In case of ‘A’ Class ODC escort is……….. (a) Necessary (b) not necessary* (c) does not matter (d) on direct current

In case of ‘A’ Class ODC escort is………..
(a) Necessary  
 (b) not necessary*
(c) does not matter  
 (d) on direct current
by

1 Answer

Answer :

(b) not necessary*
by

Related questions

For A class ODC, the gross clearance over maximum moving dimension of B.G is (a) 150mm (b) 175mm (c) 225 mm* (d) (d) 250mm

Description : For A class ODC, the gross clearance over maximum moving dimension of B.G is (a) 150mm (b) 175mm (c) 225 mm* (d) (d) 250mm

Last Answer : (c) 225 mm*

O.D.C. Stands for (a) On direct current (b) Over dimensioned consignment* (c) None of them (d) Operating & gate

Description : O.D.C. Stands for (a) On direct current (b) Over dimensioned consignment* (c) None of them (d) Operating & gate

Last Answer : (b) Over dimensioned consignment*

For ‘B’ category stations as per minimum essential facility it is necessary to provide (a) High level platform (b) Medium level platform* (c) Rail level platform (d) All the above

Description : For ‘B’ category stations as per minimum essential facility it is necessary to provide (a) High level platform (b) Medium level platform* (c) Rail level platform (d) All the above

Last Answer : (b) Medium level platform*

For ‘A’ category stations it is necessary to provide (a) High level platform* (b) Medium level platform (c) Rail level platform (d) All the above

Description : For ‘A’ category stations it is necessary to provide (a) High level platform* (b) Medium level platform (c) Rail level platform (d) All the above

Last Answer : (a) High level platform*

What is the speed restriction to be observed for train passing? (i) Necessary speed restriction shall be observed until the grinding operation is over.* (ii) 30KMPH (iii) 45 KMPH (iv) Not required

Description : What is the speed restriction to be observed for train passing? (i) Necessary speed restriction shall be observed until the grinding operation is over.* (ii) 30KMPH (iii) 45 KMPH (iv) Not required

Last Answer : (i) Necessary speed restriction shall be observed until the grinding operation is over.*

AA saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

Description : A saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

Last Answer : d) Unconfined compression*

Biochemical Oxygen Demand (BOD) of sewage is the (a) Oxygen required to oxidise (b) Oxygen required to oxidise biologically inactive organic matter* (c) a and b both (d) none of these

Description : Biochemical Oxygen Demand (BOD) of sewage is the (a) Oxygen required to oxidise (b) Oxygen required to oxidise biologically inactive organic matter* (c) a and b both (d) none of these

Last Answer : (b) Oxygen required to oxidise biologically inactive organic matter*

Indicate which of the statement is incorrect (a) The detritus tank is type of a grit chamber (b) In detritus tank, velocity of flow is further reduced (c) Grit chambers are provided in the sewage treatment process to remove the heavier inorganic matter as grit, sand etc. from the sewage (d) None of them*

Description : Indicate which of the statement is incorrect (a) The detritus tank is type of a grit chamber (b) In detritus tank, velocity of flow is further reduced (c) Grit chambers are provided in the sewage ... to remove the heavier inorganic matter as grit, sand etc. from the sewage (d) None of them*

Last Answer : (d) None of them*

Black cotton soils are a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering* b) Compacted and laminated clays c) Soils containing carbon of coal underneath d) Dark brown earthy materials formed due to partial or complete decomposition of vegetable matter

Description : Black cotton soils are a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering* b) Compacted and ... underneath d) Dark brown earthy materials formed due to partial or complete decomposition of vegetable matter

Last Answer : a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering*

What good would a fighter jet escort for this commercial airliner do?

Description : What good would a fighter jet escort for this commercial airliner do?

Last Answer : Publicity, putting the fear of God into anyone else who might behave the same way in the future, and an excuse to slap the idiots with the biggest fine they can possibly imagine.

I used to be an escort, how can I tell my boyfriend this? I'm not escorting anymore.

