Strain is defined as :** A. An external force B. An internal force to oppose external load C. Deformity opposed the applied load

Strain is defined as :**
A. An external force
B. An internal force to oppose external load
C. Deformity opposed the applied load
by

1 Answer

Answer :

C. Deformity opposed the applied load
by

Related questions

Modulus of elasticity is defined as: A. The stress at the proportional limit B. The stress-strain ratio within the proportional limit

Description : Modulus of elasticity is defined as: A. The stress at the proportional limit B. The stress-strain ratio within the proportional limit

Last Answer : B. The stress-strain ratio within the proportional limit

In order to help prevent the development of an external rotation deformity of the hip in a patient who must remain in bed for any period of time, the most appropriate nursing action would be to use a) a trochanter roll extending from the crest of the ilium to the midthigh. A trochanter roll, properly placed, provides resistance to the external rotation of the hip. b) pillows under the lower legs. Pillows under the legs will not prevent the hips from rotating externally. c) a hip-abductor pillow. A hip-abductor pillow is used for the patient after total hip replacement surgery. d) a footboard. A footboard will not prevent the hips from rotating externally.

Description : In order to help prevent the development of an external rotation deformity of the hip in a patient who must remain in bed for any period of time, the most appropriate nursing action would be ... hip replacement surgery. d) a footboard. A footboard will not prevent the hips from rotating externally.

Last Answer : a) a trochanter roll extending from the crest of the ilium to the midthigh. A trochanter roll, properly placed, provides resistance to the external rotation of the hip.

If someone is opposed to abortion based on their belief in the sanctity of human life, does this mean they must also oppose acts of warfare that result in the loss of human lives?

Description : If someone is opposed to abortion based on their belief in the sanctity of human life, does this mean they must also oppose acts of warfare that result in the loss of human lives?

Last Answer : Not necessarily. Say the other guy wants to kill you, for instance.

To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in addition to the direction of individual root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Description : To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in ... root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Last Answer : B. The age and shape of pulp chamber; in addition to the direction of individual root canals.

The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion of the resin. C. Produces porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Last Answer : B. Produces porosity on the internal portion of the resin.

.In primary teeth, failure of Ca(OH)2 pulpotomy is MOST likely to produce:** A. External resorption B. Internal resorption C. Necrosis of the pulp D. Ankylosis

Description : .In primary teeth, failure of Ca(OH)2 pulpotomy is MOST likely to produce:** A. External resorption B. Internal resorption C. Necrosis of the pulp D. Ankylosis

Last Answer : B. Internal resorption

After replantation of an avulsed tooth 2 ½ hours after incident; the most likely diagnosis is, A. External resorption B. Internal resorption C. Pulp stones

Description : After replantation of an avulsed tooth 2 ½ hours after incident; the most likely diagnosis is, A. External resorption B. Internal resorption C. Pulp stones

Last Answer : A. External resorption

On replantation of an avulseds tooth you could see, A. Surface resorption, external resorption B. Internal resorption C. Inflammatory resorption D. Replacement resorption E. A, C and D F. All of the above

Description : On replantation of an avulseds tooth you could see, A. Surface resorption, external resorption B. Internal resorption C. Inflammatory resorption D. Replacement resorption E. A, C and D F. All of the above

Last Answer : E. A, C and D

The internal molecular attraction of a soil, the cohesion (A) Decreases as the moisture content increases (B) Increases as the moisture content decreases (C) Is more in well compacted clays (D) Depends upon the external applied load

Description : The internal molecular attraction of a soil, the cohesion (A) Decreases as the moisture content increases (B) Increases as the moisture content decreases (C) Is more in well compacted clays (D) Depends upon the external applied load

Last Answer : Answer: Option C

The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Last Answer : (D) All three factors

Under complex or simple loading, strain energy is (a) External work done (b) Internal work done (c) Both internal and external work (d) None

Description : Under complex or simple loading, strain energy is (a) External work done (b) Internal work done (c) Both internal and external work (d) None

Last Answer : (b) Internal work done

Stiffness of material is measured by, A. Proportional unit B. Modules of elasticity C. Stress/ strain

Description : Stiffness of material is measured by, A. Proportional unit B. Modules of elasticity C. Stress/ strain

Last Answer : B. Modules of elasticity

A bar L metre long and having its area of cross-section A, is subjected to a gradually applied tensile load W. The strain energy stored in the bar is (A) WL/2AE (B) WL/AE (C) W²L/AE (D) W²L/2AE

Description : A bar L metre long and having its area of cross-section A, is subjected to a gradually applied tensile  load W. The strain energy stored in the bar is  (A) WL/2AE (B) WL/AE (C) W²L/AE (D) W²L/2AE

Last Answer : (D) W²L/2AE

In the strain energy method of slope and deflection ,load is applied a. gradually b.suddenly c.with an impact. d.None.

