The r.m.s. value of a half-wave rectified alternating current is 10 A. Its value for full-wave rectification will be

The r.m.s. value of a half-wave rectified alternating current is 10 A. Its value for full-wave rectification will be  
by

1 Answer

Answer :

The RMS value of a half-wave rectified current is 10 Ampere. Its value for full-wave rectification would be: 14.14 Ampere

by

Related questions

If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the top lead positive with repect to the lower lead B. direct current, half wave rectified with a ripple frequency of 60 hz C. direct current with the top lead negative with repect to the lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Description : If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the ... lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Last Answer : Answer: C

One diode of a full-wave rectifier has burned out in a shorted condition. Therefore, the output will be ____________. A. zero B. a rectified half-wave C. a rectified full-wave D. equal to the AC input

Description : One diode of a full-wave rectifier has burned out in a shorted condition. Therefore, the output will be ____________. A. zero B. a rectified half-wave C. a rectified full-wave D. equal to the AC input

Last Answer : Answer: D

A full-wave rectifier has one diode burned out in an open condition, what will be the output characteristic of the device? A. Zero B. Half-wave rectified C. Full-wave rectified D. Equal to the AC input

Description : A full-wave rectifier has one diode burned out in an open condition, what will be the output characteristic of the device? A. Zero B. Half-wave rectified C. Full-wave rectified D. Equal to the AC input

Last Answer : Answer: B

The ripple voltage in the output of a single phase half wave rectifier with 10 V rectified dc

Description : The ripple voltage in the output of a single phase half wave rectifier with 10 V rectified dc voltage with resistive load and without filter will be • 12.1 volt • 1.21 volt • 0.482 volt • 4.82 volt

Last Answer : The ripple voltage in the output of a single phase half wave rectifier with 10 V rectified dc voltage with resistive load and without filter will be 12.1 volt

An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to

Description : An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to  (1) 1.414 times dc sensitivity (2) dc sensitivity (3) 0.9 times dc sensitivity (4) 0.707 times dc sensitivity

Last Answer : An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to 0.9 times dc sensitivity

Rectification efficiency of a full wave rectifier without filter is nearly equals to:

Description : Rectification efficiency of a full wave rectifier without filter is nearly equals to:  (1) 51% (2) 61% (3) 71% (4) 81%

Last Answer : Rectification efficiency of a fullwave rectifier without filter is nearly equals to: 81%

The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

Description : The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

Last Answer : (60*√2)Sin(2π*50*t)

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

For a sine wave with peak value Imax the r.m.s. value is?

Description : For a sine wave with peak value Imax the r.m.s. value is?

Last Answer : For a sine wave with peak value Imax the r.m.s. value is 0.707.

Graph of alternating current is a A. cos wave B. tan wave C. curve D. sine wave

Description : Graph of alternating current is a A. cos wave B. tan wave C. curve D. sine wave

Last Answer : sine wave

In the case of an unsymmetrical alternating current the average value must always be taken over?

Description : In the case of an unsymmetrical alternating current the average value must always be taken over?

Last Answer : In the case of an unsymmetrical alternating current the average value must always be taken over the whole cycle.

The r.m.s. value of a sinusoidal A.C. current is equal to its value at an angle of______degrees.

Description : The r.m.s. value of a sinusoidal A.C. current is equal to its value at an angle of______degrees.

Last Answer : 45

The rms value of the current in a wire which carries a d.c. current of 10 A and a sinusoidal alternating current

Description : The rms value of the current in a wire which carries a d.c. current of 10 A and a sinusoidal alternating current of peak value 20 A is  (A) 10 A (B) 14.14 A (C) 15 A (D) 17.32 A

Last Answer : The rms value of the current in a wire which carries a d.c. current of 10 A and a sinusoidal alternating current of peak value 20 A is 17.32 A

A single phase, half-wave, controlled rectifier has 400 sin (314 t) as the input voltage and R as the load...

Description : A single phase, half-wave, controlled rectifier has 400 sin (314 t) as the input voltage and R as the load. For a firing angle of 60° for the SCR, the average output voltage is   (a) 240/π (b) 400/π (c) 300/π (d) 200/π 

Last Answer : C

The relationship between the alternating stress and mean stress is given by the following equation: σ a =σ e [1-(σ m /σ u )x], where σ e is the fatigue limit for completely reversed loading. The value of x for Gerber line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Description : The relationship between the alternating stress and mean stress is given by the following equation: σ a =σ e [1-(σ m /σ u )x], where σ e is the fatigue limit for completely reversed loading. The value of x for Gerber line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Last Answer : b) 2

The relationship between the alternating stress and mean stress is given by the following equation: σ a = σ e [1-(σ m /σ u ) x ]. The value of x for Goodman line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Description : The relationship between the alternating stress and mean stress is given by the following equation: σ a = σ e [1-(σ m /σ u ) x ]. The value of x for Goodman line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Last Answer : a) 1

