?

What happens when is heat is added to silicon?

Description : What happens when is heat is added to silicon?

Last Answer : happens when heat is added to silicon?

What happens when heat is added to silicon ?

Description : What happens when heat is added to silicon ?

Last Answer : happens when heat is added to silicon?

When heat is added to or removed from a substance it may change its state. What state will most likely result if heat is added to a liquid?

Description : When heat is added to or removed from a substance it may change its state. What state will most likely result if heat is added to a liquid?

Last Answer : A gas.

What happen when heat is added to liquid?

Description : What happen when heat is added to liquid?

Last Answer : When heated, the particles in a liquid move faster.They collide with one another and take up more space so the liquid as a whole expands.

Can a heat pump be added to an above ground pool?

Description : Can a heat pump be added to an above ground pool?

Last Answer : Although it is advisable to check your manufacturer specifications, there are heat pumps available for above ground pools. You should expect to pay about $2,000.00 (+/-) for the unit itself plus any installations costs.

How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Description : How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Last Answer : The amount of NO and SO3 would increased.