The size of the feeder is determined primarily by the: ...

The size of the feeder is determined primarily by the: 

(A) current carrying requirement 

(B) percentage of variation of voltage in the feeder 

(C) voltage across the feeder 

(D) distance of transmission
by
by
A

2 Answers

Answer :

The size of the feeder is determined primarily by the: current carrying requirement 

by

Answer :

A
by

Related questions

The size of the feeder is determined primarily by (A) the current it is required to carry. (B) the percent variation of voltage in the feeder. (C) the voltage across the feeder. (D) the distance of transmission.

Description : The size of the feeder is determined primarily by (A) the current it is required to carry. (B) the percent variation of voltage in the feeder. (C) the voltage across the feeder. (D) the distance of transmission.

Last Answer : Ans: A Size of conductor depends upon amount of current flow.

comparison between Feeder and Distribution

Description : comparison between Feeder and Distribution

Last Answer : Sr.No Feeder Distributor 1 It is link between receiving substation & distribution transformer   It is link between distribution transformer substation & consumer  2 ... loading point is at substation only   Distributors loading point is throughout its length. 

The length cf air gap to be provided in ______ is primarily determined by power factor consideration. (a) d.c. series motor . (b) d.c. shunt motor (c) induction motor (d) synchronous motor

Description : The length cf air gap to be provided in ______ is primarily determined by power factor consideration. (a) d.c. series motor . (b) d.c. shunt motor (c) induction motor (d) synchronous motor

Last Answer : (c) induction motor

Can Arduino be used for building a smart pet feeder?

Description : Can Arduino be used for building a smart pet feeder?

Last Answer : Yes, Arduino can be used for building a smart pet feeder by using sensors to detect the presence of the pet and the level of food, and by using actuators to dispense the food, and by using communication modules to transmit data to a display or a control system.

Can Arduino be used for building a smart pet feeder?

Description : Can Arduino be used for building a smart pet feeder?

Last Answer : Yes, Arduino can be used for building a smart pet feeder by using sensors to detect the presence and behavior of the pet, and by using actuators to dispense food or treats at the appropriate times.

Have you ever seen a bird feeder ignored?

Description : Have you ever seen a bird feeder ignored?

Last Answer : Update: Oooh, oooh! A house finch couple are on the sock now! Anyway, I am surprised it took two months. Is that normal?

Bird feeder/watchers: IYO do birds actually favor one "flavor" of suet cake over another?

Description : Bird feeder/watchers: IYO do birds actually favor one "flavor" of suet cake over another?

Last Answer : answer:Maybe not for flavor exactly, but for different nutritional benefits? I could buy that they have preferences, though. I know the titmice will pick through our variety of food, throwing away ... the taste of the peanuts or the peanuts just provide nutrients they really need is a mystery!

What kind of bird seed should I have in my window bird feeder?

Description : What kind of bird seed should I have in my window bird feeder?

Last Answer : What kind of birds are you wanting to attract? What is in the area? More help here. http://www.allaboutbirds.org/page.aspx?pid=1200

Just got a cedar bird feeder: should I put some kind of protectant on it before I hang it outside?

Description : Just got a cedar bird feeder: should I put some kind of protectant on it before I hang it outside?

Last Answer : jca, I don’t think you should do anything to cedar. It is naturally resistant to the elements and weathers very nicely.

Is the stuff in a bird feeder properly called "bird food" or "bird seed"?

Description : Is the stuff in a bird feeder properly called "bird food" or "bird seed"?

Last Answer : I call it bird seed. I’ve never heard it referred to as bird food, but I’m sure that is okay to say.

I have a bird feeder that has a bit of rust (see photos inside); is it going to hurt the birds?

Description : I have a bird feeder that has a bit of rust (see photos inside); is it going to hurt the birds?

Last Answer : I don’t think it will hurt the birds. You could always paint over it with a nontoxic paint to be sure. The paint won’t eliminate the rust, but if you sand it with some steel wool first it will protect the birds from the rust.

What birds have visited your feeder recently?

Description : What birds have visited your feeder recently?

