The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

The main reaction in reforming is the
(A) Dehydrogenation of naphthenes
(B) Hydrogenation of naphthenes
(C) Hydrocracking of paraffins
(D) Saturation of olefins
by

1 Answer

Answer :

(A) Dehydrogenation of naphthenes
by

Related questions

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Description : Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Last Answer : (B) Naphthenes into aromatics

Which of the following has the highest octane number? (A) Aromatics(B) i-paraffins(C) Naphthenes(D) Olefins

Description : Which of the following has the highest octane number? (A) Aromatics (B) i-paraffins (C) Naphthenes (D) Olefins

Last Answer : (A) Aromatics

Isomerisation converts the __________ tot-paraffins. (A) Paraffins (B) Olefins (C) Naphthenes (D) None of these

Description : Isomerisation converts the __________ tot-paraffins. (A) Paraffins (B) Olefins (C) Naphthenes (D) None of these

Last Answer : (A) Paraffins

H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Description : H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Last Answer : (D) Naphthenes

Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Description : Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Last Answer : (A) Paraffins

In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Description : In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Last Answer : Ans :d

Commercially ethylene is produced from naphtha by (A) Catalytic cracking (B) Catalytic dehydrogenation (C) Pyrolysis (D) Hydrocracking

Description : Commercially ethylene is produced from naphtha by (A) Catalytic cracking (B) Catalytic dehydrogenation (C) Pyrolysis (D) Hydrocracking

Last Answer : (D) Hydrocracking

Coal tar (produced by high temperature carbonisation) is the main source of (A) Aromatic compounds (B) Aliphatic compounds (C) Paraffins (D) Olefins

Description : Coal tar (produced by high temperature carbonisation) is the main source of (A) Aromatic compounds (B) Aliphatic compounds (C) Paraffins (D) Olefins

Last Answer : (A) Aromatic compounds

Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Description : Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Last Answer : (A) Reforming

Which is almost absent in crude petroleum? (A) Olefins (B) Mercaptans (C) Naphthenes (D) Cycloparaffins

Description : Which is almost absent in crude petroleum? (A) Olefins (B) Mercaptans (C) Naphthenes (D) Cycloparaffins

Last Answer : (B) Mercaptans

Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Description : Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Last Answer : (A) Propane & butane

The general formula of naphthenes is(A) CnH2n + 2(B) CnH2n-6(where, n ≥ 6)(C) CnHn-4(D) Same as that for olefins i.e. CnH2n

Description : The general formula of naphthenes is (A) CnH2n + 2 (B) CnH2n-6 (where, n ≥ 6) (C) CnHn-4 (D) Same as that for olefins i.e. CnH2n

Last Answer : (B) CnH2n-6 (where, n ≥ 6)

CnH2n is the general formula for (A) Olefins (B) Naphthenes (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : CnH2n is the general formula for (A) Olefins (B) Naphthenes (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Commercial production of Vanaspati is done by __________ of edible vegetable oils. (A) Hydrogenation (B) Oxidation (C) Hydrolysis (D) Hydrocracking

Description : Commercial production of Vanaspati is done by __________ of edible vegetable oils. (A) Hydrogenation (B) Oxidation (C) Hydrolysis (D) Hydrocracking

Last Answer : (A) Hydrogenation

An oil is converted into fat by its (A) Hydrogenation(B) Hydrolysis(C) Hydrocracking(D) Hydration

Description : An oil is converted into fat by its (A) Hydrogenation (B) Hydrolysis (C) Hydrocracking (D) Hydration

Last Answer : (A) Hydrogenation

Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Description : Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Last Answer : (C) n-paraffins

Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane number than straight chain paraffins with same number of carbon atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Description : Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane ... atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Last Answer : (A) Octane number of i-octane is zero

Which of the following has the highest gum forming tendency in gosoline? (A) Paraffins (B) Diolefins (C) Aromatics (D) Naphthenes

Description : Which of the following has the highest gum forming tendency in gosoline? (A) Paraffins (B) Diolefins (C) Aromatics (D) Naphthenes

Last Answer : (B) Diolefins

Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Description : Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Last Answer : (A) Aromatics

Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Description : Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Last Answer : (A) Paraffins

Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Description : Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Last Answer : (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Description : Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Last Answer : (B) Paraffins

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion

Which of the following reactions is undesirable in the production of catalytically reformed gasoline? (A) Dehydrogenation of Naphthene (B) Dehydrogenation of lower paraffins (C) Dehydrocyclization of higher paraffins (D) Isomerisation of paraffins

Description : Which of the following reactions is undesirable in the production of catalytically reformed gasoline? (A) Dehydrogenation of Naphthene (B) Dehydrogenation of lower paraffins (C) Dehydrocyclization of higher paraffins (D) Isomerisation of paraffins

Last Answer : (B) Dehydrogenation of lower paraffins

Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Description : Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Last Answer : (C) Aromatics

Alkylation (A) Causes olefins to combine with each other(B) Causes olefins to combine with iso-paraffins(C) Converts iso-paraffin into olefin(D) Converts olefin into paraffin

Description : Alkylation (A) Causes olefins to combine with each other (B) Causes olefins to combine with iso-paraffins (C) Converts iso-paraffin into olefin (D) Converts olefin into paraffin

Last Answer : (B) Causes olefins to combine with iso-paraffins

Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Last Answer : (A) Aromatics

Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel oils is higher than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

What is the difference between paraffins and olefins?

