Velocity of water can be measured by a) Anemo meter b) Elco meter c) Current meter* d) Thermo meter

Velocity of water can be measured by
a) Anemo meter
b) Elco meter
c) Current meter*
d) Thermo meter
by

1 Answer

Answer :

c) Current meter*
by

Related questions

The wind velocity is measured using___

Description : The wind velocity is measured using___

Last Answer : Anemometer

Cross sectional area of catch water drain should not be more than a) 0 .75 square meter* b) 0. 90 square meter c) 0. 80 square meter d). 50 square meter

Description : Cross sectional area of catch water drain should not be more than a) 0 .75 square meter* b) 0. 90 square meter c) 0. 80 square meter d). 50 square meter

Last Answer : a) 0 .75 square meter*

Requirement of water for platform washing is a)5 litre per square metre per day * b)10 litre per square meter per day c) 15 litre per square metre per day d)20 litre per square metre per day

Description : Requirement of water for platform washing is a)5 litre per square metre per day * b)10 litre per square meter per day c) 15 litre per square metre per day d)20 litre per square metre per day

Last Answer : a)5 litre per square metre per day *

Which gauge is used to measure finishing tolerances . (i) Tilted gauge (ii) Filter gauge (iii) Meter gauge (iv) Filler gauge.*

Description : Which gauge is used to measure finishing tolerances . (i) Tilted gauge (ii) Filter gauge (iii) Meter gauge (iv) Filler gauge.*

Last Answer : (iv) Filler gauge.*

In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Description : In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Last Answer : (i) +0.5mm, -0 mm in vertical *

Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Description : Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Last Answer : c) 500*

Density of each compacted layer should be ascertained by taking soil samples on either side of Central Line at a) 5 meter interval b) 10 meter interval* c) 12 meter interval d) 15 meter internal

Description : Density of each compacted layer should be ascertained by taking soil samples on either side of Central Line at a) 5 meter interval b) 10 meter interval* c) 12 meter interval d) 15 meter internal

Last Answer : b) 10 meter interval*

Indication post for detonator should be provided at a distance of ---------meter and --------- meter for BG level crossing a) 400 meters in 800 meters b) 500 meters and 1200 meters c) 600 meters and 1200 meter * d)600 meters and 1000 meters

Description : Indication post for detonator should be provided at a distance of ---------meter and --------- meter for BG level crossing a) 400 meters in 800 meters b) 500 meters and 1200 meters c) 600 meters and 1200 meter * d)600 meters and 1000 meters

Last Answer : c) 600 meters and 1200 meter *

.What do you mean by 60 kg rail a. Weight of rail in 1 meter* b. Area of rail of 1 meter c. Weight of rail in 1 feet d. Volume of rail in 1 meter

Description : .What do you mean by 60 kg rail a. Weight of rail in 1 meter* b. Area of rail of 1 meter c. Weight of rail in 1 feet d. Volume of rail in 1 meter

Last Answer : a. Weight of rail in 1 meter*

what is the value of long chord for measuring unevenness in track recording a. 3.6 meter b. 9.6 meter* c. 7.2 meter d. 4.8 mete

Description : what is the value of long chord for measuring unevenness in track recording a. 3.6 meter b. 9.6 meter* c. 7.2 meter d. 4.8 mete

Last Answer : b. 9.6 meter*

Minimum radius of curve on Broad gauge a. 175 meter* b. 215 meter c. 146 meter d. 200 meter

Description : Minimum radius of curve on Broad gauge a. 175 meter* b. 215 meter c. 146 meter d. 200 meter

Last Answer : a. 175 meter*

32 kmph 11.What is the weight per meter length of 52 kg Rail? a. 54.14 kg b. 50.25 kg c. 51.89 kg* d. 53.85 kg

Description : 32 kmph 11.What is the weight per meter length of 52 kg Rail? a. 54.14 kg b. 50.25 kg c. 51.89 kg* d. 53.85 kg

Last Answer : c. 51.89 kg*

Distance between two points is measured by (a) Pacing (b) Pedometer (c) Passometer (d) Chaining (e) All the above*

Description : Distance between two points is measured by (a) Pacing (b) Pedometer (c) Passometer (d) Chaining (e) All the above*

