Which of following consume minimum power (A) TTL. (B) CMOS. (C) DTL. (D) RTL.

Which of following consume minimum power
(A) TTL. (B) CMOS.
(C) DTL. (D) RTL.
by

1 Answer

Answer :

Ans: B
CMOS consumes minimum power as in CMOS one p-MOS & one n-MOS transistors
are connected in complimentary mode, such that one device is ON & one is OFF.
by

Related questions

The digital logic family which has minimum power dissipation is (A) TTL (B) RTL (C) DTL (D) CMOS

Description : The digital logic family which has minimum power dissipation is (A) TTL (B) RTL (C) DTL (D) CMOS

Last Answer : (D) CMOS The digital logic family which has minimum power dissipation is CMOS. (CMOS being an unipolar logic family, occupy a very small fraction of silicon Chip area)

CMOS circuits consume power (A) Equal to TTL (B) Less than TTL (C) Twice of TTL (D) Thrice of TTL

Description : CMOS circuits consume power (A) Equal to TTL (B) Less than TTL (C) Twice of TTL (D) Thrice of TTL

Last Answer : Ans: B As in CMOS one device is ON & one is Always OFF so power consumption is low.

What are RTL, DTL, and TTL examples of?

Description : What are RTL, DTL, and TTL examples of?

Last Answer : Logic families.

Which of the following is the fastest logic? (A) ECL (B) TTL (C) CMOS (D) LSI

Description : Which of the following is the fastest logic? (A) ECL (B) TTL (C) CMOS (D) LSI

Last Answer : (A) ECL

The MSI chip 7474 is (A) Dual edge triggered JK flip-flop (TTL). (B) Dual edge triggered D flip-flop (CMOS). (C) Dual edge triggered D flip-flop (TTL). (D) Dual edge triggered JK flip-flop (CMOS).

Description : The MSI chip 7474 is (A) Dual edge triggered JK flip-flop (TTL). (B) Dual edge triggered D flip-flop (CMOS). (C) Dual edge triggered D flip-flop (TTL). (D) Dual edge triggered JK flip-flop (CMOS).

Last Answer : Ans: C MSI chip 7474 dual edge triggered D Flip-Flop.

The digital logic family which has the lowest propagation delay time is (A) ECL (B) TTL (C) CMOS (D) PMOS

Description : The digital logic family which has the lowest propagation delay time is (A) ECL (B) TTL (C) CMOS (D) PMOS

Last Answer : Ans: A The digital logic family which has the lowest propagation delay time is ECL (Lowest propagation delay time is possible in ECL because the transistors are used in difference amplifier configuration, in which they are never driven into saturation and thereby the storage time is eliminated).

Which of the following is the fastest logic (A) TTL (B) ECL (C) CMOS (D) LSI

Description : Which of the following is the fastest logic (A) TTL (B) ECL (C) CMOS (D) LSI

Last Answer : Ans: B ECL is the fastest logic family of all logic families. (High speeds are possible in ECL because the transistors are used in difference amplifier configuration, in which they are never driven into saturation and thereby the storage time is eliminated.

CMOS circuits are extensively used for ON-chip computers mainly because of their extremely (A) low power dissipation. (B) high noise immunity. (C) large packing density. (D) low cost.

Description : CMOS circuits are extensively used for ON-chip computers mainly because of their extremely (A) low power dissipation. (B) high noise immunity. (C) large packing density. (D) low cost.

Last Answer : Ans: C Because CMOS circuits have large packing density.

The commercially available 8-input multiplexer integrated circuit in the TTL family is (A) 7495. (B) 74153. (C) 74154. (D) 74151.

Description : The commercially available 8-input multiplexer integrated circuit in the TTL family is (A) 7495. (B) 74153. (C) 74154. (D) 74151.

Last Answer : Ans: B MUX integrated circuit in TTL is 74153.

Which TTL logic gate is used for wired ANDing (A) Open collector output (B) Totem Pole (C) Tri state output (D) ECL gates

Description : Which TTL logic gate is used for wired ANDing (A) Open collector output (B) Totem Pole (C) Tri state output (D) ECL gates

Last Answer : Ans: A Open collector output.

The logic 0 level of a CMOS logic device is approximately (A) 1.2 volts (B) 0.4 volts (C) 5 volts (D) 0 volts

Description : The logic 0 level of a CMOS logic device is approximately (A) 1.2 volts (B) 0.4 volts (C) 5 volts (D) 0 volts

Last Answer : Ans: D CMOS logic low level is 0 volts approx.