Last Answer : I don’t have a feeder, but I have a partially dead partially alive red-leafed cherry outside my window. Yesterday, I had a downy woodpecker and a dove.

How do birds "find" the bird feeder?

Description : How do birds "find" the bird feeder?

Last Answer : Twitter feeds?

Best value all-in-one printer/copier/scanner with document feeder?

Description : Best value all-in-one printer/copier/scanner with document feeder?

Last Answer : There are a ton of them. Stick to a brand name you know and read the owner reviews on Newegg.com and Amazon.

CAT LOVERS AGAIN - What's the best way to keep a kitten from going on top of my scanner? I had to remove the Automatic Document Feeder because her weight will eventually crack the plastic.

Description : CAT LOVERS AGAIN - What's the best way to keep a kitten from going on top of my scanner? I had to remove the Automatic Document Feeder because her weight will eventually crack the plastic.

Last Answer : There is a product called a scat mat that gives them a small electric jolt (like a static discharge) - it doesn't harm them (I've stepped on them plenty of times myself), and I guarantee you ... to put something offensive smelling to the cat in the area (citrus, pine, mint, etc) as a repellent.

is a flea a forager, grazer, filter feeder, predator, scavenger, or a parasites?

Description : is a flea a forager, grazer, filter feeder, predator, scavenger, or a parasites?

Last Answer : A flea is a parasite because it lives on another animal orliving thing harming or irritating it with its presence.

I have a beautiful glass globe hummingbird feeder that has a rubber stopper. How can I stop the nectar from leaking out of the stopper?

Description : I have a beautiful glass globe hummingbird feeder that has a rubber stopper. How can I stop the nectar from leaking out of the stopper?

Last Answer : If there is debris on the stopper it might be preventing a good seal. Try removing the rubber stopper and wipe it off to remove any debris that might be on it. Clean out the hole that the stopper goes into ... hole, making sure it is a tight fit. If it still leaks you may need to buy a new stopper.

In accordance with Coast Guard Regulations (46 CFR), a steering gear feeder circuit from the emergency switchboard or alternate power supply must have the capacity for continuous operation of the rudder 15° side to side in not more than 60 seconds for a A. 1/4 hour B. 1/2 hour C. 1 hour D. 2 hours

Description : In accordance with Coast Guard Regulations (46 CFR), a steering gear feeder circuit from the emergency switchboard or alternate power supply must have the capacity for continuous operation of the rudder 15° side to side in not more than 60 seconds for a A. 1/4 hour B. 1/2 hour C. 1 hour D. 2 hours

Last Answer : Answer: B

Upon failure of the normal power supply, the emergency generator is placed on the line by the _____________. A. bus tie feeder B. automatic bus transfer device C. line connection feeder D. power failure alarm bus

Description : Upon failure of the normal power supply, the emergency generator is placed on the line by the _____________. A. bus tie feeder B. automatic bus transfer device C. line connection feeder D. power failure alarm bus

Last Answer : Answer: B

The electrical schematic shown in the illustration indicates the lighting feeder circuit is _____________. EL-0014 A. three phase, 450 volt, and 60 cycle B. three phase, 120 volt, and 60 cycle C. single phase, 120 volt, and 60 cycle D. not specified

Description : The electrical schematic shown in the illustration indicates the lighting feeder circuit is _____________. EL-0014 A. three phase, 450 volt, and 60 cycle B. three phase, 120 volt, and 60 cycle C. single phase, 120 volt, and 60 cycle D. not specified

Last Answer : Answer: A

Upon failure of the normal power supply, the emergency generator is placed on the line by the _____________. A. main bus tie feeder B. automatic bus transfer device C. line connection feeder D. power failure alarm bus

Description : Upon failure of the normal power supply, the emergency generator is placed on the line by the _____________. A. main bus tie feeder B. automatic bus transfer device C. line connection feeder D. power failure alarm bus

Last Answer : Answer: B

Which of the listed precautions should be taken when cleaning the internals of a motor with compressed air? A. Open the machine on both ends so as to allow the air and dust to escape. B. Be certain that the circuit breaker is opened and tagged on the feeder panel. C. Be certain that the air is clean and as dry as possible. D. All of the above.

