Why do people creep halfway through the intersection at stoplights?

Why do people creep halfway through the intersection at stoplights?
by

1 Answer

Answer :

Impatience.
by

Related questions

Police indicator lights on stoplights...

Description : Police indicator lights on stoplights...

Last Answer : Where is the light on the vehicle? On the vehicle we have a blinking white light that is used to control the traffic lights as we approach them. It gives use the green light only when it is blinking.

0g piercing stuck halfway through ear, how can I push it all the way through without getting a blowout?

Description : 0g piercing stuck halfway through ear, how can I push it all the way through without getting a blowout?

Last Answer : answer:Get some vaseline, neosporin, or even lube just to get it wet. Either that or ice it up to numb it a bit. Then take the gauge, and twist it as you push it through. That’s usually what I do whenever I’m going up a size. One question though. How long have you had the 2g in?

What letter is halfway through the alphabet?

Description : What letter is halfway through the alphabet?

Last Answer : There are 26 letters, so there is no exact "halfway". M and Nare 13th and 14th, splitting the halfway point.

Has anyone found an air mattress that doesn't deflate halfway through the night?

Description : Has anyone found an air mattress that doesn't deflate halfway through the night?

Last Answer : The Intex Rising Comfort sold at Cabela has great reviews and supposedly dosent deflate after a nights sleep.

P and O are points on opposite sides AD and BC of a parallelogram ABCD such that PQ passes through the point of intersection O of its diagonals AC and BD. -Maths 9th

Description : P and O are points on opposite sides AD and BC of a parallelogram ABCD such that PQ passes through the point of intersection O of its diagonals AC and BD. -Maths 9th

Last Answer : According to question PQ passes through the point of intersection O of its diagonals AC and BD.

P and O are points on opposite sides AD and BC of a parallelogram ABCD such that PQ passes through the point of intersection O of its diagonals AC and BD. -Maths 9th

Description : P and O are points on opposite sides AD and BC of a parallelogram ABCD such that PQ passes through the point of intersection O of its diagonals AC and BD. -Maths 9th

Last Answer : According to question PQ passes through the point of intersection O of its diagonals AC and BD.

A(5,0) and B(0,8) are two vertices of triangle OAB. a). What is the equation of the bisector of angle OAB. b). If E is the point of intersection of this bisector and the line through A and B,find the coordinates of E. Hence show that OA:OB = AE:EB -Maths 9th

Description : A(5,0) and B(0,8) are two vertices of triangle OAB. a). What is the equation of the bisector of angle OAB. b). If E is the point of intersection of this bisector and the line through A and B,find the coordinates of E. Hence show that OA:OB = AE:EB -Maths 9th

Last Answer : NEED ANSWER

A(5,0) and B(0,8) are two vertices of triangle OAB. a). What is the equation of the bisector of angle OAB. b). If E is the point of intersection of this bisector and the line through A and B,find the coordinates of E. Hence show that OA:OB = AE:EB -Maths 9th

Description : A(5,0) and B(0,8) are two vertices of triangle OAB. a). What is the equation of the bisector of angle OAB. b). If E is the point of intersection of this bisector and the line through A and B,find the coordinates of E. Hence show that OA:OB = AE:EB -Maths 9th

Last Answer : This answer was deleted by our moderators...

A line passes through the point of intersection of the lines 100x + 50y – 1 = 0 and 75x + 25y + 3 = 0 and makes equal intercepts on the axes. -Maths 9th

Description : A line passes through the point of intersection of the lines 100x + 50y – 1 = 0 and 75x + 25y + 3 = 0 and makes equal intercepts on the axes. -Maths 9th

Last Answer : (d) x + 2y = 2Let the required equation make intercept on x-axis = 2a ⇒ intercept made on y-axis = a ∴ Eqn of the given line in the intercept from:\(rac{x}{2a}+rac{y}{a}=1\) ...(i)Since the line ... 1 ⇒ a = 1.∴ Required equation of line : \(rac{x}{2 imes1}+rac{y}{1}=1\) ⇒ x + 2y = 2.

Find the equation of the line which passes through the point of intersection of the lines 2x – y + 5 = 0 -Maths 9th

Description : Find the equation of the line which passes through the point of intersection of the lines 2x – y + 5 = 0 -Maths 9th

Last Answer : (a) 45º 3x + y - 7 = 0 ⇒ y = -3x + 7 ⇒ Slope (m1) = -3 x + 2y + 9 = 0 ⇒ y = \(rac{-x}{2}\) - \(rac{9}{2}\) ⇒ Slope (m2) = \(-rac{1}{2}\)If θ is the angle between the given lines, then tan θ = \(\ ... \bigg|rac{-rac{5}{2}}{1+rac{3}{2}}\bigg|\)= \(\bigg|rac{-rac{5}{2}}{rac{5}{2}}\bigg|\) = 1∴ θ = 45°.

