my kalanchoe is bending over and the leaves are drying out

my kalanchoe is bending over and the leaves are drying out
by

1 Answer

Answer :

Need Answer
by

Related questions

On my Kalanchoe, some of the leaves are dried, crispy and yellow. Any idea as to what I'm doing wrong?

Description : On my Kalanchoe, some of the leaves are dried, crispy and yellow. Any idea as to what I'm doing wrong?

Last Answer : your best bet is to Google the plant you have and see what other gardeners say about it. Personally, I am not familiar with that particular plant.

Why are my leaves curling onn my kalanchoe

Description : Why are my leaves curling onn my kalanchoe

Last Answer : Need Answer

can I prune kalanchoe plants?

Description : can I prune kalanchoe plants?

Last Answer : Need Answer

kalanchoe hasn't bloomed for years, how to get to bloom?

Description : kalanchoe hasn't bloomed for years, how to get to bloom?

Last Answer : Needs slow release pellet fertilizer.

why is the stalks of my kalanchoe turning black

Description : why is the stalks of my kalanchoe turning black

Last Answer : Need Answer

my kalanchoe has brown stems do I get rid of it?

Description : my kalanchoe has brown stems do I get rid of it?

Last Answer : Need Answer

how to care for silver dollar kalanchoe

Description : how to care for silver dollar kalanchoe

Last Answer : Need Answer

kalanchoe flowers turn brown

Description : kalanchoe flowers turn brown

Last Answer : Need Answer

How do I care for my Kalanchoe plant

Description : How do I care for my Kalanchoe plant

Last Answer : Need Answer

Oudoor growing Kalanchoe

Description : Oudoor growing Kalanchoe

Last Answer : Need Answer

received a kalanchoe how do i know if i can plant outside live in middle eastern wisconsin?

Description : received a kalanchoe how do i know if i can plant outside live in middle eastern wisconsin?

Last Answer : Hey. enjoy you kalancho until frost time, dig and bring inside in a sunny window. Better yet, put in a pot and take outside for warm weather. They are not winter or frost hardy. Sorry.

why do my burning bushes have a film net like over the top and the leaves are drying up

Description : why do my burning bushes have a film net like over the top and the leaves are drying up

Last Answer : spider mites, they need treated or will defoliate

The leaves of the Chinese maple tree are curling and drying out. What should I do?

Description : The leaves of the Chinese maple tree are curling and drying out. What should I do?

Last Answer : Need Answer

Why are the leaves on my butterfly bush turning brown, drying out and dropping off

Description : Why are the leaves on my butterfly bush turning brown, drying out and dropping off

Last Answer : Need Answer

Why are the leaves drying out on my tolmiea plant

Description : Why are the leaves drying out on my tolmiea plant

Last Answer : Your plant is being cooked by the Sun. When you water it, be sure to mist it as well. Watering is fine but the misting should alleviate your problem. And I would suggest that you mist your plant at least twice a week, two or three days apart. -Birdy

my eucalyptus plant leaves are drying out

Description : my eucalyptus plant leaves are drying out

Last Answer : Need Answer

the leaves on apple tree turning rust color ,drying and falling off

Description : the leaves on apple tree turning rust color ,drying and falling off

Last Answer : Try adding some sugar to the tree's diet, add 1 1/2 cups of sugar to 1 gallon of water, and pour this mixture at the base of the tree, then wait and see, effects should occur with 7 to 10 days.

Why are my bean plant leaves shrivilling up and drying?2243

Description : Why are my bean plant leaves shrivilling up and drying?2243

Last Answer : beans & cucumbers don't like to be touched when they are wet.......wait until the sun goes down and they cool off and mulch there. If that does not work you might need to plant new beans. When you water....water the roots. Happy summer.

why is my zucchini leaves turning brown and drying up ?

Description : why is my zucchini leaves turning brown and drying up ?

Last Answer : could be a number of things but my guess would be to much water or not enough water

Why are the leaves on my sedum drying up?

Description : Why are the leaves on my sedum drying up?

Last Answer : Mine is in the early morning sun early am and when the sun is high under the shade.......I don't water it but I have it in a deep cement container

Leaves are drying up 1 month after planting them:-(

Description : Leaves are drying up 1 month after planting them:-(

Last Answer : Need Answer

Why are my cucumber plants, leaves turning yellow & drying up mid season every year ?

Description : Why are my cucumber plants, leaves turning yellow & drying up mid season every year ?

