In measurement system, which of the following static characteristics is desirable ?

 In measurement system, which of the following static characteristics is desirable ? a) accuracy b) sensitivity c) reproducibility d) all the above
by

2 Answers

Answer :

 In measurement system, which of the following static characteristics is desirable ? a) accuracy b) sensitivity c) reproducibility d) all the above

by

Answer :

d) all of the above
by

Related questions

The desirable characteristics of a signal source are : -

Description : The desirable characteristics of a signal source are : - a) the frequency of the signal should be well known and stable b) the amplitude of the signal source should be controllable from very small to relatively large value c) The output signal should be free from distortion d) all the above

Last Answer : The desirable characteristics of a signal source are : - a) the frequency of the signal should be well known and stable b) the amplitude of the signal source should be controllable from very small to relatively large value c) The output signal should be free from distortion d) all the above

The desirable static characteristics of a measuring system are?

Last Answer : The desirable static characteristics of a measuring system are accuracy, sensitivity and reproducibility.

Maxwell's inductance - capacitance bridge is used for measurement of Inductance of: -

Description :  Maxwell's inductance - capacitance bridge is used for measurement of Inductance of: -  a) Low Q coils b) Medium Q coils c) High Q coils d) Low and medium Q coils

Last Answer : A

Q2. What are the desirable agronomic characteristics for crop improvement? -Science

Description : Q2. What are the desirable agronomic characteristics for crop improvement? -Science

Last Answer : The essential agronomic features required for crop improvement are: Profuse branching along with tallness in any fodder crop Dwarfness in any cereals

The development of desirable person's characteristics is largely a matter of Options: A) Social pressures B) Habit-formation C) Motivation D) Opportunity for learning

Description : The development of desirable person's characteristics is largely a matter of Options: A) Social pressures B) Habit-formation C) Motivation D) Opportunity for learning

Last Answer : C) Motivation

State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Description : State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Last Answer : Desirable characteristics of ideal traction motors:-  A) Mechanical Properties or characteristics: 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP ... AC series motor 3. 3-Ph, Slip-ring induction motor 4. Linear induction motor (LIM)

Write eight desirable characteristics of traction motor.

Description : Write eight desirable characteristics of traction motor.

Last Answer : Desirable characteristics of ideal traction motors:- 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP should be minimum in order to increase pay ... maintenance cost. 17) It should have high efficiency. 18) It should have long life.

State and explain the desirable characteristics of a Tariff.

Description : State and explain the desirable characteristics of a Tariff. 

Last Answer : The desirable characteristics of a Tariff: 1. It should be easy to understand to consumer. 2. Easy to calculate. 3. Tariff should be attractive i.e. It should not be too high or ... industrial consumer, in addition to basic tariff incentives and penalty related to PF and LF should be considered.

What are the desirable characteristics of ideal switch?

Description : What are the desirable characteristics of ideal switch?

Last Answer : Desirable characteristics of the ideal switch: It is desirable to have power switches characteristics closer to ideal switch. The ideal switch should have the following characteristics. Zero resistance when ... . 100% efficiency. Able to control power flow with zero power dissipation.

Explain Static Error and Dynamic Error in measurement systems.

Description : Explain Static Error and Dynamic Error in measurement systems.

Last Answer : Definition of static error and dynamic error  Static error: It is the difference between the true value of a quantity not changing with time and the value indicated by the instrument  Dynamic ... changing with time and the value indicated by the instrument if no static error is assumed.

Pick up the correct statement from the following: (A) Topology describes the geometric characteristic of objects which do not change under transformations and are independent of any coordinate system (B) Topological characteristics of an object are independent of scale measurement (C) The three elements of topology are adjacency, containment, and connectivity (D) All of these

Description : Pick up the correct statement from the following: (A) Topology describes the geometric characteristic of objects which do not change under transformations and are independent of any coordinate system ... The three elements of topology are adjacency, containment, and connectivity (D) All of these

Last Answer : Answer: Option D

Draw V-I characteristics of p-n junction diode? Define static and dynamic resistance of diode.

Description : Draw V-I characteristics of p-n junction diode? Define static and dynamic resistance of diode.

Last Answer : Static Resistance: The resistance offered by a p-n junction diode when it is connected to a DC circuit is called static resistance.  (OR) It is the ratio of DC voltage applied across diode ... The dynamic resistance of a diode is the ratio of change in voltage to the change in current. 

List characteristics of static data member and static member function.

Description : List characteristics of static data member and static member function.

Last Answer : Characteristics of static member variable are: i) It is initialized to zero when the first object of its class is created. No other initialization is permitted. ii) Only one copy of that ... the class name with a scope resolution operator instead of object name as follows: class_name::function_name;

Define the static characteristics: i) Resolution ii) Drift.

Description : Define the static characteristics: i) Resolution ii) Drift.

Last Answer : i) Resolution: It is the smallest increment in the input which can be detected by the instrument or the smallest measurable input change.  ii) Drift: The gradual shift in the indication or record of ... of time, during which the true value of the variable does not change is referred to as drift. 

