I bought a 1984 blazer it had a 350 numbers 10243880 it fired up but knocked i pulled the oil pan and one bearing spun can I just replace the spun bearing only and go or all bearings also it's supposed to be fuel injected but mine is carburated TIA?

I  bought a 1984 blazer it had a 350  numbers 10243880  it fired up but  knocked i pulled the oil pan and one bearing spun can I just replace the spun bearing only and go or all bearings also it's supposed to be fuel injected but mine is carburated  TIA?
by

1 Answer

Answer :

Oops the K5 blazer is a 91 not an 84 I found out the year of the motor was 96 to 2000 but I need information on fixing the bearings
by

Related questions

If the bearings of an electrical generator are failing more frequently than expected and the lubricating oil is sludging then you should ______________. A. check the connections to the output leads B. check the bearing insulating block on one end of the unit C. replace the bearing with a sealed roller type D. replace the thrust bearing of the prime mover

Description : If the bearings of an electrical generator are failing more frequently than expected and the lubricating oil is sludging then you should ______________. A. check the connections to the output leads B. ... replace the bearing with a sealed roller type D. replace the thrust bearing of the prime mover

Last Answer : Answer: B

Assertion (A): In steady rotating condition the journal inside a hydrodynamic journal bearing remains floating on the oil film. [IES-2008] Reason (R): The hydrodynamic pressure developed in steady rotating conditions in journal bearings balances the load on the journal. (a) Both A and R are true and R is the correct explanation of A (b) Both A and R are true but R is NOT the correct explanation of A (c) A is true but R is false (d) A is false but R is true

Description : Assertion (A): In steady rotating condition the journal inside a hydrodynamic journal bearing remains floating on the oil film. [IES-2008] Reason (R): The hydrodynamic pressure developed in steady rotating conditions in journal ... A (c) A is true but R is false (d) A is false but R is true

Last Answer : (a) Both A and R are true and R is the correct explanation of A

how much would it cost to replace a transmission on a 1995 chevy blazer 4.0L V6 4x4?

Description : how much would it cost to replace a transmission on a 1995 chevy blazer 4.0L V6 4x4?

Last Answer : There are a few variables that can determine the cost of replacing a transmission in your Blazer. If you can find a used transmission at a junk yard, or buy a "totaled" Blazer for scrap parts ... , it can cost you upwards of $1500-$2000 for a new one installed by a certified transmission specialist.

Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease

Description : Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease

Last Answer : Answer: C

Rotor shaft of a large electric motor supported between short bearings at both ends shows a deflection of 1.8 mm in middle of motor. Assuming rotor to be perfectly balanced and supported at knife edges at both ends, likely critical speed (rpm) of shaft isA 350 B 4430 C 705 D 2810

Description : Rotor shaft of a large electric motor supported between short bearings at both ends shows a deflection of 1.8 mm in middle of motor. Assuming rotor to be perfectly balanced and supported at knife edges at both ends, likely critical speed (rpm) of shaft isA 350 B 4430 C 705 D 2810

Last Answer : C 705

how to replace the oil pan gaskit on a 1998 lexus gs 300

Description : how to replace the oil pan gaskit on a 1998 lexus gs 300

Last Answer : Need Answer

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Should Plaxico Burress be fired? Not because of his illegal act but because sports is supposed to be about coordination and accuracy?

Description : Should Plaxico Burress be fired? Not because of his illegal act but because sports is supposed to be about coordination and accuracy?

Last Answer : You never made a stupid mistake or acted like a klutz? One instance shouldn’t get the guy essentially blackballed from football. If that were the case, every player who fumbled would be gone. So would every player who missed a stair.

What way do the rod bearing caps go onto the connecting rod on a Chevy 350 motor?

Description : What way do the rod bearing caps go onto the connecting rod on a Chevy 350 motor?

Last Answer : The notches for the bearings to lock from spinning are both onthe same side.

The only point in the steering stand shown in the illustration which needs periodic lubrication is the ______________. EL-0098 A. repeater assembly ball bearings B. steering wheel bearing C. operation selector switch D. course selector pointer

Description : The only point in the steering stand shown in the illustration which needs periodic lubrication is the ______________. EL-0098 A. repeater assembly ball bearings B. steering wheel bearing C. operation selector switch D. course selector pointer

Last Answer : Answer: B

Match List I with List II and select the : [IES-2002] List I (Bearings) List II (Load type) A. Hydrodynamic Journal bearing 1. High radial and thrust load combined B. Rectangular Hydrostatic bearing 2. Radial load only C. Taper Roller bearing 3. Thrust load only D. Angular contact ball bearing 4. Medium to low radial and thrust combined A B C D A B C D (a) 2 3 1 4 (b) 4 1 3 2 (c) 2 1 3 4 (d) 4 3 1 2

Description : Match List I with List II and select the : [IES-2002] List I (Bearings) List II (Load type) A. Hydrodynamic Journal bearing 1. High radial and thrust load combined B. Rectangular Hydrostatic bearing 2. Radial load only C. Taper Roller ... (a) 2 3 1 4 (b) 4 1 3 2 (c) 2 1 3 4 (d) 4 3 1 2

Last Answer : (a) 2 3 1 4

A son went to his father's house and knocked on the door. When his father answered the door, the son said, 'O.K., today is the day I promised to burn your house to the ground.' 'But I built the house in 1941 with my own two hands. It has a lot of sentimental value, and is still very useful to me,' replied the father. 'Too bad,' said the son, 'but I have always loathed it, especially in the wintertime, and I grew to especially hate it since you added that second hole to it when you built the addition to the house when I was a teenager.' 'But if you burn the house down, where will I go?' asked the father. 'You will just have to go where most people go in these modern times,' answered the son. 'Well, I guess you're right,' said his father. The son then promptly escorted his father outside, wh

Description : A son went to his father's house and knocked on the door. When his father answered the door, the son said, 'O.K., today is the day I promised to burn your house to the ground.' 'But I ... 'Well, I guess you're right,' said his father. The son then promptly escorted his father outside, wh -Riddles

Last Answer : The father, although he owned a fully functioning home, had never been able to break himself from the habit of going to the bathroom in the Outhouse he had built for his family back in 1941. The son, ... the son had been trying for some time to get his father to agree to let him burn it down.

Elected plastic cosmetic surgery, in all its forms, has just spun completely out of control. Can anything be done?

Description : Elected plastic cosmetic surgery, in all its forms, has just spun completely out of control. Can anything be done?

Last Answer : answer:If someone chooses to have cosmetic surgery and they're old enough to legally make that decision, I don't think it's my business to interfere or judge or something governments should regulate. I ... t think that's the norm. How many people do you personally know who've had cosmetic surgery?

I guess I am supposed to phrase this question like so: I was fired from my last job, should I allow a prospective employer to contact them?

Description : I guess I am supposed to phrase this question like so: I was fired from my last job, should I allow a prospective employer to contact them?

Last Answer : answer:If I was you, I would ask a friend to pose as a prospective employer and call them to see what they say. Also see this similar question for more information.

Gutless low power Jeep Cherokee Sport with fuel injected straight 6 what is up with that?

Description : Gutless low power Jeep Cherokee Sport with fuel injected straight 6 what is up with that?

Last Answer : You need to take it to a garage with diagnostic equipment. It may the the black box for the fuel system, it may be the O2 sensor, it may be the timing….... You can throw many dollars at it without fixing it. Find what is wrong/broken and replace it. Get it to a garage.

If iPhone is supposed to have the best Internet why is mine sending me to mobile versions of websites?

Description : If iPhone is supposed to have the best Internet why is mine sending me to mobile versions of websites?

Last Answer : The Internet sites are able to detect that you are using a mobile device and automatically redirect you to the mobile site. If you look around the screen, there is often a button allowing you to return to the normal site.

Babbitt metal used for making bearings should have (A) High co-efficient of friction between journal and bearing (B) Ability to retain lubricant on its surface (C) Low co-efficient of friction between journal and bearing (D) Both (B) & (C)

Description : Babbitt metal used for making bearings should have (A) High co-efficient of friction between journal and bearing (B) Ability to retain lubricant on its surface (C) Low co-efficient of friction between journal and bearing (D) Both (B) & (C)

Last Answer : (A) High co-efficient of friction between journal and bearing

In diesel engine the fuel injected would burn instantaneously at about compressed air temperature of A. 1000°C B. 250°C C. 450°C D. 2000°C

Description : In diesel engine the fuel injected would burn instantaneously at about compressed air temperature of A. 1000°C B. 250°C C. 450°C D. 2000°C

Last Answer : ANSWER : A

Fuel is injected into the cylinder at the end of ______________ stroke. a) suction b) compression c) expansion d) exhaust

Description : Fuel is injected into the cylinder at the end of ______________ stroke. a) suction b) compression c) expansion d) exhaust

Last Answer : Answer: b Explanation: Fuel is injected into the cylinder at the end of compression stroke and not at suction or expansion stroke.