Description : I used to be an escort, how can I tell my boyfriend this? I'm not escorting anymore.

Last Answer : It’s been very very hard keeping this from him. I’ve felt like I’ve been living a double life for such a long time. I kept this a secret from family and friends. I don’t want to lie or hide anymore. I want him to know the real me, and everything I’ve been through.

Which of the following words don't belong in the group and why? CORSET, COSTER, SECTOR, ESCORT, COURTS -Riddles

Description : Which of the following words don't belong in the group and why? CORSET, COSTER, SECTOR, ESCORT, COURTS -Riddles

Last Answer : Courts. All of the others are anagrams of each other.

Is the Escort ZR3 Laser Shifter an active jammer or passive jammer, or something different?

Description : Is the Escort ZR3 Laser Shifter an active jammer or passive jammer, or something different?

Last Answer : The Escort ZR3 laser shifter is neither an active or passive jammer. It "phase shifts" the laser to it has trouble bouncing back. Detectors can't tell how far away a laser trap is, so they phase shift the laser instead.

________are employed in each division for the supervision of the runner’s lines, the work of village postmen or postmen serving in villages, and when prescribed by the_______, for the conveyance or escort of_______, from one office to another a) Head postman , head of the Circle, cash remittances b) Overseers , Supdt of post office, cash remittances c) Overseers , head of the Circle, cash remittances d) None of these

Description : ________are employed in each division for the supervision of the runner's lines, the work of village postmen or postmen serving in villages, and when prescribed by the_______, for the conveyance or ... office, cash remittances c) Overseers , head of the Circle, cash remittances d) None of these

Last Answer : c) Overseers , head of the Circle, cash remittances

Both noting and protest are compulsory in case of A. Foreign Bills B. Inland Bills C. Foreign as well as Inland Bills D. None of them

Description : Both noting and protest are compulsory in case of A. Foreign Bills B. Inland Bills C. Foreign as well as Inland Bills D. None of them

Last Answer : C. Foreign as well as Inland Bills

In case of emergency, land can be acquired urgently by operation of special section (a) Section 4 & 6 (b) Section 9 & 17* (c) Section 8 & 10 (d) None of them

Description : In case of emergency, land can be acquired urgently by operation of special section (a) Section 4 & 6 (b) Section 9 & 17* (c) Section 8 & 10 (d) None of them

Last Answer : (b) Section 9 & 17*

In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B

Description : In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B

Last Answer : (a ) L = 3 B*

In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Description : In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Last Answer : a) 5 centimeter*

In case of a curved track on electrified, double line, BG section a) Duty hut cannot be provided for a level crossing. b) Duty hut should be on the inside of the curve. c) Duty hut should be on the outside of the curve.* d) Duty hut can be provided on any side of the curve.

Description : In case of a curved track on electrified, double line, BG section a) Duty hut cannot be provided for a level crossing. b) Duty hut should be on the inside of the curve. c) Duty hut should be on the outside of the curve.* d) Duty hut can be provided on any side of the curve.

Last Answer : c) Duty hut should be on the outside of the curve.*

In case of Shot Welded Rails the fish plated joint should be avoided on Level Crossings within a distance of --------- from end of level crossing a) 3 meters b) 4 meters c) 5 meters d) 6 meters*

Description : In case of Shot Welded Rails the fish plated joint should be avoided on Level Crossings within a distance of --------- from end of level crossing a) 3 meters b) 4 meters c) 5 meters d) 6 meters*

Last Answer : d) 6 meters*

In case of bridge is distressed category I then special restriction of___hall be imposed

Description : In case of bridge is distressed category I then special restriction of___hall be imposed

Last Answer : 15 kmph

In case of distressed bridge category II, ADEN shall inspect the bridge

Description : In case of distressed bridge category II, ADEN shall inspect the bridge

Last Answer : once in 6 months

In case of underwater independency diver will be employed in depth beyond___ should be medically checked

Description : In case of underwater independency diver will be employed in depth beyond___ should be medically checked

Last Answer : 10 m

bridge foundation having less then 2M depth below bed level in case of arch bridges and 1.2M depth below bed level in case of other bridges is termed as

Description : bridge foundation having less then 2M depth below bed level in case of arch bridges and 1.2M depth below bed level in case of other bridges is termed as

Last Answer : …Shallow foundation..

