What does Obama stand to gain from reforming Health Care?

What does Obama stand to gain from reforming Health Care?
by

1 Answer

Answer :

I don’t think Obama is doing this for personal gain. Also, you can’t ask a political question and expect it not to be discussed in political terms.
by

Related questions

Has anyone applied for the Market Place 2018 (Obama) health care insurance or had it before?

Description : Has anyone applied for the Market Place 2018 (Obama) health care insurance or had it before?

Last Answer : I did it for 2017. I feel like I didn't have great advice from other people when I did. I will likely make too much money and wind up owing money. I knew I would be cutting it close though, ... marketplace and subsidy was going to be my best option, I wish I had had a broader discussion with her.

If Obama passes health care tomorrow my mom's gonna lose her job, what do I do?

Description : If Obama passes health care tomorrow my mom's gonna lose her job, what do I do?

Last Answer : This is the single most selfish reason I’ve ever seen for being against health care reform. I think you should be nominated for some sort of award.

I want to contact President Obama directly about standing up to lobbyists on health care (and send him a copy of Saturday's NYTimes article. How can I do this?

Description : I want to contact President Obama directly about standing up to lobbyists on health care (and send him a copy of Saturday's NYTimes article. How can I do this?

Last Answer : Make a website, “canbarackobamahearme.com,” and document your efforts to contact the president directly. Hopefully a radio station will pick up on it, interview you, etc. Think cangooglehearme.com, or the movie My Date With Drew

If someone else took the stand to announce another's misfortune (like Obama did on TV), who would it be and what would they say?

Description : If someone else took the stand to announce another's misfortune (like Obama did on TV), who would it be and what would they say?

Last Answer : Funny you should ask. I just saw this anouncement of Obi-Wan’s death today I was looking for a way to share it.

Does President Obama really have parasites? Is his health good?

Description : Does President Obama really have parasites? Is his health good?

Last Answer : answer:Stop believing what you read in tabloids. In the unlikely the President contracted parasites his doctors would eradicate them. In the event that a President is ill and unable to perform his job the Vice President steps in.

What is the role of an ordinary citizen in reforming the political parties? -SST 10th

Description : What is the role of an ordinary citizen in reforming the political parties? -SST 10th

Last Answer : There are two ways in which political parties can be reformed: 1.People can put pressure on political parties. This can be done through petitions, publicity and agitations. Ordinary citizens, pressure ... it from outside. The problem of bad politics can be solved by more and better politics.

What role has the Election Commission played in reforming political parties? -SST 10th

Description : What role has the Election Commission played in reforming political parties? -SST 10th

Last Answer : (i) Made it compulsory for parties to hold organisational elections. (ii) Political parties are to file their income-tax returns.

Which two other ways can help in reforming political parties? -SST 10th

Description : Which two other ways can help in reforming political parties? -SST 10th

Last Answer : (i) Pressure should be put on the political parties. This can be done through petitions and agitations. Ordinary citizens, pressure groups and movements can bring about reforms if they join hands. If ... from outside, it has no effect. To improve bad politics, goods politics has to take charge.

What is Aromaticization or Reforming ?

Description : What is Aromaticization or Reforming ?

Last Answer : The process of converting free chain alkene from petrolium to aromatic hydrocarbons in the presence of suitable catalysts at high pressure and heat is called aromatization.

The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling

Description : The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling

Last Answer : Answer: a Explanation: The molecular structure of the straight-run gasoline is changed by reforming and hydrocarbons are decomposed into smaller hydrocarbons by cracking.

Hydrocarbons are decomposed into smaller hydrocarbons by a) reforming b) refining c) cracking d) polymerization

Description : Hydrocarbons are decomposed into smaller hydrocarbons by a) reforming b) refining c) cracking d) polymerization

Last Answer : Answer: c Explanation: Hydrocarbons are decomposed into smaller hydrocarbons by cracking while the molecular structure of the straight-run gasoline is changed by reforming.