Description : Which of the listed precautions should be taken when cleaning the internals of a motor with compressed air? A. Open the machine on both ends so as to allow the air and dust to escape. B. Be certain that the ... panel. C. Be certain that the air is clean and as dry as possible. D. All of the above.

Last Answer : Answer: D

What are the types of graded used in line of radial relay feeder?

Description : What are the types of graded used in line of radial relay feeder?

Last Answer : Definite time relay and inverse-definite time relay.

What are the protections provided for motor feeder?

Description : What are the protections provided for motor feeder?  

Last Answer : Ith - Thermal over load I2S - Unbalance load I0S - Earth fault protection I1t - Stalling protection I1Inst. - Short circuit protection 

Why under voltage tripping of motor is incorporated in motor feeder breakers?

Description : Why under voltage tripping of motor is incorporated in motor feeder breakers? 

Last Answer : The under voltage can occur in case of bus fault. If the motors are kept connected they will feed the fault which may cause the damage. Due to the back feeding from the motor the motor will slow down ... case pht motor will not rotate for the designed 3 minute period in case of bus under voltage).  

Lowering the soil grade around a tree removes many of the tree’s __________ roots. a. Tap b. Aerial c. Feeder d. Aquatic

Description : Lowering the soil grade around a tree removes many of the tree’s __________ roots. a. Tap b. Aerial c. Feeder d. Aquatic

Last Answer : Feeder

in disc harrow, It prevents disc from clogging. a. Feeder c.Jointer d. None of the above.

Description : in disc harrow, It prevents disc from clogging. a. Feeder c.Jointer d. None of the above.

Last Answer : Ans - b. Spacer

Which of the following equipment, for regulating the voltage in distribution feeder, will be most economical ? (a) Static condenser (b) Synchronous condenser (c) Tap changing transformer (d) Booster transformer

Description : Which of the following equipment, for regulating the voltage in distribution feeder, will be most economical ? (a) Static condenser (b) Synchronous condenser (c) Tap changing transformer (d) Booster transformer

Last Answer : (d) Booster transformer

A feeder, in a transmission system, feeds power to (a) distributors (b) generating stations (c) service mains (d) all of the above

Description : A feeder, in a transmission system, feeds power to (a) distributors (b) generating stations (c) service mains (d) all of the above

Last Answer : (a) distributors

Transmitted power remaining the same, if supply voltage of a D.C. 2-wire feeder is increased 100 percent, saving in copper is (a) 25 percent (b) 50 percent (c) 75 percent (d) 100 percent

Description : Transmitted power remaining the same, if supply voltage of a D.C. 2-wire feeder is increased 100 percent, saving in copper is (a) 25 percent (b) 50 percent (c) 75 percent (d) 100 percent

Last Answer : (b) 50 percent

Industries producing complete articles for direct consumption & also processing industries is called as_______________. A. Manufacturing industries. B. Feeder Industries. C. Service Industries. D. Mining or Quarrying.

Description : Industries producing complete articles for direct consumption & also processing industries is called as_______________. A. Manufacturing industries. B. Feeder Industries. C. Service Industries. D. Mining or Quarrying.

Last Answer : A. Manufacturing industries.

One of the following is filter feeder (a) Unio (b) Paramecium (c) Whale (d) All

Description : One of the following is filter feeder (a) Unio (b) Paramecium (c) Whale (d) All

Last Answer : (d) All

How To Make An Eco Bird Feeder

Description : How To Make An Eco Bird Feeder

Last Answer : Birds in your garden or within your abode are a very nice addition to your whole house's overall look. In order for those twittering visitors to have a place to stay in your garden, try making them a ... into which you can put the feed in, as well as a bigger opening for birds to go through.

