A current is said to be alternating when it changes in : - 

a) Magnitude only b) Direction only c) Both magnitude and direction d) None

1 Answer

Answer :

 Acurrent is said to be alternating when it changes in : - Both magnitude and direction

Related questions

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

Description : Alternating current (AC)

Last Answer : AC stands for Alternating Current meaning voltage or current that changes polarity or direction respectively over time. An Alternating Current (AC) is an electric current whose magnitude ... energy are known as alternators and are simpler construction than DC electromechanical generators.

Description : Describe the difference between direct and alternating current.

Last Answer : Direct current is the flow of electricity or charge in one direction..  Alternative current is the flow of charge that doesn't flow in one direction. 

Description : The r.m.s. value of a half-wave rectified alternating current is 10 A. Its value for full-wave rectification will be  

Last Answer : The RMS value of a half-wave rectified current is 10 Ampere. Its value for full-wave rectification would be: 14.14 Ampere

Description : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be  a. Iav=10A b. Irms=10A c. Ipeak=10A 

Last Answer : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be Irms=10A

Description : When an alternating potential is applied to a capacitor, the current in the circuit will  1. lead the applied potential 2. lag the applied potential 3. be in phase with the applied potential 4. none 

Last Answer : When an alternating potential is applied to a capacitor, the current in the circuit will lead the applied potential

Description : When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Last Answer : When an alternating current passes through an ohmic resistance the electrical power converted into heat is true power.

Description : The frequency of an alternating current is?

Last Answer : The frequency of an alternating current is the number of waves passing through a point in one second.

Description : In the case of an unsymmetrical alternating current the average value must always be taken over?

Last Answer : In the case of an unsymmetrical alternating current the average value must always be taken over the whole cycle.

Description : The reactance offered by a capacitor to alternating current of frequency 50 Hz is 20 Q. If frequency is increased to 100 Hz, reactance becomes_____ohms.

Last Answer : The reactance offered by a capacitor to alternating current of frequency 50 Hz is 20 Q. If frequency is increased to 100 Hz, reactance becomes 10 ohms.

Description : Can you make alternating current through a battery?

Last Answer : Yes, we can make AC through a battery using an inverter.

Description : What is the difference between alternating current and direct current?

Last Answer : Direct current is a constant flow of electrons in one direction. Alternating current means that the current moves back and forth and transfers the electricity that way. DC is typically used with battery power and AC is used for long distance electricity transportation.

Description : 3. Which sources produce alternating current? -Physics-10

Last Answer : Power plants and AC generators are some of the sources that produce alternating current.

Description : What is Alternating Current ( AC) ?

Last Answer : An alternating current is a current that changes direction as it flows and its value changes every moment . We can get alternating current from alternators.

Description : What is Alternating Current ?

Last Answer : An alternating current is a current that changes direction as it flows, and its value changes every moment.

Description : A sinusoidally alternating current of frequency 60 Hz has a maximum value of 15 A. Find the value of current after 1/200 second

Last Answer : A sinusoidally alternating current of frequency 60 Hz has a maximum value of 15 A. Find the value of current after 1/200 second

Description : The method of magnetization is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Last Answer : (1) hammering a magnet Explanation: Hammering a rod will either allow it to become slightly magnetic inlaid along a magnetic field (i.e.North - South) or demagnetize it if laid across the field lines (i.e. East-West). A current passing through a coil will produce a magnetic field.

Description : Rectifiers are used to convert - (1) Direct current to Alternating current (2) Alternating current to Direct current (3) high voltage to low voltage (4) low voltage to high voltage

Last Answer : (2) Alternating current to Direct current Explanation: Converting DC power from one voltage to another is much more complicated. One method of DC-to-DC conversion first converts power to AC (using a ... inverter), then uses a transformer to change the voltage, and finally rectifies power back to DC.

Description : Rectifiers are used to convert - (1) Direct current to Alternating current (2) Alternating current to Direct current (3) high voltage to low voltage (4) low voltage to high voltage

Last Answer : (2) Alternating current to Direct current Explanation: Converting DC power from one voltage to another is much more complicated. One method of DC-to-DC conversion first converts power to AC (using a ... inverter), then uses a transformer to change the voltage, and finally rectifies power back to DC.

Description : What is the name of the device used to convert alternating cur-rent into direct current? (1) Amreter (2) Galvanometer (3) Rectifier (4) Transformer

Last Answer : (3) Rectifier Explanation: A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The process is known as rectification.

Description : Alternating current is converted into direct current by a – (1) Transformer (2) Dynamo (3) Oscillator (4) Rectifier

Last Answer : (4) Rectifier Explanation: A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The process is known as rectification.