In digital ICs, Schottky transistors are preferred over normal transistors because of their (A) Lower Propagation delay. (B) Higher Propagation delay. (C) Lower Power dissipation. (D) Higher Power dissipation.

Description : In digital ICs, Schottky transistors are preferred over normal transistors because of their (A) Lower Propagation delay. (B) Higher Propagation delay. (C) Lower Power dissipation. (D) Higher Power dissipation.

Last Answer : Ans: A Lower propagation delay as shottky transistors reduce the storage time delay by preventing the transistor from going deep into saturation.

How much does an advertisement at TV2 and RTL Klub cost?

Description : Does anyone know how much a say a 10-second ad can cost?

Last Answer : It depends on how many times it will be broadcast on TV, etc. An advertisement is about 40,000-50,000 HUF, and that's what it costs to pay for it, not only once a week, but about 4 times a day.

Build using minimum number of CMOS gates.

Description : Build using minimum number of CMOS gates. Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

Last Answer : Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

What is Est Outpt L4 Dtl F?

Description : What is Est Outpt L4 Dtl F?

Last Answer : Need answer

What does est outpt L4 Dtl H&E Mod Complx Code #99214?

Description : What does est outpt L4 Dtl H&E Mod Complx Code #99214?

Last Answer : I am not sure what is being asked here

Define Asynchronous sequential circuit?

Description : Define Asynchronous sequential circuit?

Last Answer : In asynchronous sequential circuits change in input signals can affect memory element at any instant of time.

Define synchronous sequential circuit

Description : Define synchronous sequential circuit

Last Answer : In synchronous sequential circuits, signals can affect the memory elements only at discrete instant of time.

What are the different types of shift type?

Description : What are the different types of shift type?

Last Answer : There are five types. They are, Serial In Serial Out Shift Register Serial In Parallel Out Shift Register Parallel In Serial Out Shift Register Parallel In Parallel Out Shift Register Bidirectional Shift Register

Define shift registers.

Description : Define shift registers.

Last Answer : The binary information in a register can be moved from stage to stage within the register or into or out of the register upon application of clock ... arithmetic and logic operations used in microprocessors. This gives rise to group of registers called shift registers.

Define registers.

Description : Define registers.

Last Answer : A register is a group of flip-flops flip-flop can store one bit information. So an n-bit register has a group of n flip-flops and is capable of storing any binary information/number containing n-bits.

What is a master-slave flip-flop?

Description : What is a master-slave flip-flop?

Last Answer : A master-slave flip-flop consists of two flip-flops where one circuit serves as a master and the other as a slave.

What is edge-triggered flip-flop?

Description : What is edge-triggered flip-flop?

Last Answer : The problem of race around condition can solved by edge triggering flip flop. The term edge triggering means that the flip-flop changes state either at the positive ... negative edge of the clock pulse and it is sensitive to its inputs only at this transition of the clock.

Define race around condition.

Description : Define race around condition.

Last Answer : In JK flip-flop output is fed back to the input. Therefore change in the output results change in the input. Due to this in the positive half of the clock pulse if both J and K are high then output toggles continuously. This condition iscalled ‘race around condition’.

What is the operation of T flip-flop?

Description : What is the operation of T flip-flop?

Last Answer : T flip-flop is also known as Toggle flip-flop. • When T=0 there is no change in the output. • When T=1 the output switch to the complement state (ie) the output toggles.

What is the operation of JK flip-flop?

Description : What is the operation of JK flip-flop?

Last Answer : When K input is low and J input is high the Q output of flip-flop is set. When K input is high and J input is low the Q output of flip-flop is reset. When both the inputs ... are high it is possible to set or reset the flip-flop (ie) the output toggle on the next positive clock edge.

What is the operation of D flip-flop?

Description : What is the operation of D flip-flop?

Last Answer : In D flip-flop during the occurrence of clock pulse if D=1, the output Q is set and if D=0, the output is reset.

What are the different types of flip-flop?

Description : What are the different types of flip-flop?

Last Answer : There are various types of flip flops. Some of them are mentioned below they are, RS flip-flop SR flip-flop D flip-flop JK flip-flop T flip-flop

Define Flip flop.

Description : Define Flip flop.

Last Answer : The basic unit for storage is flip flop. A flip-flop maintains its output state either at 1 or 0 until directed by an input signal to change its state.

What are the classification of sequential circuits?

Description : What are the classification of sequential circuits?

Last Answer : The sequential circuits are classified on the basis of timing of their signals into two types. They are, 1)Synchronous sequential circuit. 2)Asynchronous sequential circuit.