State the static and dynamic characteristics of instruments.

Description : State the static and dynamic characteristics of instruments. 

Last Answer : Static characteristics: i. Accuracy ii. Sensitivity iii. Reproducibility iv. Drift v.Static error vi. Dead zone vii. Repeatability viii. Precision ix Linearity  Dynamic characteristics: i. Speed of response ii. Measuring lag iii. Fidelity iv. Dynamic error

In a static over-current relay, inverse time characteristics are obtained by

Description : In a static over-current relay, inverse time characteristics are obtained by   (a) A differentiating circuit (b) An integrating circuit (c) A transistor amplifier (d) A transistor switch

Last Answer : B

What is the reliable measurement for comparing amplifier noise characteristics? A. Thermal agitation noise B. Noise factor C. Noise margin D. Signal-to-noise

Description : What is the reliable measurement for comparing amplifier noise characteristics? A. Thermal agitation noise B. Noise factor C. Noise margin D. Signal-to-noise

Last Answer : B. Noise factor

In study design threats, If Subjects’ behavior may be affected by characteristics of the researchers is known as: a. Measurement effect b. Experimenter effect c. Novelty effect d. Expectancy effect

Description : In study design threats, If Subjects’ behavior may be affected by characteristics of the researchers is known as: a. Measurement effect b. Experimenter effect c. Novelty effect d. Expectancy effect

Last Answer : b. Experimenter effect

Most of the outcome/dependent variable characteristics and attributes measured on educational characteristics probably exist at the ______________ level of measurement. a. Nominal b. Ordinal c. Interval d. Ratio

Description : Most of the outcome/dependent variable characteristics and attributes measured on educational characteristics probably exist at the ______________ level of measurement. a. Nominal b. Ordinal c. Interval d. Ratio

Last Answer : b. Ordinal

Base 10 refers to which number system?

Description : Base 10 refers to which number system? a) binary coded decimal b) decimal c) octal d) hexadecimal

Last Answer : Base 10 refers to decimal number system.

The base unit in SI system are -

Description :  The base unit in SI system are - a) Metre, Kilogram, Second b) Metre, Kilogram, Second, Ampere c) Metre, Kilogram, Second, Ampere, Kelvin, Candela, Mole d) Metre, Kilogram, Second, Ampere, Kelvin, Candela

Last Answer :  The base unit in SI system are -  Metre, Kilogram, Second, Ampere, Kelvin, Candela, Mole 

The error detecting element in a control system gives: -

Description : The error detecting element in a control system gives: - a) the sum of the reference signal and feedback signal b) the sum of the reference signal and error signal c) the difference of the reference signal and feedback signal d) the difference of the reference signal and output signal

Last Answer : The error detecting element in a control system gives: - the difference of the reference signal and feedback signal

In the time response analysis of control system, Damping Ratio is given by -

Description : In the time response analysis of control system, Damping Ratio is given by - a) Actual damping / Critical damping b) Critical damping /Actual damping c) ( Sum of the Actual damping and critical damping) /Actual damping d)( Difference of the Actual damping and critical damping) / critical damping

Last Answer : In the time response analysis of control system, Damping Ratio is given by -  Actual damping / Critical damping

Data Acquisition system are used to measure and record analog signal in different ways i.e. : -

Description : Data Acquisition system are used to measure and record analog signal in different ways i.e. : -  a) Signals which originates from direct measurement of electrical quantities b) Signals which originate from the ... which oscillates in simple harmonic motion and dies out slowly. d) Both (a) and (b)

Last Answer : Data Acquisition system are used to measure and record analog signal in different ways i.e. : - d) Both (a) and (b) Signals which originates from direct measurement of electrical quantities and Signals which originate from the use of transducer. 

Why is power-sharing desirable in a democracy or any other system of government? -SST 10th

Description : Why is power-sharing desirable in a democracy or any other system of government? -SST 10th

Last Answer : (a) Power-sharing helps to reduce the possibiltiy of conflict between social groups. (b) It is a good way to ensure the stability of political order and unity of the nation. (c) A legitimate government is one where citizens through participation acquire a stake in the system.

Which is not a desirable property of a logical rule-based system? a) Locality b) Attachment

Description : Which is not a desirable property of a logical rule-based system? a) Locality b) Attachment

Last Answer : b) Attachment

Which is not a desirable property of a logical rule-based system? a) Locality b) Attachment c) Detachment d) Truth-Functionality e) Global attribute

Description : Which is not a desirable property of a logical rule-based system? a) Locality b) Attachment c) Detachment d) Truth-Functionality e) Global attribute

Last Answer : b) Attachment

As per norms for desirable amenity as given to model station, the public address system should be provided on stations classified as --- (a) A & B (b) A,B & C* (c) A,B,C & D (d) A, B,C, D & E (e) A

Description : As per norms for desirable amenity as given to model station, the public address system should be provided on stations classified as --- (a) A & B (b) A,B & C* (c) A,B,C & D (d) A, B,C, D & E (e) A

Last Answer : (b) A,B & C*

Which one of the following frequency meter is suitable for measuring radio frequency?