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

Metacentre is the point of intersection of (A) Vertical upward force through e.g. of body and center line of body (B) Buoyant force and the center line of body (C) Midpoint between e.g. and center of buoyancy (D) All of the above

Description : Metacentre is the point of intersection of (A) Vertical upward force through e.g. of body and center line of body (B) Buoyant force and the center line of body (C) Midpoint between e.g. and center of buoyancy (D) All of the above

Last Answer : Answer: Option B

In a theodolite the line passing through the intersection of the horizontal and vertical cross hairs and the optical centre of the object glass and its continuation, is known as (a) Horizontal axis (b) Vertical axis (c) Line of collination (d) Line of sight (e) Either of c or d above*

Description : In a theodolite the line passing through the intersection of the horizontal and vertical cross hairs and the optical centre of the object glass and its continuation, is known as (a) Horizontal axis (b) Vertical axis (c) Line of collination (d) Line of sight (e) Either of c or d above*

Last Answer : e) Either of c or d above*

How is it that you have to slow down your whole life, but when you die, they let cars run through red lights? What's the hurry all for?

Description : How is it that you have to slow down your whole life, but when you die, they let cars run through red lights? What's the hurry all for?

Last Answer : answer:Laugh! Good point, I never thought of that. I think they let all the cars through to keep the line together (unbroken by red lights) and to have a chain of cars united in a ... and public recognition. I'm sure there's a historical element in there somewhere, like from funeral processions.

How much damage am i really putting my poor car through?

Description : How much damage am i really putting my poor car through?

Last Answer : If you are familiar with the front end suspension on an automobile, okay i know you are not, so here is an explanation. shock absorbers have two main purposes. to reduce the dramatic shock inside ... for your vehicle. i would not go too long without having them replaced. its all about your safety.

New Zealanders: I have a full (car) licence and want to get a motorcycle licence. Do i need to go through Learners, Restricted and then Full again?

Description : New Zealanders: I have a full (car) licence and want to get a motorcycle licence. Do i need to go through Learners, Restricted and then Full again?

Last Answer : Isn’t a motercycle licence differant from a car licence? It is here and you need to go for a permit for the motercycle licence. It is a totally differant licence. But that is here in Maine.

Is Twitter Basically Made So Ordinary People Can Creep Celebrities?

Description : Is Twitter Basically Made So Ordinary People Can Creep Celebrities?

Last Answer : nah, i get free stuff from it too.

Invasive slumlord, almost no heat, CO (Carbon Monoxide), broken entrance locks, squatters, some creep coming and going as they please from the apt. unit, and illegal, hidden CCTV spy cams in apt. People of Reddit what would you do?

Description : Invasive slumlord, almost no heat, CO (Carbon Monoxide), broken entrance locks, squatters, some creep coming and going as they please from the apt. unit, and illegal, hidden CCTV spy cams in apt. People of Reddit what would you do?

Last Answer : Move lol

What is your favorite thing to do to creep people out?

Description : What is your favorite thing to do to creep people out?

Last Answer : Walk around the street with a glass of water. Subtle, yet oddly creepy.

What is your favorite thing to do to creep people out?

Description : What is your favorite thing to do to creep people out?

Last Answer : Walk around the street with a glass of water. Subtle, yet oddly creepy.

What are some innocuous things that creep you out?

Description : What are some innocuous things that creep you out?

Last Answer : Strangers walking up to me. .. sometimes I just want to be left alone.

Ever met a man or woman that gave you the creep vibe and it turned out that had done something (molestation, sexual assault)

Description : Ever met a man or woman that gave you the creep vibe and it turned out that had done something (molestation, sexual assault)

Last Answer : Wow. Yes and another time I’ll just go with my instincts.

Do Praying Mantis' creep you out?

Description : Do Praying Mantis' creep you out?

Last Answer : I have more of a fascination with them. They are good for the garden,

which of the following is not true regarding scope creep? -General Knowledge

Description : which of the following is not true regarding scope creep? -General Knowledge

Last Answer : A. It is when the cost of the project is more than expected

What is Creep ?

Description : What is Creep ?

Last Answer : Creep means walking on the chest.

Types of vertebrate animals which creep and crawl are called – (1) mammalians (2) amphibians (3) mollusks (4) reptilians

Description : Types of vertebrate animals which creep and crawl are called – (1) mammalians (2) amphibians (3) mollusks (4) reptilians

Last Answer : (4) reptilians Explanation: The types of vertebrate animals which creep and crawl are called reptilians.

Distinguish between creep and fatigue.

Description : Distinguish between creep and fatigue.

Last Answer : Creep is low and progressive deformation of a material with time under a constant stress at high temperature applications. Fatigue is the reduced tendency of material to offer resistance to applied stress under repeated or fluctuating loading condition.