What do you mean by comparator

Description : What do you mean by comparator

Last Answer : A comparator is a special combinational circuit designed primarily to compare the relative magnitude of two binary numbers.

Define multiplexer

Description : Define multiplexer

Last Answer : Multiplexer is a digital switch. If allows digital information from several sources to be routed onto a single output line.

What is priority Encoder?

Description : What is priority Encoder?

Last Answer : A priority encoder is an encoder circuit that includes the priority function. In priority encoder, if 2 or more inputs are equal to 1 at the same time, the input having the highest priority will take precedence.

Define Encoder?

Description : Define Encoder?

Last Answer : An encoder has 2n input lines and n output lines. In encoder the output lines generate the binary code corresponding to the input value.

What is binary decoder?

Description : What is binary decoder?

Last Answer : A decoder is a combinational circuit that converts binary information from n input lines to a maximum of 2n out puts lines.

Define Decoder

Description : Define Decoder

Last Answer : A decoder is a multiple - input multiple output logic circuit that converts coded inputs into coded outputs where the input and output codes are different.

Define Half adder and full adder

Description : Define Half adder and full adder

Last Answer : The logic circuit that performs the addition of two bits is a half adder. The circuit that performs the addition of three bits is a full adder.

Define combinational logic

Description : Define combinational logic

Last Answer : When logic gates are connected together to produce a specified output for certain specified combinations of input variables, with no storage involved, the resulting circuit is called combinational logic.

Convert the decimal number 3.375 to binary. 132) A) 0101.1100 B) 0011.1010 C) 0011.0011 D) 0011.01

Description : Convert the decimal number 3.375 to binary. 132) A) 0101.1100 B) 0011.1010 C) 0011.0011 D) 0011.01

Last Answer : D) 0011.01

Convert binary 1001 to octal. 131) A) 1018 B) 98 C) 108 D) 118

Description : Convert binary 1001 to octal. 131) A) 1018 B) 98 C) 108 D) 118

Last Answer : D) 118

Convert decimal 19 to octal. 130) A) 278 B) 218 C) 238 D) 178

Description : Convert decimal 19 to octal. 130) A) 278 B) 218 C) 238 D) 178

Last Answer : C) 238

The hexadecimal equivalent of decimal 88 is ________. 129) A) 6816 B) 5816 C) 5116 D) 551

Description : The hexadecimal equivalent of decimal 88 is ________. 129) A) 6816 B) 5816 C) 5116 D) 551

Last Answer : B) 5816

Any number with an exponent of one is equal to 128) A) two. B) itself. C) zero. D) on

Description : Any number with an exponent of one is equal to 128) A) two. B) itself. C) zero. D) on

Last Answer : B) itself.

What is the decimal value of 20? 127) A) 2 B) 0 C) 1 D) 3

Description : What is the decimal value of 20? 127) A) 2 B) 0 C) 1 D) 3

Last Answer : C) 1

The binary equivalent of hexadecimal 16 is ________. 126) A) 01110000 B) 1100001 C) 0010011 D) 0001

Description : The binary equivalent of hexadecimal 16 is ________. 126) A) 01110000 B) 1100001 C) 0010011 D) 0001

Last Answer : D) 0001

Convert binary 01001110 to octal. 125) A) 1078 B) 768 C) 1068 D) 116

Description : Convert binary 01001110 to octal. 125) A) 1078 B) 768 C) 1068 D) 116

Last Answer : D) 116

The decimal equivalent of the BCD value 0111 0110 1000 is ________. 124) A) 70810 B) 17210 C) 76810 D) 6871

Description : The decimal equivalent of the BCD value 0111 0110 1000 is ________. 124) A) 70810 B) 17210 C) 76810 D) 6871

Last Answer : C) 76810

Convert octal 32 to decimal. 123) A) 3010 B) 2610 C) 1610 D) 3201

Description : Convert octal 32 to decimal. 123) A) 3010 B) 2610 C) 1610 D) 3201

Last Answer : B) 2610

The decimal equivalent of binary 01100001 is ________. 122) A) 9110 B) 9710 C) 11510 D) 10110

Description : The decimal equivalent of binary 01100001 is ________. 122) A) 9110 B) 9710 C) 11510 D) 10110

Last Answer : B) 9710

Convert the binary number 0001.0010 to decimal. 121) A) 1.20 B) 1.40 C) 1.125 D)

Description : Convert the binary number 0001.0010 to decimal. 121) A) 1.20 B) 1.40 C) 1.125 D)

Last Answer : C) 1.125