Description : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Last Answer : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Which of the following factors limit the deflection of the pointer of a PMMC instrument of about

Description : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Last Answer : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Torque/weight ratio of an instrument indicates

Description : Torque/weight ratio of an instrument indicates   (a) Selectivity (b) Accuracy (c) Fidelity (d) Sensitivity

Last Answer : Torque/weight ratio of an instrument indicates Sensitivity

Wagner's earth devices are used in AC bridge circuits for

Description : Wagner's earth devices are used in AC bridge circuits for (a) Eliminating the effect of earth capacitances (b) Eliminating the effect of intercomponent capacitances (c) Eliminating the effect of stray electrostatic fields (d) Shielding the bridge elements

Last Answer : Wagner's earth devices are used in AC bridge circuits for Eliminating the effect of earth capacitances

Loading effect is principally caused by instruments

Description : Loading effect is principally caused by instruments   (a) High resistance (b) Low sensitivity (c) High sensitivity (d) High range

Last Answer : B

Thermocouple instruments can be used for a frequency range upto

Description : Thermocouple instruments can be used for a frequency range upto   (a) 100Hz (b) 5000 Hz (c) 1 MHz (d) 50 MHz and above 

Last Answer : Thermocouple instruments can be used for a frequency range upto 50 MHz and above 

In a single phase induction energy meter, in order to obtain true value of energy, the shunt

Description : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by   (a) 90o (b) 0o (c) 45o (d) 60o

Last Answer : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by 90o

Gearing, blacklash, friction between moving parts and scale accuracies are generally known as

Description : Gearing, blacklash, friction between moving parts and scale accuracies are generally known as  (a) Instrument errors (b) Interference errors (c) Calibration errors (d) Interaction errors

Last Answer : Gearing, blacklash, friction between moving parts and scale accuracies are generally known as Instrument errors

If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of

Description : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is   (a) 33.2 V/cm (b) 0.03 cm/V (c) 66.4 V/cm (d) 0.015 cm/V

Last Answer : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is 0.03 cm/V

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is

Description : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

Last Answer : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is 500 W

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

If stator field is rotating in clockwise direction rotor rotates in

Description : If stator field is rotating in clockwise direction rotor rotates in (A) any direction (B) cannot predict (C) anticlockwise (D) clockwise 

Last Answer : If stator field is rotating in clockwise direction rotor rotates in clockwise 

What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp?

Description : What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp 

Last Answer : What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp 

What is the vector location of TRAP interrupt?

Description : What is the vector location of TRAP interrupt? (A) 0000 h (B) 0008 h (C) 0014 h (D) 0024 h

Last Answer : What is the vector location of TRAP interrupt?  0024 h

An amplifier has a voltage gain of 50; this gain in dB will be

Description : An amplifier has a voltage gain of 50; this gain in dB will be (A) 34 dB (B) 68 dB (C) 41 dB (D) 14 dB 

Last Answer : An amplifier has a voltage gain of 50; this gain in dB will be 34 dB

Converter is a device for transforming

Description : Converter is a device for transforming (A) ac to dc (B) dc to dc (C) dc to ac (D) ac to ac

Last Answer : Converter is a device for transforming ac to ac

The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is

Description : The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is (A) 1200 Hz (B) 600 Hz (C) 100 Hz (D) 50 Hz 

Last Answer : The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is 1200 Hz

The grid in triodes is made in the form of

Description : The grid in triodes is made in the form of (A) mesh (B) metal strip (C) metallic cylinder (D) single filament wire 

Last Answer : The grid in triodes is made in the form of mesh

The 555 timer can be used in which of the following configurations ?

Description : The 555 timer can be used in which of the following configurations ?  a) astable, monostable b) monostable, bistable c) astable, toggled d) bistable, tristable

Last Answer : The 555 timer can be used in astable, monostable configurations.

The dc current through each diode in a bridge rectifier equals : -

Description : The dc current through each diode in a bridge rectifier equals : - a) the load current b) half the dc load current c) twice the dc load current d) one-fourth the dc load current

Last Answer : The dc current through each diode in a bridge rectifier equals : - the load current

Intrinsic semiconductor material is characterized by a valence shell of how many electrons?

Description : Intrinsic semiconductor material is characterized by a valence shell of how many electrons? a) 1 b) 2 c) 4 d) 6

Last Answer : Intrinsic semiconductor material is characterized by a valence shell of 4 electrons.

Sample -and -hold circuits in ADCs are designed to : -

Description : Sample -and -hold circuits in ADCs are designed to : - a) sample and hold the output of the binary counter during the conversion process b) stabilize theAD Cs threshold c) voltage ... d) signal during the conversion process sample and hold the ADC staircase waveform during the conversion process

Last Answer : Sample -and -hold circuits in ADCs are designed to : - voltage during the conversion process stabilize the input analog