The phenomenon in which slow extension of material takes place with the time at constant load is called (A) Plasticity (B) Creep (C) Elasticity (D) DuctilityThe phenomenon in which slow extension of material takes place withthe time at constant load is called(A) Plasticity(B) Creep(C) Elasticity(D) Ductility

The phenomenon in which slow extension of material takes place with
the time at constant load is called
(A) Plasticity
(B) Creep
(C) Elasticity
(D) Ductility
by

1 Answer

Answer :

(B) Creep
by

Related questions

The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleabilityy

Last Answer : (c) Ductility

A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Description : A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Last Answer : (B) Plasticity

The ability of the material to deform without breaking is called (a) Elasticity (b) Plasticity (c) Creep (d) None of these

Description : The ability of the material to deform without breaking is called (a) Elasticity (b) Plasticity (c) Creep (d) None of these

Last Answer : (b) Plasticity

The property of a material by which it can be beaten or rolled into thin plates, is called (A) Malleability (B) Ductility (C) Plasticity (D) Elasticity

Description : The property of a material by which it can be beaten or rolled into thin plates, is called  (A) Malleability  (B) Ductility  (C) Plasticity  (D) Elasticity

Last Answer : (A) Malleability 

The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Description : The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Last Answer : (B) Ductility

The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Last Answer : (d) Malleability

The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Description : The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Last Answer : (b) Ductility

Vulcanisation of rubber does not increase its (A) Elasticity(B) Plasticity(C) Ductility(D) None of these

Description : Vulcanisation of rubber does not increase its (A) Elasticity (B) Plasticity (C) Ductility (D) None of these

Last Answer : (B) Plasticity

The phenomenon of slow extension of materials having constant load, i.e. increasing with the time is called (A) Creeping (B) Yielding (C) Breaking (D) None of these

Description : The phenomenon of slow extension of materials having constant load, i.e. increasing with the time  is called  (A) Creeping  (B) Yielding  (C) Breaking  (D) None of these 

Last Answer : (A) Creeping 

The property by which a body returns to its original shape after removal of the force, is called (A) Plasticity (B) Elasticity (C) Ductility (D) Malleability

Description : The property by which a body returns to its original shape after removal of the force, is called  (A) Plasticity  (B) Elasticity  (C) Ductility  (D) Malleability 

Last Answer : (B) Elasticity 

Slow and progressive deformation of a material with time under constant stress is called (A) Creep (B) Erosion (C) Resilience (D) None of these

Description : Slow and progressive deformation of a material with time under constant stress is called (A) Creep (B) Erosion (C) Resilience (D) None of these

Last Answer : (A) Creep

Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience

Description : Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience

Last Answer : (B) Toughness

The stress at which extension of the material takes place more rapidly as compared to the increase in load is termed as the __________ point of the material. (A) Elastic (B) Ultimate (C) Yielding (D) Breaking

Description : The stress at which extension of the material takes place more rapidly as compared to the increase in load is termed as the __________ point of the material. (A) Elastic (B) Ultimate (C) Yielding (D) Breaking

Last Answer : (C) Yielding

The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point

The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Description : The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Last Answer : (c) Yield point

A member which is subjected to reversible tensile or compressive stress may fail at a stress lower than the ultimate stress of the material. This property of metal, is called (A) Plasticity of the metal (B) Elasticity of the metal (C) Fatigue of the metal (D) Workability of the metal

Description : A member which is subjected to reversible tensile or compressive stress may fail at a stress lower  than the ultimate stress of the material. This property of metal, is called  (A) Plasticity of the ... ) Elasticity of the metal  (C) Fatigue of the metal  (D) Workability of the metal

Last Answer : (C) Fatigue of the metal

The permanent mode of deformation of a material known as _____________ a) Elasticity b) Plasticity c) Slip deformation d) Twinning deformation

Description : The permanent mode of deformation of a material known as _____________ a) Elasticity b) Plasticity c) Slip deformation d) Twinning deformation

Last Answer : b) Plasticity

When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Description : When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Last Answer : d) Plasticity

Slow plastic deformation of metals under a constant stress is termed as __________ failure. (A) Fatigue (B) Endurance (C) Creep (D) None of these

Description : Slow plastic deformation of metals under a constant stress is termed as __________ failure. (A) Fatigue (B) Endurance (C) Creep (D) None of these

Last Answer : (C) Creep

The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Last Answer : B. Percent elongation

Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Description : Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Last Answer : (C) Resilience

__________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Description : __________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Last Answer : d. Plasticity

The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Description : The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Last Answer : Answer: Option B

Define ductility; plasticity; hardness strength.

Description : Define ductility; plasticity; hardness strength.

Last Answer : Definition: 1) Ductility Ductility is the ability of a material to be deformed plastically without fracture under tensile strength. Ductility is the property of material by which materials can be ... or cutting. The ability of a material to resist wear or abrasion and resist penetration.

Define ductility and plasticity.

Description : Define ductility and plasticity.

Last Answer : Ductility: It is the property of material to undergo a considerable deformation under tension before rupture.  Plasticity: The plasticity of a material is the ability to change its shape without destruction ... to it when the forces are removed. OR Lack of elasticity is called as plasticity. 

Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Last Answer : (a) Ductility

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its (A) Elasticity (B) Strength (C) Plasticity (D) Weathering characteristics

Description : Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its (A) Elasticity (B) Strength (C) Plasticity (D) Weathering characteristics

Last Answer : (D) Weathering characteristics

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Description : Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Last Answer : (C) Abrasion resistance & toughness

18.The total extension of a taper rod of length ‘L’ and end diameters ‘D1’ and ‘D2’, subjected to a load (P), is given of a. 4PL/ΠE. D1D2 b. 3PL/ΠE. D1D2 c. 2PL/ΠE. D1D2 d. PL/ΠE.D1D2 Where E=Young’s modulus of elasticity

Description : 18.The total extension of a taper rod of length ‘L’ and end diameters ‘D1’ and ‘D2’, subjected to a load (P), is given of a. 4PL/ΠE. D1D2 b. 3PL/ΠE. D1D2 c. 2PL/ΠE. D1D2 d. PL/ΠE.D1D2 Where E=Young’s modulus of elasticity

Last Answer : a. 4PL/ΠE. D1D2

The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress

Description : The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress

Last Answer : b) Elasticity

With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Description : With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Last Answer : (C) Remain constant

Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is proportional to the age of the member at the time of loading. (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Description : Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is ... to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Last Answer : (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete

Distinguish between elasticity and plasticity.

Description : Distinguish between elasticity and plasticity.

Last Answer : Distinguish between elasticity and plasticity.

Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Description : Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Last Answer : a) Modulus of elasticity

The tendency of a deformed solid to regain its actual proportions instantly upon unloading known as ______________ a) Perfectly elastic b) Delayed elasticity c) Inelastic effect d) Plasticity

Description : The tendency of a deformed solid to regain its actual proportions instantly upon unloading known as ______________ a) Perfectly elastic b) Delayed elasticity c) Inelastic effect d) Plasticity

Last Answer : a) Perfectly elastic

In the relation ( T/J = Gθ/L = τ/ R), the letter G denotes modulus of ______ a. elasticity b. plasticity c. rigidity d. resilience

Description : In the relation ( T/J = Gθ/L = τ/ R), the letter G denotes modulus of ______ a. elasticity b. plasticity c. rigidity d. resilience

Last Answer : c. rigidity

What country whose name starts and ends withthe same letter?

Description : What country whose name starts and ends withthe same letter?

Last Answer : Austria

Professional accountants may encounter problems in identifying unethical behavior or in resolving an ethical conflict. When facedwith significant ethical issues, professionalaccountants should do the following, excepta. Follow the established policies of theemploying organization to of such Review the conflict problem with superior if the do not resolve the ethicalconflict.c. If the problem is not resolved withthe immediate superior and theprofessional accountant determinesto go to the next higher manageriallevel, the immediate superior neednot be notified of the decision.d. Seek counseling and advice on aconfidential basis with an independentadvisor or the applicable professionalaccountancy body or regulatory body toobtain an understanding of possiblecourses of action

Description : Professional accountants may encounter problems in identifying unethical behavior or in resolving an ethical conflict. When facedwith significant ethical issues, professional accountants should do the following ... body or regulatory body to obtain an understanding of possible courses of action

Last Answer : If the problem is not resolved with the immediate superior and the professional accountant determines to go to the next higher managerial level, the immediate superior need not be notified of the decision.

What can provide people in every village withthe information and skillsthey need to develop their talents? a. The solar system. b. The internet. c. The Genome. d. All of the above.

Description : What can provide people in every village withthe information and skillsthey need to develop their talents? a. The solar system. b. The internet. c. The Genome. d. All of the above.

Last Answer : b. The internet.

What can provide people in every village withthe information and skillsthey need to develop their talents? a. The solar system. b. The internet. c. The Genome. d. All of the above

Description : What can provide people in every village withthe information and skillsthey need to develop their talents? a. The solar system. b. The internet. c. The Genome. d. All of the above

Last Answer : b. The internet.

Data link control deals withthe design and procedures for ______communication. A) node-to-node B) host-to-host C) process-to-process D) none of the above

Description : Data link control deals withthe design and procedures for ______communication. A) node-to-node B) host-to-host C) process-to-process D) none of the above

Last Answer : node-to-node

The highest stress that a material can withstand for a specified length of time without excessive deformation is called the __________ strength. (A) Creep (B) Endurance (C) Fatigue (D) None of these

Description : The highest stress that a material can withstand for a specified length of time without excessive deformation is called the __________ strength. (A) Creep (B) Endurance (C) Fatigue (D) None of these

Last Answer : Option A

When vaporisation takes place through a blanketting film of gas, the phenomenon is termed as __________ boiling. (A) Pool (B) Nucleate (C) Transition (D) Film

Description : When vaporisation takes place through a blanketting film of gas, the phenomenon is termed as __________ boiling. (A) Pool (B) Nucleate (C) Transition (D) Film

Last Answer : (D) Film

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²

The Modulus of Elasticity for a material refers to: w) the ability of a material to resist corrosion x) the ratio of stress over strain y) the maximum load over the cross sectional area z) none of the above

Description : The Modulus of Elasticity for a material refers to: w) the ability of a material to resist corrosion x) the ratio of stress over strain y) the maximum load over the cross sectional area z) none of the above

Last Answer : ANSWER: X -- THE RATIO OF STRESS OVER STRAIN

Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility

Description : Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility

Last Answer : (D) The ability of a material to fracture without appreciable deformation is called its ductility

The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience