A vertical section through different layers of the soil is called the _________. -Science

A vertical section through different layers of the soil is called the _________. -Science
by

1 Answer

Answer :

A vertical section through different layers of soil is called the soil profile.
by

Related questions

Which one the following is a correct statement? (A) The vertical section of the soil extending into the parent material, is called profile(B) The layers of the soil parallel to the earth surface are called horizons (C) The transitional layer between two adjoining horizons is called boundary (D) All of these

Description : Which one the following is a correct statement? (A) The vertical section of the soil extending into the parent material, is called profile (B) The layers of the soil parallel to the earth ... horizons (C) The transitional layer between two adjoining horizons is called boundary (D) All of these

Last Answer : Answer: Option D

The vertical section of soil showing the various layers from surface to unaffected parent material is known as — a. Horizon b. Soil profile c. Pedon d. None of these

Description : The vertical section of soil showing the various layers from surface to unaffected parent material is known as — a. Horizon b. Soil profile c. Pedon d. None of these

Last Answer : b. Soil profile

A vertical section of soil through all its horizons

Description : A vertical section of soil through all its horizons

Last Answer : Ans. Soil Profile

“The tracing of requirements for a test level through the layers of a test documentation” done by A. Horizontal tracebility B. Depth tracebility C. Vertical tracebility D. Horizontal & Vertical tracebilities

Description : “The tracing of requirements for a test level through the layers of a test documentation” done by A. Horizontal tracebility B. Depth tracebility C. Vertical tracebility D. Horizontal & Vertical tracebilities

Last Answer : A. Horizontal tracebility

The earth’s atmosphere is divided into layers based on the vertical profile of -----? A. Air pressure B. Air temperature (Answer) C. Air density D. Wind speed

Description : The earth’s atmosphere is divided into layers based on the vertical profile of -----? A. Air pressure B. Air temperature (Answer) C. Air density D. Wind speed

Last Answer : B. Air temperature (Answer)

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Presence of plants arranged into well defined vertical layers depending on their height can be seen best in (a) tropical rainforest (b) grassland (c) temperate forest (d) tropical savannah.

Description : Presence of plants arranged into well defined vertical layers depending on their height can be seen best in (a) tropical rainforest (b) grassland (c) temperate forest (d) tropical savannah.

Last Answer : (a) tropical rainforest

Presence of plants arranged into well defined vertical layers depending on their height can be seen best in: (1) Tropical Rain Forest (2) Grassland (3) Temperate Forest (4) Tropical Savannah

Description : Presence of plants arranged into well defined vertical layers depending on their height can be seen best in: (1) Tropical Rain Forest (2) Grassland (3) Temperate Forest (4) Tropical Savannah

Last Answer : (1) Tropical Rain Forest

The network that involves backward links from output to the input and hidden layers is called _________ a) Self organizing maps b) Perceptrons c) Recurrent neural network d) Multi layered perceptron

Description : The network that involves backward links from output to the input and hidden layers is called _________ a) Self organizing maps b) Perceptrons c) Recurrent neural network d) Multi layered perceptron

Last Answer : c) Recurrent neural network

The soil is divided into different layers called Horizons. Which horizon is called “regolith”? a. Horizon D b. Horizon E c. Horizon B d. Horizon A e. Horizon C

Description : The soil is divided into different layers called Horizons. Which horizon is called “regolith”? a. Horizon D b. Horizon E c. Horizon B d. Horizon A e. Horizon C

Last Answer : e. Horizon C

In which of the following cases, it is possible for flow to occur from low pressure to high pressure? (A) Flow of liquid upward in a vertical pipe (B) Flow through a converging section (C) Flow of air downward in a pipe (D) Impossible in a constant cross-section conduit

Description : In which of the following cases, it is possible for flow to occur from low pressure to high pressure? (A) Flow of liquid upward in a vertical pipe (B) Flow through a converging section (C) Flow of air downward in a pipe (D) Impossible in a constant cross-section conduit

Last Answer : (B) Flow through a converging section

_________ is an artificial neural network with multiple hidden layers between the input and output layers? (A) Deep neural network (B) Shallow neural network (C) Both(A) & (B) (D) None of the Above

Description : _________ is an artificial neural network with multiple hidden layers between the input and output layers? (A) Deep neural network (B) Shallow neural network (C) Both(A) & (B) (D) None of the Above

Last Answer : (A) Deep neural network

A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway

Description : A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway

Last Answer : B. bridge

Several protocols for upper layers in bluetooth use _________ a) UDP b) HSP c) ITC d) L2CAP

Description : Several protocols for upper layers in bluetooth use _________ a) UDP b) HSP c) ITC d) L2CAP

Last Answer : d) L2CAP

Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough

Description : Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough

Last Answer : Chisel plough

plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above

Description : plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above

Last Answer : Chisel plough

Soil consists of different layers which are often known as ______ a. Slab b. Profile c. Horizon d. Sphere

Description : Soil consists of different layers which are often known as ______ a. Slab b. Profile c. Horizon d. Sphere

Last Answer : b. Profile

Soil consists of different layers which are often known as ______ a. Slab b. Profile c. Horizon d. Sphere

Description : Soil consists of different layers which are often known as ______ a. Slab b. Profile c. Horizon d. Sphere

Last Answer : b. Profile

When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface

Description : When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface

Last Answer : (B) Velocity gradient is zero at the solid surface

Vertical movement of water or downward movement of water from different soil layer is called as

Description : Vertical movement of water or downward movement of water from different soil layer is called as

Last Answer : Ans.Percolation

Improved uniformity is obtained if seed tube is inclined rear ward at _________ with vertical. a)5-15° b)15-30° c)30-40° d)40-50

Description : Improved uniformity is obtained if seed tube is inclined rear ward at _________ with vertical. a)5-15° b)15-30° c)30-40° d)40-50

Last Answer : b)15-30°

The type of diversification in which the company adds complementary to the existing product or service line is _________. A. conglomerate diversification. B. horizontal integration. C. vertical integration. D. concentric integration.

Description : The type of diversification in which the company adds complementary to the existing product or service line is _________. A. conglomerate diversification. B. horizontal integration. C. vertical integration. D. concentric integration.

Last Answer : C. vertical integration.

Q2. What are the differences between broilers and layers and in their management? -Science

Description : Q2. What are the differences between broilers and layers and in their management? -Science

Last Answer : The poultry bird raised for meat purpose is called broiler. Broilers feed on protein rich adequate fat food. The level of vitamins A and K is kept high in the poultry feeds. Layers ... requirements of broilers vary from those of egg layers. Layers require proper lightning and enough space.

What is a vertical section called in a table word document?

Description : What is a vertical section called in a table word document?

Last Answer : What is the answer ?

What is water called that fills in cracks and spaces underground soil and rock layers called?

Description : What is water called that fills in cracks and spaces underground soil and rock layers called?

Last Answer : What is the answer ?

The layers of vegetable wastes and night soil alternatively piled above the ground to form a mound, is called A. A heap B. Plateau C. Windrow D. None of these

Description : The layers of vegetable wastes and night soil alternatively piled above the ground to form a mound, is called A. A heap B. Plateau C. Windrow D. None of these

Last Answer : ANS: D

The slenderness ratio of a vertical column of square cross- section of 10 cm side and 500 cm long, is (A) 117.2 (B) 17.3 (C) 173.2 (D) 137.2

Description : The slenderness ratio of a vertical column of square cross- section of 10 cm side and 500 cm long, is (A) 117.2 (B) 17.3 (C) 173.2 (D) 137.2

Last Answer : (C) 173.2

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (A) 200 (B) 240 (C) 360 (D) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm  length, is  (A) 200  (B) 240  (C) 360  (D) 416

Last Answer : (D) 416

The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Description : The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Last Answer : (A) Parabolic

Vertical section of plough influences 1. Pulverization 2. Depth of cut 3. Width of cut 4. direction of pull

Description : Vertical section of plough influences 1. Pulverization 2. Depth of cut 3. Width of cut 4. direction of pull

Last Answer : ans 2

Vertical section of plough influence A. Pulverisation B. Depth of cut C. Width of cut. D. Direction of pull

Description : Vertical section of plough influence A. Pulverisation B. Depth of cut C. Width of cut. D. Direction of pull

Last Answer : Pulverisation 

Vertical section of plough influences A. Pulverization C. Width of cut B. Depth of cut D. Direction of pull

Description : Vertical section of plough influences A. Pulverization C. Width of cut B. Depth of cut D. Direction of pull

Last Answer : Depth of cut

Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Description : Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Last Answer : (c) 0.577

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400

Last Answer : (b) 416

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416

Last Answer : (d) 416

Compression members always tend to buckle in the direction of (a) Vertical axis (b) Horizontal axis (c) Minimum cross-section (d) Least radius of gyration

Description : Compression members always tend to buckle in the direction of (a) Vertical axis (b) Horizontal axis (c) Minimum cross-section (d) Least radius of gyration

Last Answer : (d) Least radius of gyration

Which one of the following statements is NOT correct? [IAS 2003] (a) Black cotton soil of north-west India was formed by the weathering of basaltic lava rocks (b) Sedimentary rocks are distinguished from other types of rocks by the presence of distinct layers (c) Granite has large crystals of quartz, feldspar and mica in it (d) A metamorphic rock is softer and less compact than its original type

Description : Which one of the following statements is NOT correct? [IAS 2003] (a) Black cotton soil of north-west India was formed by the weathering of basaltic lava rocks (b) Sedimentary rocks are distinguished ... feldspar and mica in it (d) A metamorphic rock is softer and less compact than its original type

Last Answer : Ans: (d)

Which one of the following processes during decomposition is correctly described? (a) Catabolism – Last step in the decomposition under fully anaerobic condition (b) Leaching – Water soluble inorganic nutrients rise to the top layers of soil (c) Fragmentation – Carried out by organisms such as earthworm (d) Humification – Leads to the accumulation of a dark coloured substance humus which undergoes microbial action at a very fast rate.

Description : Which one of the following processes during decomposition is correctly described? (a) Catabolism - Last step in the decomposition under fully anaerobic condition (b) Leaching - Water soluble inorganic ... of a dark coloured substance humus which undergoes microbial action at a very fast rate.