Last Answer : For us I have found that they need more water than the rest of the garden and when it rains and the leaves are still wet they will die off if you touch them. This fall went you pull our the plants.... ... fence for them to climb on. I don't rotate them they like to be in the same place every year.

zucchini plant leaves drying up

Description : zucchini plant leaves drying up

Last Answer : You may have the insect most hated by growers of squash - the squash bug. These bugs suck the juice out of the plant and the adults are nearly impossible to kill, at least with anything chemical free. To ... find. They do not come off easily. Make sure to kill the eggs. Hope this helps. Good luck!

hop leaves discoloring and drying up

Description : hop leaves discoloring and drying up

Last Answer : Need Answer

why are my gardenia plant leaves turning yellow and drying up?

Description : why are my gardenia plant leaves turning yellow and drying up?

Last Answer : Need Answer

My rhododendron leaves have turned brown and drying up during the hot, dry weather - can I prune these now?

Description : My rhododendron leaves have turned brown and drying up during the hot, dry weather - can I prune these now?

Last Answer : You can remove dead blossoms by lightly bending the plant end until it breaks off. This will help the plant to produce the best blooms the next year.

Which of the following is not one of the important steps in processing tea leaves? (a) Withering (b) Rolling (c) Fermenting (d) Drying

Description : Which of the following is not one of the important steps in processing tea leaves? (a) Withering (b) Rolling (c) Fermenting (d) Drying

Last Answer : Ans: (c)

Which of the following is NOT one of the important steps in processing tea leaves? (1) Rolling (2) Drying (3) Fermenting (4) Withering

Description : Which of the following is NOT one of the important steps in processing tea leaves? (1) Rolling (2) Drying (3) Fermenting (4) Withering

Last Answer : (3) Fermenting Explanation: Generally, there are four different tea categories that differ in processing methods. By withering, new picked leaves are thinly spread to dry during this process, Heated air is ... water content. By the end of withering, the leaves should be pliable enough to be rolled.

Which of the following is NOT one of the important steps in processing tea leaves? (1) Rolling (2) Drying (3) Fermenting (4) Withering

Description : Which of the following is NOT one of the important steps in processing tea leaves? (1) Rolling (2) Drying (3) Fermenting (4) Withering 

Last Answer : Fermenting

The leaves of multi-leaf springs are subjected to (A) bending stress (B) shear stress (C) axial stress (D) all of the above

Description : The leaves of multi-leaf springs are subjected to (A) bending stress (B) shear stress (C) axial stress (D) all of the above

Last Answer : (A) bending stress

Bending stress in graduated length leaves are more than that in full length leaves. a) Yes b) No c) In some cases d) Can’t be stated

Description : Bending stress in graduated length leaves are more than that in full length leaves. a) Yes b) No c) In some cases d) Can’t be stated

Last Answer : b) No

Which tissue primarily attributes to easy bending of various parts of plants (like stem, leaves)?

Description : Which tissue primarily attributes to easy bending of various parts of plants (like stem, leaves)?

Last Answer : Collenchyma

Bending stress in graduated length leaves are more than that in full length leaves. (a) Yes (b) No (c) In some cases (d) Can’t be stated

Description : Bending stress in graduated length leaves are more than that in full length leaves. (a) Yes (b) No (c) In some cases (d) Can’t be stated

Last Answer : (b) No

Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. Compressed air should be blown over areas where dust is deposited. C. Spraying a solvent periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Description : Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. ... periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Last Answer : Answer: D

Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Description : Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Boring question #86: How wealthy do you have to be to not bother bending over to pick up abandoned pennies?

Description : Boring question #86: How wealthy do you have to be to not bother bending over to pick up abandoned pennies?

Last Answer : answer:My great uncle is incredibly rich. He owns a company that makes artificial hearts, one that makes exercise equipment and a couple other that I forget what they do. He will still bend over ... it, he actually understands the value of money unlike some other rich people who grew up rich.

Can you bend over and touch your toes without bending your knees?

Description : Can you bend over and touch your toes without bending your knees?

Last Answer : No – I’m fairly agile but I have very tight hamstrings.

Can I hurt my un-born baby by bending over?

Description : Can I hurt my un-born baby by bending over?

Last Answer : Short answer – no. The baby is safely enclosed inside the uterus with a cushion of water. A blow to the abdomen could hurt the baby, other than that, not much in a physical sense.