The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Description : The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Last Answer : (C) Creep limit

Slow and progressive deformation of a material with time under constant stress is called (A) Creep (B) Erosion (C) Resilience (D) None of these

Description : Slow and progressive deformation of a material with time under constant stress is called (A) Creep (B) Erosion (C) Resilience (D) None of these

Last Answer : (A) Creep

Lead alone is not used in storing equipment, because it (A) Is very costly (B) Corrodes easily (C) Is having low creep strength (D) None of these

Description : Lead alone is not used in storing equipment, because it (A) Is very costly (B) Corrodes easily (C) Is having low creep strength (D) None of these

Last Answer : (C) Is having low creep strength

Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience

Description : Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience

Last Answer : (B) Toughness

Creep is not exhibited at low temperature by (A) Rubber (B) Acrylics (C) Lead (D) Plastics

Description : Creep is not exhibited at low temperature by (A) Rubber (B) Acrylics (C) Lead (D) Plastics

Last Answer : (C) Lead

Slow plastic deformation of metals under a constant stress is termed as __________ failure. (A) Fatigue (B) Endurance (C) Creep (D) None of these

Description : Slow plastic deformation of metals under a constant stress is termed as __________ failure. (A) Fatigue (B) Endurance (C) Creep (D) None of these

Last Answer : (C) Creep

Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Description : Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Last Answer : (C) Abrasion resistance & toughness

Reduction in the grain size reduces the __________ of the material. (A) Fatigue resistance (B) Tensile strength (C) Creep resistance (D) All (A), (B) & (C)

Description : Reduction in the grain size reduces the __________ of the material. (A) Fatigue resistance (B) Tensile strength (C) Creep resistance (D) All (A), (B) & (C)

Last Answer : (C) Creep resistance

Fill in the blank. Crashing refers to when the task duratioSelect one: a. scope creep b. floated c. slack d. compressed e. expeditedn’s are __ along the critical path to meet the project completion date.

Description : Fill in the blank. Crashing refers to when the task duration’s are __ along the  critical path to meet the project completion date. Select one: a. scope creep b. floated c. slack d. compressed e. expedited

Last Answer : d. compressed

Fill in the blank. Risk represents the likelihood that an event will happen during the life of the project that will negatively affect the ________________ of project goals. Select one: a. scope creep b. achievement c. float d. rough order of magnitude e. slack

Description : Fill in the blank. Risk represents the likelihood that an event will happen during  the life of the project that will negatively affect the ________________ of project goals. Select one: a. scope creep b. achievement c. float d. rough order of magnitude e. slack

Last Answer : b. achievement

The most common reason for schedule and cost overruns that surface after the project is underway is scope creep.

Description : The most common reason for schedule and cost overruns that surface after the project  is underway is scope creep.

Last Answer : Ans: True

The underlying cause of many missed project deadlines is scope creep.

Description : The underlying cause of many missed project deadlines is scope creep.

Last Answer : Ans: True

As 'Fly' is related to 'Parrot' in the same way 'Creep' is related to what? (A) Snake(B) Rabbit(C) Fish(D) Crocodile(E) Sparrow

Description : As 'Fly' is related to 'Parrot' in the same way 'Creep' is related to what? (A) Snake(B) Rabbit(C) Fish(D) Crocodile(E) Sparrow

Last Answer : (A) Word

Scope creep is only a minor factor in projects running over schedule, and every effort should be made to incorporate any changes into the present system if they would truly be beneficial.

Description : Scope creep is only a minor factor in projects running over schedule, and every effort  should be made to incorporate any changes into the present system if they would truly be  beneficial.

Last Answer : Ans: False

Deformation that occurs due to stress over a period of time is known as ____________ a) Wear resistance b) Fatigue c) Creep d) Fracture

Description : Deformation that occurs due to stress over a period of time is known as ____________ a) Wear resistance b) Fatigue c) Creep d) Fracture

Last Answer : c) Creep

In wind erosion floating of less than 0.1 mm soil particle is observed in — stage a. Saltation b. Surface creep c. Suspension d. None of these

Description : In wind erosion floating of less than 0.1 mm soil particle is observed in — stage a. Saltation b. Surface creep c. Suspension d. None of these

Last Answer : c. Suspension

__________ flow means the flow of incompressible fluid with no shear. (A) Potential (B) Streamline (C) Creep (D) Boundary layer

Description : __________ flow means the flow of incompressible fluid with no shear. (A) Potential (B) Streamline (C) Creep (D) Boundary layer

Last Answer : (A) Potential

On decreasing the grain size of a polycrystalline material, the property most likely to deteriorate is (A) Creep (B) Toughness (C) Tensile strength (D) Fatigue

Description : On decreasing the grain size of a polycrystalline material, the property most likely to deteriorate is (A) Creep (B) Toughness (C) Tensile strength (D) Fatigue

Last Answer : (B) Toughnes

With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Description : With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Last Answer : (C) Remain constant

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

Consideration of the creep is the most important in case of the (A) Blades of gas turbine (B) Piston of an I. C. engine (C) Flywheel of steam engine (D) Cycle chain

Description : Consideration of the creep is the most important in case of the (A) Blades of gas turbine (B) Piston of an I. C. engine (C) Flywheel of steam engine (D) Cycle chain

Last Answer : (A) Blades of gas turbine