Last Answer : (e) All the above*

Finishing tolerances are measured by? (i) On 30 cm scale (ii) 1 MT straightedge or 10 CM straightedge.* (iii) On 15 cm straight edge (iv) On 30 cm straight edge

Description : Finishing tolerances are measured by? (i) On 30 cm scale (ii) 1 MT straightedge or 10 CM straightedge.* (iii) On 15 cm straight edge (iv) On 30 cm straight edge

Last Answer : (ii) 1 MT straightedge or 10 CM straightedge.*

Specific yield of well is a) Discharge per unit time b) Yield of well per metre of drawdown* c) Velocity of water per unit time d)None of the above

Description : Specific yield of well is a) Discharge per unit time b) Yield of well per metre of drawdown* c) Velocity of water per unit time d)None of the above

Last Answer : b) Yield of well per metre of drawdown*

26. Air velocity in ducts can be measured by using and manometer a) Orifice meter b) Borden gauge c) Pitot tube d) Anemometer

Description : Air velocity in ducts can be measured by using and manometer a) Orifice meter b) Borden gauge c) Pitot tube d) Anemometer

Last Answer : Pitot tube

Indicate which of the statement is incorrect (a) The detritus tank is type of a grit chamber (b) In detritus tank, velocity of flow is further reduced (c) Grit chambers are provided in the sewage treatment process to remove the heavier inorganic matter as grit, sand etc. from the sewage (d) None of them*

Description : Indicate which of the statement is incorrect (a) The detritus tank is type of a grit chamber (b) In detritus tank, velocity of flow is further reduced (c) Grit chambers are provided in the sewage ... to remove the heavier inorganic matter as grit, sand etc. from the sewage (d) None of them*

Last Answer : (d) None of them*

For achieving self-cleaning velocity, a minimum velocity of ---- mps. Is desirable for design peak flow (a) 0.6 mps (b) 0.8 mps* (c) 1.0 mps (d) 2.0 mps

Description : For achieving self-cleaning velocity, a minimum velocity of ---- mps. Is desirable for design peak flow (a) 0.6 mps (b) 0.8 mps* (c) 1.0 mps (d) 2.0 mps

Last Answer : b) 0.8 mps*

For design of sewers for sullage, minimum velocity of ---- metres per second is taken. (a) 1.0 m sec* (b) 1.5 m/sec (c) 2.0 m/sec (d) 2.5 m/sec

Description : eFor design of sewers for sullage, minimum velocity of ---- metres per second is taken. (a) 1.0 m sec* (b) 1.5 m/sec (c) 2.0 m/sec (d) 2.5 m/sec

Last Answer : (a) 1.0 m sec*

Self cleaning velocity of a sewer line depends upon (a) Diameter of sewer (b) Gradient of ewer line (c) Type of sewerage (d) All of them*

Description : Self cleaning velocity of a sewer line depends upon (a) Diameter of sewer (b) Gradient of ewer line (c) Type of sewerage (d) All of them*

Last Answer : d) All of them*

Ultrasonic Pulse Velocity test is meant for a) Identifying the integrity of concrete* b) Finding the strength of concrete c) To know the crack in steel structure d) To know the flaw in rail

Description : Ultrasonic Pulse Velocity test is meant for a) Identifying the integrity of concrete* b) Finding the strength of concrete c) To know the crack in steel structure d) To know the flaw in rail

Last Answer : a) Identifying the integrity of concrete*

Permitted wind velocity for running of trains on the bridge a) 72 km/h* b) 58 km/h c) 64 km/h d) No limits

Description : Permitted wind velocity for running of trains on the bridge a) 72 km/h* b) 58 km/h c) 64 km/h d) No limits

Last Answer : a) 72 km/h*

In case of ‘A’ Class ODC escort is……….. (a) Necessary (b) not necessary* (c) does not matter (d) on direct current

Description : In case of ‘A’ Class ODC escort is……….. (a) Necessary (b) not necessary* (c) does not matter (d) on direct current

Last Answer : (b) not necessary*

O.D.C. Stands for (a) On direct current (b) Over dimensioned consignment* (c) None of them (d) Operating & gate

Description : O.D.C. Stands for (a) On direct current (b) Over dimensioned consignment* (c) None of them (d) Operating & gate

Last Answer : (b) Over dimensioned consignment*

The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of (A) 0.1 h and 0.9 h (B) 0.2 h and 0.8 h (C) 0.3 h and 0.7 h (D) 0.4 h and 0.6 h

Description : The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of (A) 0.1 h and 0.9 h (B) 0.2 h and 0.8 h (C) 0.3 h and 0.7 h (D) 0.4 h and 0.6 h

Last Answer : Answer: Option B

The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Description : The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Last Answer : Answer: Option B

Remote underwater thermo sensors?