In case of LWR track, full ballast section as specified in LWR Manual should be provided up to ……….. from the bridge abutment. a) 200 m b) 50 m c) 300 m d) 100 m*

Description : In case of LWR track, full ballast section as specified in LWR Manual should be provided up to ……….. from the bridge abutment. a) 200 m b) 50 m c) 300 m d) 100 m*

Last Answer : d) 100 m

Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Description : Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Last Answer : d) all the above*

In case of water crossing danger level in bridges a) speed restriction be imposed b) traffic be suspended till water recedes c) traffic be suspended till a responsible person inspects the site and declares it safe for running traffic* d) bridge watchman is to be posted

Description : In case of water crossing danger level in bridges a) speed restriction be imposed b) traffic be suspended till water recedes c) traffic be suspended till a responsible person inspects the site and declares it safe for running traffic* d) bridge watchman is to be posted

Last Answer : c) traffic be suspended till a responsible person inspects the site and declares it safe for running traffic*

Min. sleeper density in case of semi permanent diversion- (a) (m + 2) (b) (m + 3)* (c) (m + 4) (d) ( m + 7 )

Description : Min. sleeper density in case of semi permanent diversion- (a) (m + 2) (b) (m + 3)* (c) (m + 4) (d) ( m + 7 )

Last Answer : (b) (m + 3)*

“B” class station is provided only on (a) Single lines (b) Double line (c) On both single as well as double line* (d) None of them

Description : “B” class station is provided only on (a) Single lines (b) Double line (c) On both single as well as double line* (d) None of them

Last Answer : c) On both single as well as double line*

Foot over bridge must be provided on the following type of stations as per minimum essential facility criteria (a) A, B, C, & D class station (b) A,B & C class station* (c) A, & B class station (d) Only A class station

Description : Foot over bridge must be provided on the following type of stations as per minimum essential facility criteria (a) A, B, C, & D class station (b) A,B & C class station* (c) A, & B class station (d) Only A class station

Last Answer : b) A,B & C class station*

If first class Brick is immersed in water for 24 hours it should not absorb water by weight more than a) 10% b) 15% c) 20% * d) 25%

Description : If first class Brick is immersed in water for 24 hours it should not absorb water by weight more than a) 10% b) 15% c) 20% * d) 25%

Last Answer : c) 20% *

he minimum compressive strength of first class brick should be a) 75 kg per centimeter square b) 90 kg per centimeter square c) 100 kg per centimeter square* d) 120 kg per centimeter square

Description : he minimum compressive strength of first class brick should be a) 75 kg per centimeter square b) 90 kg per centimeter square c) 100 kg per centimeter square* d) 120 kg per centimeter square

Last Answer : c) 100 kg per centimeter square*

Level crossing is classified on the basis of a) Class of road b) TVU* c) Volume of road traffic d) Volume of rail traffic

Description : Level crossing is classified on the basis of a) Class of road b) TVU* c) Volume of road traffic d) Volume of rail traffic

Last Answer : b) TVU*

For A Class, the gross clearance of over maximum moving dimension for BG is (a) 100mm (b) 125mm (c) 150mm* (d) 175mm

Description : For A Class, the gross clearance of over maximum moving dimension for BG is (a) 100mm (b) 125mm (c) 150mm* (d) 175mm

Last Answer : (c) 150mm*

As per new classification of railway accident, floods breaches & land slides’ is classified in the following class (a) Class J (b) Class K (c) Class Q (d) Class R*

Description : As per new classification of railway accident, floods breaches & land slides’ is classified in the following class (a) Class J (b) Class K (c) Class Q (d) Class R*

Last Answer : (d) Class R*

Collision as per new classification is classified as (a) A class* (b) B class (C) C class (d) none of these