Description : Coast Guard Regulations (46 CFR) require that each alternating current generator arranged for parallel operation shall be provided with _____________. A. more than one means of excitation B. individual circuit fuses C. a high back-pressure trip D. a reverse-power trip

Last Answer : Answer: D

Description : When a megohmmeter is being used on a alternating current machine, the meter pointer will dip toward 'zero' and then gradually rise to the true resistance value if the motor insulation is _____________. A. grounded B. good C. shorted D. dirty

Last Answer : Answer: B

Description : In an alternating current electrical system, a low system power factor is a direct sign of _____________. A. wasted energy B. efficient operation C. a short in the exciter field windings D. an excessive number of minor system grounds

Last Answer : Answer: A

Description : Current flowing in only one direction is called ___________. A. alternating current B. omnidirectional current C. direct current D. sinusoidal current

Last Answer : Answer: C

Description : A device used in an electrical circuit to change alternating current to direct current, is known as a _____________. A. current transformer B. rectifier C. condenser D. shunt

Last Answer : Answer: B

Description : If many turns of an alternating current coil for a contactor become short circuited, the coil _____________. A. will continue to operate B. will probably burn out immediately C. will operate on reduced current D. temperature will drop

Last Answer : Answer: B

Description : Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. ... . D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Last Answer : Answer: C

Description : Which of the listed devices may be installed on a large diesel-electric alternating current propulsion generator? A. Temperature detector coils inserted in the stator slots for measuring stator temperature. B. ... . C. Electric space heaters to prevent condensation of moisture. D. All of the above.

Last Answer : Answer: D

Description : If many turns of an alternating current coil for a contactor become short circuited, the coil _____________. A. temperature will drop B. will probably burn out immediately C. will continue to operate D. will operate on reduced current

Last Answer : Answer: B

Description : Possible phase relationships between voltage and current in an alternating current circuit include which of the following conditions? A. Current and voltage may be in phase. B. Current may lead the voltage. C. Current may lag the voltage. D. All of the above.

Last Answer : Answer: D

Description : The charge of a lead-acid battery can be restored by ______. A. passing an alternating electric current through the cell B. passing a direct electric current through the cell C. adding acid to the electrolyte D. all of the above

Last Answer : Answer: B

Description : Which of the following components are used to convert alternating current produced in the generator windings to direct current? A. Armature and equalizer B. Commutator and brushes C. Rotor and interpoles D. Field and exciter

Last Answer : Answer: B

Description : Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: D

Description : Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: C

Description : The purpose of the commutator and brushes on a DC generator is to _____________. A. transfer generated direct current voltage from the armature to the line B. convert the alternating voltage ... contact method to excite the field D. reduce sparking between the armature and the carbon brushes

Last Answer : Answer: B

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

Description : Which of the listed devices may be installed on a large turbo-electric alternating current propulsion generator? A. Temperature detector coils inserted in the stator slots for measuring stator temperature. B. A ... . C. Electric space heaters to prevent condensation of moisture. D. All of the above.

Last Answer : Answer: D

Description : Alternating current is converted into direct current by using –

Last Answer : Rectifier

Description : A cottrell precipitator makes use of the __________ for dusty air cleaning. (A) Electric spark (B) Corona discharge (C) Alternating current

Last Answer : (B) Corona discharge

Description : Mention the uses of alternating current.

Last Answer : 1. Alternating current is used in domestic appliances like lamps, heaters, fans, ovens, radio etc. 2. It is used to produce required frequency of radio waves for radio and T.V transmission ... communication. 4. It is used to produce ultrasonic waves used in industries, ultrasound scanning and SONAR.

Description : Graph of alternating current is a A. cos wave B. tan wave C. curve D. sine wave

Last Answer : sine wave

Description : In transformer, alternating current is induced inA. primary coil B. secondary coil C. iron core D. resistor

Last Answer : primary coil

Description : What is Alternating Current? 

Last Answer : Continually changing amount and direction of the current and voltage is called alternating current (AC). The components of an ac circuit causes a time period to be introduced between current and voltage; that is, current and voltage are out of phase. 

Description : Define AC (Alternating current).

Last Answer : Alternating current is that type of electric current, which changes it’s magnetude and direction periodically.

Description : Alternating current measured in a transmission line will be a) Peak value b) Average value c) RMS value d) Zero

Last Answer : c) RMS value

Description : A cable carrying alternating current has (a) hysteresis losses only (b) hysteresis and leakage losses only (c) hysteresis, leakage and copper losses only (d) hysteresis, leakage, copper and friction losses

Last Answer : (b) hysteresis and leakage losses only

Description : What is the device called that will separate alternating current from direct current, or that will separate alternating current of one frequency from other alternating currents of different frequencies?

Last Answer : A filter.

Description : What is a nonrotating device that produces alternating current?

Last Answer : Oscillator.

Description : Define alternating current.

Last Answer : An electrical current which is constantly varying in amplitude, and which changes direction at regular intervals.