Description : In the strain energy method of slope and deflection ,load is applied a. gradually b.suddenly c.with an impact. d.None.

Last Answer : c.with an impact.

In the context of strategic management, stakeholders can be defined as: A. An individual or group with a financial stake in the organization B. An external individual or group that is able to impose constraints on the organization C. Internal groups or individuals that are able to influence strategic direction of the organization D. An individual or group with an interest in the organization's activities and who seeks to influence them

Description : In the context of strategic management, stakeholders can be defined as: A. An individual or group with a financial stake in the organization B. An external individual or group that is able to ... individual or group with an interest in the organization's activities and who seeks to influence them

Last Answer : Internal groups or individuals that are able to influence strategic direction of the organization

In the context of strategic management, stakeholders can be defined as: A. An individual or group with a financial stake in the organization B. An external individual or group that is able to impose constraints on the organization C. Internal groups or individuals that are able to influence strategic direction of the organization D. An individual or group with an interest in the organization's activities and who seeks to influence them

Description : In the context of strategic management, stakeholders can be defined as: A. An individual or group with a financial stake in the organization B. An external individual or group that is able to ... individual or group with an interest in the organization's activities and who seeks to influence them

Last Answer : Internal groups or individuals that are able to influence strategic direction of the organization

Shortly after purchasing a product, the postpurchase evaluation may result in cognitive dissonance. Cognitive dissonance is best defined as A)the congruence between external and internal searches for product information. B)satisfaction with the purchase. C)the establishment of criteria for comparing products. D)doubts that occur because the buyer questions whether the decision to purchase the product was right.

Description : Shortly after purchasing a product, the postpurchase evaluation may result in cognitive dissonance. Cognitive dissonance is best defined as A)the congruence between external and internal searches for ... occur because the buyer questions whether the decision to purchase the product was right.

Last Answer : D)doubts that occur because the buyer questions whether the decision to purchase the product was right.

The authors believe there are three tests that can be applied to judge whether a strategy is 'good'. These are: A. Fit, distinctiveness, sustainability B. Fit, internal resources, external environment C. Distinctiveness, internal resources, fit D. Sustainability, distinctiveness, external environment

Description : The authors believe there are three tests that can be applied to judge whether a strategy is 'good'. These are: A. Fit, distinctiveness, sustainability B. Fit, internal ... , external environment C. Distinctiveness, internal resources, fit D. Sustainability, distinctiveness, external environment

Last Answer : Fit, internal resources, external environment

The authors believe there are three tests that can be applied to judge whether a strategy is 'good'. These are: A. Fit, distinctiveness, sustainability B. Fit, internal resources, external environment C. Distinctiveness, internal resources, fit D. Sustainability, distinctiveness, external environment

Description : The authors believe there are three tests that can be applied to judge whether a strategy is 'good'. These are: A. Fit, distinctiveness, sustainability B. Fit, internal ... , external environment C. Distinctiveness, internal resources, fit D. Sustainability, distinctiveness, external environment

Last Answer : Fit, internal resources, external environment

The principle of virtual work can be applied to elastic system by considering the virtual work of (A) Internal forces only (B) External forces only (C) Internal as well as external forces (D) None of the above

Description : The principle of virtual work can be applied to elastic system by considering the virtual work of (A) Internal forces only (B) External forces only (C) Internal as well as external forces (D) None of the above

Last Answer : (C) Internal as well as external forces

Absence of clearly defined crystal lamina dura is because: A. Pathognomonic of periodontal disease B. Indicative of attachment loss C. Associated with periodontal pocket D. Commonly related to radiograph angulation

Description : Absence of clearly defined crystal lamina dura is because: A. Pathognomonic of periodontal disease B. Indicative of attachment loss C. Associated with periodontal pocket D. Commonly related to radiograph angulation

Last Answer : D. Commonly related to radiograph angulation

Which of the following is true regarding preparation of custom tray for elastomeric impression: a. Adhesive is preferred over perforation. b. Perforation provides adequate retention c. Adhesive is applied immediately before procedure d. Perforations are not made in the area over the prepared tooth .

Description : Which of the following is true regarding preparation of custom tray for elastomeric impression: a. Adhesive is preferred over perforation. b. Perforation provides adequate retention c. Adhesive is ... before procedure d. Perforations are not made in the area over the prepared tooth .

Last Answer : a. Adhesive is preferred over perforation.