Liquid hydrocarbons are converted to low molecular weight gaseous hydrocarbons by a process known as (a) hydrogenation (b) reforming (c) cracking (d) reduction

Description : Liquid hydrocarbons are converted to low molecular weight gaseous hydrocarbons by a process known as (a) hydrogenation (b) reforming (c) cracking (d) reduction

Last Answer : Ans:(c)

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue

Description : Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue

Last Answer : (A) Olefinic hydrocarbon

Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Description : Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Last Answer : (A) Reforming

The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Description : The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Last Answer : (C) Straight run gasoline

Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Description : Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Last Answer : (B) 15-45 Kgf/cm2 & 450-550°C

Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Description : In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Last Answer : (B) Catalytic reforming

Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene(C) Adsorb arsenic from feedstock to catalytic reforming(D) All (A), (B) & (C)

Description : Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene (C) Adsorb arsenic from feedstock to catalytic reforming (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

Description : The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

Last Answer : (A) Dehydrogenation of naphthenes

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Last Answer : (A) Naphtha or straight run gasoline

. Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)

Description : . Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming

Description : Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming

Last Answer : (D) Steam reforming

Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming

Description : Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming

Last Answer : (C) Platforming

Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Last Answer : (C) Reforming

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Last Answer : (B) Distillation

Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction(C) Produces high octane number gasoline(D) None of these

Description : Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction (C) Produces high octane number gasoline (D) None of these

Last Answer : (D) None of these

Which of the following processes is used for the production of petroleum coke? (A) Stabilisation (B) Visbreaking (C) Cracking (D) Reforming

Description : Which of the following processes is used for the production of petroleum coke? (A) Stabilisation (B) Visbreaking (C) Cracking (D) Reforming

Last Answer : (C) Cracking

Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Description : Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Last Answer : (B) Naphthenes into aromatics

Which of the following oil gasification processes is non-catalytic? (A) Semet-Solvay process (B) Segas process (C) Onia-Gegi process (D) Steam reforming of naphtha

Description : Which of the following oil gasification processes is non-catalytic? (A) Semet-Solvay process (B) Segas process (C) Onia-Gegi process (D) Steam reforming of naphtha

Last Answer : (A) Semet-Solvay process

Which of the following is not endothermic? (A) Cracking (B) Reforming (C) Gasification (D) Partial oxidation

Description : Which of the following is not endothermic? (A) Cracking (B) Reforming (C) Gasification (D) Partial oxidation

Last Answer : (D) Partial oxidation

Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Last Answer : (A) 700 - 1000

Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Last Answer : (C) Nickel oxide on alumina support

Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1

Description : Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1

Last Answer : (B) 3.5 : 1

Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Last Answer : (A) Electrolysis of water

Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Last Answer : (C) Partial oxidation

Ammonia synthesis gas is produced from natural gas by (A) Thermal cracking (B) Steam reforming (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from natural gas by (A) Thermal cracking (B) Steam reforming (C) Partial oxidation (D) Hydrogenation

Last Answer : (B) Steam reforming

Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)

Description : Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven gas(B) Steam reforming of naphtha(C) Cracking of natural gas(D) Electrolysis of water

Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water

Last Answer : (D) Electrolysis of water

Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Last Answer : (A) Nickel

Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Last Answer : (B) Endothermic

Which of the following is not endothermic in nature? (A) Combustion of sulphur (B) Gasification of carbon (C) Thermal cracking of fuel oil (D) Steam reforming of naphtha

Description : Which of the following is not endothermic in nature? (A) Combustion of sulphur (B) Gasification of carbon (C) Thermal cracking of fuel oil (D) Steam reforming of naphtha

Last Answer : (A) Combustion of sulphur

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion

Conversion of CO to CO2 by steam in presence of a catalyst is called (A) Steam reforming (B) Shift conversion (C) Steam gasification (D) None of these

Description : Conversion of CO to CO2 by steam in presence of a catalyst is called (A) Steam reforming (B) Shift conversion (C) Steam gasification (D) None of these

Last Answer : (B) Shift conversion

Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (B) (i) - Fe/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3

Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Description : Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Last Answer : (A) Iron-steam reaction

Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Description : Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Last Answer : (C) Electrolysis of water

Why are Native Americans exempt from the Obama Care individual mandate?

Description : Why are Native Americans exempt from the Obama Care individual mandate?

Last Answer : I think this explains it.