Description : Remote underwater thermo sensors?

Last Answer : Max Pressure or Depth? Required Data rate? Acoustic or RF? Passive or active? Distance to receiver? Cost range? Single or multiple use? PM if you can’t answer here.

What are thermo acidophilic archae bacteria? -Biology

Description : What are thermo acidophilic archae bacteria? -Biology

Last Answer : answer:

What are thermo acidophilic archae bacteria? -Biology

Description : What are thermo acidophilic archae bacteria? -Biology

Last Answer : answer:

Where to buy Rome Thermo Me ?

Description : Where to buy Rome Thermo Me ?

Last Answer : You can buy a thermometer from any pharmacy. The price will be 20-25 rupees.

A well stoppered thermo flask containing some ice cubes is an example of

Description : A well stoppered thermo flask containing some ice cubes is an example of

Last Answer : A well stoppered thermo flask containing some ice cubes is an example of A. Closed system B. ... system C. Isolated system D. Non-thermodynamic system

Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant liquid and gas can be used to produce energy. (2) The process occurs at a temperature above 430°C at atmospheric pressure. (3) The process occurs under high pressure at temperature above 430° C. (4) It is a thermo chemical decomposition of organic waste

Description : Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant liquid ... pressure at temperature above 430° C. (4) It is a thermo chemical decomposition of organic waste

Last Answer : (2) The process occurs at a temperature above 430°C at atmospheric pressure. Explanation: Pyrolysis is a thermo-chemical decomposition of organic material at elevated temperatures in the ... . Pyrolysis generally takes place well above atmospheric pressure at temperatures exceeding above 430 °C.

Atomic explosion is triggered by - (1) thermo nuclear reaction (2) chemical reaction (3) controlled chain reaction (4) uncontrolled chain reaction

Description : Atomic explosion is triggered by - (1) thermo nuclear reaction (2) chemical reaction (3) controlled chain reaction (4) uncontrolled chain reaction

Last Answer : (4) uncontrolled chain reaction Explanation: During an uncontrolled nuclear chain reaction such as atomic explosion, a radioactive substance gives off energy at a rate that increases rapidly with time, ... its neighbors, in turn setting off other atoms; thus, producing large amounts of energy.

Which of the following principle is used to produce low-temperatures'? (1) Super conductivity (2) Joule-Kelvin effect (3) Thermo-electric effect (4) Adiabatic demagnetization

Description : Which of the following principle is used to produce low-temperatures'? (1) Super conductivity (2) Joule-Kelvin effect (3) Thermo-electric effect (4) Adiabatic demagnetization

Last Answer : (4) Adiabatic demagnetization Explanation: Magnetic refrigeration is a cooling technology based on the magnetocaloiic effect. This technique can be used to attain extremely low temperatures, as well as the ... of a suitable material is caused by exposing the material to a changing magnetic field.

Why does a liquid remain hot or cold for a long time inside a thermo flask?

Description : Why does a liquid remain hot or cold for a long time inside a thermo flask?

Last Answer : Ans: Because of the presence of air, which is poor conductor of heat, in between the double glass walls of a thermos flask.

Paper like thin plastic articles can be produced by (A) Blow moulding (B) Vacuum thermo forming (C) Injection moulding (D) None of these

Description : Paper like thin plastic articles can be produced by (A) Blow moulding (B) Vacuum thermo forming (C) Injection moulding (D) None of these

Last Answer : (B) Vacuum thermo forming

Distinguish between thermoplastic and thermo setting polymers.

Description : Distinguish between thermoplastic and thermo setting polymers.