The adhering of tissues on the surgical electrode usually means: A. Current intensity is too high B. Current intensity is too low C. Dispersion plate not applied to patient D. None of the above

Description : The adhering of tissues on the surgical electrode usually means: A. Current intensity is too high B. Current intensity is too low C. Dispersion plate not applied to patient D. None of the above

Last Answer : B. Current intensity is too low

Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent formation of an “overhang” D. Provide adequate physiological contour for the proximal surface E. Provide an acceptable surface texture to the proximal surface F. All of the above

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

What is true in treating a patient with secondary herpes simplex:** A. Acyclovir inhibits viral transcription when applied in the prodromal phase B. Idoxuridine is better than acyclovir when applied topically C. Antivirals are contra indicated in immuno-compromised patient

Description : What is true in treating a patient with secondary herpes simplex:** A. Acyclovir inhibits viral transcription when applied in the prodromal phase B. Idoxuridine is better than acyclovir when applied topically C. Antivirals are contra indicated in immuno-compromised patient

Last Answer : A. Acyclovir inhibits viral transcription when applied in the prodromal phase

Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with conventional complete denture C. Alveolar bone resorption is reduced D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

.Which of the following is true regarding preparation of custom tray for elastomeric impression: A. Adhesive is preferred over perforation B. Perforation provides adequate retention C. Adhesive is applied immediately before procedure D. Perforations are not made in the area over the prepared tooth

Description : .Which of the following is true regarding preparation of custom tray for elastomeric impression: A. Adhesive is preferred over perforation B. Perforation provides adequate retention C. Adhesive is ... immediately before procedure D. Perforations are not made in the area over the prepared tooth

Last Answer : A. Adhesive is preferred over perforation

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of fluoride in solutions B. Raise the PH of the fluoride solution C. Increase the exposure time to topical fluoride D. Pre-treat the enamel with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH

Description : Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of ... with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH

Last Answer : B. Raise the PH of the fluoride solution

The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram

Description : The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram

Last Answer : (d) Trust diagram

Frankfort plane extends from, A. horizontally from Sella to nasion B. Sagittal from …. C. Horizontally from point on superior aspect of external auditory meatus to orbitale

Description : Frankfort plane extends from, A. horizontally from Sella to nasion B. Sagittal from …. C. Horizontally from point on superior aspect of external auditory meatus to orbitale

Last Answer : C. Horizontally from point on superior aspect of external auditory meatus to orbitale

If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Last Answer : b.parallel to the nearest external surface

Which of the following IS NOT RECOGNISED on HIV patients: A. Squamous cell carcinoma B. HIV gingivitis C. Osteosarcoma D. External lymphoma E. Kaposi sarcoma

Description : Which of the following IS NOT RECOGNISED on HIV patients: A. Squamous cell carcinoma B. HIV gingivitis C. Osteosarcoma D. External lymphoma E. Kaposi sarcoma

Last Answer : C. Osteosarcoma

At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Description : At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Last Answer : C. Obtuse angle

In regard to external resorption:** A. Continues after successful endo treatment B. Stops in most cases following successful endodontic treatment C. Continues only in mandibular incisors after successful endo treatment D. Stops in maxillary lateral incisors after successful endodontic treatment E. None of the above

Description : In regard to external resorption:** A. Continues after successful endo treatment B. Stops in most cases following successful endodontic treatment C. Continues only in mandibular incisors after ... D. Stops in maxillary lateral incisors after successful endodontic treatment E. None of the above

Last Answer : B. Stops in most cases following successful endodontic treatment

At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°

Description : At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°

Last Answer : B. An obtuse angle si es el cajon proximal

causes of leaf deformity in mature gardenia shrubs

Description : causes of leaf deformity in mature gardenia shrubs

Last Answer : Gardenias are desirable for their large ornamental flowers, as well as for their pleasant fragrance. These flowering shrubs are tropical in nature and can be grown outdoors in warm climates or indoors in ... fall and make sure your gardenia is located in full sunlight. I hope this helps. -Birdy

Painful skeletal deformity called itai-itai is caused due to

Description : Painful skeletal deformity called itai-itai is caused due to

Last Answer : Painful skeletal deformity called itai-itai is caused due to A. Cd B. Hg C. CO D. `NO_(2)`

What is the meaning of deformity?

Description : What is the meaning of deformity?

Last Answer : A deformity is a disfigurement.

Cancer is a disease where we find uncontrolled - (1) cell division (2) cell swelling (3) cell inflammation (4) cell deformity

Description : Cancer is a disease where we find uncontrolled - (1) cell division (2) cell swelling (3) cell inflammation (4) cell deformity

Last Answer : (1) cell division Explanation: Cancer is the uncontrolled growth of abnormal cells in the body. Cancerous cells are also called malignant cells. Symptoms of cancer depend on the type and location of the ... when cells forget how to die. The most common cause of cancer-related death is lung cancer.