Last Answer : (c) Fragmentation – Carried out by organisms such as earthworm

Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Description : Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) In order to check up the average depth of excavation, 'Dead man s' are left at the midwidths of borrow pits (B) The earthwork calculation in excavation is made from the difference in levels obtained with a level (C) The earth work in excavation to form the road embankment includes the formation of correct profile and depositing the soil in layers (D) All the above

Description : Pick up the correct statement from the following: (A) In order to check up the average depth of excavation, 'Dead man s' are left at the midwidths of borrow pits (B) The earthwork ... embankment includes the formation of correct profile and depositing the soil in layers (D) All the above

Last Answer : (D) All the above

This type of plough penetrate deeper than the conventional cultivation machinery and break up the layers of the soil. a. Chisel plough b. Disc plough d. None of the above

Description : This type of plough penetrate deeper than the conventional cultivation machinery and break up the layers of the soil. a. Chisel plough b. Disc plough d. None of the above

Last Answer : Ans - c. sub-soiler plough

What form of runoff is water that flows down a slope within the upper layers of the soil rather than on top of them? w) interflow x) extraflow y) endoflow z) detrital runoff

Description : What form of runoff is water that flows down a slope within the upper layers of the soil rather than on top of them? w) interflow x) extraflow y) endoflow z) detrital runoff

Last Answer : ANSWER: W -- INTERFLOW

CERSAI was registered as a government-licensed company, under section 25 of _________ A. Securitisation and Reconstruction of Financial Assets and Enforcement of Security Interest Act, 2002. B. Companies Act, 1956 C. Banking Regulation Act, 1949 D. Both (A) and (B) E. None of these

Description : CERSAI was registered as a government-licensed company, under section 25 of _________ A. Securitisation and Reconstruction of Financial Assets and Enforcement of Security Interest Act, 2002. B. Companies Act, 1956 C. Banking Regulation Act, 1949 D. Both (A) and (B) E. None of these

Last Answer : B. Companies Act, 1956 Explanation: Central Registry of Securitisation Asset Reconstruction and Security Interest of India is a company licensed under section 25 of the Companies Act, 1956

In terms of _________, HFCs cannot conduct business of housing finance without obtaining a Certificate of Registration (CoR) from NHB A. Section 29A of National Housing Bank 1987 B. Section 28A of National Housing Bank 1987 C. Section 27A of National Housing Bank 1987 D. Section 26A of National Housing Bank 1987 E. None of the Above

Description : In terms of _________, HFCs cannot conduct business of housing finance without obtaining a Certificate of Registration (CoR) from NHB A. Section 29A of National Housing Bank 1987 B. Section 28A of National ... Housing Bank 1987 D. Section 26A of National Housing Bank 1987 E. None of the Above

Last Answer : A. Section 29A of National Housing Bank 1987 Explanation: In terms of section 29A of the National Housing Bank, 1987, HFCs cannot conduct business of housing finance without obtaining a Certificate of ... can also file application for winding up of such HFCs, under section 33B of the said Act.

Notification made by the government of India are published in _____ and those by the _________ and _______and administrative offices in _________ of Gazette India a) Part I section 2, DG, Head of the circle, Part III section I b) DG order, Head of the circle, DG, Part II c) Notification, DG, Head of the circle, Part II, d) None of these

Description : Notification made by the government of India are published in _____ and those by the _________ and _______and administrative offices in _________ of Gazette India a) Part I section 2, DG, Head of the circle, Part ... DG, Part II c) Notification, DG, Head of the circle, Part II, d) None of these

Last Answer : a) Part I section 2, DG, Head of the circle, Part III section I

Maximum shear stress in a triangular section ABC of height H and base B occurs at _________ a. H b. H/2 c. H/3 d. neutral axis

Description : Maximum shear stress in a triangular section ABC of height H and base B occurs at _________ a. H b. H/2 c. H/3 d. neutral axis

Last Answer : b. H/2

A key aspect of the financial section of the business plan is _________. A. A statement of management skills. B. A realistic sales forecast. C. Production capacity. D. A description of competitors.

Description : A key aspect of the financial section of the business plan is _________. A. A statement of management skills. B. A realistic sales forecast. C. Production capacity. D. A description of competitors.

Last Answer : B. A realistic sales forecast.

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

Rainfall are measured by an instrument named _________? -Science

Description : Rainfall are measured by an instrument named _________? -Science

Last Answer : Rainfall are measured by an instrument called rain gauge.

The force which opposes the relative motion between different layers of liquid or gases is called – (1) Critical Velocity (2) Streamline Flow (3) Terminal Velocity (4) Viscous Force

Description : The force which opposes the relative motion between different layers of liquid or gases is called – (1) Critical Velocity (2) Streamline Flow (3) Terminal Velocity (4) Viscous Force

Last Answer : (4) Viscous Force Explanation: Critical Velocity – The maximum velocity upto which fluid motion is streamline is called Critical Velocity. Streamline Flow – If velocity of all fluid particles is same all the time then it can be said in streamline flow.