Description : Collision as per new classification is classified as (a) A class* (b) B class (C) C class (d) none of these

Last Answer : (a) A class*

Velocity of water can be measured by a) Anemo meter b) Elco meter c) Current meter* d) Thermo meter

Description : Velocity of water can be measured by a) Anemo meter b) Elco meter c) Current meter* d) Thermo meter

Last Answer : c) Current meter*

Mark the correct option a) Indents prepared by first class postmasters do not require countersignature and should be forwarded direct to the Depot b) In the case of a mail line, the indent should be forwarded by the postmaster of the principal terminal office, whether it is a first class head office or not, to the Superintendent in charge of the line for countersignature c) Both the A and B d) None of these

Description : Mark the correct option a) Indents prepared by first class postmasters do not require countersignature and should be forwarded direct to the Depot b) In the case of a mail line, the indent should be ... Superintendent in charge of the line for countersignature c) Both the A and B d) None of these

Last Answer : c) Both the A and B

Class 9th CBSE Chemistry CBQ'S (Case Base Study) Is matter around us Pure? -Science

Description : Class 9th CBSE Chemistry CBQ'S (Case Base Study) Is matter around us Pure? -Science

Last Answer : 1.The liquid air has three components X, Y and Z whose boiling points are:- 186oC, -183oC and -196oC, respectively. When liquid air is fed into a tall fractional distillation column from near its bottom and warmed up slowly : ( ... ------------------------------ More questions to be added shortly...

What is the most important requirement for the people of a flood hit area?

Description : What is the most important requirement for the people of a flood hit area?

Last Answer : Inoculation against cholera

If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous

Description : If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous

Last Answer : (c) Isotropic

Power tillers are popularly available in hp range of q. 6-12 hp r. 12-20 hp s. 1-6 hp t. 20-50 hp

Description : Power tillers are popularly available in hp range of q. 6-12 hp r. 12-20 hp s. 1-6 hp t. 20-50 hp

Last Answer : q. 6-12 hp

The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Description : The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Last Answer : d) Belt pulleys and chain sprocket

The upper safe noise level for machine operator is : a. 85db b. 100db c. 110db d. 115db

Description : The upper safe noise level for machine operator is : a. 85db b. 100db c. 110db d. 115db

Last Answer : a. 85db

The average threshing outrun of a paddy in kg/hr is (A) 500 (B)650 (C)800 (D)1000

Description : The average threshing outrun of a paddy in kg/hr is (A) 500 (B)650 (C)800 (D)1000

Last Answer : (B)650

In a precision planter the height of seed drop: A. Should be as close to be ground level as is possible. B. Should be at least 1 m from the ground level. C. Is not a factor to be considered? D. None of These

Description : In a precision planter the height of seed drop: A. Should be as close to be ground level as is possible. B. Should be at least 1 m from the ground level. C. Is not a factor to be considered? D. None of These

Last Answer : A. Should be as close to be ground level as is possible.

ate of wear chain drive system a) Directly related to speed of chain b) Inversely related to size of sprocket of chain length c) Both (a) and (b) d) None of the above

Description : ate of wear chain drive system a) Directly related to speed of chain b) Inversely related to size of sprocket of chain length c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Description : Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Last Answer : a) Rate of wear

Formula for average service life of belt at a given speed is a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100 b) Life(hrs)=[Total fatique rates / Belt length (mm)]*100 c) Life(hrs)=[Belt length (m)/ Total fatique rates]*100 d) None of the above

Description : Formula for average service life of belt at a given speed is a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100 b) Life(hrs)=[Total fatique rates / Belt length (mm)]*100 c) Life(hrs)=[Belt length (m)/ Total fatique rates]*100 d) None of the above

Last Answer : a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100

which stage represents optimum conditions for tillage a) Sticky b) Plastic c) Friable ( crumbly ). d) Hard ( cemented )

Description : which stage represents optimum conditions for tillage a) Sticky b) Plastic c) Friable ( crumbly ). d) Hard ( cemented )

Last Answer : c) Friable ( crumbly