When the nurse notes that the patient’s left great toe deviates laterally, she recognizes that the patient has a a) hallux valgus. Hallux valgus is commonly referred to as a bunion. b) hammertoe. Hammertoes are usually pulled upward. c) pes cavus. Pes cavus refers to a foot with an abnormally high arch and a fixed equinus deformity of the forefoot. d) flatfoot. In flatfoot, the patient demonstrates a diminished longitudinal arch of the foot.

Description : When the nurse notes that the patient's left great toe deviates laterally, she recognizes that the patient has a a) hallux valgus. Hallux valgus is commonly referred to as a bunion. b) ... the forefoot. d) flatfoot. In flatfoot, the patient demonstrates a diminished longitudinal arch of the foot.

Last Answer : a) hallux valgus. Hallux valgus is commonly referred to as a bunion.

Which of the following mitral valve conditions generally produces no symptoms? a) Prolapse Mitral valve prolpase is a deformity that usually produces no symptoms and has been diagnosed more frequently in recent years, probably as a result of improved diagnostic methods. b) Stenosis Mitral valve stenosis usually causes progressive fatigue. c) Regurgitation Mitral valve regurgitation, in its acute stage, usually presents as severe heart failure. d) Infection Mitral valve infection, when acute, will produce symptoms typical of infective endocarditis.

Description : Which of the following mitral valve conditions generally produces no symptoms? a) Prolapse Mitral valve prolpase is a deformity that usually produces no symptoms and has been diagnosed more ... ) Infection Mitral valve infection, when acute, will produce symptoms typical of infective endocarditis.

Last Answer : a) Prolapse Mitral valve prolpase is a deformity that usually produces no symptoms and has been diagnosed more frequently in recent years, probably as a result of improved diagnostic methods.

Cancer is a disease where we find uncontrolled (1) cell division (2) cell swelling (3) cell inflammation (4) cell deformity

Description : Cancer is a disease where we find uncontrolled (1) cell division (2) cell swelling (3) cell inflammation (4) cell deformity

Last Answer : cell division

The angle of friction is a.The angle which frictional force makes with the normal b.The anle at which the force applied from external souce will cause movement c.The angle at which fictional force is inclined to external force d.The angle between the normal reaction and the resultant of normal reaction and the limiting friction e.None of the above

Description : The angle of friction is a.The angle which frictional force makes with the normal b.The anle at which the force applied from external souce will cause movement c.The angle at which fictional ... the normal reaction and the resultant of normal reaction and the limiting friction e.None of the above

Last Answer : d. The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

Traditional Work Breakdown Structures tend to a. focus on the design of the system as oppose to the needs of the current phase and iteration b. force too many levels of detail early on for large project and they tend to allow too few level of detail for small projects c. be too specific for the project and difficult to compare across projects d. all of the above e. none of the above

Description : Traditional Work Breakdown Structures tend to  a. focus on the design of the system as oppose to the needs of the current phase and  iteration  b. force too many levels of detail early on for large ... project and difficult to compare across projects  d. all of the above  e. none of the above

Last Answer : d. all of the above

What is the most common fracture of Class II amalgam restorations: A. Isthmus because of insufficient depth B. Internal fracture C. Marginal ridge site

Description : What is the most common fracture of Class II amalgam restorations: A. Isthmus because of insufficient depth B. Internal fracture C. Marginal ridge site

Last Answer : A. Isthmus because of insufficient depth

Internal resorption is, A. Radiolucency over unaltered canal B. Usually in a response to trauma C. Radiopacity over unaltered canal

Description : Internal resorption is, A. Radiolucency over unaltered canal B. Usually in a response to trauma C. Radiopacity over unaltered canal

Last Answer : B. Usually in a response to trauma

A pressure conduit laid underground, may not be subjected to (A) Internal pressure of water (B) Pressure due to external load (C) Longitudinal temperature stress (D) Longitudinal stresses due to unbalanced pressure to bends

Description : A pressure conduit laid underground, may not be subjected to  (A) Internal pressure of water  (B) Pressure due to external load  (C) Longitudinal temperature stress  (D) Longitudinal stresses due to unbalanced pressure to bends 

Last Answer : (C) Longitudinal temperature stress 

The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm for an eccentric load 100 t for non-development of tension, is (A) 2.75 cm (B) 3.00 cm (C) 3.50 cm (D) 4.25 cm

Description : The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm  for an eccentric load 100 t for non-development of tension, is  (A) 2.75 cm  (B) 3.00 cm  (C) 3.50 cm  (D) 4.25 cm

Last Answer : (D) 4.25 cm