Last Answer : Thermo plastic polymer Thermo setting plastic  1. The inter moliculer forces are intermediate.  1. The inter molecular force are ... 3. Eg. Polythene and polystyrene  3. Eg. Bakelite

Differentiate between thermo plastic and thermo setting Plastic.

Description : Differentiate between thermo plastic and thermo setting Plastic.

Last Answer : Thermo Plastic Polymer Thermo setting Polymer  1. Liner or slightly branched long change molecules 1. Cross linked or ... . Ex. Polythene, Polystyrene  3. Ex. Bakelite, Urea-Formal dehyde resins

Which of the following crops is thermo-insensitive? (A) Sunflower (B) Wheat (C) Rice (D) Jowar

Description : Which of the following crops is thermo-insensitive? (A) Sunflower (B) Wheat (C) Rice (D) Jowar

Last Answer : (A) Sunflower

Evaporation by thermo compression results in the (A) Saving of steam (B) Realisation of multiple effect economy in a single effect (C) Both (A) and (B) (D) None of these

Description : Evaporation by thermo compression results in the (A) Saving of steam (B) Realisation of multiple effect economy in a single effect (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

If a tree flowers thrice in a year (Oct, Jan and July) in Northern India, it is said to be (a) photo and thermo-insensitive (b) photo and thermo-sensitive (c) photosensitive but thermo-insensitive (d) thermosensitive but photo-insensitive

Description : If a tree flowers thrice in a year (Oct, Jan and July) in Northern India, it is said to be (a) photo and thermo-insensitive (b) photo and thermo-sensitive (c) photosensitive but thermo-insensitive (d) thermosensitive but photo-insensitive

Last Answer : (a) photo and thermo-insensitive

Marble is —rock a. Hydro metamorphic b. Dynamo metamorphic c. Thermo metamorphic d. Acidic

Description : Marble is —rock a. Hydro metamorphic b. Dynamo metamorphic c. Thermo metamorphic d. Acidic

Last Answer : c. Thermo metamorphic

Why Thermo Wells Are Used? What Materials Are Used In Thermo Wells?

Description : Why Thermo Wells Are Used? What Materials Are Used In Thermo Wells?

Last Answer : In numerous applications, it is neither desirable nor practical to expose a temperature sensor directly to a material. Wells are therefore used to protect against damage corresion, arosion, aborsion ... . Materials used in thermo wells: Stainless steel, Inconel, Monel, Alloy Steel, Hastelloy

Why Thermowells Are Used? What Materials Are Used In Thermo Wells?

Description : Why Thermowells Are Used? What Materials Are Used In Thermo Wells?

Last Answer : In numerous applications, it is neither desirable nor practical to expose a temperature sensor directly to a material. Wells are therefore used to protect against damage corrosion, arosion, ... operations. Materials used in thermowells: Stainless steel, Inconel, Monel, Alloy Steel, Hastelloy

Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating process (C) The plastic articles made by placing raw material in the desired moulds, is known as moulding process (D) All the above

Description : Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating ... placing raw material in the desired moulds, is known as moulding process (D) All the above

Last Answer : Answer: Option D

Thermo-compressor is commonly used for a) compressing hot air b) flash steam recovery c) distillation d) reverse compression of CO2

Description : Thermo-compressor is commonly used for a) compressing hot air b) flash steam recovery c) distillation d) reverse compression of CO2

Last Answer : flash steam recovery

Recovery of waste heat from hot fluid to fluid is called: a) thermo compressor b) waste heat recovery boiler c) heat Pump d) economizer

Description : Recovery of waste heat from hot fluid to fluid is called: a) thermo compressor b) waste heat recovery boiler c) heat Pump d) economizer

Last Answer : heat Pump

Heat that cause change in phase without a change in temperature.  a) Sensible Heat  b) Latent Heat  c) Thermo Heat  d) None of the above

Description : Heat that cause change in phase without a change in temperature.  a) Sensible Heat  b) Latent Heat  c) Thermo Heat  d) None of the above

Last Answer : Latent Heat

Heat that cause change in temperature at without a change in phase.  a) Sensible Heat  b) Latent Heat  c) Thermo Heat  d) None of the above

Description : Heat that cause change in temperature at without a change in phase.  a) Sensible Heat  b) Latent Heat  c) Thermo Heat  d) None of the above

Last Answer : Sensible Heat