What are electromagnetic waves? A. Alternating currents in the core of an electromagnet B. A wave consisting of two electric fields at right angles to each other C. A wave consisting of an electric field and a magnetic field at right angles to each other D. A wave consisting of two magnetic fields at right angles to each other

Description : What are electromagnetic waves? A. Alternating currents in the core of an electromagnet B. A wave consisting of two electric fields at right angles to each other C. A wave consisting of an electric field ... to each other D. A wave consisting of two magnetic fields at right angles to each other

Last Answer : C. A wave consisting of an electric field and a magnetic field at right angles to each other

What are electromagnetic waves? A. A wave consisting of two magnetic fields at right angles to each other B. A wave consisting of an electric field and a magnetic field at right angles to each other. C. Alternating currents in the core of an electromagnet D. A wave consisting of two electric fields at right angles to each other

Description : What are electromagnetic waves? A. A wave consisting of two magnetic fields at right angles to each other B. A wave consisting of an electric field and a magnetic field at right angles to each ... core of an electromagnet D. A wave consisting of two electric fields at right angles to each other

Last Answer : B. A wave consisting of an electric field and a magnetic field at right angles to each other.

Define rectification efficiency. Give its formula.

Description : Define rectification efficiency. Give its formula.

Last Answer : The ratio of output DC power delivered to the load to the applied input AC power is called rectification efficiency. It is denoted by η. η = Output DC power delivered to the load / Input AC power from transformer secondary η = Pdc / Pac

What is rectification ?

Description : What is rectification ?

Last Answer : : The method by which AC voltage is converted to DC voltage is called rectification.

If the purchase hook is undermasted, the purchase account is debited in rectification.

Description : If the purchase hook is undermasted, the purchase account is debited in rectification.

Last Answer : State whether the following statement are True or False with reason : If the purchase hook ... , the purchase account is debited in rectification.

For which one of the following, 'Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, 'Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : (1) Rectification Explanation: In electronics, a diode is an electronic device that allows current to flow in one direction only. It is mainly used as a rectifier diode that lets ... used for power supply operation. Rectifier diodes are used for changing alternating current into direct current.

For which one of the following, "Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, "Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : (1) Rectification Explanation: A rectifier diode is a two-lead semiconductor that allows current to pass in only one direction. Many types of diodes are used for a wide range of applications. Rectifier diodes are a vital component in power supplies

For a binary mixture with low relative volatility, continuous rectification to get pure products will require (A) Low reflux ratio (B) Less number of trays (C) Small cross-section column (D) High reflux ratio

Description : For a binary mixture with low relative volatility, continuous rectification to get pure products will require (A) Low reflux ratio (B) Less number of trays (C) Small cross-section column (D) High reflux ratio

Last Answer : (D) High reflux ratio

Deaeration (removal of O2 ) of water is done by (A) Rectification (B) Absorption (C) Ion-exchange (D) Adsorption

Description : Deaeration (removal of O2 ) of water is done by (A) Rectification (B) Absorption (C) Ion-exchange (D) Adsorption

Last Answer : (C) Ion-exchange

Mark incorrect option relating to when In correct items noticed in a sub office daily account a) Should be communic b) A similar note should be made in the sub office daily account received from SO till the adjustment is carried out.c) The daily account received from a SO should be returned for rectification of errorsd) None of these

Description : Mark incorrect option relating to when In correct items noticed in a sub office daily account a) Should be communic b) A similar note should be made in the sub office daily account received ... The daily account received from a SO should be returned for rectification of errors d) None of these

Last Answer : c) The daily account received from a SO should be returned for rectification of errors

Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Description : Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Last Answer : (d) amplification

The process of conversion of AC into DC is called (a) Amplification (b) rectification (c) purification (d)magnification

Description : The process of conversion of AC into DC is called (a) Amplification (b) rectification (c) purification (d)magnification

Last Answer : (b) rectification

For which one of the following, ‘Diodes’ are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, ‘Diodes’ are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : Rectification

A sinusoidally alternating current of frequency 60 Hz has a maximum value of 15 A. Find the value of current after 1/200 second

Description : A sinusoidally alternating current of frequency 60 Hz has a maximum value of 15 A. Find the value of current after 1/200 second

Last Answer : A sinusoidally alternating current of frequency 60 Hz has a maximum value of 15 A. Find the value of current after 1/200 second

When a megohmmeter is being used on a alternating current machine, the meter pointer will dip toward 'zero' and then gradually rise to the true resistance value if the motor insulation is _____________. A. grounded B. good C. shorted D. dirty

Description : When a megohmmeter is being used on a alternating current machine, the meter pointer will dip toward 'zero' and then gradually rise to the true resistance value if the motor insulation is _____________. A. grounded B. good C. shorted D. dirty

Last Answer : Answer: B

Alternating current measured in a transmission line will be a) Peak value b) Average value c) RMS value d) Zero

Description : Alternating current measured in a transmission line will be a) Peak value b) Average value c) RMS value d) Zero

Last Answer : c) RMS value

Alternating current (AC)

Description : Alternating current (AC)

Last Answer : AC stands for Alternating Current meaning voltage or current that changes polarity or direction respectively over time. An Alternating Current (AC) is an electric current whose magnitude ... energy are known as alternators and are simpler construction than DC electromechanical generators.