A doctor advises a patient to take plenty of citrus fruits, guavas, tomatoes and amlas over a period of two months regularly. What do you think is the complaint of the patient? (a) Softness and pain in bones, bending of vertebral column (b) Gums spongy, swollen and bleed easily (c) Blurred vision, burning and dryness of eye and tongue, cracking of skin of angle of mouth (d) Extreme weakness, swelling and pain in legs, loss of appetite, headache

Description : A doctor advises a patient to take plenty of citrus fruits, guavas, tomatoes and amlas over a period of two months regularly. What do you think is the complaint of the patient? (a) Softness and ... skin of angle of mouth (d) Extreme weakness, swelling and pain in legs, loss of appetite, headache

Last Answer : Ans:(b)

The bending of radio waves passing over the top of a mountain range that disperses a weak portion of the signal behind the mountain is A. eddy-current phase effect B. knife-edge diffraction C. shadowing D. mirror refraction effect

Description : The bending of radio waves passing over the top of a mountain range that disperses a weak portion of the signal behind the mountain is A. eddy-current phase effect B. knife-edge diffraction C. shadowing D. mirror refraction effect

Last Answer : B. knife-edge diffraction

A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending strain energy stored in the bar, is (A) 411 N mm (B) 511 N mm (C) 611 N mm (D) 711 N mm

Description : A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a  load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending  strain energy stored in the ... (A) 411 N mm  (B) 511 N mm  (C) 611 N mm  (D) 711 N mm 

Last Answer : (C) 611 N mm 

A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2 , the depth of the joist, is (A) 200 mm (B) 250 mm (C) 300 mm (D) 400 mm

Description : A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so  that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the  value of E = 0.2 ... joist, is  (A) 200 mm  (B) 250 mm  (C) 300 mm  (D) 400 mm 

Last Answer : (D) 400 mm 

A cantilever carrying a uniformly distributed load W over its full length is propped at its free end such that it is at the level of the fixed end. The bending moment will be zero at its free end also at (A) Midpoint of the cantilever (B) Fixed point of the cantilever (C) 1/4th length from free end (D) 3/4th length from free end

Description : A cantilever carrying a uniformly distributed load W over its full length is propped at its free end such that it is at the level of the fixed end. The bending moment will be zero at its free end also at ... point of the cantilever (C) 1/4th length from free end (D) 3/4th length from free end

Last Answer : (D) 3/4th length from free end

The shape of the bending moment diagram over the length of a beam, having no external load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, having no external load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Last Answer : (A) Linear

The shape of the bending moment diagram over the length of a beam, carrying a uniformly distributed load is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, carrying a uniformly  distributed load is always  (A) Linear  (B) Parabolic  (C) Cubical  (D) Circular

Last Answer : (B) Parabolic 

The shape of the bending moment diagram over the length of a beam, carrying a uniformly increasing load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, carrying a uniformly  increasing load, is always  (A) Linear  (B) Parabolic  (C) Cubical  (D) Circular 

Last Answer : (C) Cubical 

When a slab is continuous over several spans, negative (i.e. hogging ) bending moment is induced over the (a) End supports (b) Intermediate supports (c) Both (a) & (b) (d) Non of the

Description : When a slab is continuous over several spans, negative (i.e. hogging ) bending moment is induced over the (a) End supports (b) Intermediate supports (c) Both (a) & (b) (d) Non of the

Last Answer : (b) Intermediate supports

In a simply supported beam loaded with U.D.L over the whole section, the bending stress is …………. at top and ………….. at bottom. (a) Compressive, tensile (b) Tensile, compressive (c) Tensile, zero (d) Compressive, zero

Description : In a simply supported beam loaded with U.D.L over the whole section, the bending stress is …………. at top and ………….. at bottom. (a) Compressive, tensile (b) Tensile, compressive (c) Tensile, zero (d) Compressive, zero

Last Answer : (a) Compressive, tensile

Maximum bending moment in a cantilever beam having a UDL over entire length will be (a) wL2/2 (b) wL2/4 (c) wL2/8 (d) None

Description : Maximum bending moment in a cantilever beam having a UDL over entire length will be (a) wL2/2 (b) wL2/4 (c) wL2/8 (d) None

Last Answer : a) wL2/2

Maximum bending moment in a S.S. beam having a UDL over entire length will be (a) wL2/2 (b) wL2/4 (c) wL2/8 (d) None

Description : Maximum bending moment in a S.S. beam having a UDL over entire length will be (a) wL2/2 (b) wL2/4 (c) wL2/8 (d) None

Last Answer : (c) wL2/8