How To Make A Recycled Bird Feeder

Description : How To Make A Recycled Bird Feeder

Last Answer : This bird feeder is simple enough to make in the classroom. It requires simple tools and most of the materials can be easily gathered, for example, after the family had some Chinese take-out food. The project ... 3/4 full of seeds. Finally, put the cap back on the bottle; hang the feeder, and

How To Make A Milk Container Bird Feeder

Description : How To Make A Milk Container Bird Feeder

Last Answer : First, you thoroughly wash out the quart milk container. With sharp scissors, you cut two rectangular flaps on opposite sides of the container - each flap should be about two inches up from the bottom of ... feeders, each with a different kind of seed, and you'll see what birds enjoy which seeds.

Draw neat circuit diagram of i) Feeder reactor and ii) Generator reactor

Description : Draw neat circuit diagram of i) Feeder reactor and ii) Generator reactor

Last Answer : 1) Circuit Diagram of Feeder Reactor : 2) Circuit Diagram of Generator Reactor :

What is meant by feeder in power system?

Description : What is meant by feeder in power system?

Last Answer : A feeder line is a peripheral route or branch in a network which connects smaller or more remote nodes with a route or branch carrying heavier traffic. The term is applicable to any system based on a hierarchical network.

.In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Description : .In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Last Answer : A. Liquid pressure and the nozzle characteristics

In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Description : In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Last Answer : a) Liquid pressure and the nozzle characteristics

In which situation the divisional structure happens to be appropriate? a. Where the number of major products is more than one b. Where the size of the organization is quite large c. Both (a) and (b) d. Where primarily only one product is sold

Description : In which situation the divisional structure happens to be appropriate? a. Where the number of major products is more than one b. Where the size of the organization is quite large c. Both (a) and (b) d. Where primarily only one product is sold

Last Answer : c. Both (a) and (b)

How is 1 serving size determined on nutrition labels?

Description : How is 1 serving size determined on nutrition labels?

Last Answer : Serving size is based on the nutrients delivered by a specific amount of a particular food. Beef and pork, which tend to be higher in fat than chicken or fish, are smaller for "one serving," ... Pyramid, which is intended to help us make good choices to put together a healthful diet/eating regimen.

The resistance value of a resistor in a circuit can best be determined by the _____________. A. single solid body color of the resistor B. band markings on the resistor C. amperage value written on the resistor D. physical size of the resistor

Description : The resistance value of a resistor in a circuit can best be determined by the _____________. A. single solid body color of the resistor B. band markings on the resistor C. amperage value written on the resistor D. physical size of the resistor

Last Answer : Answer: B

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

Problems with using Lines of Code to measure the size of a product include(s) a) The creation of source code is only part of the development effort b) The Lines of Code (LOC) will differ between languages and cannot bemeasured for some languages c) Should comments, data definitions etc (i.e. non-executable LOC) be includedas well? D) The final size (kLOC) can only be determined once the product is delivered e) All of the above.

Description : Problems with using Lines of Code to measure the size of a product include(s) a) The creation of source code is only part of the development effort b) The Lines of Code (LOC) will differ between ... The final size (kLOC) can only be determined once the product is delivered e) All of the above.

Last Answer : e) All of the above.

In an egg, the type of cleavage is determined by (a) the amount and distribution of yolk (b) the number of egg membranes (c) the shape and size of the sperm (d) the size and location of the nucleus.

Description : In an egg, the type of cleavage is determined by (a) the amount and distribution of yolk (b) the number of egg membranes (c) the shape and size of the sperm (d) the size and location of the nucleus.

Last Answer : (a) the amount and distribution of yolk

The structure of newspaper is determined by: A. Circulation B. Frequency of publication C. Size D. None of these

Description : The structure of newspaper is determined by: A. Circulation B. Frequency of publication C. Size D. None of these

Last Answer : A. Circulation

Size of MB plow is determined by (a) depth of cut (b) width of cut (c) number of accessories (d) none of the above

Description : Size of MB plow is determined by (a) depth of cut (b) width of cut (c) number of accessories (d) none of the above

Last Answer : (b) width of cut

In a magnetic material hysteresis loss takes place primarily due to?

Description : In a magnetic material hysteresis loss takes place primarily due to?

Last Answer : In a magnetic material hysteresis loss takes place primarily due to it high retentivity.