Describe the difference between direct and alternating current.

Description : Describe the difference between direct and alternating current.

Last Answer : Direct current is the flow of electricity or charge in one direction..  Alternative current is the flow of charge that doesn't flow in one direction. 

A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating

Description : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be  a. Iav=10A b. Irms=10A c. Ipeak=10A 

Last Answer : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be Irms=10A

When an alternating potential is applied to a capacitor, the current in the circuit will

Description : When an alternating potential is applied to a capacitor, the current in the circuit will  1. lead the applied potential 2. lag the applied potential 3. be in phase with the applied potential 4. none 

Last Answer : When an alternating potential is applied to a capacitor, the current in the circuit will lead the applied potential

A current is said to be alternating when it changes in : -

Description :  A current is said to be alternating when it changes in : -  a) Magnitude only b) Direction only c) Both magnitude and direction d) None

Last Answer :  Acurrent is said to be alternating when it changes in : - Both magnitude and direction

When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Description : When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Last Answer : When an alternating current passes through an ohmic resistance the electrical power converted into heat is true power.

The frequency of an alternating current is?

Description : The frequency of an alternating current is?

Last Answer : The frequency of an alternating current is the number of waves passing through a point in one second.

The reactance offered by a capacitor to alternating current of frequency 50 Hz is 20 Q....

Description : The reactance offered by a capacitor to alternating current of frequency 50 Hz is 20 Q. If frequency is increased to 100 Hz, reactance becomes_____ohms.

Last Answer : The reactance offered by a capacitor to alternating current of frequency 50 Hz is 20 Q. If frequency is increased to 100 Hz, reactance becomes 10 ohms.

Can you make alternating current through a battery?

Description : Can you make alternating current through a battery?

Last Answer : Yes, we can make AC through a battery using an inverter.

In a certain circuit current changes with time accroding to `i=2sqrt(t)`. r.m.s. value of current between `t=2` to `t=4s` will be

Description : In a certain circuit current changes with time accroding to `i=2sqrt(t)`. r.m.s. value of current between `t=2` to `t=4s` will be

Last Answer : In a certain circuit current changes with time accroding to `i=2sqrt(t)`. r.m.s. value of current between `t=2` to `t=4s` will be

3. Which sources produce alternating current? -Physics-10

Description : 3. Which sources produce alternating current? -Physics-10

Last Answer : Power plants and AC generators are some of the sources that produce alternating current.

The reactance offered by a capacitor to an alternating current of frequency 50 Hz is 10 ohm. If frequency is

Description : The reactance offered by a capacitor to an alternating current of frequency 50 Hz is 10 ohm. If frequency is increased to 100 Hz, the reactance will be (a) 2.5 ohm (b) 5.0 ohm (c) 20.0 ohm (d) 40.0 ohm 

Last Answer : Xc = 1/(2*pi*f*c) so when f is double .... Xc will be half ... Ans is 5ohm

The r.m.s. value of pure cosine function is?

Description : The r.m.s. value of pure cosine function is?

Last Answer : 0.707 of peak value

The r.m.s. value and mean value is the same in the case of?

Description : The r.m.s. value and mean value is the same in the case of?

Last Answer : The r.m.s. value and mean value is the same in the case of square wave.

The illustrated device is a _______. EL-0064 A. full wave bridge rectifier B. half wave bridge rectifier C. solid state voltage regulator D. direct current (DC) filter

Description : The illustrated device is a _______. EL-0064 A. full wave bridge rectifier B. half wave bridge rectifier C. solid state voltage regulator D. direct current (DC) filter

Last Answer : Answer: A

A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its surface perpendicularly with velocity `v_(0)=10^(6) m//s`. F

Description : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its surface perpendicularly with velocity `v_(0)=10^(6) m//s`. F

Last Answer : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its ... from the surface of the wire before it turns back.

Should I tell the story on TripAdvisor as it happened, or should I clean it up because the owner of the restaurant rectified the situation?

Description : Should I tell the story on TripAdvisor as it happened, or should I clean it up because the owner of the restaurant rectified the situation?

Last Answer : I think you should be honest and describe the entire experience. Glossing over her rude manner could lead other patrons to except that kind of behavior. Some peeps won’t stand up for themselves without someone to lead the way.

How come the moderators a so fast to moderate a question yet so slow to "unmoderate" it once rectified?

Description : How come the moderators a so fast to moderate a question yet so slow to "unmoderate" it once rectified?

Last Answer : [mod says] Because we all have other jobs that require our undivided attention. The pending questions pop up intermittently, but it isn’t like we jump, immediately, when they arrive. We get more than 300 email notices per day. Imagine getting and reading that many emails. We’re trying our best.