Description : What is the difference between paraffins and olefins?

Last Answer : Need answer

For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: b Explanation: For C.I. engines fuel most preferred are paraffins and for S.I. engines fuel most preferred are aromatics.

For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: a Explanation: For S.I. engines fuel most preferred are aromatics while for C.I. engines fuel most preferred are paraffins.

Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming

Description : Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming

Last Answer : (D) Steam reforming

Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Last Answer : (C) Partial oxidation

Ammonia synthesis gas is produced from natural gas by (A) Thermal cracking (B) Steam reforming (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from natural gas by (A) Thermal cracking (B) Steam reforming (C) Partial oxidation (D) Hydrogenation

Last Answer : (B) Steam reforming

Liquid hydrocarbons are converted to low molecular weight gaseous hydrocarbons by a process known as (a) hydrogenation (b) reforming (c) cracking (d) reduction

Description : Liquid hydrocarbons are converted to low molecular weight gaseous hydrocarbons by a process known as (a) hydrogenation (b) reforming (c) cracking (d) reduction

Last Answer : Ans:(c)

Name the endothermic reaction out of the following: (A) Catalytic cracking (B) Hydrocracking (C) Dehydrogeneration of Naphthene to produce aromatic (D) Catalytic polymerisation

Description : Name the endothermic reaction out of the following: (A) Catalytic cracking (B) Hydrocracking (C) Dehydrogeneration of Naphthene to produce aromatic (D) Catalytic polymerisation

Last Answer : (C) Dehydrogeneration of Naphthene to produce aromatic

Petroleum coke is commercially produced by the __________ process. (A) Hydrocracking (B) Visbreaking (C) Fluid catalytic cracking (D) Delayed coking

Description : Petroleum coke is commercially produced by the __________ process. (A) Hydrocracking (B) Visbreaking (C) Fluid catalytic cracking (D) Delayed coking

Last Answer : (D) Delayed coking

Hydrocracking employs (A) High pressure & temperature(B) Low pressure & temperature(C) High pressure and low temperature(D) High temperature and low pressure

Description : Hydrocracking employs (A) High pressure & temperature (B) Low pressure & temperature (C) High pressure and low temperature (D) High temperature and low pressure

Last Answer : (A) High pressure & temperature

Malic enzyme convers malic acid, in the presence of NADP+ to Pyruvic acid. This reaction is a/an (A) Decarboxylation (B) Decarboxylation and Dehydrogenation (C) Dehydrogenation (D) Oxidation

Description : Malic enzyme convers malic acid, in the presence of NADP+ to Pyruvic acid. This reaction is a/an (A) Decarboxylation (B) Decarboxylation and Dehydrogenation (C) Dehydrogenation (D) Oxidation

Last Answer : Answer : B

Aniline is prepared by (a) the reaction of benzene with ammonia (b) the reduction of nitrobenzene with Sn/HCl (c) the dehydrogenation of nitrobenzene (d) the reaction of nitrobenzene with I2/NaOH

Description : Aniline is prepared by (a) the reaction of benzene with ammonia (b) the reduction of nitrobenzene with Sn/HCl (c) the dehydrogenation of nitrobenzene (d) the reaction of nitrobenzene with I2/NaOH

Last Answer : the reduction of nitrobenzene with Sn/HCl

Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction(C) Produces high octane number gasoline(D) None of these

Description : Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction (C) Produces high octane number gasoline (D) None of these

Last Answer : (D) None of these

Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Last Answer : (A) 700 - 1000

Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Description : Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Last Answer : (A) Iron-steam reaction

Semibatch reactor is preferred, when a/an (A) A highly exothermic reaction is to be controlled (B) Undesirable side reaction (at high concentration of one of the reactants) is to be avoided (C) A gas is to be reacted with liquid (e.g. hydrogenation of fat) (D) All (A), (B), and (C

Description : Semibatch reactor is preferred, when a/an (A) A highly exothermic reaction is to be controlled (B) Undesirable side reaction (at high concentration of one of the reactants) is to be avoided (C) A gas is to be reacted with liquid (e.g. hydrogenation of fat) (D) All (A), (B), and (C

Last Answer : (D) All (A), (B), and (C

Hydrogenation of vegetable oils is a/an __________ reaction. (A) Endothermic (B) Autocatalytic (C) Exothermic (D) Homogenous

Description : Hydrogenation of vegetable oils is a/an __________ reaction. (A) Endothermic (B) Autocatalytic (C) Exothermic (D) Homogenous

Last Answer : (C) Exothermic

Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Description : Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)