The fuel in diesel engine is normally injected at pressure of a. 5-10 kg/cm2 b. 20-25 kg/cm2 c 60-80 kg/cm2 d. 90-130 kg/cm2

Description : The fuel in diesel engine is normally injected at pressure of a. 5-10 kg/cm2 b. 20-25 kg/cm2 c 60-80 kg/cm2 d. 90-130 kg/cm2

Last Answer : ANSWER d. 90-130 kg/cm2

In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Description : In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Last Answer : ANSWER c. heat resulting from compressing air that is supplied for combustion

A man wanted to enter an exclusive club but did not know the password that was required. He waited by the door and listened. A club member knocked on the door and the doorman said, 'twelve.' The member replied, 'six ' and was let in. A second member came to the door and the doorman said, 'six.' The member replied, 'three' and was let in. The man thought he had heard enough and walked up to the door. The doorman said ,'ten' and the man replied, 'five.' But he was not let in. What should have he said? -Riddles

Description : A man wanted to enter an exclusive club but did not know the password that was required. He waited by the door and listened. A club member knocked on the door and the doorman said, 'twelve.' The member ... and the man replied, 'five.' But he was not let in. What should have he said? -Riddles

Last Answer : Three. The doorman lets in those who answer with the number of letters in the word the doorman says.

A man wanted to enter an exclusive club but did not know the password that was required. He waited by the door and listened. A club member knocked on the door and the doorman said, "twelve." The member replied, "six" and was let in. A second member came to the door and the doorman said, "six." The member replied, "three" and was let in. The man thought he had heard enough and walked up to the door. The doorman said, "ten" and the man replied, "five". But he was not let in. What should have he said?

Description : A man wanted to enter an exclusive club but did not know the password that was required. He waited by the door and listened. A club member knocked on the door and the doorman said, "twelve." The member replied, ... "ten" and the man replied, "five". But he was not let in. What should have he said?

Last Answer : The man had to reply the number of characters in the word the Doorman was asking. He should have replied "Three" instead of "Five".

A man wanted to enter an exclusive club but did not know the password that was required. He waited by the door and listened. A club member knocked on the door and the doorman said, "twelve." The member replied, "six" and was let in. A second member came to the door and the doorman said, "six." The member replied, "three" and was let in. The man thought he had heard enough and walked up to the door. The doorman said, "ten" and the man replied, "five". But he was not let in. What should have he said?

Description : A man wanted to enter an exclusive club but did not know the password that was required. He waited by the door and listened. A club member knocked on the door and the doorman said, "twelve." The member replied, ... "ten" and the man replied, "five". But he was not let in. What should have he said?

Last Answer : The man had to reply the number of characters in the word the Doorman was asking. He should have replied "Three" instead of "Five".

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Description : If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Last Answer : Answer: A

The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Description : The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Last Answer : Answer: D

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

In the illustrated motor, roller bearings are used because __________. EL-0001 A. of their ability to absorb moderate thrust loads B. they electrically insulate the rotor from the frame reducing cross-currents C. the shafting and end bells do not require as close a tolerance to properly fit this type of bearing D. the clearance between the rotor and stator is generally as close as mechanical tolerance will permit

Description : In the illustrated motor, roller bearings are used because __________. EL-0001 A. of their ability to absorb moderate thrust loads B. they electrically insulate the rotor from the frame reducing ... clearance between the rotor and stator is generally as close as mechanical tolerance will permit

Last Answer : Answer: D

In a curved prestressed bridge, how should the guided bearings in piers of the curved region be oriented with respect to the fixed bearing in abutment?

Description : In a curved prestressed bridge, how should the guided bearings in piers of the curved region be oriented with respect to the fixed bearing in abutment?

Last Answer : To determine the orientation of guided bearings, one should understand the movement of curved region of a prestressed bridge. Movement of prestress and creep are tangential to the curvature of the ... large, temporary freedom of movement at the guided bearings has to be provided during construction.

The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Description : The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Last Answer : (b) 37.29 kN

Calculate the bearing life if expected life for 90% bearings is 9000 hr and the shaft is rotating at 1500 rpm. (a) 850 million rev (b) 810 million rev (c) 810 hr (d) 850 hr

Description : Calculate the bearing life if expected life for 90% bearings is 9000 hr and the shaft is rotating at 1500 rpm. (a) 850 million rev (b) 810 million rev (c) 810 hr (d) 850 hr

Last Answer : (b) 810 million rev

The dynamic load-carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. (a) True (b) False

Description : The dynamic load-carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. (a) True (b) False

Last Answer : (b) False

Which of the following cannot tolerate misalignment? (a) Angular contact bearing (b) Cylinder roller bearing (c) Thrust ball bearings (d) All of the listed

Description : Which of the following cannot tolerate misalignment? (a) Angular contact bearing (b) Cylinder roller bearing (c) Thrust ball bearings (d) All of the listed

Last Answer : (d) All of the listed

Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Description : Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Last Answer : (c) Cylindrical (straight) roller bearing

Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List –I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine engines D. Ball bearing 4. Swivelling chairs A B C D A B C D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Description : Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List -I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine ... D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Last Answer : (c) 3 4 2 1

Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ............................Combined radial and axial loads Which of these pairs is/are correctly matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Description : Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ... matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Last Answer : (b) 1 and 2

The dynamic load carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. a) True b) False

Description : The dynamic load carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. a) True b) False

Last Answer : b) False

Which of the following cannot tolerate misalignment? a) Angular contact bearing b) Cylinder roller bearing c) Thrust ball bearings d) All of the listed

Description : Which of the following cannot tolerate misalignment? a) Angular contact bearing b) Cylinder roller bearing c) Thrust ball bearings d) All of the listed

Last Answer : d) All of the listed

The bearings which resist radial loads is known as a) Ball bearing b) bush bearing c) thrust bearing d) journal bearing

Description : The bearings which resist radial loads is known as a) Ball bearing b) bush bearing c) thrust bearing d) journal bearing

Last Answer : d) journal bearing

There are two stations A and B. Which of the following statements is correct? (A) The fore bearing of AB is AB (B) The back bearing of AB is BA (C) The fore and back bearings of AB differ by 180° (D) All the above

Description : There are two stations A and B. Which of the following statements is correct? (A) The fore bearing of AB is AB (B) The back bearing of AB is BA (C) The fore and back bearings of AB differ by 180° (D) All the above

Last Answer : (D) All the above

Babbitt lining is used on brass/bronze bearings to increase the (A) Antifriction properties (B) Compressive strength (C) Bearing resistance

Description : Babbitt lining is used on brass/bronze bearings to increase the (A) Antifriction properties (B) Compressive strength (C) Bearing resistance

Last Answer : Option D

Bearings for plate girders are -- a) roller bearing b) sliding bearings c) centralised articulated bearings* d) None of the above

Description : Bearings for plate girders are -- a) roller bearing b) sliding bearings c) centralised articulated bearings* d) None of the above

Last Answer : c) centralised articulated bearings*

Can one single person tell me the name of these crackers? TIA?

Description : Can one single person tell me the name of these crackers? TIA?

Last Answer : Jeez, I thought you were talking about lower-class white trailer trash. I'd ... =pla&utm_medium=pla&utm_source=google&utm_campaign=Shopping_CL0_Decile&utm_content=039631000462&utm_term=na&gclid=Cj0KCQjw6rXeBRD3ARIsAD9ni9DfZvEuab6iNwz6kMeg8J0yI2TVL9QGI4HTPLfbDWI7xB1tTtZQBi8aAs17EALw_wcB

What do you think really happened on the night that Tia Tequila claims she was choked by San Diego Charger Shawne Merriman?

Description : What do you think really happened on the night that Tia Tequila claims she was choked by San Diego Charger Shawne Merriman?

Last Answer : I think she just wants the money and attention, I mean seriously, have you seen “a shot of love”? EURGH.

Does Tia Maria have any siblings?

Description : Does Tia Maria have any siblings?

Last Answer : There is no information about her parents as well as siblings, details and background. Tia was raised and taken care of by her stepmother. Likewise, she has not disclosed her educational and academic ... it is known that Tia was very much fond of four-legged creatures from her childhood days.

Tia out of the forest What will happen ?

Description : Tia out of the forest What will happen ?

Last Answer : The answer will be pineapple.

None Tia Call No ?

Last Answer : Cot .

Can a right branch bundle block cause a Tia?

Description : Can a right branch bundle block cause a Tia?

Last Answer : Feel Free to Answer

In any spreadsheet, the address of the first cell is - (1) OA (2) TIA (3) AO (4) Al

Description : In any spreadsheet, the address of the first cell is - (1) OA (2) TIA (3) AO (4) Al

Last Answer : (4) Al Explanation: There are rows and columns in any spreadsheet. Each column has a capital letter on the top to show what column it is. Each row has a number to the immediate left of the first column, to show what row it is. So address of the cell in the first column, first row is Al.