Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550
Last Answer : Answer: Option C
Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500
Last Answer : Answer: Option D
Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300
Last Answer : (C) 350-400
Description : The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm
Last Answer : (C) 500 mm
Description : Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm
Last Answer : Answer: Option B
Description : Indication post for detonator should be provided at a distance of ---------meter and --------- meter for BG level crossing a) 400 meters in 800 meters b) 500 meters and 1200 meters c) 600 meters and 1200 meter * d)600 meters and 1000 meters
Last Answer : c) 600 meters and 1200 meter *
Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above
Last Answer : Option D
Description : What is the clear distance between two consecutive steel channel sleepers on Girder bridges? (a) 450 mm* (b) 510 mm (c) 500 mm (d) 460 mm
Last Answer : (a) 450 mm*
Description : What is the clear distance between two consecutive bridge Timbers or Girder bridge? (a) 450 mm (b) 510 mm* (c) 500 mm (d) 520 mm
Last Answer : (b) 510 mm*
Description : n Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 12.20 < 30.5 m a) 300 mm b) 600 mm* c) 500 mm d) 450 mm
Last Answer : b) 600 mm*
Description : In Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 6.10 < 12.2 m a) 300 mm b) 600 mm c) 450 mm* d) 500 mm
Last Answer : c) 450 mm*
Description : Clear distance between consecutive sleepers not to exceed on bridges in BG is a) 450 mm* b) 600 mm c) 510 mm d) 500 mm
Last Answer : a) 450 mm*
Description : In cement pressure grouting holes should be drilled at spacing in both direction at a) 150 – 500 mm b) 450 mm c) 500 – 750 mm* d) 1000 mm
Last Answer : c) 500 – 750 mm*
Description : What is Pre Heating Temperature of rail ends in AT Welding? (i) 300 ± 20oC (ii) 400 ± 20oC (iii) 500 ± 20oC (iv) 600 ± 20oC *
Last Answer : (iv) 600 ± 20oC *
Description : On Broad gauge tracks whistle indicator shall be provided at a distance of ---------- from level crossing along the track a) 400 meters b) 600 meters* c) 350 meters d) 500 meters
Last Answer : b) 600 meters*
Description : For protection of level crossing gate in an emergency on BG double line the Gateman should place one detonator at one place and 3 detonators at a subsequent place at a distance of ------- a) and------ ... c) 500 meters and 1000 meters d) 600 meters and 1200 meters* e) 800 meters in 1500 meters
Last Answer : d) 600 meters and 1200 meters*
Description : With regard to standard of quality of drinking water as laid down by Indian Railway , the requirement (desirable) limit of total dissolved solids should not be more than---------- mg/l a)200 b) 300 c) 400
Last Answer : d) 500*
Description : The maximum gradient in station yards should be ……. Unless special safely devices are adopted and/or special rules enforced. (a) 1 in 400* (B) 1 in 500 (c) 1 in 1000 (D) 1 In 600
Last Answer : (a) 1 in 400*
Description : 74 Total iron ore reserves in Pakistan are _______ A. 400 million tonnes B. 500 million tonnes C. 550 million tonnes D. 590 million tonnes
Last Answer : ANSWER: B
Description : Total iron ore reserves in Pakistan are _______ A. 400 million tonnes B. 500 million tonnes C. 550 million tonnes D. 590 million tonnes
Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm
Last Answer : a)400-550 rpm
Description : Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm
Last Answer : a) 400 – 550 rpm
Description : The monthly incomes of A and B are in the ratio 4:5, their expenses are in the ratio 5 : 6. If 'A' saves Rs.25 per month and 'B' saves Rs.50 per month, what are their respective incomes? A) Rs.400 and Rs.500 B) Rs.240 and Rs.300 C) Rs.320 and Rs.400 D) Rs.440 and Rs.550 E) NONE
Last Answer : Answer: A Let AA's income be = 4x AA's expenses, therefore = 4x–25 Let BB's income be = 5x BB's expenses, therefore = 5x–50 We know that the ratio of their expenses = 5:6 ⇒24x−150=25x−250 ⇒ Therefore, x=100 A's income =4x=400 and B's income =5x=500
Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550
Last Answer : (A) wQH/15
Description : Cement pressure grouting is suitable for a) Very fine crack b) weathered concrete c) Active crack where cause of crack is known and remedial action has been taken* d) Crushed masonry
Last Answer : c) Active crack where cause of crack is known and remedial action has been taken
Description : Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*
Last Answer : d) all the above*
Description : As per the Constitution of India, what is the limit prescribed for the number of members in the Legislative Assembly of a State? (1) 350 members (2) 400 members (3) 450 members (4) 500 members
Last Answer : (4) 500 members Explanation: The number of members ranges between 60 and 500.
Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th
Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400
Description : Is 450 closer to 400 or 500?
Last Answer : Technically, it's closer to neither, but as a rule of rounding, if it's halfway, you round up, so you would round it to 500.
Description : A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data
Last Answer : A. 461.62 N
Description : Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm
Last Answer : (b) 400-600 mm
Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the ... the water horse power of the pump is (A) 400 (B) 450 (C) 500 (D) 600
Last Answer : (D) 600
Description : The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500
Last Answer : (C) Rs. 450
Description : What is the range of the visible light cure beam: A. 100-120 nm B. 200-300 nm C. 400-430 nm D. 470 nm or 450-500 nm
Last Answer : D. 470 nm or 450-500 nm
Description : Tandem rig test with 450 probe for AT weld detects. (i) Horizontal longitudinal defect in weld. (ii) Vertical oriented defect in AT weld.* (iii) Transverse defect in AT weld. (iv) Defect in flange of AT welds.
Last Answer : (ii) Vertical oriented defect in AT weld.*
Description : 450 probe is used for detecting defect in; (i) FB weld (ii) AT weld (iii) FB weld, AT weld & SEJ (iv) All above*
Last Answer : (iv) All above*
Description : The standard size of masonry bricks, is (A) 18 cm × 8 cm × 8 cm (B) 19 cm × 9 cm × 9 cm (C) 20 cm × 10 cm × 10 cm (D) 21 cm × 11 cm × 11 cm
Description : What is the electric field intensity at a distance of 20cm from a charge 2 X 10 -6 C in vacuum? a) 250,000 b) 350,000 c) 450,000 d) 550,000
Last Answer : c) 450,000
Description : The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850
Last Answer : (B) 350 to 450
Description : In tractor transmission oil and oil from the steering worm and sector housing should be changed after how many working hours? 1.450 2. 550 3. 650 4. 750
Last Answer : ans 4
Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3
Last Answer : [ C ] 450 kg/m3
Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3
Last Answer : [ B ] 300 kg/m3
Description : Side face reinforcement is provided when the depth of beam exceeds [ A ] 250 mm [ B ] 450 mm [ C ] 550 mm [ D ] 750 mm
Last Answer : [ D ] 750 mm
Description : The labelled price of a product is Rs 750. If it is sold at a 20% discount, the dealer earns a 25% profit. What is the cost price? 1. Rs 550 2. Rs 450 3. Rs 435 4. Rs 480
Last Answer : 1. Rs 550
Description : The volume of a bag of cement in cubic meters is about a) 0.035* b) 0.35 c) 0.53 d) .053
Last Answer : a) 0.035*
Description : Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia
Last Answer : a) Alumina*
Description : Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia
Last Answer : b) Silica*